Hi,
I upgraded to Android 5.0.2 today.
Before upgrading, the lock screen would ask for a PIN right away.
Right after hitting the power button I could type the PIN.
After the upgrade, I need to swipe the padlock in order to
getting to see the number keyboard and the PIN field.
Any way to have the num keys right away like it was before
and avoid the time wasting swipe?
Thanks
v
Related
Hi all
Now I've set the device to ask a pin code to lock the device after 30 minutes of being not used. Isn't there an option/way so the pin lock is immediately active when I want it to be (like pushing some seconds on the end button), using another hardware button or by executing some file?
I've tried to map '"\Windows\Keylock.exe" /toggle' to a hardware key (with an timeout of 0 minutes in settings - lock), but that just prompts the way the/which keys should be locked, as if you would execute keylock.exe without the '/toggle' parameter.
The question is.. what invokes the pin unlock screen to appear?
PS: best wishes for 2008!
hold end call for 3 seconds!
ekw, thanks for you answer but
pushing the end call button:
- doesn't activate/show the pin lock screen,
- any "child who can read" knows howto unlock the device.
the thing is that if it gets stolen, they need to do a hard reset so sensitive data (putted on the device instead of the SD) will be erased
I already tries S2U2 but that locks the device in the same 'security' level as pushing the end call button for some seconds and it mentions howto unlock it
fyi: having the HTC TyTN II with HTC stock ROM (dutch)
Instant PIN Security
As noted in the first post, is there a way to get the phone to security lock on command, where you have to enter the pin to use it again?
I know you can hold down the end call button and get it to screen lock, but is there a way to get it to go into security lock?
I would like to turn the automatic settings off, so that the phone ONLY goes into security lock when I say it does, or, set it so that it only does it automatically like every three hours. That way, I can set it to go into security lock more often if I wish to.
Thanks!
if you turn the screen off using the power button,m and back on, does the lock not activate?
Or have you not told it to lock when waking from standy?
flashy said:
if you turn the screen off using the power button,m and back on, does the lock not activate?
Or have you not told it to lock when waking from standy?
Click to expand...
Click to collapse
That works if you set auto lock on 0 minutes, but then you have to enter the PIN each and every time you turn the thing on. He wants it to lock only when he presses a lock key.
I unfortunately don't know of anything that does it.
kilrah said:
That works if you set auto lock on 0 minutes, but then you have to enter the PIN each and every time you turn the thing on. He wants it to lock only when he presses a lock key.
I unfortunately don't know of anything that does it.
Click to expand...
Click to collapse
Exactly. Thank you for your comments.
I don't want to have to enter the PIN every time I turn it on. Well, I know I can set it for an hour or longer and that would be fine.
But I want to be able to put it down, with the PIN code enabled, without worrying about random prying eyes looking into it or using it.
Anyone else have any thoughts??
YESTERDAY my phone locked when i turned hit the power button. i havent used a password device lock since i got the phone months ago so i have no clue how it happened. no passwords would work but i simple soft reset solved the problem.
TODAY i noticed that i didn't have a data connection like usual, since i always have push email running. opened up active sync and all server info was missing.
all i did was a system restore and got everything back to normal.
I have never had any of these problems and i figure i would share them with you in case its a bug of some sort.
every now and then my phone will say its locked; i am unsure if its a button i hit or what; but i then have to use my stylus to be able to hit the small icon that says unlock (or something like that) (it is frustrating when you are driving and the phone becomes lock and you are trying to hit that small icon with you finger to unlock it).
I must say though i have never entered a password for locking nor has my phone required to enter a password when it says it has become locked; but still is wierd that sometimes my phone says its locked and i have to exit out of the lock through the small icon (which is difficult to hit with your finger)......
hello77 said:
every now and then my phone will say its locked; i am unsure if its a button i hit or what; but i then have to use my stylus to be able to hit the small icon that says unlock (or something like that) (it is frustrating when you are driving and the phone becomes lock and you are trying to hit that small icon with you finger to unlock it).
I must say though i have never entered a password for locking nor has my phone required to enter a password when it says it has become locked; but still is wierd that sometimes my phone says its locked and i have to exit out of the lock through the small icon (which is difficult to hit with your finger)......
Click to expand...
Click to collapse
your situation is probably that you are holding in the red phone button too long. that will lock the phone. mine on the other hand locks and asks for a password.
You know, I had this today. Got my phone out and the screen was much darker than normal. After a bit of prodding I noticed the left softkey had changed to "unlock".
I have no idea why this happene, though just tried holding down the red button as you said and it did indeed lock. How strange!
Yep. Holding the END key results in your phone locking. I used to use this method to lock my phone before S2U2 did it for me.
I believe pretty recently, someone found a way to re-map holding the END key. Do a bit of searching and I'm sure you'll find it.
FYI- back to the topic. has anyone experienced either situation?
Okay, I'm having an odd one and searching around here for about three hours yielded me nothing, so I'm going to lay it down here:
The keylock on my Diamond fails to function at all. I've got the New SwiftBL Diamond ROM 6.0 installed since yesterday, and I think that is also when this started. I will also post this in the ROM's topic.
I checked the following settings:
- Settings, Long Press End Key is set to Automatically Execute: Lock Devie
- Settings, Key Lock is set to Lock all buttons except Power button.
I get no error messages, the only thing I see when holding the End Key is a short flicker of the screen, after which the Home Screen comes up. Do note that the keys are not appropriately locked.
I do not wish to use S2U2, and I am wondering why locking my device does not work. Anyone having any ideas?
you get this is you put a pin or password to protect your diamond and use one of the cooked roms, most roms have this bug now and i'm yet to find a fix other then to remove the password/pin completly
yeah, i have had this issue, its the rom. just let swiftblade know and wait for the next release
Able to lock (with issue)
Hi, I agree this is a bug. I configured my exchange account and have the lock policy enforced by my server. With the stock ROM there was no problem at all. But after the upgrade to the RUU_Diamond_HTC_WWE_2.03.405.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship ROM, the Long Press End Key no longer works to lock the device (the screen flicks).
I found a **workaround** (but not solution ). Long press the end key (as you normally would) and wait for the screen flick, press the power button (it have to be the first key touched after the screen flick). That's all, the device should be locked now.
Hey everyone,
I encrypted my phone and installed MobileIron to get work email and calendar. Ended up removing it all and decrypting phone after a few weeks. Since then, my phone isn't locking when the screen times out. If can be sitting with a black screen, but soon as I touch the home button it's awake and ready for action. It seems to lock eventually after sitting for an indeterminate amount of time.
Where the heck is the setting to control how long the phone waits before locking (requiring swipe or pin, not just turning off screen)? I know when I had the phone encrypted I found it and changed it to like 15 minutes so I didn't have to enter my 8 digit pin every couple of minutes, but now that its decrypted I am either blind or that setting is gone....
Thanks in advance.
UnexplainedBacon said:
Hey everyone,
I encrypted my phone and installed MobileIron to get work email and calendar. Ended up removing it all and decrypting phone after a few weeks. Since then, my phone isn't locking when the screen times out. If can be sitting with a black screen, but soon as I touch the home button it's awake and ready for action. It seems to lock eventually after sitting for an indeterminate amount of time.
Where the heck is the setting to control how long the phone waits before locking (requiring swipe or pin, not just turning off screen)? I know when I had the phone encrypted I found it and changed it to like 15 minutes so I didn't have to enter my 8 digit pin every couple of minutes, but now that its decrypted I am either blind or that setting is gone....
Thanks in advance.
Click to expand...
Click to collapse
First thing is to go to settings > lockscreen > screen lock and change it to pin or swipe or something other than swipe until your device recognizes when you've locked it. If it starts locking with the pin engaged go back and turn it to swipe and see if it locks on its own again. Second I imagine that it locks when you press the power button to turn the screen off? Set your screen timeout to an obscenely high number so that you remember and get in the habit of locking the device by pressing the power button. This is just for habit because Android (the base system) engages the lockscreen when the power button is pressed and the screen is on. If you are running a custom ROM you could dirty flash to put system settings back to default and if you are on stock out of the box you may have to factory reset to get settings back to their default state. I know that last one is less than optimal, but if the first two options (changing the lockscreen type and locking manually) are not a good work around then you will either have to do the encryption routine again to see if it fixes it and if it doesn't then you may have to factory reset.
I just recently purchased a Nexus 6 project FI phone that was on sale and have been encountering a weird issue: whenever I lower the brightness down all the way and try to hit the power button to unlock, the lock screen flashes for a second and goes back to black and I'm not able to unlock it. What's weird is it still registers my touches because it vibrates as if I was swiping for my unlock pattern. The only solution to this is to keep hitting the power button quickly until the screen finally decides to turn on.
The build is LYV48h running 5.1.1 and rooted/unlocked
Has anyone run into this issue, and if so what can I do to fix it? My next plan is to factory reset it and see if that helps at all
Thanks for your help!