Does somebody know yet if this device needs pin4 and pin5 connected (ground) for fast-charging on micro-usb?
On my kaiser I needed to connect these two to be able to charge in my car with my standard USB-charger.
To keep this charger as a universal charger (hope its 2 Amperes won't fry my HD2), I need to buy new cables or a mini-usb to micro-usb adapter and might need to modify them.
I noticed that the battery on my kaiser was getting fairly hot on this 2amps. Is there a protecting circuit, or is this in a safe range for those batteries?
amperes of you charger are max current, wchich you cat have from the charger... it is all about, how much leo will take it is about voltage...
and sorry, no idea about this connectivity... if you will tell me, how to check this, i will check it for you...
So, if I understood correctly, the device determines how much Amps to be drawn?
If you take the wall-charger and you look onto the micro-usb plug:
Code:
_____________
\ , , , , , /
\_________/
PIN: 5 4 3 2 1
For a Kaiser device to fastcharge , pin 5 and 4 must be connected together.
On normal USB-cables (micro and mini) for data, pin4 has no function, it isn't even wired in the cable.
Do you have a volt-meter to check this?
Thanks!
USB A male to micro USB A male cable versus USB B cable?
Hello guys,
I bought my HD2 yesterday ! I am very happy with it.
I would like to buy 2 more cables on ebay (1 for the office, 1 for home).
Should I buy the
- USB A male to micro USB A male cable
OR
- USB A male to micro USB B male cable
I am a bit confused here.
I see 2 types of cables on ebay, not sure which one to buy!
Any ideas?
Thanks
If my assumptions are correct, and the cables work like on the Kaiser device, it's:
- USB A male to micro USB A male cable (for fast-charging, works with generic-usb car charger - NO data connection)
edit: WRONG, because micro-A-plug is not compatible with micro-B-socket.
- USB A male to micro USB B male cable (for data-connection and slow USB-charging)
Still needs confirmation by an HD2-user, but I don't think HTC changed something going from mini to micro-plug. (I think they dropped EXT-usb design for having an extra 3,5mm headset-jack instead. - but that shouldn't confuse you)
Well, not exactly:
Type A is to be plugged into host-device (the one supplying power to the other device, usually the charger or your computer), whereas type B is to be plugged into the target device (in this case, the HD2).
This typology exists to prevent you from linking two power suppliers at both ends of the cable...
So what you need is a "USB Type A to Micro USB Type B" cable
That's the original USB-specs, you are referring to.
Mini/micro-A-plugs are using pin4-to-ground by these USB-spec, for electronically differenciating these.
What I wanted to pinpoint, is that HTC decided to mark pin4-to-ground for detection of their charging equipment.
And since micro-A plugs fit into micro-B sockets, you should be able to use a "USB A male to micro USB A male cable" for your charging needs (without modifying your micro-B cable, which can be quite tricky because of its size)
edit: I was wrong with that, it's the other way round, sry. Does the HD2 have a AB-socket then? I believe it's a regular B-socket.
Then if I stand correctly, you will still need a special modified micro-B-cable for charging.
To make it even more difficult, HTC-design does not charge the Kaiser with a regular mini-b-cable on a car-charger, because there was no data-signal on it.
My intention of this thread was asking, if this behavior has changed when going from mini to micro-usb design, and is still an unanswered question.
sayborg said:
Hello guys,
...
I would like to buy 2 more cables on ebay (1 for the office, 1 for home).
Should I buy the
- USB A male to micro USB A male cable
OR
- USB A male to micro USB B male cable
I am a bit confused here.
I see 2 types of cables on ebay, not sure which one to buy!
Any ideas?
Thanks
Click to expand...
Click to collapse
...same for me. may I have a clear and "safe" answer for dummie?
- USB A male to micro USB A male cable
OR
- USB A male to micro USB B male cable
Thanks a lot.
only USB-B-male fit into the device, boy!
Well, I've seen unboxing videos now, and the wall-charger ... is a normal-USB-plug-in device like a car-charger. Seems that my intention of this thread is obsolete.
is it possible to use a USB gamepad with the tablet? what kind of adapter would be needed?
You would need to construct an OTG cable, or use the hdmi dock.
Dell has never made an official OTG cable
You would probably need a PDMI to USB adapter, but I don't think any exist.
what if i use a female to female usb adpater like this one http://www.ebay.com/itm/NEW-USB-2-0-FEMALE-FEMALE-F-F-ADAPTER-CONNECTOR-/280732594049?pt=LH_DefaultDomain_0&hash=item415cf76f81#ht_2429wt_1041
Those are a great way to damage both devices being plugged into it, they're not normally made for a reason
Hi,
So I'm wondering if it's possible to connect a android RCA adaptor using a "female mini b to female usb" connector to my Nook HD AND if it's possible to charge my Nook HD while using USB host mode via a OTG charge cable.
The first idea, connecting my Nook HD to my TV via RCA would use the following:
Nook HD ---> OEM Nook Charge cable ---> Female USB to Female USB gender changer ---> Male USB to Female Micro B ---> Male Micro b to RCA ---> TV
Second idea, charge my Nook HD while using USB host mode would use the following:
Nook HD ---> OEM Nook Charge cable ---> Female USB to Female USB gender changer ---> Male USB to Female Micro B ---> OTG charge cable with Male Micro B at one end, a Male USB connected to Nook Charger at another end, and a Female USB connected to some supported device
Any ideas if any of my own ideas above would even work, I'm tempted to buy all those cables just to see but wanted to ask in case I might be risking shorting something out.
I just bought a hard drive to connect to my nexus 10, but like an idiot, I didn't realize it was a USB 3.0 drive. I have an OTG cable. I am wondering if there is a way for me to externally power the hard drive. It has a single USB 3.0 female plug. Hopefully the attached picture can explain better what it is that I want to do.
I wonder if this would work
http://www.amazon.com/HDE®-Male-USB-Micro-B-Cable/dp/B006C0S2JS
I could connect the USB 3.0 connector (right-most) to the HD, the blue Type-A connector (left-most) to the OTG cable and the other USB (center) to a USB hub or power supply. Anyone have any experience with this type of thing?
MrGibbage said:
I wonder if this would work
http://www.amazon.com/HDE®-Male-USB-Micro-B-Cable/dp/B006C0S2JS
I could connect the USB 3.0 connector (right-most) to the HD, the blue Type-A connector (left-most) to the OTG cable and the other USB (center) to a USB hub or power supply. Anyone have any experience with this type of thing?
Click to expand...
Click to collapse
Did it work?
Ok I'm in awe of why there is no dock or adapter for slimport as for mhl. With hdmi, usb, memory card slot. Ive been looking and thinking could you use this Micro USB Male to USB Female Host OTG Cable + Micro USB Adapter Y Splitter, then get the slimport hdmi adapter. Or does only one work at a time?