Hello !
I just started to work on CyanogenMod build for our device ( P9 Plus ) few days ago .
Today I was able to take the first logcat , and also my device succesfuly boot up on CyanogenMod 13.0 .
The work here is in progress ... but, as soon as I'll have a beta version, a new thread will be opened , and I'll post there all what you need in order to run CyanogenMod on Huawei P9 Plus !
So, please stay tuned
My device : Huawei P9 Plus VIE-AL10 .
Best regards !
Nice to see you around here. I already enjoyed your CM Build on my P6 and this will be the reason to finally unlock my P9 for sure [emoji106]
Gesendet von meinem VIE-L09 mit Tapatalk
Good
Hope you do it for all brands.
Will your CM13 Rom cover all features? Camera, gestures and so on...?
Gesendet von meinem VIE-L09 mit Tapatalk
that would be awesome <3
Great news please do also for L09
/data encrypted by default !
Hello !
As I think , you already know : our device comes with /data encrypted by default ... and this is not very pleasant :crying:
I need to pass this issue ... if someone can help me, please ... you are welcome
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Best regards !
CM-13.0 Booting just fine on P9 Plus !
Hello !
Data successfully decrypted, and for now I can start building and fix issues on CM-13.0 for Huawei P9 Plus !
The first screenshots , taken right now on P9 Plus with CM-13.0 !
Best regards !
Great!
So excited for this. Thank you very much for your effort.
When it released and flashed, is it possible to go back to stock? How is your progress going?
Gesendet von meinem VIE-L09 mit Tapatalk
Very excited to see some progress on this for the P9 models. I assume the hardware-differences aren't big, so a port to the Normal P9 wouldn't be that though?
Good luck with it
surdu_petru said:
Hello !
I just started to work on CyanogenMod build for our device ( P9 Plus ) few days ago .
Today I was able to take the first logcat , and also my device succesfuly boot up on CyanogenMod 13.0 .
The work here is in progress ... but, as soon as I'll have a beta version, a new thread will be opened , and I'll post there all what you need in order to run CyanogenMod on Huawei P9 Plus !
So, please stay tuned
My device : Huawei P9 Plus VIE-AL10 .
Best regards !
Click to expand...
Click to collapse
????????????????
---------- Post added at 04:46 AM ---------- Previous post was at 04:43 AM ----------
surdu_petru said:
Hello !
Data successfully decrypted, and for now I can start building and fix issues on CM-13.0 for Huawei P9 Plus !
The first screenshots , taken right now on P9 Plus with CM-13.0 !
Best regards !
Click to expand...
Click to collapse
thanks very much,and how can we use it,sorry my eglish is very poor:laugh:
Great work
That's great u are doing awesome work keep it up
awesome! keep the good work up.
I am waiting for EVA-L19
T.Tesla said:
????????????????
---------- Post added at 04:46 AM ---------- Previous post was at 04:43 AM ----------
thanks very much,and how can we use it,sorry my eglish is very poor:laugh:
Click to expand...
Click to collapse
Not stable yet, still in testing mode.
Sent from my HUAWEI VIE-L29 using XDA Labs
I eagerly await this ROM
Hello !
I was a bit excited to start building CyanogenMod for P9 Plus ... but right now I'm a little disappointed :crying:
Really don't know if I succeed to build a working new rom for this device ... need a very big long time to check, test, build & hac !
It seems that the work on this device is slightly heavier than I imagined at first ... I have a lot of experience with Huawei devices (is the fifth device Huawei, which I build CyanogenMod) - but this P9 Plus is really annoying, if we refer strictly to the development on this device !
Somehow, I managed to enable ( hack/fix ) HW acceleration , so Mali GPU works like it should ( in the same way like on stock ) on CM-13.0 !
There are a lot of stuff, which currently doesn't work ... but better to see what works :
- encrypted support ! ( without this fix , development is almost impossible... )
- touchscreen
- lights sensors
- internal/external storage
- adb/usb connection
- Wi-Fi
- HW acceleration
The first build will be there as soon as I'll be able to fix Sound and SIM support !
I cannot tell you exactly when will be released the first build , development goes very slowly on this device , but I hope to be ready in a week to maximum four
Best regards !
Hope you will finish it soon. And also you can find help with the issues you are facing.
Hello !
Today I managed to fix some issues : all sensors enabled, bluetooth along with bluetooth tethering & wifi hotspot !
Bluetooth A2DP seems to works fine ... I can use my Sony DR-BT101 to listen music
Audio, Camera, Fingerprint sensor, SIM Network it seems to be harder to fix ( but not impossible ) - I'll try to fix one by one in the next weeks .
Screenshots :
Best regards !
Related
Hello !
<<< Working In Progress - Cyanogen Mod 11 - For Huawei ascend P7 >>>
First, I want to thank you again to all those who have contributed for my P7 device ! ( Huawei Ascend P7 Donors )
I started working to CyanogenMod 11 few days before, ( I started Saturday ) and today was the first day that the device was opened successfully into CyanogenMod .
Because is the first early build, at this time almost all important functions are not operable ... this is normal for the first build.
I will continue to work in this project in my spare time , but will be a long way until we will get a fully functional rom .
I'll keep you posted here with my progress - please do not ask what is working and what not or when will be released !
As soon as CM11 for Huawei Ascend P7 will be ready for beta testers , the new Thread will be created into Ascend P7 Original Android Development .
Besides the two questions mentioned above, you are welcome to ask/post what you think regarding the new project - CM11 for Huawei ascend P7 .
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Best regards !
Good luck sir [emoji122]
Great news Mate, good luck ofcourse, I am a big fan of CM so I can't wait for it
erdi_s said:
Good luck sir [emoji122]
Click to expand...
Click to collapse
Thank you very much ...
And yes, I have really need ... because some functions can be enabled only if I'll have lucky to find a compromise - here we have no source from Huawei related Kirin 910T SoC or Mali GPU .
Best regards !
surdu_petru said:
Thank you very much ...
And yes, I have really need ... because some functions can be enabled only if I'll have lucky to find a compromise - here we have no source from Huawei related Kirin 910T SoC or Mali GPU .
Best regards !
Click to expand...
Click to collapse
I Think someone posted kernel source code in vmall website
high five, great news.
wanamees said:
high five, great news.
Click to expand...
Click to collapse
hello,
Great news, you're doing very good work :good:
Thanks this is a great news. I hope you can also make a Miui rom for L10 WCDMA
Superwitschi said:
Thanks this is a great news. I hope you can also make a Miui rom for L10 WCDMA
Click to expand...
Click to collapse
+ 1000 : P
I like Miui
Good luck to you, guy.
It would be great to have CM on the P7.
Good luck! I am looking forward to test any builds
Thank you very much sir, CM on P7 yayy
This gonna work for all variants? like L12??
Thanks for start the development of Cyanogenmod in the P7
Great news! :good::good::good:
Keep up the good work!
Waiting for your extra good work, I love your work from Archos forum.
Sent from my HUAWEI P7-L10
abokamel said:
Waiting for your extra good work, I love your work from Archos forum.
Sent from my HUAWEI P7-L10
Click to expand...
Click to collapse
and from now on i think it will be easy
open source code
http://en.ui.vmall.com/plugin.php?id=hwdownload&mod=detail&mid=71
lulisat said:
and from now on i think it will be easy
open source code
http://en.ui.vmall.com/plugin.php?id=hwdownload&mod=detail&mid=71
Click to expand...
Click to collapse
Thank you very much for info
Please can you upload on MEGA ? , because it looks like I need five hours to download from vmall ... :crying:
Thanks !
surdu_petru said:
Thank you very much for info
Please can you upload on MEGA ? , because it looks like I need five hours to download from vmall ... :crying:
Thanks !
Click to expand...
Click to collapse
Here you go! https://mega.co.nz/#!DtYwkThb!GIUpYbwzOqVzeA1jyHPGU83rJxkkOay2YFSgqYIVp3I
:good::good::good: Surdu :good::good::good:
good
good
I was surprised when I found that no custom ROM was available for the P8 given how solid the phone itself is. I decided then to port CM 12 myself. Although I have been programming for years, I have never worked on a custom ROM before or tried to build Android. But I thought it would be a great learning experience in any case. And it has definitely been that.
That said, I have spent that last 2 months reading and playing around with CM and made a lot of progress. But I believe I have hit a rock right now. I have asked around a lot, but feel the response has been rather limited. So I'm asking if there are any developers out there that are willing to help with this project so we can together bring CM to the P8 and ultimately other Huawei devices.
The current status of the project is that it builds and gives you a flashable zip file. I can also build the kernel source from Huawei. It does however not boot. I suspect the issue is in the boot.img, and more specifically the ramdisk. No matter what I try, it always gives me the same result after flashing. It shows the Huawei logo then reboots into the recovery. I have spent so much time on it that I feel it needs a new pair of eyes to look at it. It could be very simple or something more complicated. But I do believe I'm very close to getting it to boot. Here is a good summary too of the issue:
http://forum.cyanogenmod.org/topic/120331-help-with-ramdisk-porting-cm121-to-huawei-p8/
For anyone that is interested, I have put the device tree and kernel on Github (I will push an update later today after work since I some stuff in the past week):
https://github.com/debbiche/android_device_huawei_p8
https://github.com/debbiche/android_kernel_huawei_p8
If you have any questions or would like to help or wanna contact me for any reason. You can post here, PM me, or find me on the CM dev IRC channel on the evening (CET).
Thanks.
THANK YOU VERY MUCH!!! I would love to have a CM on this rom... unfortunately i can´t help you but I will support you my friend!! Cheers mate.
Many Thanks
:good:
It s a great news, thanks for your work
Thats awesome mate I hope you get cm to work cm is better then this Huawei ****
Finally ..
Thank you for trying to create this project *. *
It would be awesome to have CM on P8, but it would be difficult choice between CM and emui because of camera app modes and other features like signal+ , touch plus etc...
I Hope some developers will help you with this. Would be sooooooo good to get CM to this device
Some progress is being made
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fisher6 said:
Some progress is being made
Click to expand...
Click to collapse
when we can expect first release? awesome work, glad someone is working on it, i wish i had skills to help you with that :good:
When you need testers let us know
Love <3
I think I can love you if your work finish good
I can't give any ETA.
fisher6 said:
I can't give any ETA.
Click to expand...
Click to collapse
okay then just let us know about progress, good luck :good:
I would love to be a tester
I have the p8 ul10 64gb with the 935 cpu. If you need someone to test I will be more than happy to do it
OmarLuay said:
I have the p8 ul10 64gb with the 935 cpu. If you need someone to test I will be more than happy to do it
Click to expand...
Click to collapse
I don't think that the rom for the LO9 work on UL10
So no rom for ul00
hi there,
im waiting for my p8 to arrive, the l09 version. placed an order few days ago.
i was a bit surprised that there are no custom roms or any mods really for this phone on xda as i always check that before oredering one.
however, the price compared to specs and build quality sold itself for me compared to other high end models..
i will be more then happy to get involved in porting CM to p8, i also know some code but never cooked a ROM before however maybe I can help in some way.
I shall send you PM when phone arrives-cheers.
There is one Custom Rom
But base on Stock.
panda968 said:
So no rom for ul00
Click to expand...
Click to collapse
I don't have a ul00 device at hand so L09 will be one getting the port for now. Of course, if I can get a reliable way to test the port on other devices then I will add support for those too as time goes.
I think it will work because my rom has a ul00 Stock Rom as Base. Kernel work too. Only nfc will not work I think.
Lets keep this simple and clean
I am sharing our rom with you. This rom is based on CM and still in alpha stage. The rom will develope with time and get back to what it was in Kitkat times.
I came back with our rom, because I love android and you and I also need something to train my programming skills. Who am I ? -> Informatics student working at a telecommunication company from germany. Feel free to hit me up on hangouts to chat.
Like always: Flash at your own riks
For screenshots and to understand what makes this special, visit our community
DOWNLOAD :
First Release
https://plus.google.com/+AndreasDanielFried/posts/fq3WitDLpSP
-------------------------------
VO6.1:
https://plus.google.com/+AndreasDanielFried/posts/WDhMrQpJLzx
For newer releases see g+
-------------------------------
Source: https://github.com/VanillaCoding
------------------------------
Please support me by joining our g+ community !
https://plus.google.com/u/0/communities/113421451898131433024
Please also report your experience and bugs / feature request etc. there aswell
Credits: CM, AOKP, DU, SLIM , XenonHD, JesusPartida, CrDroid etc. If you feel bad because I missed you, please contact me
Looking forward to this ROM.
Me 2
1022804219 said:
Me 2
Click to expand...
Click to collapse
Done Enjoy and test
Gapps included?
Gesendet von meinem HTC One_M8 mit Tapatalk
Michael_Behrend said:
Gapps included?
Gesendet von meinem HTC One_M8 mit Tapatalk
Click to expand...
Click to collapse
No, pretty sure you'll have to flash gapps. I have it installed with pico open gapps and it is snappy and smooth so far. There's a few features I miss, but I'm sure they'll add them soon.
Thanks going to take a look!
Runs fluid, very smooth! Simple looking, great functionality. Good job i'd say.
Seems to be quiet stable, too. No complains actually. Will see how it performs as daily driver
Weiter so
Working awesome for me good work thanks
Awesome ROM, very smooth. Works great on Sprint
Smooth and stable experience. Lost only ~2% over night with wireless being on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my m8 using Tapatalk
Very good for an Alpha.
No root. One problem for me is when i scrool thruu a menu the name of the apps (folders) flickers HARD.
Wifi, phone works, wich is Good. On phone, with 2g i've got full signal. I say this because in Bliss, XenonHD & some other roms i got very low signal..
Thanks.
null0seven said:
Very good for an Alpha.
No root. One problem for me is when i scrool thruu a menu the name of the apps (folders) flickers HARD.
Wifi, phone works, wich is Good. On phone, with 2g i've got full signal. I say this because in Bliss, XenonHD & some other roms i got very low signal..
Thanks.
Click to expand...
Click to collapse
In developer Settings you can enable root. Nothing should Flicker
it works. Not really much settings/mods but it´s stable and fast. Läuft!
Release 3
What did you expect for an alpha ? First we were in need for a fast and stable base build !
--------------------------------------------------
Btw: New release here for you guys
https://plus.google.com/+AndreasDanielFried/posts/4JoMvE5LFhQ
Enjoy !
Hello... On which version of Android is based this ROM? Android 6.0 Marshmallow?
This ROM is compatible also with the version DualSIM "m8dug"? Thank y very much!
pickmod said:
Hello... On which version of Android is based this ROM? Android 6.0 Marshmallow?
This ROM is compatible also with the version DualSIM "m8dug"? Thank y very much!
Click to expand...
Click to collapse
It's on Android 6.0.1. I don't know if it's compatible with m8dug but it works with CDMA devices so maybe. You could try it out. Make sure you make a nandroid first
Sent from my HTC One_M8 using Tapatalk
Hello, this ROM is compatible also with the version DualSIM "m8d"?
Thanks!
I have a question, I can't find my external SD, what do I do?
Can someone guide me step by step?
Any way to enable sweep to sleep?
KiD3991 said:
I have a question, I can't find my external SD, what do I do?
Can someone guide me step by step?
Any way to enable sweep to sleep?
Click to expand...
Click to collapse
Sweep to sleep is a Kernel Feature. About external SD, did you Mount it right. Also please use Q&A Threads
Hi.
Is there any developer create Android 7 Rom for the Huawei mate s. Would love to get android nougat on the mate s.
Thanks.
Unfortunately there is no developer who is interested in porting the cm 13 version of the honor 7 to our mate s.
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk
New Hope [emoji6]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://cloud.tapatalk.com/s/590ee5720eda1/Screenshot_2017-05-07-11-13-53.png?
Source: [Custom Rom] "Phoenix V.1" Huawei Mate S -CRR-L09C432B390 (Entwicklung)
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk
Source code for Android 6 MM
Hello,
yesterday I write an email to Huawei Support for download link to MM Source code for Mate S, if I receive it, is there any chance for LineageOS Nougat or Oreo ROM?
P.S.: Sorry for my bad English.
FrostPE said:
Hello,
yesterday I write an email to Huawei Support for download link to MM Source code for Mate S, if I receive it, is there any chance for LineageOS Nougat or Oreo ROM?
P.S.: Sorry for my bad English.
Click to expand...
Click to collapse
I'd love a port of Lineage OS on the Mate S too :crying:
Finally
Hello for everyone, after very long email communication with Huawei support I was finally succesfull and recieve Source Code for Android 6.0 Marshmallow for Huawei Mate S. Here are links for download:
1) https://app.box.com/s/e008lebhvvo1xv0lxebvzfmx385kyqqd
2) http://download-c1.huawei.com/downl...oadId=97073&version=402728&siteCode=worldwide
This open a chance for better Custom ROMs and hopefully for deserved Nougat ROM.
Enjoy it.
FrostPE said:
Hello for everyone, after very long email communication with Huawei support I was finally succesfull and recieve Source Code for Android 6.0 Marshmallow for Huawei Mate S. Here are links for download:
1) https://app.box.com/s/e008lebhvvo1xv0lxebvzfmx385kyqqd
2) http://download-c1.huawei.com/downl...oadId=97073&version=402728&siteCode=worldwide
This open a chance for better Custom ROMs and hopefully for deserved Nougat ROM.
Enjoy it.
Click to expand...
Click to collapse
For a nougat rom, the mate s does not meet the technical requirements. I'm working on a miui rom, MM.
Possibly nougat on mate S
hi, i have found this on internet, can't understand the language but i think it is from hungary, is this real????
forum.mantab.me/thread/9412/custom-rom-nougat-71-huawei-mate-s-32gb-unofficial-lineage-os
sylar88 said:
hi, i have found this on internet, can't understand the language but i think it is from hungary, is this real????
forum.mantab.me/thread/9412/custom-rom-nougat-71-huawei-mate-s-32gb-unofficial-lineage-os
Click to expand...
Click to collapse
Rom doesn't exist. This is one of the usual methods to lure stupid users into advertising, subscription or casinos.
So, I noticed that there is a beta of Lineage OS for the P8, which has almost the same hardware as our Mate S: https://forum.xda-developers.com/huawei-p8/development/rom-lineageos-13-0-14-1-t3585290 This is Android 7 and 6, so that means that Android 7 (N) should also work on our Mate S (https://www.gsmarena.com/compare.php3?&idPhone2=7533&idPhone1=7006)
I believe porting this beta to Mate S shouldn't be that difficult for a dev with some experience (I'm afraid I have 0 experience and knowledge).
Maybe someone better suited could take a look at this? I can help with whatever I can.
You're wrong about the p8. Search for roms for the Honor 7. These will work on the mate s. I've tested several. But no sim is recognized at all and wifi is not possible. My mate s has a display damaged. That's why I couldn't think of a solution.
Oh, now that makes sense. Thanks for the clarification!
Well, if you ever wanna test remotely I'm sure there's a bun hat of us who would risk testing experimental builds
Alternatively people could donate to you so you could buy a mate s or maybe fix yours.
If you could build pure aosp I would gladly donate to see that happen.
Cheers!
ChinHon said:
You're wrong about the p8. Search for roms for the Honor 7. These will work on the mate s. I've tested several. But no sim is recognized at all and wifi is not possible. My mate s has a display damaged. That's why I couldn't think of a solution.
Click to expand...
Click to collapse
No one knows the mate's as well as I do. Developed the first rooting, supersu tuned to it, built an extra kernel and make some emui custom roms. Some good developers have tried a porting. Not yet possible.
Arsenik Rom
For Honor 5c
I DO NOT OWN THE DEVICE SO FLASH IT AT YOUR OWN RISKS !
ALL CREDITS GOES TO KangV !!
ASK PERMISSION BEFORE TAKING MY WORK(EVEN PARTIALLY)
FEATURES
+based on b356 version
+pre-rooted with chainfire's SuperSu 2.78
+Kernel adiutor installed
+Emui theme editor installed
+Fingerprint quick action installed
+ double tap to wake up, draw a letter to wake up added(dont know if it work)
+ deleted all huawei chinese apps and added some missed google apps
+NEM-L31
+transparent notification shade enabled
+App twin added
+p10 camera app added
+android O bootanimation added
+android O emojis
+3d panorama app addeD
+adblock -MoaAB- via k-setting
+new Viper4Android interface for 2.5
+raw image mode added
+slow motion camera mode
+KangVip framework added !
INSTRUCTIONS
1.Reboot to latest TWRP ( twrp for honor 5c nougat will be available soon)
2.backup system,boot,vendor
3.Wipe system,cache&dalvik-cache
4.Flash Arsenik Rom
5.reboot system(it will take about 10-15min)
DOWNLOAD LINK
REMOVED
BUGS
+you tell me ?
NOTES
+do not update supersu binaries because it won't work
CREDITS
+KangV for his awesome Kangvip Framework !
+ @Tecalote for helping me
+ @Chainfire for his awesome superSU
+ @millo1978 for giving a fix to call recording
+ @BSDgeek_Jake for creating the amazing MoaAB !!
+ @zgomot for the tip of enabling raw mode
i spent endless hours so as to make kangvip framework working on our p9 lite, every donation will be much appreciated!
@storm313 may test.
adriansticoid said:
@storm313 may test.
Click to expand...
Click to collapse
I will happily be y'all tester but I need help with my phone I flashed lineage os and I can rollback!
I did a TWRP Backup - [IMG="this is what i see inside the folder... doesnt even show up as a zip file so i dont know"]https://ibb.co/c2FJCv[/IMG]
I also have a full OTA Update as well that I had backed-up!
Please help me get back to stock! :crying:
storm313 said:
I will happily be y'all tester but I need help with my phone I flashed lineage os and I can rollback!
I did a TWRP Backup -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I also have a full OTA Update as well that I had backed-up!
Please help me get back to stock! :crying:
Click to expand...
Click to collapse
Let's not discuss it here. Create a new thread for this,
it seems that the twrp of honor 5c won't be released ( except if a miracle occurrs)
someone has reported that the twrp of p9 lite works well in honor 5c , https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
so if anyone wants, try to flash Arsenik and send me your feedbacks, DONT FORGET TO BACKUP SYSTEM , BOOT VENDOR
Is that fully supported?
gopinaidu77 said:
Is that fully supported?
Click to expand...
Click to collapse
my answer was based on that https://forum.xda-developers.com/honor-5c/development/twrp-t3590615
simo255 said:
my answer was based on that https://forum.xda-developers.com/honor-5c/development/twrp-t3590615
Click to expand...
Click to collapse
Then it should work.
Sent from my Honor 8 using XDA Labs
simo255 said:
my answer was based on that https://forum.xda-developers.com/honor-5c/development/twrp-t3590615
Click to expand...
Click to collapse
Ok ,thank you
I would test if this work on NEM-L22 model
shashank1320 said:
I would test if this work on NEM-L22 model
Click to expand...
Click to collapse
i dont know, im not sure , try and tell me
shashank1320 said:
I would test if this work on NEM-L22 model
Click to expand...
Click to collapse
I think it will work too.
9 downloads and no feedbacks ?
I'm on NMO-L31 can't use this rom, it bootloop. But i can use your p9 lite version of this rom
gunz098 said:
I'm on NMO-L31 can't use this rom, it bootloop. But i can use your p9 lite version of this rom
Click to expand...
Click to collapse
hello
thank you for your feedback
did you wait at least 10-15 min?
p9l rom works on honor 5c? have you any bugs?
tell me more please
It is rediculous. The thread owner. if you do not dare trying flashing this ROM on your device, pleaese do not post here and begging people give it a try then feedback.
The ROM even does not belong to you as you just re-posted it.
stevedat said:
It is rediculous. The thread owner. if you do not dare trying flashing this ROM on your device, pleaese do not post here and begging people give it a try then feedback.
The ROM even does not belong to you as you just re-posted it.
Click to expand...
Click to collapse
wtf
i do not own the device
i created this rom for p9l and build a version for honor 5c, thats all !
stevedat said:
It is rediculous. The thread owner. if you do not dare trying flashing this ROM on your device, pleaese do not post here and begging people give it a try then feedback.
The ROM even does not belong to you as you just re-posted it.
Click to expand...
Click to collapse
Do you have any proof for that?
simo255 said:
wtf
i do not own the device
i created this rom for p9l and build a version for honor 5c, thats all !
Click to expand...
Click to collapse
Do u own p9 lite?
It seems that u are so kind to spend yr time working on what you do not own just for people. That will be so good. Honor 5c
stevedat said:
Do u own p9 lite?
It seems that u are so kind to spend yr time working on what you do not own just for people. That will be so good. Honor 5c
Click to expand...
Click to collapse
-_-
ive just made a small modification of p9lite build since both phones have same specs.