I've flashed my Huashan Xperia SP (C5302) through fastboot... and with a custom kernel (.elf).
As a result- I got the CWM Based recovery version 6.0.3.2---- I became happy..
But when I went to install zip then, I faced everytime "status 7" error..{Even I tried 3 different CM 13 ROM}
I tried to fix it after going through the articles online.... then it I faced "error 6"
I tried a long time to fix that anyway... But I could'nt
I deiced to repair my software with SONY pc companion, but here mainly two problems what are irritating me... alike- driver problem(when I connect my device to pc then it finding out the driver for Huashan and windows update), blue light problem (we all know in the fastboot mode the niddle notificatin led lit blue, but it lit green) please!! any one help me to solve these problem... or lead me, what should I do?
The problem you're facing, that of unable to install the CM13 zip might been due to the zip update-binary being incompatible with the old recovery you are using.
You are advised to start over with official TWRP, located in the device Original Development subforum.
http://forum.xda-developers.com/xpe...t/recovery-twrp-3-0-0-touch-recovery-t3309938
If you are still stuck with your problem of drivers, you may use DoomLord's Xperia Drivers pack: http://forum.xda-developers.com/showthread.php?t=2635830
thank you ☺ and also thank the post..... I already solved my problem....
TechnoSparks said:
The problem you're facing, that of unable to install the CM13 zip might been due to the zip update-binary being incompatible with the old recovery you are using.
You are advised to start over with official TWRP, located in the device Original Development subforum.
http://forum.xda-developers.com/xpe...t/recovery-twrp-3-0-0-touch-recovery-t3309938
If you are still stuck with your problem of drivers, you may use DoomLord's Xperia Drivers pack: http://forum.xda-developers.com/showthread.php?t=2635830
Click to expand...
Click to collapse
Related
Hi
I have a P990 with a possible dead USB. It had a CyanogenMod 9.0.0 on it when it arrived.
Trying to revive the USB, I've found ocr66 post here: http://forum.xda-developers.com/showthread.php?t=1981359
I've followed the first post's step by step instructions:
-installed R2
-restored the provided back-up in that post (mexico)
Unfortunately, now the phone is stuck loading after reboot. The horizontal spiral under the LG sign is rolling several seconds, than it's stopping and that's it.
I'm able to go into recovery mode still.
Also, I have in hand a stock firmware (kdz), but I do not know if it is of any use from cwm recovery, and of course, usb is not functioning (that's why I've followed ocr's instructions).
Any advice please ?
Thank you,
Thanks
nick61 said:
Hi
I have a P990 with a possible dead USB. It had a CyanogenMod 9.0.0 on it when it arrived.
Trying to revive the USB, I've found ocr66 post here: http://forum.xda-developers.com/showthread.php?t=1981359
I've followed the first post's step by step instructions:
-installed R2
-restored the provided back-up in that post (mexico)
Unfortunately, now the phone is stuck loading after reboot. The horizontal spiral under the LG sign is rolling several seconds, than it's stopping and that's it.
I'm able to go into recovery mode still.
Also, I have in hand a stock firmware (kdz), but I do not know if it is of any use from cwm recovery, and of course, usb is not functioning (that's why I've followed ocr's instructions).
Any advice please ?
Thank you,
Thanks
Click to expand...
Click to collapse
If it bootloops then maybe you will have to do a full wipe/format system. as you were in CM9 before, I assume that you are still in old bootloader.
you can comfirm this whilethe device is preparing to enter the old / new bootloader. The cracked new Boot loader has a pink LG logo.
As you are able to go to recovery, use the PA old boot loader....from tonyp....just download it form the dev section to the Ext SD Card. Then make a full wipe again from the recovery
flash the PA and also Kowalski Kernel. you are ready to go my friend
BTW, How do you charge if the USB port is not working....remove battery?
USB is still charging, but there is no sign of life in data communication with PC (exactly as in the ocr's mentioned post above, no question mark in device manager or anything else).
As far as I've understood until now, I am and I was on the old bootloader (LG sign is white at boot).
Maybe a little bit further details could be of help (I need to find and read your details, don't know exactly where to find tonyp bootloader and kowalsky kernel, what is PA a.s.o.)
Thank you,
nick61 said:
USB is still charging, but there is no sign of life in data communication with PC (exactly as in the ocr's mentioned post above, no question mark in device manager or anything else).
As far as I've understood until now, I am and I was on the old bootloader (LG sign is white at boot).
Maybe a little bit further details could be of help (I need to find and read your details, don't know exactly where to find tonyp bootloader and kowalsky kernel, what is PA a.s.o.)
Thank you,
Click to expand...
Click to collapse
you need to look out in the dev section....its ParanoidAndroid 2.6. Its stock Kernel is Kowalski...so no worry for you.
Did you try with a new USB cable?maybe your cable is broken...i mean the data contact....
For the data communication with PC, you need to install the USB drivers....check out on google and install it. then it will be connected. if you want to have without that, install on device and PC the MyPhone Explorer a free app...which can transmit or receive data on wifi, bluetooth or USB cable.
Hope this helps you
Of course I've changed the cable, the usb port, I've changed even the PC, but no communication, only charging, so it's not a driver problem (PC does not react in any way when connecting the phone).
Thanks, I'll try to follow your advice,
Hi again,
I've succeeded to simply recover a backup in CWM, from sdcard. But the USB problem is still there.
Let's put the problem in other words: I'm trying to access the "hidden" menu, with 1809#*990# as explained in the ocr's thread mentioned in the first post here, to try to revive the USB port.
But that hidden menu is inaccessible from CM 9.0.0.0 that I have now. So, I need to push a stock ROM, without using USB, only via sdcard. I'm assuming that in the stock rom the hidden menu is accessible.
I'm on the old bootloader. I need a zip packed stock GB ROM.
I've found an ICS 3.0A for CWM install but it does not work, most probably because of the old bootloader I have.
So, could someone post a link with a zipped GB stock ROM that can be installed with CWM directly from SDcard ?
Thank you,
Here's one I found in the development section -
http://forum.xda-developers.com/showthread.php?p=31600327
The download links seem to be active still
Sent from my LG-P990 using Tapatalk 2
Yep,
It perfectly did the trick, thanks kingvortex, and everyone who helped me.
Unfortunately, the USB is hardware broken, I was able to access the hidden menu and the tests just confirmed this trouble. But at least the phone is usable.
If anyone knows some other GB stock firmware (2.3.6 ?), but ready to be installed only via sdcard and CWM, it would be very usefull, because it seems that 2.3.4 has a known bug that prevent apps installation from a newer version of the market (google play) - I've read about this bug here on xda.
I would prefer gingerbread because:
- the phone has the old bootloader
- the usb is broken
- it seems that GB is faster than ics on p990
Thanks,
Hello
I hard bricked my xperia sp while trying to install cm11.
Ive found a solution from a thread regarding the similar issue by using flashtool.
But my problem is I couldnt install the flashtool both in my win7 and 8 laptops.
Ive tried 2 driver installers but they still wouldnt install.
They'd just get installed in a temp folder then would be deleted at the end of the installation process.
Please help.
jxstin said:
Hello
I hard bricked my xperia sp while trying to install cm11.
Ive found a solution from a thread regarding the similar issue by using flashtool.
But my problem is I couldnt install the flashtool both in my win7 and 8 laptops.
Ive tried 2 driver installers but they still wouldnt install.
They'd just get installed in a temp folder then would be deleted at the end of the installation process.
Please help.
Click to expand...
Click to collapse
That is the part of the installation process... Go to C:\flashtool and then launch flashtool from there.
Hi!
I'm new here and I have a problem, a huge one to be specific. The main problem: my phone don't want to boot at all, no sony logo, no anything, just a flash of the bottom light (previously a vibration, but for some reason its gone...). When I plug it to my pc it puts itself to flash mode. I previously put existenz 3.0.0 on it without any trouble and I wanted to put Cyanogenmod 11 on it becouse I didn't liked existenz that much. But afterwards my phone don't want to boot. I tried to flash a standard android 4.1 onto it but it just stopped for some reason and stuck. Btw it's a T-mobile phone, and the bootloader is locked.
WHAT SHOULD I DO?!?!? :crying:
Flash for your model .ftf with flashtools
Yes, flash for your model .ftf with flashtool! Then the phone will work!
dumb042 said:
Hi!
I'm new here and I have a problem, a huge one to be specific. The main problem: my phone don't want to boot at all, no sony logo, no anything, just a flash of the bottom light (previously a vibration, but for some reason its gone...). When I plug it to my pc it puts itself to flash mode. I previously put existenz 3.0.0 on it without any trouble and I wanted to put Cyanogenmod 11 on it becouse I didn't liked existenz that much. But afterwards my phone don't want to boot. I tried to flash a standard android 4.1 onto it but it just stopped for some reason and stuck. Btw it's a T-mobile phone, and the bootloader is locked.
WHAT SHOULD I DO?!?!? :crying:
Click to expand...
Click to collapse
It is best to try again. I hope it will work. Just make sure the ftf you downloaded is for your device. Also make sure drivers are properly installed. To have all drivers installed, navigate to Flashtool install directory, there is a folder called "drivers", get into it and run the installer there in. Choose "flashmode drivers" and "fastboot drivers". Scroll down a bit, find "Common drivers for Viskan board" and tick that as well.
Your phone can still boot up - that's a good indicator. If it does not react at all, you could have been told by the community that your device was hard bricked. Luckily it isn't.
thanks for all the replys, flashing worked and its running cm11 with ő ne probléma: it cannot fibd the internal storage , anyag solutions?
Hi everyone !
I've a Xperia SP which wont turn on anymore ... i installed a recovery, made a wipe factory, since it doesnt turn on :'(
Just so you know, i installed PhilZ Touch and TWRP (but i dont succeed to access them now, if someone know the manipulation ...)
However, i can access the Flash Mode, so I installed Flashboot (9.19.8), installed ALL the driver which were available in the "driver" directory, and tried to flash 4 differents TFT files, i tried on every USB port, with an officiel USB cable from Sony... didnt work
I've always the same error: Processing of system.sin finished with errors.
and then, the phone boot on "Sony" logo, then turn off, finally go in flash mode again endlessly as long as i let it plugged to my PC.
I dont know what to do, so here i am. Maybe all the rom i tried arent stock or arent compatible with my Locked bootloader ? Maybe its too low in battery (but before the recovery installation, it has something like 75% ...).
Thanks for your help !
roxasaxel said:
Hi everyone !
I've a Xperia SP which wont turn on anymore ... i installed a recovery, made a wipe factory, since it doesnt turn on :'(
Just so you know, i installed PhilZ Touch and TWRP (but i dont succeed to access them now, if someone know the manipulation ...)
However, i can access the Flash Mode, so I installed Flashboot (9.19.8), installed ALL the driver which were available in the "driver" directory, and tried to flash 4 differents TFT files, i tried on every USB port, with an officiel USB cable from Sony... didnt work
I've always the same error: Processing of system.sin finished with errors.
and then, the phone boot on "Sony" logo, then turn off, finally go in flash mode again endlessly as long as i let it plugged to my PC.
I dont know what to do, so here i am. Maybe all the rom i tried arent stock or arent compatible with my Locked bootloader ? Maybe its too low in battery (but before the recovery installation, it has something like 75% ...).
Thanks for your help !
Click to expand...
Click to collapse
Please use 0.9.18.6 or 0.9.19.8. Download the proper version of Flashtool here: http://www.flashtool.net/downloads.php
Then download the stock firmware by using Xperifirm that comes with the Flashtool, afterwards flash the stock firmware.
Also what Windows are you on?
I search for 6hours without anything, i post here ... and 10min after i found the problem ...
Flashtool isnt working for my phone after the 9.18.6 version o_o
so its ok now ! ty
Edit: ty techno, i already found !
roxasaxel said:
I search for 6hours without anything, i post here ... and 10min after i found the problem ...
Flashtool isnt working for my phone after the 9.18.6 version o_o
so its ok now ! ty
Edit: ty techno, i already found !
Click to expand...
Click to collapse
Nice
But have you solved your problem??
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Have you installed Lenovo's USB drivers?
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Hi install USB driver properly not regular driver search how root k3 on xda at this thread you got USB driver link go head or follow proper step on xda. If solution not work again let me know then I gave next procesed. T thank first you don't worry if you're phone boot .
ru7494 said:
I replaced recovery from twrp v3.0.0 to stock recovery using its image and my phone is in bootloop and when I boot my phone it shows the first screen . After a lot of research I found its the bootloop.
But the main problem is that SP flash tool cannt detect my phone so I am unable to flash it again and install new recovery in it. I have installed k3 note manager, pda net ,ADB driver and many other but still it's not working.
Can anyone help me out regarding this problem
Click to expand...
Click to collapse
Hi mate..
Don't worry if your phone is stuck in a boot loop. Remove the battery, put it back again and connect your phone to PC with the SP tool loaded with TWRP in download(connect phone after clicking download button). This should install recovery on your phone. In case if this does not work, try other methods over the internet.
If any of the methods don't work, then download a stock ROM from needrom and flash it using SP flash tool. Note that this will erase the data stored in nvram (imei, mac, s/n). I assume that u have taken a backup before. Please do consider this as ur last step if anything does not work
Thanks and good luck...