OnePlus 3 Orzly Cases Review - Fusion Bumper & Grip Pro Cases! - OnePlus 3 Accessories

Hello Everyone! So Orzly, a case company, recently sent out two of their OnePlus 3 Cases to me for review. I have been using these cases from the past couple of days and I have finally compiled my video review for the same. The Two cases that were sent to me are-
1. Orzly Fusion Bumper Case
- This is a transparent hard plastic case that has a rubber lining along the sides for impact protection
- Works well. Since it is transparent, you can show off your phone with it.
- Doesn't add much bulk. Feels sturdy to use
- The Plastic material is a fingerprint magnet and after prolonged usage, the transparent plastic tends to turn a little yellowish at some places
- Notification slider is a bit difficult to use.
- Case even covers the front of the phone, so if you keep your phone face down, your screen will not be damaged
-Good impact protection. Did drop it quite a few times with this case, the phone was very well protected.
Grip Pro Case
- As the name suggests, Provides loads of grip and protection to the phone.
- It is a 2 part case. The outer shell has a grippy texture.
- Bulky as compared to some other cases but offers very good protection.
- Notification slider is easier to use on this case compared to the fusion case
- Best for active users who have a rough usage.
Overall, these two cases are great for the OnePlus 3. I have made an indepth video review of them and it would be great if you can check the video out. Please ask your questions, queries in this thread. Thanks
Here is the video:-

Related

Real Life RhinoShield CrashGuard Bumper Review

Hi all, I would like to take this opportunity and give my honest and practical review about this case & screen protectors.. Pictures coming up soon.
I have had this case for about one week now and its been great in terms of protections. I generally don't have butter fingers. Most of the times, i have my phone on my office table. As far as the protection goes, this case does an excellent job protecting volume rockers, power button, alert slider and charging port. It's shock absorbing patterns is great for those corner drops. This has to be one of the best bumper case I have used on smart phones. Previously, i have been using the Spigen Rugged Armour as my daily driver. Its a very beautiful soft tpu case but doesn't match the protection anywhere close to what RhinoShield offers. This case is for someone who wants great protection in very minimalist way. It's definitely worth giving it a try.
I am also using the Rhino Tempered Screen Guard. I have used few other brands before this, I got to say this is one of the best out there because of the following reasons. Scratch reistant, slim profile, anti-fingerprint, not edge to edge screen protector which makes it easy for me to switch cases without worrying.
Pros
-great protection
-it covers the camera bump
-doesn't rock when its laid on table
-alert slider works fine
-excellent cutout for the usb Type C charger and speakers
Cons
- It's very snug that makes it difficult to remove/putting on the case for the first few times
- very stiff volume rockers
- side bumper could use additional textures styling to improve the grip since this phone is >5 inch.
-will not be able to use the full size tempered glass screen protectors
Here is a video from Phonebuff who did a drop test while using this case. It's a killer case. It sets bar higher for other phone case makers.
https://www.youtube.com/watch?v=GhmoxjptZcM

[HOTBUX] Carbon Fiber case for OP3!

Hi all.
I know you all want a best case at cheap rate.
Alright, I'm here for you bringing the awesome case at cheapest rate ever.
OnePlus 3 / OnePlus 3T Case Premium Ultra Slim Lightweight Carbon Fiber Design Flexible Soft TPU Shock Absorption Rubber Protective Case Cover for OnePlus 3 / OnePlus 3T ( BLACK )
This one is made by HOTBUX and is Official!
I've been using this case from 3 months and it's still awesome and as new as it was on the first day.
Let's come up to the price and it is Just 199 INR
Description:-
This Case is High strength TPU Case With Anti Shock Corners for One Plus 3 / 3T. This Cover has been designed after understanding the needs of customers who wants to provide great protection to their phone and make their phone stand out in the crowd by enhancing its looks. It is made by high quality eco friendly materials and has unique textures on back and perfectly fits to your One Plus Phone.
FEATURES:-
Simple and Slim Case: This case provides 360 degree protection all around to your valuable phone while maintaining its slim profile. Its unique Air Cushion Technology and shock proof corners make your phone impact resistant from all sides on a drop or bump
Raised Lips for Camera and Screen: This high strength soft TPU Case gives your phone an all round protection. Its intelligently designed upper lips extend over the sides of the phone to give an extra safety to your screen and camera on a fall and when kept down on a flat surface
100 % Perfect Fit and Lightweight: This Case is made in mould designed especially for One Plus 3 / 3T model so it takes care for smallest details of your phone such as buttons, protruding camera, speakers and other controls
Unique Brushed Silk & Carbon Fibre Texture: This high strength soft TPU case has Unique Smooth Silk Brushed Texture and carbon fibre with glossy accents on the back side to enhance the looks of your phone and make your phone stand out
Flexible, High Quality Material: Made up of high grade environment TPU rubberised materials that are non toxic & odour free to protect environment and also does not affect your health unlike other Cheap cases. Also, it is highly flexible and made up of tough material which is random deformation & tear free
Features & details:-
This Case is Compatible with OnePlus 3 & OnePlus 3T and is made of High Quality TPU Rubber.
This Case is Ultra Lightweight and has been designed specifically for the OnePlus 3 / OnePlus 3T smartphones. Ultra slim lightweight design offers soft comfortable touch feel while greatly protects your phone.
Perfect fit of this case ensures protection of all edges of Phone and full access to all of the phone's buttons, ports, speakers, camera and controls.
Nice looking Carbon Fiber Textures for Good Grip to avoid slip
This Case is resistant, flexible , durable and effectively prevents your phone from accidental shocks, bumps or drops during daily use.
Link:good:
https://www.amazon.in/dp/B06XSQYFGV/ref=cm_sw_r_wa_apa_i_mYuJzbMK4GC42
thats knock-off version of spigen
http://www.amazon.in/Spigen-K03CS20...d=1502438750&sr=1-1&keywords=spigen+oneplus+3
Unless you have to pay 899
avenger49 said:
Unless you have to pay 899
Click to expand...
Click to collapse
You get what you pay for.
i mean come on... you need your phone, its your everyday tool... and yet you entrusted a cheap case to protect it?
danxtian said:
i mean come on... you need your phone, its your everyday tool... and yet you entrusted a cheap case to protect it?
Click to expand...
Click to collapse
I know it's cheap but quality is damn tough.
danxtian said:
i mean come on... you need your phone, its your everyday tool... and yet you entrusted a cheap case to protect it?
Click to expand...
Click to collapse
It survived my phone 4 to 5 times
Bought it...Waiting now ..I have spigen case..will compare and tell here is it worth 1/4th the price of original(spigen can be bought close to 800 INR)???
I thought to myself that the case looks familiar, and my thought is correct. It's the case I've had for almost as long as I can remember, and while I wouldn't say it withstand a comparative check against a Spigen, it's still a dang nice case. I bought mine off a Chinese website for $9 and I can say it's serviceable.
I've installed it for about four months or so, if memory serves me correct and it has protected the device from countless of falls to wooden floors (don't want to test on a concrete because that'd be a bad idea).
Photos attached, sorry for the horrible lighting of the photos.
I'd rather break my phone than wear a case like that.
I wear thin plastic transparrent (nillkin nature) cases or the original karbon one.
I keep my phone usable and stylish, wearing those big spigin-like cases absolutely destroys the phone's desing any my usability.
I have 1+3 for about 9 months and nothing happened.
but every day i enjoy the thinness and looks of my phone.
carbon fiber "design" isn't carbon fiber
Literal copy and paste of the Spigen, which I'm using as we speak. Its durable I won't doubt that but you need to change the design or something.

What are the best Samsung Galaxy Note 8 cases available?

I’ve just received a load of Samsung Galaxy Note 8 cases and I figured that I would do a roundup of my favourites considering the Note 8 release is just around the corner! Please add any cases to this post that you also like the look of or have received in advance of the Note 8 release! All of these photos were taken with the OnePlus 5 which I thought did a pretty good job - that might be for another post though
1. Olixar Sentinel - This is a really stylish looking case and blends in perfectly with the phone so that you can barely tell it’s there. It is easy to grip and feels really nice to hold thanks to the brushed metal finish. It’s not quite the level of protection that you get from some armoured cases but I’m certain that it would do the job if you dropped the phone. Best of all though…. You get a free tempered glass screen protector with it that fits the phone with the case on. That’s all bases covered!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Ringke Air Prism - I thought I’d add something a bit different for number 2 and maybe a little more fashionable (I know absolutely nothing about fashion!). This case is all about the looks with it’s glittery, kaleidoscope style, it really catches your eye! It fits the phone snugly and otherwise feels like any other premium TPU case - so soft to the touch, light and durable.
3. Olixar X-Tome Book Case - I know a lot of people enjoy leather wallet cases so I thought that I’d add this one as it has an interesting look to it… It essentially looks like a book if you couldn’t already tell, which I thought was pretty cool. This case feels premium with its leather finish and has card pockets on the inside and also opens out to let you stand the phone landscape and watch movies. So if you have an empty space on your bookshelf… I guess this could fill it… Pretty random thing to have I guess. Anyway this case does the job when it comes to dropping your phone and as it’s a magnetic wallet phone it protects your screen nicely.
4. Ringke Slim Case - I loved this one because it’s nice and easy to take in and out of your pocket, it’s very solid so you feel safe even when dropping your phone and its has pockets to hold your cards - although with android pay I suppose that isn’t entirely necessary anymore… Still a very sleek looking case! (FYI - you have to buy the card holding segment separetly!)
I know I’ve only got two brands on this list but never fear! If I get more cases (I’m hoping for Samsung and Spigen cases) I will add them to this list if I think they’re up to much.
zedexdriver98 said:
I’ve just received a load of Samsung Galaxy Note 8 cases and I figured that I would do a roundup of my favourites considering the Note 8 release is just around the corner! Please add any cases to this post that you also like the look of or have received in advance of the Note 8 release! All of these photos were taken with the OnePlus 5 which I thought did a pretty good job - that might be for another post though
1. Olixar Sentinel - This is a really stylish looking case and blends in perfectly with the phone so that you can barely tell it’s there. It is easy to grip and feels really nice to hold thanks to the brushed metal finish. It’s not quite the level of protection that you get from some armoured cases but I’m certain that it would do the job if you dropped the phone. Best of all though…. You get a free tempered glass screen protector with it that fits the phone with the case on. That’s all bases covered!
2. Ringke Air Prism - I thought I’d add something a bit different for number 2 and maybe a little more fashionable (I know absolutely nothing about fashion!). This case is all about the looks with it’s glittery, kaleidoscope style, it really catches your eye! It fits the phone snugly and otherwise feels like any other premium TPU case - so soft to the touch, light and durable.
3. Olixar X-Tome Book Case - I know a lot of people enjoy leather wallet cases so I thought that I’d add this one as it has an interesting look to it… It essentially looks like a book if you couldn’t already tell, which I thought was pretty cool. This case feels premium with its leather finish and has card pockets on the inside and also opens out to let you stand the phone landscape and watch movies. So if you have an empty space on your bookshelf… I guess this could fill it… Pretty random thing to have I guess. Anyway this case does the job when it comes to dropping your phone and as it’s a magnetic wallet phone it protects your screen nicely.
4. Ringke Slim Case - I loved this one because it’s nice and easy to take in and out of your pocket, it’s very solid so you feel safe even when dropping your phone and its has pockets to hold your cards - although with android pay I suppose that isn’t entirely necessary anymore… Still a very sleek looking case! (FYI - you have to buy the card holding segment separetly!)
I know I’ve only got two brands on this list but never fear! If I get more cases (I’m hoping for Samsung and Spigen cases) I will add them to this list if I think they’re up to much.
Click to expand...
Click to collapse
This are really awesome cases.
A few days back, I was looking for a case for my new Samsung Galaxy Note 8. But with plenty of brands available in the market, I got a bit confused on choosing the perfect one for my device. Then I found my solution on amazon. These folks are having an amazing collection of some of the best Galaxy Note 8 cases.
I needed something compatible with the Dome Glass. I went with the Tech21 EVO tactical. So far it's great case.
Double post...
Mike02z said:
I needed something compatible with the Dome Glass. I went with the Tech21 EVO tactical. So far it's great case.
Click to expand...
Click to collapse
Would you mind sharing a side view shot of the case with the Note 8 in it? I'm wondering about the thickness of the lip. I'm still not sure what rugged case I'll eventually go with. I'm torn between the Tech21 EVO tactical, the UAG Monarch, the Samsung Rugged and the Otterbox Commuter. Definitely would appreciate more feedback on the tactical if you are so inclined to share.
Look at patchworks cases. Slim enough with good protection well made and great price
Sent from my SM-G935W8 using Tapatalk
For me, I have always used Piel Frama cases with my previous devices, although they have yet to release cases for Note8, these are the best cases available for smartphone devices in my opinion, though expensive.
Sent from my SM-N950F using Tapatalk
I have the Alcantara case and the UAG Monarch case coming, just waiting on Amazon. I will use the spigen crystal clear case cause it was only one available when I order. That was 2 weeks ago.
Sent from my S7 Edge using XDA Labs
I personally love the Spigen Tough Armor cases the most. Had them on my Note 4, short-lived Note 7 and now my Note 8.
I've been using UAG cases for as long as I can remember, I wouldn't even consider something else when there's a UAG available. Best quality, best protection, coolest looks by far.
After the sweet trade in deals, I figure everyone should be keeping their phones in good condition. I used to go naked, but now a case seems worth the minimal investment. Here are some from my S7Edge and Note 8...
(Quick edit: All these cases were compatible with every wireless charger I own, and none of those chargers were particularly high end.)
Spigen Thin Armor (S7Edge)
- Nice dual layer setup.
- Outer shell scuffed relatively easily, showing the white inner plastic.
- More slippery hard shell than I would have liked, though not terrible by any means. Problem made worse by the slight bow in case, so just the slippery, hard section makes contact with the surface.
- There was a decent lip.
- Not too bulky, but a good, dense feeling.
- Kick stand was a joke. Flimsy plastic that could easily pop off, failed to hold the phone up, and wore down after a couple months. Also detracts from the clean look by being a different color and sporting a massive branding label.
- Good button responsiveness.
- Good camera protection.
- - Overall: Good overall quality and great compromise between size and protection, but questionable longevity and middle of the road looks.
Generic clear soft flexible (TPU) cases (S7Edge, 3 different brands)
- They all discolor, though it is most noticeable along the edges, presumably because you're looking through more material in those areas.
- Fine for backup or limited use.
- Looked bad.
- Button areas would become deformed slightly and eventually not line up correctly (on all of them).
- Minimal protection, almost no lip.
- - Overall: Fine for backup or if you need something phone sized for a small project. Otherwise, very underwhelming.
Caseology Legion Series (Note 8)
- Very solid, 2 layer system with quality in line with the Spigen case above.
- Cut outs roomy, except for the headphone cutout, which might be a bit tight (will not fit right angled 3.5 mm plugs). SPen cut out is very well spaced. Speaker cut out is deep, so accidentally completely blocking the sound is almost impossible.
- Adds noticeable bulk, especially to the sides. Makes it look like a few mm of bezel around the screen.
- Generous lip, with raised edges on the back as well. The edges are from the softer part, to the phone doesn't slide when set down on a slightly angled surface.
- Good camera protection, but glossy material is hard to distinguish from the fingerprint sensor. Also, unlike some cases, which have an asymmetrical camera area that's supposed to help you feel the sensor, the camera area is symmetrical.
- Appearance is very clean, angled, and monolithic. No busy patterns and compliments the phone nicely. And tiny, tiny branding icon that doesn't diminish the looks.
- Buttons a little stiffer than other cases, which can be a good thing (yet to accidentally push any).
- Worthwhile mod: Drill or cut out a little of the headphone jack area.
- Possible 2nd mod: Patch the speaker area with Sugru and carve out a front facing sound notch, so that sound if reflected forward.
- - Overall: This case is more on the 'protection side' than the 'slim side' of the scale, but it still looks good. It's bulkier than the Spigen (based on the S7E version), but offers better protection, especially around the edges. I don't like the bulk it adds for everyday use, but it would be my go to for longer trips, like relaxing vacations. Probably NOT rugged enough for more adventurous hikes, but not too far off if you added front protection. Definitely provides peace of mind and won't look out of place in a more formal scene.
Ringke Fusion clear, black edge TPU (Note 8)
- A little more firm than the super cheap TPU cases I had on the S7E.
- For TPU, the more firm, the more slippery, definitely the case here. It's smooooooth (which also means fingerprints galore).
- The colored edge will diminish any yellowing, which I have noticed none of. I've had it out on a desk next to the window, so plenty of sun for the last 2.5 weeks.
- Cut out are all accurate and roomy.
- Surprisingly good top and bottom lips.
- Much thinner sides, feel like they may deform over time/with use.
- Just the addition of that black coloring on the edge makes it a night and day difference from the soft TPU cases I had on the S7E. Also, no branding.
- So thin that it actually looks like part of the phone.
- Possible mod: Might sandpaper the outside surface to add a frosted effect and some grip.
- - Overall: If you like the way the phone looks without a case, this is probably as close as you can get. But, the protection is pretty minimal. Fine for basic protection.
I have the Poetic Nubuck and YFWOOD real wood case coming in the next 2 weeks, so I'll update this soon..
xbkingx said:
Caseology Legion Series (Note 8)
- Very solid, 2 layer system with quality in line with the Spigen case above.
- Cut outs roomy, except for the headphone cutout, which might be a bit tight (will not fit right angled 3.5 mm plugs). SPen cut out is very well spaced. Speaker cut out is deep, so accidentally completely blocking the sound is almost impossible.
- Adds noticeable bulk, especially to the sides. Makes it look like a few mm of bezel around the screen.
- Generous lip, with raised edges on the back as well. The edges are from the softer part, to the phone doesn't slide when set down on a slightly angled surface.
- Good camera protection, but glossy material is hard to distinguish from the fingerprint sensor. Also, unlike some cases, which have an asymmetrical camera area that's supposed to help you feel the sensor, the camera area is symmetrical.
- Appearance is very clean, angled, and monolithic. No busy patterns and compliments the phone nicely. And tiny, tiny branding icon that doesn't diminish the looks.
- Buttons a little stiffer than other cases, which can be a good thing (yet to accidentally push any).
- Worthwhile mod: Drill or cut out a little of the headphone jack area.
- Possible 2nd mod: Patch the speaker area with Sugru and carve out a front facing sound notch, so that sound if reflected forward.
- - Overall: This case is more on the 'protection side' than the 'slim side' of the scale, but it still looks good. It's bulkier than the Spigen (based on the S7E version), but offers better protection, especially around the edges. I don't like the bulk it adds for everyday use, but it would be my go to for longer trips, like relaxing vacations. Probably NOT rugged enough for more adventurous hikes, but not too far off if you added front protection. Definitely provides peace of mind and won't look out of place in a more formal scene.
Click to expand...
Click to collapse
I appreciate the feedback on the Legion. I don't intend to use a tempered glass screen protector, and I was wondering whether you think the lip would protect against minor flat face down falls.
KBeckett said:
I appreciate the feedback on the Legion. I don't intend to use a tempered glass screen protector, and I was wondering whether you think the lip would protect against minor flat face down falls.
Click to expand...
Click to collapse
No problem. Glad I could help.
I think it would. The lip is right on the border of being attention-grabbing big, so any bigger and you should be looking at a case marketed primarily for ruggedness (military specced, 'rugged' in the name, etc.). It won't take a fall from the 5th floor of a building onto concrete, but a drop from the nightstand or a pocket should be no problem. Take a look for yourself: https://youtu.be/5TAOmprTsk0?t=8m2s
MINIMALIST - A case made for those who love minimal design
This is the thinnest case in the world https://mnmlcase.com/products/samsung-galaxy-note-8
MINIMALIST - A case made for those who love minimal design. No branding and unnecessary clutter.
UNREAL THIN - Do you know what 0.35mm looks like? I didn’t think so. It’s barely noticeable!
PERFECT CUTOUTS - The case fits your Galaxy Note 8 like a glove, exposed buttons and ports are perfectly cut giving you full easy access. The camera cutout has a raised bump to protect your camera on surfaces. The front of the case has a raised rim to protect your phone’s screen from scratching.
NO FINGERPRINTS - Covered in a fine, matte texture which feels terrific and, unlike glossy plastic Galaxy Note 8 cases, effectively repels fingerprints and dirt.
I looked for cases, and screen protectors for a long while, and I ended up getting a Zizo Bolt because it came with the case, and a screen protector on sale for $18 with free shipping. I haven't really seen a lot about the case, or screen protector, but I bit the bullet, and got it anyways. The biggest complaint everyone has with the car is the buttons are stiff. I agree, but you can still press them as long as you give it more strength and an under fed toddler. I can even do the power button double tap to get to the camera without issues. As for the screen protector, the installation was very simple, the glass is very responsive and smooth, and I can use the phone as if there is no screen protector. The only issue is it collects fingerprints like they're going out of style. However, I can wipe the screen a few times with little effort with my shirt, and no more fingerprints. I was wondering if anyone else has used the Zizo Bolt before, and how well you like(d) it. I do miss my UAG case, but I was trying to keep the cost as low as possible for the screen protector, and case. This was the best deal in my opinion.
xbkingx said:
No problem. Glad I could help.
I think it would. The lip is right on the border of being attention-grabbing big, so any bigger and you should be looking at a case marketed primarily for ruggedness (military specced, 'rugged' in the name, etc.). It won't take a fall from the 5th floor of a building onto concrete, but a drop from the nightstand or a pocket should be no problem. Take a look for yourself: https://youtu.be/5TAOmprTsk0?t=8m2s
Click to expand...
Click to collapse
That's great to hear.
Thanks so much for the feedback; it's greatly appreciated.
Personally, I love the Spigen Liquid Crystal cases - doesn't detract from the design of the phone, slim, pliable, protected my S7 for the last nearly-2 years, and now protecting my Note 8. Leaves plenty of space for ports and S-Pen, buttons protected but responsive, little lip to protect the screen from drops.
Following up on my last post, got the Poetic Nubuck and YFWOOD real wood cases.
Poetic Nuback (2 card pocket, Note 8)
- Very nice material quality. Top portion has a plush, fabric, alcantara feel. Bottom portion is a soft faux leather, but not that slippery cheap stuff. Internal surface is hard plastic with no cushioning pattern or soft materials.
- Room for 2-3 cards, maybe even a few bills.
- Uses a flat piece of cord/fabric string to remove cards: Inserting card pushes the string down into the pocket, pull the tab on the string to remove the cards. The down side to this is that there's no easy way to tuck the string in if you don't want to add any cards. The pocket is too tight to feed the string in and balling it up adds an annoying lump. This is usually handled with a piece of elastic attached from the inside bottom of the pocket to the string middle, but that is missing here.
- Can wireless charge with the pocket empty (not even going to try with cards in it, since that can't be good for the strips).
- Surprisingly thin, which is nice for a wallet case, but doesn't offer the best protection.
- Very minimal lip/raise-ivity. Placing the phone face down, it will rest on the case lip, but the smallest amount of pressure will cause contact with the tabletop. Will be useless for any drops.
- Buttons are slightly stiffer, and the volume button has been split in 2, instead of a single rocker design.
- Side edges add enough width to the phone to reduce accidental edge touches, but that also means, again, minimal protection.
- Camera area well protected and symmetrical.
- Overall: This case looks and feels nice and would be decent for night out. However, it offers very little protection - more than a skin or ultraslim case, but much less than any other case I've had (including the cheap $5 soft TPU throwaways). The cardholder is nice to have, but annoying to use. All that said, it's still a nice everyday driver case for people that don't usually use cases (don't drop their phones), want basic scratch protection, and something that's stylish without being gaudy.
- Who this is for: You don't like cases, but feel compelled to protect such an expensive device. You're not a klutz, so want something cheap, but unique and premium feeling.
YFWOOD real wood case (Note 8)
- I was looking forward to this case the most, and found it the most disappointing.
- There is a thin piece of dyed balsa wood or compressed wood splinters, that's recessed into a stiff plastic pattern. Or maybe there's a thin sheet wedged between two plastic surfaces. Can't tell. The point is that you won't actually feel wood, and if you did, you'd probably get splinters, judging by how rough it is.
- Feels like a low quality, hard and slippery plastic case.
- Minimal protection, slightly more lip than the Poetic (above), but looser fit, so a direct hit would probably cause the phone to pop out anyways.
- Symmetrical camera protection, good camera protection.
- Super stiff buttons, different texture around buttons, but the Bixby and volume buttons have a continuous texture (no change in texture between them), so you're never sure if you're about to hit the Bixby or volume down button.
-Overall: Just don't buy this case. I thought this would be the 'interesting case' for my phone and it turned out embarrassingly 'meh'. Slippery, no protection (except scratches), cheap feeling, and makes the phone more difficult to use.
- Who this is for: You were going to get a $7 case, but found $5 off coupon and thought you'd get all fancy.
8 probably overspent but I gave in and bought the otter box if I spend g 1000 dollars on a phone j want it protected from drops. I actually think it's a good case. I did ended up modified the case I cut the plugs off where the charging port and headphone jack is. Don't need a pressure put on the power plugs while charging don't want future problems with charging port

Spigen Rugged Armour vs Ringke Onyx Brushed Metal Case comparison

Heres my Spigen Rugged Armour vs Ringke Onyx Brushed Metal Case comparison reviews with side by side photos
Just a foreword I've only had Spigen cases for my OP3 and its saved me a least a few time I've dropped it either at the airport or the road - brown trouser time where u think the screen will be smashed/cracked. All times walked away with slight mark/scuffs to original OP screen protectors. Fancied something different for my OP5T so went for the Ringke as well.
Look and feel
As you can see both made of same material
The back of Ringke feels unique very sandstone type texture which provides excellent grip whereas the Spigen is very smooth rubber
However the Ringke case feels much thinner so not sure if offers same protection as Spigen
Cutouts and Front lip protection
Front lip protection to protect the screen - think the Spigen wins slight extra thickness to the the lip
Extra protection for the camera both same - few extra mm to protect the rear cameras
Again both have cutouts for all key ports - Ringke also has dust covers for USB-C port and headphone jack which is actually a good thing (fluff stopping charging situations) However a big negative - very hard to access the alert slider using the Ringke due to the top lip so Spigen wins
Both are compatible with the original OP screen protector with no lift off but I think this may be due to human error as I assume applied by hand at factory and I seen some when not fully lined up with screen /front camera etc.
Costs well the Ringke is the slightly cheaper and it came with a free lanyard both premiums products but for me the alert slider access is key issue for me I will keep both and swap due to how I feel. Any questions fire away
I used the Spigen rugged armour on my oneplus 2 and 3. I was thinking about getting it for my OP5T, but I got the sandstone case when I bought the phone and that is just absolutely fantastic... probably doesn't do much when it comes to protecting the phone.. but, it looks amazing.
Once I get tired of looking at this beautiful thing, I will probably end up buying the Rugged Armour
It would be nice to see a pic of the phone in the cases...

OnePlus 7T case roundup

Since I've bought a few different cases, I thought I'd do a roundup of them.
Nillkin Super Frosted Shield Matte:
Minimal case, but with a slight lip around the glass and camera bump protection. Full 360 degree coverage with tight cutouts and good buttons. A very tight, accurate fit; it won't bounce off if you drop it.
Covered with a bump pattern to make it grippy. Hard plastic that will likely crack on dropping.
For: people wanting to reduce the slipperiness of the phone, make the bump look less dumb, and protect from scratches and light drops.
Spigen Liquid Air:
Light by Spigen's chonky boi standards, this gives protection not far off their Rugged Armour series without the goofy carbon fibre accents. Looks good and fits great. Large protection lip around the screen and sufficient camera cover. Tasteful design. Not as grippy as you'd think, but better than just the phone.
For: serial phone-droppers who don't want to make their giant phone any more gigantic. A good compromise case.
Official "sandstone" bumper case:
More rugged than the Super Frosted Shield, but with openings for the rockers, buttons, and top and bottom.
Extremely grippy texture and a tight fit. Good screen lip protection and camera cover. Aesthetically a bit weird; a bit "HTC Desire era" with the big gaps all around. Tasteful OnePlus logo.
Colour and texture of an asteroid space station wall; really needs to have "REMEMBER THE CANT" spray painted on it.
For: official case fans who don't mind paying twice what it's worth (unless you find it on eBay). Daredevils. People who like to click the proper buttons.
All three are good, but if you spend the RRP on the official case, you should go get your face paint on and get to the circus, because you're a clown.
Good write-up ?. Though I tried a couple of cases - both military types and transparent types - I couldn't find any of them good. I still use the official transparent case that came with the phone. I couldn't find any better than this case.
For military types I hate them because of the thick bumper sides that eliminates the bezel-less nature of the phone. Yes the military types meant for that kinda protection but I don't like those cases. For the transparent ones none of them gives that extra bumper for the screen and back camera glass like the official Twitter m transparent case. All of them were sh*ts.
For my old Lenovo Z2 Plus, there were a vast variety of colored back covers with extra screen and back camera bumper protection. I had more than 20 cases in different types and colors. My MiA1 also has more than 10 different cases. Note that these weren't just cheap quality cases with some printed graphics, these were all in plain solid colors. I don't know why case manufacturers of 7T never make such kind of cases.
Two months ago I was planning to make a custom made plastic-printed case with the help of my friend, he has a 3d printer with him. I even made a 3d model of the phone and case in my PC. But due to the pandemic I had to stop the process. Not sure if I can do the further developments.
Sent from my OnePlus7T using XDA Labs
I’ve never understood why “military grade” is considered a selling point. Have these people never met someone who was in the military? Everything’s made by the lowest bidder!
I agree with the lack of case options. I don’t think the OnePlus 7T sold all that well or something, it’s disappointing.
I got my 7T used and it came with three official cases. I'll add to your list, if you don't mind.
Karbon Protective Case:
This case is just like the Sandstone in that the buttons, slider and top/bottom are exposed. The feel is interestingly rubbery, but a bit slippery. It is very thin and almost looks like a skin until you look closer. Not that it is that thin, but fits so well. It's so thin it adds nearly no weight. The OnePlus logo is far more pronounced than the Sandstone, and really pops being so silvery-white. It makes me wish the Sandstone had a silver/white logo, it's that good.
Sandstone Protective Case:
Basically everything you said. The grip is incredible and you will be hard-pressed to drop your phone unless you're being careless. An improvement over the 5T Sandstone as the texture is slightly better. My go-to case, really.
Red Silicone Bumper Case:
This thing is pure red. Wow, that red! It is noticeably more bulky than the Karbon and Sandstone. There is no lip for the camera bump because it's bulky enough to clear it. So the back is smooth all the way, no table wobble. The inside of the case is a nice suade. It actually is an awesome premium touch, and you feel good to know your phone is safe from even case scratches, lol. Covers all buttons, makes the slider a bit more difficult to reach (but not too much), and covers all the way around the top and bottom, leaving ample holes for the microphone, charging port and bottom speaker. There is an ample lip all the way around. The feel is similar to the Karbon but more grippy. Softer feeling. The logo is understated and just recessed in the silicone.
All of these cases feel very premium (to me) and the fit is so perfect I think they're worth the investment. Especially if they last as long as my Sandstone from the 5T I used since launch.
Update: I've been using the official Sandstone case as my daily driver for nearly four months now. I've had a bunch of drops from pocket height onto concrete without any damage to the phone, and the case texture hides the dings very well.
Would recommend again.

Categories

Resources