These are the official MOB31E OTA links, captured via MOB30W using various Oem.prop collected from all A1 devices. Huge thanks to @1cefire all the Oem.prop collection.
*THIS IS GONNA BE THE LAST OTA FOR SPROUT*
So, NO more OTA's from Google. [Not yet confirmed, let's see]
So, all in one place - - Android one OTA's??
KPX44 || LMY47O || LMY47V || LMY48K || LMY48M || MRA58M || MRA58N || MMB29K || MMB29O || MMB29Q || MMB29V || MOB30D || MOB30G || MOB30N || MOB30Q || MOB30W || MOB31E
Evercoss a65 [SPROUT8] - - MOB31E FROM MOB30W
Mito A10 [SPROUT8] - - MOB31E FROM MOB30W
Sparkle v [SPROUT4] - - MOB31E FROM MOB30W
Myphone Uno [SPROUT4] - - MOB31E FROM MOB30W
MMX a1 [SPROUT4] - - MOB31E FROM MOB30W
H940 [SPROUT8] - - MOB31E FROM MOB30W
Mmx aq4502 [SPROUT8] - MOB31E FROM MOB30W
Nexian Mi-438s [SPROUT8] - - MOB31E FROM MOB30W
QMobile A1 [SPROUT8] - - MOB31E FROM MOB30W
Roar_A50 [SPROUT4] - - MOB31E FROM MOB30W
Spice dream uno [SPROUT4] - - MOB31E FROM MOB30W
Flashble Stock MOB31E images :-
Stock MOB31E Sprout4 Rom - AFH || Mirror2 [Google_drive]
Stock MOB31E Sprout8 Rom - AFH || Mirror2 [Google_drive]
Stock MOB31E Sprout4 Boot image - AFH || Mirror2 [Google_drive]
Stock MOB31E Sprout8 Boot image - AFH || Mirror2 [Google_drive]
Stock MOB31E Sprout4 Recovery - AFH || Mirror2 [Google_drive]
Stock MOB31E Sprout8 Recovery - AFH || Mirror2 [Google_drive]
Huge thanks to Joseph Godslave for all the flashable zips.
Huge thanks to @1cefire for his awesome Twrp
Mmx aq4502, Evercoss a65, Mito a10, spice uno, Roar_A50 & Qmobile A1 captured by Joseph Godslave
Sparkle v, MyPhone uno, Mmx a1, H940 & "Nexian Journey one Captured by Me
Installation >
How can i install this ota via stock recovery? [for those who on full stock, no root]
Just download appropriate OTA zip according your device, goto stock recovery, choose install update from SD card, choose zip, wait until it finish.....
After installation hit reboot system now.
How can i boot into stock recovery?
Follow below steps to boot into stock recovery : - Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery Code: Installation Instructions : - Download the appropriate OTA for your device - Place the OTA zip to your sdcard - Reboot to stock/custom recovery - Make a backup (just in case) - Perform a Factory reset.. Wipe data, dalvik, cache and system (recommended) - Locate the file and install - Reboot... It may take about 10-15 minutes so be patient Code: Follow below steps to boot into stock recovery : - Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery
My phone is rooted, how can I install this OTA?
Just install this recovery Here
Next, download appropriate OTA zip, reboot recovery > Choose advanced >choose ota installer > choose install zip> locate downloaded ota Zip >swipe to confirm flash >wait, let it install Voila! After successful installation hit reboot!
I had modified my system, such as build.prop and other sound mods, will it affect / broke ota installation?
Yep. It'll will broke the installation process, since you've modified the build prop and system, it'll surely give you error, so I'm requesting you to please roll back to stock build prop from here
Sprout4 / Sprout8 [These build.props are flashable zips now, so all you need to do is just flash them and then try installing ota it's gonna install without errors. And Uninstall if you've any sound mods installed, then attempt the installation, it's gonna update successfully!
Note=This method works with systemless as well as system mode root, you can flash this ota over custom kernel too.
I've xposed and Layers theme installed, how can I successfully install this OTA?
FYI, just Uninstall xposed framework & layers theme, then apply OTA, it's gonna install successfully!
How can i re-root my devices, after installation of ota zip?
Yes, just reboot after installation of Official ota, after a successful boot, again boot back into that twrp recovery, simply flash custom boot image [custom kernel] followed by Super su 2.50 zip, wipe dalvik/Art [IF YOU wish] reboot. Done!
Yo, I'm using Sprout4 Rom on my Sprout8, which ota should I flash?
Nothing to worry!
Just download Sprout4 ota and flash it.
Compatibility ?
Any Sprout4 OTA over Sprout4
Any sprout8 OTA over Sprout8
Yay! There are links for full stock Roms, how can I flash them?
Yep, those links / zips are full stock Roms, if you're running on any build or running on any custom rom & wanna revert back to full stock with September security patch, then just download those zips, reboot recovery, perform a full wipe [Twrp> wipe > advanced > wipe everything except Micro_SD]
Then install that full stock rom zip, hit reboot key after installation!
Note>>Flash this MOB31E OTA zip Over MOB30W only!
sprout4 please
Utkarsh_Tiwari said:
sprout4 please
Click to expand...
Click to collapse
Please wait, just a initial rollout.
I'll update links, soon.
Wait a minute if sprout 4 and sprout 8 received marshmallow September security patch that means only few devices in Android one series will receive Android Nougat update, I'm not sure but it's sign.
DeepSahota said:
Wait a minute if sprout 4 and sprout 8 received marshmallow September security patch that means only few devices in Android one series will receive Android Nougat update, I'm not sure but it's sign.
Click to expand...
Click to collapse
Yes . Not only some ; al will . Nexus 6p and 6 also received mm september security patch . And we also . So we'll definitely get system updates real soon once the battery drain and other issues are fixed . Just wait . Google will release ota for n 6 , 6p and our device at the same time . They are just solving other qualcomm problems in order to move into the next phase .
Can i directly flash it with currently may patch installed?
thelostneutron said:
Can i directly flash it with currently may patch installed?
Click to expand...
Click to collapse
No, you can't.
Just install June, July, August Security patches and then proceed.
Either, DL Full Stock Rom and Flash it by performing a full wipe from twrp / philz.
Look OP for full stock Rom link.
Added GOOGLE DRIVE mirror links for the full stock Roms, stock boot images & stock recoveries!! :good:
Hi,
I just flashed full stock rom (sprout4) & i am able to use internal storage for saving images and audios. But I don't want that (i want app only internal storage). Any solution.
rajputmiles said:
Hi,
I just flashed full stock rom (sprout4) & i am able to use internal storage for saving images and audios. But I don't want that (i want app only internal storage). Any solution.
Click to expand...
Click to collapse
Hi,
Which phone do you have?
sachin n said:
Hi,
Which phone do you have?
Click to expand...
Click to collapse
Mmx Canvas A1 (AQ4501) (Sprout4)
Huh?
I think youve flashed sprout8 rom,just redownload sprout4 rom and flash it...
sachin n said:
Huh?
I think youve flashed sprout8 rom,just redownload sprout4 rom and flash it...
Click to expand...
Click to collapse
No, I've downloaded sprout4 rom.
Sprout 8 rom have file manager!!! I don't have that. So I'm pretty sure it's sprout4. And in afh rom is under nexian journey one folder??? Which is sprout8 I guess. I'm in doubt.
rajputmiles said:
No, I've downloaded sprout4 rom.
Sprout 8 rom have file manager!!! I don't have that. So I'm pretty sure it's sprout4. And in afh rom is under nexian journey one folder??? Which is sprout8 I guess. I'm in doubt.
Click to expand...
Click to collapse
Nah dude, it's just under Nexian folder, but it's for Sprout4* only.
Btw, a while ago I too flashed Sprout4 stock rom and its fine for me!
sachin n said:
Nah dude, it's just under Nexian folder, but it's for Sprout4* only.
Btw, a while ago I too flashed Sprout4 stock rom and its fine for me!
Click to expand...
Click to collapse
I don't what on the mother earth is happening with me. I flashed cm 13 snapshot again. And now also internal storage is using as image and audio storing. I am totally confused what has happened and how to correct it.
rajputmiles said:
I don't what on the mother earth is happening with me. I flashed cm 13 snapshot again. And now also internal storage is using as image and audio storing. I am totally confused what has happened and how to correct it.
Click to expand...
Click to collapse
Huh?
Can you gimme some attachments about which paths its using to save pics / files etc?
BTW, did you tried flashing ROM with a clean wipe Right? [ie; System, cache, dalvik, internal, data]
Probably that's also one of the reason!
sachin n said:
Huh?
Can you gimme some attachments about which paths its using to save pics / files etc?
Click to expand...
Click to collapse
Internal storage has created a new path as storage/emaluated/0
Yup. I clean installed it. Wiped everything except the Micro SD.
rajputmiles said:
Internal storage has created a new path as storage/emaluated/0
Yup. I clean installed it. Wiped everything except the Micro SD.
Click to expand...
Click to collapse
okay!
Don't blame me, just delete Downloaded Sprout4 stock ROM , and re-download sprout4 MOB31E stock ROM zip and perform a full wipe from twrp ,flash zip..
this might fix the issue!!
sachin n said:
okay!
Don't blame me, just delete Downloaded Sprout4 stock ROM , and re-download sprout4 MOB31E stock ROM zip and perform a full wipe from twrp ,flash zip..
this might fix the issue!!
Click to expand...
Click to collapse
I'm not blaming you sir. But I was just hoping you know the solution. I will figure it out. Thanks for help.
Related
OTA captured for MyPhone UNO LP 5.x.x
Download Link :
LBY29G to LMY47O (LP 5.1.0)
OFFICIAL OTA LMY47O For Stock Recovery
MODIFIED OTA LMY47O For Custom Recovery
LMY47O to LMY47V (LP 5.1.1)
OFFICIAL OTA LMY47V For Stock Recovery
UNIVERSAL OTA LMY47V for SPROUT4 and SPROUT8 (11+ MB)
LMY47V to LMY48K (LP 5.1.1)
UNIVERSAL OTA LMY48K for SPROUT4 users (Custom Recovery)
NOTE: Only compatible w/ Stock LP unmodified. If you are rooted and unlocked, try the Modified and Universal OTA and make sure to fully unroot your device before proceeding to prevent bootloop...No need to wipe data unless you encountered problems.
Official OTA : Original OTA from google without any modification
Modified OTA : updater-script was modified (OLD) (For MyPhone UNO Only)
Universal OTA : updater-script was modified to support all Android One 1st gen devices
Flashing Instructions:
• Download the file
• Place the OTA zip on your sdcard
• Reboot to stock recovery/custom recovery and install ota file
• Reboot and be patient
MD5 checksum
Official : 545d3ad27d47110fa62c19de3c8932fb
Modified : b27757151d666f8a1c0a47111da8e9c6
STOCK ROM : SPROUT
Flash at your own risk
Credits : google, xda, varun.chitre15, yuweng, carliv, AandreHartmen, GeloJuvida, JosephGodslave
.
Ohh !! Thank god it's finally here
I've been dying for this update
Tnx dude ur the best!!
Speaking of stock recovery... I don't have it. I replaced it with CWM. Can you provide one if possible? The one located in this thread is from KK, and makes the zip file think my phone (pun not intended) is still on KK. If you can't then I'll just wait for the rom instead.
staircases said:
Speaking of stock recovery... I don't have it. I replaced it with CWM. Can you provide one if possible? The one located in this thread is from KK, and makes the zip file think my phone (pun not intended) is still on KK. If you can't then I'll just wait for the rom instead.
Click to expand...
Click to collapse
Sadly, I forgot to backup the stock recovery of this device just flash the stock recovery of other android one devices such as the mmx canvas A1 http://forum.xda-developers.com/canvas-a1/development/official-stock-rom-canvas-a1-t2887150... or the cherry mobile one http://intersectraven.euroskank.com/stock/Android One/LBY29G/
This OTA will not work on Kitkat because its only 20+mb. The OTA for MMX Canvas A1 is advisable if you are on KK http://forum.xda-developers.com/cro...l/ota-micromax-official-ota-captured-t3058879. I will upload the stock rom tomorrow or on saturday.
Edit : Dude, make a backup and try to flash the Modified OTA
LMY47O to LMY47V (LP 5.1.1)
UNIVERSAL OTA LMY47V for SPROUT4 and SPROUT8 (11+ MB)
Credits to the one who captured the OTA links for Sparkle V and Symphony Roar A50...
I'm on stock canvas a1 with LP 5.1. Will my phone still be official and pure stock if I use the universal OTA?
UPDATE: I decided to go ahead and try. Downloaded universal ota for 4gb variant. Got these error messages. "failed to verify whole signature, signature verification failed, installation aborted".
-BRK- said:
I'm on stock canvas a1 with LP 5.1. Will my phone still be official and pure stock if I use the universal OTA?
UPDATE: I decided to go ahead and try. Downloaded universal ota for 4gb variant. Got these error messages. "failed to verify whole signature, signature verification failed, installation aborted".
Click to expand...
Click to collapse
All the 4gb variants OTA's have identical contents and signature except the updater-script. So Yes, your MMX A1 will still be official. The problem is you need custom recovery, there is an info on how to temporarily boot Custom Recovery on this forum. If you manage to do that, after flashing the OTA just reboot and your phone will still be unmodified with warranty Try that one bro
dear staircases,
i will check if i manage to extract the STOCK RECOVERY from the Nandroid backup i made then i hope i could email you. my build number is: LMY47V... (*I did the nandroid backup via devam03's wonderful tutorial: http://forum.xda-developers.com/cro...-stock-rom-t2948442/post59564925#post59564925)
hope to get back to you later,
bod68
Thanks sir
Android One Universal STOCK ROMs [M/LP/KK]
These ROMs are 100% Stock without any modification. Latest versions were backed up by the command "dd". LP versions were Identical from the official captured OTA LMY47O merge with the Official OTA. These roms are put together for rooted users who wants to fall back to google stock rom, And also for users who are having issues while installing the latest OTA. Nothing is removed from the original rom, and all signatures are intact. SPROUT8 LMY47V was based with the CM One fastboot images by @intersectRaven and captured Nexian Journey OTA LMY47V by Aandre Hartmen. KitKat Rom was based with the Official KPX44 MMX A1 Flashfile by moulnisky. Lastly, please take the time to read the instructions, FAQ, carefully and thoroughly before proceeding....
SPROUT4 [ M 6.x ] drive | Mirror [ LP 5.1.1 ] drive | d-h.st [ KK 4.4.4 ] drive | d-h.st
- Default Stock ROM for the following Android One devices
Micromax Canvas A1 AQ4501 (India)
Karbonn Sparkle V (India)
Spice Dream UNO (India)
MyPhone Uno (Philippines)
Symphony Roar A50 (Bangladesh)
- FEATURES
Move To SD [LP/KK]
Hidden Internal Storage (Apps only) [LP/KK]
If you are rooted, you may access your internal storage by navigating to "/data/media/0" [LP/KK]
SPROUT8 [ M 6.x ] drive | Mirror [ LP 5.1.1 ] drive | d-h.st [ KK 4.4.4 ] drive | d-h.st
- Default Stock ROM for the following Android One devices
Cherry Mobile One (Philippines)
Nexian Journey One (Indonesia)
Mito Impact (Indonesia)
Evercross One X (Indonesia)
Micromax Canvas A1 AQ4502 (India)
QMobile A1 (Pakistan)
- FEATURES
Internal Storage and SDcard are both accessible [LP Only]
No move to SD feature out of the box [LP Only]
move to SD feature is only available on Kitkat, Internal storage is not accessible [KK Only]
FLASHING PROCEDURE :
Download the ROM
Move the file to sdcard
Reboot to Custom Recovery
Install via Philz recovery if you want to fall back to stock recovery
Install via TWRP to stop the restoration of stock recovery
(ensure that "MOUNT SYSTEM PARTITION READ-ONLY" is uncheck)
Backup your current ROM (just in case)
No need to Wipe DATA (Read FAQ for more details)
Locate the file and install
Reboot... It will take about 10-15 minutes so be patient
Frequently Asked Questions :
1. Are they both compatible with my device?
Yes, as long as you are using an Android One first generation..
No need to unlock or re-lock bootloader
Install via custom recovery only
2. Will I still be able to recieve the official OTA updates in the near future?
Yes, as long as you have installed the default Stock ROM version for your device.
If you had installed Sprout4 over an Sprout8 device, the official OTA will fail due to mismatched signatures.
As long as you've never rooted and flash a custom recovery.
In case you have rooted your device, all you need to do is reflash the ROM when a new ota arrives and you'll be fine
3. Do I need to Wipe my Data and cache partitions before flashing the ROM?
Installing a sprout4 stock rom over an sprout4, no need to wipe anything.
Otherwise, if you flashed sprout4 over an sprout8 rom, you have to do a clean install.
Sprout4 to Sprout4 = No need to wipe data,cache partition
Sprout8 to Sprout8 = No need to wipe data,cache partition
Sprout4 to Sprout8 = Need to do a clean install, wipe data,cache,system
Sprout8 to Sprout4 = Need to do a clean install, wipe data,cache,system
If you are having apps FCs, try clearing the app data of the affected app, or try hard reset.
If all else fail, do a clean install.
4. How to install Stock ROM over a Custom ROM?
Backup your current ROM (just in case)
Its a Stock ROM, no need to downgrade or unroot your device
Install it like how you install your preferred Custom ROM for the first time
Do a clean install by wiping data, dalvik, cache and system
5. Got stuck with "Patching system image unconditionally"?
It might be a bad download
Always verify the hash prior to installation (check the howto verify the MD5sum below)
Wipe the system partition just in case
6. Why was my Custom Recovery perished?
If you flash the Stock ROMS using Philz Recovery 6.57.9. Your device will reverted back to Pure Stock including the Stock Recovery.
How to avoid this? If you have access to Aroma Filemanager using Philz, rename /system/bin/install-recovery.sh and /recovery-from-boot.p or flash superSU before rebooting your device.
Or simply use TWRP, prior to flashing the Stock ROM.
Just go back to Philz soon after the boot process was over if you wish to.
I prefer not to rename install-recovery.sh by default to give users an option to go back to stock recovery without providing a separate image of it.
7. For users who are having Irregular data connection and phone shows 'Emergency Calls Only'.
Go to Settings>More>Cellular networks>Access Point Name> then select the correct apn for your carrier.
If the problem still exists, go to Settings>More>Cellular network>Network Operator> then select the correct carrier.
WARNING!!!! PLEASE READ...
By installing the rom via philz recovery, android will automatically restore the stock recovery... Its a good thing for users who wants to go back to pure google stock rom.
WORKAROUND: If you wish to keep a Custom Recovery, and have access to Aroma Filemanager via Philz recovery, just rename /system/bin/install-recovery.sh and /recovery-from-boot.p, or simply flash superSU before rebooting your device.
I prefer not to rename install-recovery.sh by default to give users an option to go back to stock recovery without providing a separate image of it.
The simplest method to retain a custom recovery is to use TWRP prior to installation
Then flash Philz soon after the boot process was over if you wish to.
So basically.....
If you wish to be on Pure Stock with Stock Recovery... install it with Philz (CWM).
If you wish to be on Pure Stock and keep a Custom Recovery... install it with TWRP.
Recommended Recoveries
TWRP (SPROUT ALL) with Logo and OEM backup partition support
TWRP Materialize (SPROUT ALL)
TWRP Official (SPROUT4 ONLY)
Philz Recovery (Sprout ALL) flash this if you wish to go back to Philz Recovery
Stock Recovery (Sprout)
How to Root my device?
Just flash SuperSU with a custom recovery..
Or follow varuns rooting guide
MD5 Sum
[SPROUT4 MRA58M] c75b28612f0a77ac5fc27084da4b6558
[SPROUT8 MRA58M] 7e34ce53e6bee8bb8adf635a05e2db7a
[SPROUT4 LMY48K] c0bd0113a84fdd03a0c7f3d245d71b67
[SPROUT8 LMY48K] 705b56acb2159b0fa9f05a86e7818db4
[SPROUT4 LMY47V] 9f62914a94e9b0ec5abd445120bd3b7c
[SPROUT8 LMY47V] 0063e621f6ffed6d0fe142de7e502d4d
[KITKAT KPX44] 377ea840259be29aa3383ab1757a6ede
How to Verify the MD5 signature?
If you are running Windows just download HashTabs and install. Right click on the downloaded file then click properties and look for "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip". On your phone, just use ES explorer and then click properties then tap "Show Checksum" then compare the md5 hash. If the file hashes are identical you are good to go, Otherwise, redownload the file again due to bad probably.
Universal OTA
Intended for users who have limited bandwidth. Otherwise, use the stock roms.
Flash via custom recovery only
OTA MRA58N from MRA58M (M 6.0) UNIVERSAL
OTA MRA58N for SPROUT4 and SPROUT8 MRA58M users only
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY48M from LMY48K (LP 5.1.1) UNIVERSAL
OTA LMY48M for SPROUT4 and SPROUT8 LMY48K users only(7+ MB)
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY48K from LMY47V (LP 5.1.1) UNIVERSAL
OTA LMY48K for SPROUT4 and SPROUT8 LMY47V users only(18+ MB)
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY47V from LMY47O (LP 5.1.1) UNIVERSAL
OTA LMY47V for SPROUT4 and SPROUT8 LMY47O users only(11+ MB)
Unroot first...then flash via custom recovery...Credits to the one who captured the OTA links for Sparkle V and Nexian Journey One...
Click to expand...
Click to collapse
Flash at your own risk :good:
.
Credits : google, xda, varun.chitre15, OTA catchers, IntersectRaven, ghpranav, AHartmen, JGodslave, moulnisky, xpirt, rhar****, akhilnarang
.
will it work on stock micromax canvas a1? I've never rooted nor unlocked the bootloader. My phone is pure stock.
-BRK- said:
will it work on stock micromax canvas a1? I've never rooted nor unlocked the bootloader. My phone is pure stock.
Click to expand...
Click to collapse
it might work with locked bootloader, but it might not work with stock recovery. This ROM was based on Sparkle V OTA LMY47O + OTA LMY47V, 99% is unmodified except the updater-script to make the OTA fuse together and universal. So i am 100% sure it would work if you flash it thru custom recovery.
How to verify signature...??? Plz reply...
Vaibhavtheboss said:
How to verify signature...??? Plz reply...
Click to expand...
Click to collapse
If you are running windows os just download HashTabs and install. Right click on the downloaded file then click properties and click "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip" then compare the md5 hash. If the hash are identical you are good to go... If not, your file was corrupt
Done... flashed it through Philz recovery... everything fine... Now on Stock Android 5.1.1
Sent from my Sparkle V using XDA Free mobile app
Vaibhavtheboss said:
Done... flashed it through Philz recovery... everything fine... Now on Stock Android 5.1.1
Sent from my Sparkle V using XDA Free mobile app
Click to expand...
Click to collapse
Im glad it worked for you mate
installed an OTA for sprout8 all variant in my mito impact a10. but it stuck bootloop. any idea? I've installed stock kernel 5.1
Sent from my MITO_A10 using XDA Forums
mrahmanda said:
installed an OTA for sprout8 all variant in my mito impact a10. but it stuck bootloop. any idea? I've installed stock kernel 5.1
Sent from my MITO_A10 using XDA Forums
Click to expand...
Click to collapse
Which ota did you flash? factory reset might work. You have to unroot first before you flash any 11mb ota. If all else fail you could try the stock rom for SPROUT8 above, already updated to 5.1.1 and compatible with all sprout8 device such as mito impact. Just flash it thru custom recovery.
installed sprout 4 for my nexian journey one, it works like a charm
thank you so much :good:
1cefire said:
Which ota did you flash? factory reset might work. You have to unroot first before you flash any 11mb ota. If all else fail you could try the stock rom for SPROUT8 above, already updated to 5.1.1 and compatible with all sprout8 device such as mito impact. Just flash it thru custom recovery.
Click to expand...
Click to collapse
the universal one.
yes, i think it is a little bit odd. i can find solution for my case :/
but thanks anyway
Sent from my MITO_A10 using XDA Forums
Cant intall or open
Flashing via PhilzTouch and current installed rom is CM12.1
i cant install the Rom for Sprout 8 Cherry mobile One version
mahesoo said:
installed sprout 4 for my nexian journey one, it works like a charm
thank you so much :good:
Click to expand...
Click to collapse
mrahmanda said:
the universal one.
yes, i think it is a little bit odd. i can find solution for my case :/
but thanks anyway
Click to expand...
Click to collapse
You're welcome dudes
gestrinix said:
Cant intall or open....Flashing via PhilzTouch and current installed rom is CM12.1
i cant install the Rom for Sprout 8 Cherry mobile One version
Click to expand...
Click to collapse
If you can't open the file It was probably corrupt. Read back to post #5 and try to verify the md5 hash. I was running cm 12.1 before, and currently running SPROUT8 on my 4gb variant Myphone UNO... running smooth without any hiccups... If the hash is not identical, try redownloading the file. Here is the md5 checksum
[SPROUT8 MD5] 0063e621f6ffed6d0fe142de7e502d4d
SPROUT8 running on 4gb variant MyPhone Uno
Do you have stock recovery for 5.1.1 sprout8?
fachry_my_id said:
Do you have stock recovery for 5.1.1 sprout8?
Click to expand...
Click to collapse
You don't have to go back to stock recovery to flash the ROM. Just flash it thru custom recovery, Philz/TWRP works fine
After flashed this.. I lost philz custom recovery. When I tried to get into recovery, it shows broken android symbol
Kumarankav said:
After flashed this.. I lost philz custom recovery. When I tried to get into recovery, it shows broken android symbol
Click to expand...
Click to collapse
I guess what you saw was stock recovery. But the strange thing is this ROM does not include stock recovery. Are you sure you flashed the same ROM? maybe you flash a different one? This ROM is basically the same official OTA LMY47O from this thread and the official OTA LMY47V. I have flashed both ROMS a couple of times without problems... Anyhow, if you want to go back to custom recovery just install another one thru fastboot, allinonetools, flashify and so forth
Here's a proof... Only Boot.img (kernel) and System partition + OTA LMY47V are included
error update from 5.1 to 5.1.1 mito impact A10
II've tried to update mito a10 impact of LMY470 to LMY47V via ota always want to install the update error after ..
mito I've never been in the root ..
is there a solution?
Thanks
im using evercoss a65 and its work
tyvm
agUNg.XENOS.inc said:
II've tried to update mito a10 impact of LMY470 to LMY47V via ota always want to install the update error after ..
mito I've never been in the root ..
is there a solution?
Click to expand...
Click to collapse
Did you flash the OTA LMY47O from 4gb variants before? Or are you using custom recovery? The best way is to Join Mito Impact a10 FB group and ask them if they have Official Ota LMY47V for mito, just flash it with stock recovery once you have the official ota. If it fails to flash, try factory reset then flash the official ota again. If all else fail, just flash a custom recovery with fastboot method without rooting your device, then flash the SPROUT8 version in the OP.
morissax said:
im using evercoss a65 and its work
tyvm
Click to expand...
Click to collapse
welcome mate
MAKING A UNIVERSAL MARSHMALLOW OTA FOR ALL SPROUT4 DEVICES
NOTE : To install Android 6.0 Marshmallow on your sprout4 device , you should be on unrooted stock lollipop build LMY48M.
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE.
DO IT AT YOUR OWN RISK.!!!!
DOWNLOAD OTA UPDATE FROM HERE :- DOWNLOAD OTA HERE
After downloading OTA Update Follow the steps below :-
1. Unzip OTA Update zip to any folder.
2. Navigate to OTA_Update_Unzipped_Folder/META-INF/com/google/android/
3. You will updater-script file there
4. Now delete that file and download the modified updater-script file from below link and copy it there
DOWNLOAD FILE HERE
5. Now repack the rom in a zip file using winrar or winzip with compression method 'Store'.
6. Copy this rom in your phone and flash it using Touch Philz recovery
and Thats it!
You can flash this rom on any sprout4 device.
I have test this method on my phone and its works fine.
If you find any difficulty you can PM me.
IF THIS HELPS YOU THEN DONT FORGET TO HIT THANKS BUTTON:good:
Can I only do a clean flash of 6.0 update ?? {I'm on cm11 now that's why}
MrAman007 said:
Can I only do a clean flash of 6.0 update ?? {I'm on cm11 now that's why}
Click to expand...
Click to collapse
It is clearly mentioned in the thread thay you should be on unrooted stock lollipop build LMY48M
You can try this
http://forum.xda-developers.com/showpost.php?p=63162455&postcount=116
Nexian Journey One Sprout_b
https://android.googleapis.com/pack...sprout_b-nexian-mi438s-MRA58M-from-LMY48M.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are the official MOB30N OTA zips, captured via MOB30G using various oem.prop. Huge thanks to @1cefire for for all oem.props
MOB30N OTA
Micromax Canvas A1 [captured by joseph godslave]
https://android.googleapis.com/pack.../49c9f097cea6b12b3713eb3ff36d4821fcdfda02.zip
Symphony Roar A50 [captured by Joseph godslave]
https://android.googleapis.com/pack.../dd9fe3ff8a831b74b1c70d151b40daaaba9e4c62.zip
Evercoss_OneX_a65 [captured by Joseph godslave]
https://android.googleapis.com/pack.../b28bd1ba2077c3edba819fa5c9612ee4134d2811.zip
Nexian Journey One [captured by Joseph godslave]
https://android.googleapis.com/pack.../d6202af523a573c54691db82535ae8d70e8e8be9.zip
Spice dream Uno [captured by Joseph godslave]
https://android.googleapis.com/pack.../a339e7bd59b04add94c28ee5ea03e7232b38010f.zip
Mito Impact A10 [captured by Joseph godslave]
https://android.googleapis.com/pack.../07500b087c7a2d7b0ecaa0fd42b5cc531dca0966.zip
Karbonn Sparkle V [captured by me]
https://android.googleapis.com/pack.../cfb1b3b03153377384991abe5fdcd5c83a409eaa.zip
MyPhone_UNO [captured by Joseph godslave]
https://android.googleapis.com/pack.../7eea12a87b6453c0f3d4fb64aa582b2ad1e38c19.zip
Cherry Mobile One [captured by me]
https://android.googleapis.com/pack.../5193b3951f8d6ee32718a997519d2ffc266c4bad.zip
Mmx a1 AQ4502 [captured by me]
https://android.googleapis.com/pack.../e31128ae6f7107d0896f7376d750be07ae339718.zip
QMobile_a1 [captured by me]
https://android.googleapis.com/pack.../41f2de927ef5cd228c85f6f72566e0fb674200b8.zip
---------------------------------------------------------------------------------------------------------------------------------------------------
Full Stock MOB30N_sprout4_Rom ~~ https://www.androidfilehost.com/?fid=24572369242686135
Full Stock MOB30N_sprout8_Rom ~~ https://www.androidfilehost.com/?fid=24572369242686134
---------------------------------------------------------------------------------------------------------------------------------------------------
Sprout_4_Stock_MOB30N_BOOT.zip ~~ https://www.androidfilehost.com/?fid=24562946973631966
Sprout_8_Stock_MOB30N_BOOT.zip ~~ https://www.androidfilehost.com/?fid=24572369242686136
---------------------------------------------------------------------------------------------------------------------------------------------------
Sprout_4_MOB30N_stock_recovery ~~ https://www.androidfilehost.com/?fid=24572369242686138
Sprout_8_MOB30N_stock_recovery ~~ https://www.androidfilehost.com/?fid=24572369242686137
---------------------------------------------------------------------------------------------------------------------------------------------------
Steps for installation post #2
---------------------------------------------------------------------------------------------------------------------------------------------------
Thanks to Google, 1cefire , Joseph Godslave.
Catch y'll Next month!
How can i install this ota via stock recovery? [for those who on full stock, no root]
Just download appropriate OTA zip according your device, goto stock recovery, choose install update from SD card, choose zip, wait until it finish.....
After installation hit reboot system now.
How can i boot into stock recovery?
Follow below steps to boot into stock recovery : - Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery Code: Installation Instructions : - Download the appropriate OTA for your device - Place the OTA zip to your sdcard - Reboot to stock/custom recovery - Make a backup (just in case) - Perform a Factory reset.. Wipe data, dalvik, cache and system (recommended) - Locate the file and install - Reboot... It may take about 10-15 minutes so be patient Code: Follow below steps to boot into stock recovery : - Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery
My phone is rooted, how can I install this OTA?
Just install this recovery Here
Next, download appropriate OTA zip, reboot recovery > Choose advanced >choose ota installer > choose install zip> locate downloaded ota Zip >swipe to confirm flash >wait, let it install Voila! After successful installation hit reboot!
I had modified my system, such as build.prop and other sound mods, will it affect / broke ota installation?
Yep. It'll will broke the installation process, since you've modified the build prop and system, it'll surely give you error, so I'm requesting you to please roll back to stock build prop from here
https://goo.gl/0b782s and Uninstall if you've any sound mods installed, then attempt the installation, it's gonna update successfully!
Note=This method works with systemless as well as system mode root, you can flash this ota over custom kernel too.
I've xposed and Layers theme installed, how can I successfully install this OTA?
FYI, just Uninstall xposed framework & layers theme, then apply OTA, it's gonna install successfully!
How can i re-root my devices, after installation of ota zip?
Yes, just reboot after installation of Official ota, after a successful boot, again boot back into that twrp recovery, simply flash custom boot image [custom kernel] followed by Super su 2.50 zip, wipe dalvik/Art [IF YOU wish] reboot. Done!
Note>>Flash this MOB30N OTA zip Over MOB30G only!
Huge thanks to 1cefire for the TWRP!
Huge thanks to Joseph godslave for the OTA's!
And of course Me xD
Cheers!!
thanks for sharing!
Waiting for universal OTA. Thank you for posting the links.
naturist said:
Waiting for universal OTA. Thank you for posting the links.
Click to expand...
Click to collapse
Yo, no need to wait for universal OTAS!
Just download any Sprout_4 ota zip if you're using a Sprout_4, or download sprout8 ota if you're using sprout8, then check my 2nd post, download that twrp, go to ota installer, choose install zip, locate zip wait let it install, after that reboot!
Added links for Full stock Roms.
Added links for Stock MOB30N boot image.
Added links for Stock MOB30N Recovery.
Deleted!
sachin n said:
Yo, no need to wait for universal OTAS!
Just download any Sprout_4 ota zip if you're using a Sprout_4, or download sprout8 ota if you're using sprout8, then checked 2nd post, download they twrp, go to ota installer, choose install zip, locate zip wait let UT install, after they reboot!
Click to expand...
Click to collapse
I'm not sure if the stock ota can be flashed as I have modified the stock rom and removed couple of stock apps. I think it will give error 7 while flashing with twrp. I'll try now to confirm. Downloading the ota.
Edit: It worked. It seems the new recovery patch the OTA for easy installation. Thank you again.
naturist said:
I'm not sure if the stock ota can be flashed as I have modified the stock rom and removed couple of stock apps. I think it will give error 7 while flashing with twrp. I'll try now to confirm. Downloading the ota.
Edit: It worked. It seems the new recovery patch the OTA for easy installation. Thank you again.
Click to expand...
Click to collapse
Yes, you've to try with New recovery which can bypass Error 7 while flashing June Security patch Aka MOB30N, I've edited my #2 where you could find link for That twrp by 1cefire!
Nice, it worked with even TWRP_3.0.1-x_sprout, but error 7 found due to Google added assert command Within updater-script, so he made that twrp in order to fix that error 7.
Infact just reboot your device even after error 7, it'll still get updated with latest patch since the patching progress is already done.
unable to update
The twrp ota installer says successfully updated and the phone boots up properly.
But when i check in about phone it still shows:
Android security patch level : 1 May 2016
Build no : MOB3OG
flashed aq4502 ota zip from the link above.
I had already uninstalled xposed and layers.
edit1: after trying again i get the following message..
mount: failed to mount /dev/block/platform/mtk-msdc.0/by-name/system at /system: Device or resource busy
script succeeded : result was [/system]
edit2: In mounts, I mounted system partition and ticked read only.
Now i have successfully updated to june ota.
Thanks
abhijitkadam03 said:
The twrp ota installer says successfully updated and the phone boots up properly.
But when i check in about phone it still shows:
Android security patch level : 1 May 2016
Build no : MOB3OG
flashed aq4502 ota zip from the link above.
I had already uninstalled xposed and layers.
edit: after trying again i get the following message..
mount: failed to mount /dev/block/platform/mtk-msdc.0/by-name/system at /system: Device or resource busy
script succeeded : result was [/system]
Click to expand...
Click to collapse
Did you modified your system? Or build prop?
sachin n said:
Did you modified your system? Or build prop?
Click to expand...
Click to collapse
I had modified build.prop.
Then changed it again to stock one, was still getting mount error.
Anyways now i have successfully updated
Thanks a lot
abhijitkadam03 said:
I had modified build.prop.
Then changed it again to stock one, was still getting mount error.
Anyways now i have successfully updated
Thanks a lot
Click to expand...
Click to collapse
Yeah, that's the point Bruh!
Oops, I forgot to add that on my FAQ, thanks for reminding me
Wow, btw how did you updated?
Flashed full stock rom? Or what?
sachin n said:
Yeah, that's the point Bruh!
Oops, I forgot to add that on my FAQ, thanks for reminding me
Wow, btw how did you updated?
Flashed full stock rom? Or what?
Click to expand...
Click to collapse
Nope,
I knew what i had changed in build.prop (I had changed android version to 7.0 from 6.0.1, as i was using n-ify xposed module )
anyways thank you and also to icefire:good::good::good:
abhijitkadam03 said:
Nope,
I knew what i had changed in build.prop (I had changed android version to 7.0 from 6.0.1, as i was using n-ify xposed module )
anyways thank you and also to icefire:good::good::good:
Click to expand...
Click to collapse
You're welcome dude!
sachin n said:
Yes, you've to try with New recovery which can bypass Error 7 while flashing June Security patch Aka MOB30N, I've edited my #2 where you could find link for That twrp by 1cefire!
Nice, it worked with even TWRP_3.0.1-x_sprout, but error 7 found due to Google added assert command Within updater-script, so he made that twrp in order to fix that error 7.
Infact just reboot your device even after error 7, it'll still get updated with latest patch since the patching progress is already done.
Click to expand...
Click to collapse
Nice to learn new ways to flash otas. I keep the device with minimum Google apps, removed almost every stock app. So that's why I used to flash universal otas so to avoid the error 7. I was not aware that icefire updated twrp for otas script. It's been a long time to see him online. Hope he is well.
I also lost interest in roms and stuff and moved to iPhone. This is just a backup ph to stay updated with what's going on with Google OS. See you next month! Thanks again for your help. I really appreciate it.
naturist said:
Nice to learn new ways to flash otas. I keep the device with minimum Google apps, removed almost every stock app. So that's why I used to flash universal otas so to avoid the error 7. I was not aware that icefire updated twrp for otas script. It's been a long time to see him online. Hope he is well.
I also lost interest in roms and stuff and moved to iPhone. This is just a backup ph to stay updated with what's going on with Google OS. See you next month! Thanks again for your help. I really appreciate it.
Click to expand...
Click to collapse
Whoa! Moved to iPhone huh?
Since he retired from making universal ota zip, he decided make a twrp with ota installation support where official ota can be installed without stress!
Yeah, he's well atm, he's busy in his works, though he won't give up sprout :3
Yah, catch ya next month!
plz help for error7 in nonrooted spice dream uno
sachin n said:
Whoa! Moved to iPhone huh?
Since he retired from making universal ota zip, he decided make a twrp with ota installation support where official ota can be installed without stress!
Yeah, he's well atm, he's busy in his works, though he won't give up sprout :3
Yah, catch ya next month!
Click to expand...
Click to collapse
Hi everyone.. I hv got june security update but im facing error 7 while installing. I hv never rooted nor evn tried to root my phone..till last month everything was going proper i was getting all updates properly..plz solve my error 7.. I dont know wat to do i hv asked other dey all saying to flash the phone to lolipop..i dont want to flash it ..any help would b appreciated..
Pushpesh09 said:
Hi everyone.. I hv got june security update but im facing error 7 while installing. I hv never rooted nor evn tried to root my phone..till last month everything was going proper i was getting all updates properly..plz solve my error 7.. I dont know wat to do i hv asked other dey all saying to flash the phone to lolipop..i dont want to flash it ..any help would b appreciated..
Click to expand...
Click to collapse
Just perform a factory reset then try installing ota, if you problem still exists, then just rpot your phone and flash Universal zip.. It'll be fine.
sachin n said:
Just perform a factory reset then try installing ota, if you problem still exists, then just rpot your phone and flash Universal zip.. It'll be fine.
Click to expand...
Click to collapse
I hv factory reseted many tyms but still same problem.. Can u tell me step by step what can i do to install dat ota.. How to root and flash ..and will i get den official updates in future by doing that?
Now only u r my hope sachin.. So help me out..im learning android so dont know much about rooting and flashing..
These are the official MOB30W Over The Air Link, Captured via MOB30Q Using various Oem.props collected from all A1 devices.
Huge thanks to @ 1cefire for the all the Oem.prop collection.
MMX A1 [Sprout4] - - MOB30W From MOB30Q
Evercoss A65 [Sprout8] - - MOB30W From MOB30Q
Mito A10 [Sprout8]- - MOB30W From MOB30Q
Nexian Journey one [Sprout8] MOB30W From MOB30Q
Symphony Roar [Sprout4]-- MOB30W Form MOB30Q
Karbonn Sparkle v [Sprout4] - - MOB30W From MOB30Q
Mmx a1 [Aq4502] [Sprout8] - - MOB30W From MOB30Q
Myphone Uno [Sprout4] - - MOB30W From MOB30Q
Cherry Mobile one [Sprout8] - - MOB30W From MOB30Q
Spice dream uno [Sprout4] - - MOB30W From MOB30Q
Qmobile A1 [Sprout8] - - MOB30W From MOB30Q
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Full Stock MOB30W Rom == SPROUT4 || SPROUT8
Stock MOB30W Boot == SPROUT4 || SPROUT8
Stock recovery MOB30W == SPROUT4 || SPROUT8
Stock build.prop MOB30W == SPROUT4 || SPROUT8
Credits to JOSEPH GODSLAVE FOR THOSE FLASHABLE ZIPS
*. Installation and Instructions goes to #2
OTA Grabbers
*. Mmx a1 by Vishnu manjeri
*. Nexian, Mito, A65& Roar ota by Joseph Godslave
*. Mmx a1 aq4502, Cm one, MyPhone uno, spice, karbonn & QMobile a1 by Me
Huge thanks to @1cefire For his AWESOME TWRP Recovery...
Flash at your Own Risk
Installation >
How can i install this ota via stock recovery? [for those who on full stock, no root]
Just download appropriate OTA zip according your device, goto stock recovery, choose install update from SD card, choose zip, wait until it finish.....
After installation hit reboot system now.
How can i boot into stock recovery?
Follow below steps to boot into stock recovery : - Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery Code: Installation Instructions : - Download the appropriate OTA for your device - Place the OTA zip to your sdcard - Reboot to stock/custom recovery - Make a backup (just in case) - Perform a Factory reset.. Wipe data, dalvik, cache and system (recommended) - Locate the file and install - Reboot... It may take about 10-15 minutes so be patient Code: Follow below steps to boot into stock recovery : - Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery
My phone is rooted, how can I install this OTA?
Just install this recovery Here
Next, download appropriate OTA zip, reboot recovery > Choose advanced >choose ota installer > choose install zip> locate downloaded ota Zip >swipe to confirm flash >wait, let it install Voila! After successful installation hit reboot!
I had modified my system, such as build.prop and other sound mods, will it affect / broke ota installation?
Yep. It'll will broke the installation process, since you've modified the build prop and system, it'll surely give you error, so I'm requesting you to please roll back to stock build prop from here Sprout4 / Sprout8 [These build.props are flashable zips now, so all you need to do is just flash them and then try installing ota it's gonna install without errors. And Uninstall if you've any sound mods installed, then attempt the installation, it's gonna update successfully!
Note=This method works with systemless as well as system mode root, you can flash this ota over custom kernel too.
I've xposed and Layers theme installed, how can I successfully install this OTA?
FYI, just Uninstall xposed framework & layers theme, then apply OTA, it's gonna install successfully!
How can i re-root my devices, after installation of ota zip?
Yes, just reboot after installation of Official ota, after a successful boot, again boot back into that twrp recovery, simply flash custom boot image [custom kernel] followed by Super su 2.50 zip, wipe dalvik/Art [IF YOU wish] reboot. Done!
Yo, I'm using Sprout4 Rom on my Sprout8, which ota should I flash?
Nothing to worry!
Just download Sprout4 ota and flash it.
Compatibility ?
Any Sprout4 OTA over Sprout4
Any sprout8 OTA over Sprout8
Yay! There are links for full stock Roms, how can I flash them?
Yep, those links / zips are full stock Roms, if you're running on any build or running on any custom rom & wanna revert back to full stock with July security patch, then just download those zips, reboot recovery, perform a full wipe [Twrp> wipe > advanced > wipe everything except Micro_SD]
Then install that full stock rom zip, hit reboot key after installation!
Note>>Flash this MOB30W OTA zip Over MOB30Q only!
Thanks for the builds. It was a long journey for me to enjoy my Android one with regular updates. I sold it few days back and I'll surely miss you guys including 1cefire. See you around!
naturist said:
Thanks for the builds. It was a long journey for me to enjoy my Android one with regular updates. I sold it few days back and I'll surely miss you guys including 1cefire. See you around!
Click to expand...
Click to collapse
Deym!
Anyhow, nice to see ya.
Please provide full Roms asap. ?
DeepSahota said:
Please provide full Roms asap.
Click to expand...
Click to collapse
Dude, Sprout4 - - https://www.androidfilehost.com/?fid=24591000424951882
Sprout8 - - https://www.androidfilehost.com/?fid=24591000424951881
Credits to Joseph Godslave!
Stock Boot Links
Waiting for them.
supra_dos said:
Waiting for them.
Click to expand...
Click to collapse
One second bruh!
Edit - - Stock Boot MOB30W Sprout4
Stock Boot MOB30W Sprout8
Credits to Joseph Godslave!
gotcha
Thanks A lot....!
Tried flashing , Full Stock MOB30W Rom == SPROUT8 . it give me signature verification failed. HOw to proceed in that case?
droidbot678 said:
Tried flashing , Full Stock MOB30W Rom == SPROUT8 . it give me signature verification failed. HOw to proceed in that case?
Click to expand...
Click to collapse
Maga, did you tried flashing that zip via stock recovery or custom recovery!
If you tried flashing it via stock then you might get that error!
In case of you're tryin' flash that zip via TWRP, then please clean wipe your device and make sure your downloaded file is not corrupted!
Hello Seniors....
I want to flash the stock rom with august security patch,which is mentioned here.......
I have to wipe cache,dalvik,system,data??????
Or i should wipe internal storage too?????
Please help....i am really confused.......
rabsarkar said:
Hello Seniors....
I want to flash the stock rom with august security patch,which is mentioned here.......
I have to wipe cache,dalvik,system,data??????
Or i should wipe internal storage too?????
Please help....i am really confused.......
Click to expand...
Click to collapse
Well if you have custom rom before then u need to wipe data, system, dalvik and cache and if you are on stock then just flash the rom and wipe dalvik and cache only.
rabsarkar said:
Hello Seniors....
I want to flash the stock rom with august security patch,which is mentioned here.......
I have to wipe cache,dalvik,system,data??????
Or i should wipe internal storage too?????
Please help....i am really confused.......
Click to expand...
Click to collapse
Yes, just download Full stock rom and perform a full wipe by wiping system, internal, cache art and install that full stock rom zip, reboot.
Thnku Seniors......
Btw in my case,i am in stock rom with june security patch......
I modified the build.prop....changed some system apps.......
To get security updates,i again reverted back the stock build.prop......
Yet when i m flashing the security update of July,it is showing error 7....i fully unrooted the set
These are the problems with various recoveries
1)-Stock recovery-problem with system app
2)-Twrp OTA Installer-you have modified build.prop
3)-Twrp Official latest-error 7(failed to update)
.
.
.So i want to flash stock rom of august security patch....
What to wipe?????
Plzz solve my problm and let me out of this confusion????????????
rabsarkar said:
Thnku Seniors......
Btw in my case,i am in stock rom with june security patch......
I modified the build.prop....changed some system apps.......
To get security updates,i again reverted back the stock build.prop......
Yet when i m flashing the security update of July,it is showing error 7....i fully unrooted the set
These are the problems with various recoveries
1)-Stock recovery-problem with system app
2)-Twrp OTA Installer-you have modified build.prop
3)-Twrp Official latest-error 7(failed to update)
.
.
.So i want to flash stock rom of august security patch....
What to wipe?????
Plzz solve my problm and let me out of this confusion????????????
Click to expand...
Click to collapse
Yo my man, just do this if you wanna fall back to Google stock Rom!
1. Download full stock rom [ Look OP for link]
2. Reboot into recovery [Twrp / philz]
3. If you're using twrp then, go to wipe - > Advanced wipe >Choose all except SD card> swipe to wipe. In case if you're running philz, choose *Clean to install new rom, then flash zip.
4. Once the wipe done, now go back, and choose install zip > choose the stock rom MOB30W Zip where you keep on your SD, then swipe to install > wait few minutes, after completion of installing zip, tap reboot!
Voila done! :3 Now you're on full stock MOB30W with August security patch.
It's time for September patch, where it is bro?
iVirenSakariya said:
It's time for September patch, where it is bro?
Click to expand...
Click to collapse
Wait bro....u will get it within 4-5 days
iVirenSakariya said:
It's time for September patch, where it is bro?
Click to expand...
Click to collapse
Wait.