i turn on kindle fire hd 7 it goes to kindle fire logo
then goes to fastboot logo then black screen on pc it saids
USB DEVICE NOT RECOGNIED THE LAST USB DEVICE YOU CONNECTED
TO THIS COMPUTER MALFUNCTIONED AND WINDOWS DOES NOT RECOGNIZE IT
i can turn it on without a cable pluged up and it will go from kindle logo
to fastboot logo and black screen.i know the bootloader
is messed up so is ther a way to fix this? i put Ubuntu 12.04
on flash drive and firekit can boot to Ubuntu then downloaded soupkit
install the install.sh and all files diapere.so now
im stuck like this with fk it just sits at waiteing for omap44xx tryed the shorting trick but nothing
happens any help would be great thanks
xrebelhellx said:
i turn on kindle fire hd 7 it goes to kindle fire logo
then goes to fastboot logo then black screen on pc it saids
USB DEVICE NOT RECOGNIED THE LAST USB DEVICE YOU CONNECTED
TO THIS COMPUTER MALFUNCTIONED AND WINDOWS DOES NOT RECOGNIZE IT
i can turn it on without a cable pluged up and it will go from kindle logo
to fastboot logo and black screen.i know the bootloader
is messed up so is ther a way to fix this? i put Ubuntu 12.04
on flash drive and firekit can boot to Ubuntu then downloaded soupkit
install the install.sh and all files diapere.so now
im stuck like this with fk it just sits at waiteing for omap44xx tryed the shorting trick but nothing
happens any help would be great thanks
Click to expand...
Click to collapse
Fast boot logo?
Try changing/resetting USB ports, and connect only to a 2.0 port
Killa8 said:
Fast boot logo?
Try changing/resetting USB ports, and connect only to a 2.0 port
Click to expand...
Click to collapse
thanks killa 8 i will give it a try my next day off
Any luck?
Any luck with the fix for this KFHD7 "black brick"? I have the exact same problem.
Related
I have a pair of kindle fire hd 7 that are bricked, first one i can get into fastboot with a "factory cable" but the computer does not reconize the kindle.
the second seem to be hard bricked i get nothing out of it does not respond to charger or foctory cable. Any help would be Wonderful Thanks in Advance
Shunloc said:
I have a pair of kindle fire hd 7 that are bricked, first one i can get into fastboot with a "factory cable" but the computer does not reconize the kindle.
the second seem to be hard bricked i get nothing out of it does not respond to charger or foctory cable. Any help would be Wonderful Thanks in Advance
Click to expand...
Click to collapse
There's a hundred topics on this if you just use the search engine.
Thanks for that thought, i have looked, I do have the most up to date kindle usb drivers i can get but still can not get windows to reconize the kindle in fastboot, I just want to clairify that the issue with the hd7 that can "fast boot" is that i cant get my computer to reconize it
Plug it in with a normal cable once it's in fastboot, then try my drivers in my signature on the device in the device manager that should say something like tate-pvt or jem-pvt if it is a 8.9" model.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Shunloc said:
I have a pair of kindle fire hd 7 that are bricked, first one i can get into fastboot with a "factory cable" but the computer does not reconize the kindle.
the second seem to be hard bricked i get nothing out of it does not respond to charger or foctory cable. Any help would be Wonderful Thanks in Advance
Click to expand...
Click to collapse
Ok have done some reading and it is possable that it doesn't go into fastboot all the way. All it does is stop on the fastboot logo haven't seen a red triangle at all
Shunloc said:
Ok have done some reading and it is possable that it doesn't go into fastboot all the way. All it does is stop on the fastboot logo haven't seen a red triangle at all
Click to expand...
Click to collapse
I only stated that because so many times we have posted lengthy responses to this question and it takes a lot to type it all up on a tablet.
You stated you have 2 7" tablets. So stick with Tate.
So in fastboot , that's what you should see, fastboot. You won't see a red triangle and adb will not be recognized. Download the system restore tool here http://forum.xda-developers.com/showthread.php?p=33156486 follow the OP.
Edit: If a fastest cord does nothing to energize your tablet, that's a hard brick.
Edit 2: Update link to proper one.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
stunts513 said:
Plug it in with a normal cable once it's in fastboot, then try my drivers in my signature on the device in the device manager that should say something like tate-pvt or jem-pvt if it is a 8.9" model.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
The only thing i can get on device manager is "unknown device, no drivers installed"
"Instructions:
1.) Download the version you want to use from the link below and unzip.
2.) Enable fastboot mode. Turn off your device then plug into your pc using a factory cable. If the device is recognized by adb then you can use this command:"
quote from kfhd sys restore thread.
note the red, I Can Not Get It Recognized
Shunloc said:
"Instructions:
1.) Download the version you want to use from the link below and unzip.
2.) Enable fastboot mode. Turn off your device then plug into your pc using a factory cable. If the device is recognized by adb then you can use this command:"
quote from kfhd sys restore thread.
note the red, I Can Not Get It Recognized
Click to expand...
Click to collapse
To all still reading i wish to appoliigize for the gruffness and to thank all for the help i have recivied.
Shunloc said:
"Instructions:
1.) Download the version you want to use from the link below and unzip.
2.) Enable fastboot mode. Turn off your device then plug into your pc using a factory cable. If the device is recognized by adb then you can use this command:"
quote from kfhd sys restore thread.
note the red, I Can Not Get It Recognized
Click to expand...
Click to collapse
What that means is if adb is recognized then you can use a command to get into fastboot with a standard USB. This does not apply to you because you're looking. You want to restore your tablet, I have shown you how to.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
Follow this link http://forum.xda-developers.com/showthread.php?t=2551661
I recently installed the wrong boot loader on my Kindle Fire HD 7" (2012). I got the red screen, after doing a lot of research on the forums I obtained a fast boot cable and installed KFFA to attempt to recover it. When I plug the device in using the fastboot cable it comes to the fast boot screen but on my pc it says device not recognized and in the device manager it shows error 43. I rebooted my computer and everything, reinstalled the kindle drivers but nothing seems to work. I even tried another computer thinking it could be my usb port but I got the same error. I tried to test to see if the device was in fast boot mode from another utility and it just sits at "waiting for device". I've tried to connect the fast boot cable and the connect the regular usb cable in after the device was in fast boot mode. I'm not sure what the issue is, the kindle fire seems to respond to being plugged into the computer but the computer does not recognize it. Please help.
Sne3zy said:
I recently installed the wrong boot loader on my Kindle Fire HD 7" (2012). I got the red screen, after doing a lot of research on the forums I obtained a fast boot cable and installed KFFA to attempt to recover it. When I plug the device in using the fastboot cable it comes to the fast boot screen but on my pc it says device not recognized and in the device manager it shows error 43. I rebooted my computer and everything, reinstalled the kindle drivers but nothing seems to work. I even tried another computer thinking it could be my usb port but I got the same error. I tried to test to see if the device was in fast boot mode from another utility and it just sits at "waiting for device". I've tried to connect the fast boot cable and the connect the regular usb cable in after the device was in fast boot mode. I'm not sure what the issue is, the kindle fire seems to respond to being plugged into the computer but the computer does not recognize it. Please help.
Click to expand...
Click to collapse
You can try SRT use option 3 http://forum.xda-developers.com/showthread.php?t=1951254 use only the fastboot cord. Here's some more on error code 43 http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspx Windows
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app
my kf hd 7 is currently in a boot loop after flashing a rom through TWRP.... it gets the yellow kindle fire sign up then reboots over and over.. i have a fastboot cable and it will go into fastboot mode however when i then plug it into the computer with either a standard factory cable or the fast boot cable it says USB Device not recognised and the device has malfunctioned.. i have adb drivers installed and sdk installed. i have tried KFFA and SRT 1.35 but because the pc don't recognise the device it just sits at WAITING FOR DEVICE when i try to run any of the commands. i have used adb before to push files in twrp however i cannot get the pc to recognise it. i have also tried my daughters laptop and still have the same issue ..any ideas guys????
starman99 said:
my kf hd 7 is currently in a boot loop after flashing a rom through TWRP.... it gets the yellow kindle fire sign up then reboots over and over.. i have a fastboot cable and it will go into fastboot mode however when i then plug it into the computer with either a standard factory cable or the fast boot cable it says USB Device not recognised and the device has malfunctioned.. i have adb drivers installed and sdk installed. i have tried KFFA and SRT 1.35 but because the pc don't recognise the device it just sits at WAITING FOR DEVICE when i try to run any of the commands. i have used adb before to push files in twrp however i cannot get the pc to recognise it. i have also tried my daughters laptop and still have the same issue ..any ideas guys????
Click to expand...
Click to collapse
Can you boot into recovery..........u have the option of adb side load then..........make sure u have proper drivers ........
Sent from my Amazon Tate using XDA Premium 4 mobile app
thecoolster said:
Can you boot into recovery..........u have the option of adb side load then..........make sure u have proper drivers ........
Sent from my Amazon Tate using XDA Premium 4 mobile app
Click to expand...
Click to collapse
no it boots to orange kindle fire screen for about 2 seconds then reboots and goes back to orange kindle fire screen. the blue kindle fire screen dosent come on. :crying:
starman99 said:
my kf hd 7 is currently in a boot loop after flashing a rom through TWRP.... it gets the yellow kindle fire sign up then reboots over and over.. i have a fastboot cable and it will go into fastboot mode however when i then plug it into the computer with either a standard factory cable or fast boot cable it says USB Device not recognised and the device has malfunctioned.. i have adb drivers installed and sdk installed. i have tried KFFA and SRT 1.35 but because the pc don't recognise the device it just sits at WAITING FOR DEVICE when i try to run any of the commands. i have used adb before to push files in twrp however i cannot get the pc to recognise it. i have also tried my daughters laptop and still have the same issue ..any ideas guys????
Click to expand...
Click to collapse
Have u tried kindle fire unbrick utility??????
Try using a computer which already has the drivers correctly installed...:thumbup:hope it helps :what:
Sent from my Amazon Tate using XDA Premium 4 mobile app
Yeah I tried it m8. Just sits at waiting for device cause PC doesn't recognise device..I have ordered a new fast boot cable cause the one I was using is a homemade one so gonna see if an official one is any more successful
starman99 said:
Yeah I tried it m8. Just sits at waiting for device cause PC doesn't recognise device..I have ordered a new fast boot cable cause the one I was using is a homemade one so gonna see if an official one is any more successful
Click to expand...
Click to collapse
Yes, use a factory/Flashboot cable and use SRT 1.3.5. With that cable the Kindle will go into fastboot as soon as you connect it to a PC/Laptop which has Fastboot drivers loaded. When you are in the fastboot mode, you can confirm that that teh ADB driver is being used by going to Devices--->Kindle
Use Kindle Fire first aide
You should Kindle Fire First Aide at this link to unbrick your Kindle after fixing drivers.
http://forum.xda-developers.com/showthread.php?t=2096888
Got a Red screen on my kindle fire hd 7", anyone know where I can get a genuine factory cable as I have heard of people ordering one only to find it is just an ordinary cable and not a factory cable, I am in the uk (Scotland)...
PS now total brick...
If you have a Samsung cable you can build one... It has the pins to short together..
Sent from my XT907 using XDA Free mobile app
Kindle fir 7 hd red screen
ok cable will be here on Saturday...Which of these programmes should I use to recover my lindle fire hd 7" from red screen?
Now Total Brick
red screen and now seems total brick
ok used factory cable to recover my kindle fire hd 7" from red screen?
Plugged in cable connected to pc and kindle screen displayed fastboot..all well so far..
Then I used this programme KFFirstAide and used
option 3. Completly Restore the KFHD 7 7.2.3 (Fastboot)
pressed return on pc then programme started then said rebooting kindle, kindle screen went black (no fastboot logo anymore) and it stayed black left it for ages and it did not come on again, eventually I removed kindle fire hd 7 from pc and tried to swith on but nothing happened I tried to connect it to pc again with fastboot cable and nothing happened pc did not recognise it,tried the same with cable that came with kindle and nothing happened. Have tried with no cables connected and nothing. have tried holding power button for 20 seconds then push power button again for 2 seconds but nothing happens still black screen...help is my kindle fire hd7 a total brick...
Not all hope is lost...
Sent from my ASUS_T00I using XDA Free mobile app
I also had Red Screen on my KFHD 7" and need some help. I made a factory cable today and when I plug it in it goes to Fastboot screen. I running Win7 64 and have installed Java SDK and Android SDK and I also installed adb usb drivers from Kindle Fire Utility. However device manager shows it under Other Devices as Tate-PVT-08 and when running KF SRT it just shows "waiting for device" and never changes. I have verified that adb_usb.ini has 0x1949. I've been at this for some time now and I don't know what else to try. I think it may be permanently bricked. I appreciate any suggestions.
phildafunk said:
I also had Red Screen on my KFHD 7" and need some help. I made a factory cable today and when I plug it in it goes to Fastboot screen. I running Win7 64 and have installed Java SDK and Android SDK and I also installed adb usb drivers from Kindle Fire Utility. However device manager shows it under Other Devices as Tate-PVT-08 and when running KF SRT it just shows "waiting for device" and never changes. I have verified that adb_usb.ini has 0x1949. I've been at this for some time now and I don't know what else to try. I think it may be permanently bricked. I appreciate any suggestions.
Click to expand...
Click to collapse
SUCCESS! I was finally able to fix my RSOD. Here is what I did.
1. Opened up Android Studio and SDK Manager.
2. Selected Tools and Manage Add-on Sites.
3 Select User Defined Sites tab and click New and enter.... Sorry, I'm a new user and not allowed to post URL's yet. Search for "Amazon Setting Up Your Development Environment" and url will be under "Installing the Amazon Fire TV SDK Add-on" section.
4. Then scroll down in Manager window and expand Extras then select and install Amazon Kindle Fire USB Driver packages.
5. Connect Kindle with factory cable and open Device Manager, right click on Tate-PVT-08 and select Update Driver.
6. Browse Computer for driver, and select Let Me Pick..., then scroll down and you should now have Kindle Driver available (I didn't have this before).
7. Select Android Composite ADB Interface.
8. Run SR Tool and I had to first select 1 to Restore-Factory Rooted with SuperSU.apk, kept fingers crossed and it finished. (But still had RSOD)
9. Then ran SR Tool again and select 3 for Restore-Factory Recover.
10. Disconnect and cycle power to Kindle and was prompted with a screen saying there was a booting problem and had to Reset to Factory defaults. After that it booted up as new!!!
hard bricked kindle fire hd 7
orgal said:
ok used factory cable to recover my kindle fire hd 7" from red screen?
Plugged in cable connected to pc and kindle screen displayed fastboot..all well so far..
Then I used this programme KFFirstAide and used
option 3. Completly Restore the KFHD 7 7.2.3 (Fastboot)
pressed return on pc then programme started then said rebooting kindle, kindle screen went black (no fastboot logo anymore) and it stayed black left it for ages and it did not come on again, eventually I removed kindle fire hd 7 from pc and tried to swith on but nothing happened I tried to connect it to pc again with fastboot cable and nothing happened pc did not recognise it,tried the same with cable that came with kindle and nothing happened. Have tried with no cables connected and nothing. have tried holding power button for 20 seconds then push power button again for 2 seconds but nothing happens still black screen...help is my kindle fire hd7 a total brick...
Click to expand...
Click to collapse
Just found my kindle fire hd 7" again after moving house, above is what I did and the state kindle fire hd 7" is in now IE:- total brick...
Is there any way of recovering this
Hi, all
I’m a newbie he and I extremely need your support and sorry if I’m starting threat in wrong place. I have my Kindle Fire HD7 2012 TATE bricked during installing a custom ROM. I’ve searched everything but had no chance to find the similar issue solution described.
First I had it stuck on a Kindle Fire logo after rebooting from TWRP after flashing stock ROM again (probably was some problem with a bootmode). Device stopped on Kindle Fire logo and has no reaction. Then I’ve got a factory cable and was able to enter the fastboot and tried change the bootmode with KindleFire Utility and something gone wrong. KF turned off and just sometimes turns on and goes to fastboot (even with ordinary usb cable) just for couple seconds and turns off again. When I connect KF to PC it tries to connect and I hear connect and disconnect USB devise sound constantly. PC even tries to install some drivers for some reason (actually I have KF drivers and ABD installed properly as I it checked with another Kindle).
The second reason is that the the battery is low, as I haven’t charged it for some time and I’m not sure it was charging while was connected when stuck a KF logo. Kindle don't power on and not charging from USB our wall outlett (tried different cables/
Does anyone has any idea? Please help!!!! I will really appreciate any support and thanks to all of you in advance.