Hey guys
I have a Tilt and recently installed BTA so that I could channel music to my earpiece. I didnt like the sound quality so I uninstalled it. No I cant pair my bluetooth anymore. The two messages I always get is Problem with hardware, and bluetooth radio is turned off. I tried to pair a brand new bluetooth today, still no success. Perhaps one of my registry settings were changed. Please help.
if you uninstalled the program properly then there shouldnt be any problems. Go into your bluetooth app and make sure the b/t is turnt on and visible then going to the devices section you should be able to ad new device and if it is an earpiece should show a h/set next to it.
Hi guys,
I am having problems with car BlueTooth hands free and Samsung Galaxy S:
With Eclair 2.1 it was working flawlesly, connected automaticlay after paired, I could make phonecals, receive phonecals, no quality issue, phonebook worked fine etc... The only problem was that once I did not swithced the BT on my SGS before starting to drive, for some security reasons the car was not searching for phones while driving, so I had to turn the BT in car off and on again and then it connected well. But overal problem free...
With latest 2.2 Froyo (i9000xfjp7) and also previous Froyo distributions (i tried JPA if I remember correctly), the phone can be paired, it connects to the car but after one phonecall it looses connection and works no more. The strange thing is, the BT icon on the phone shows brackets (like when connected) and also the car shows the phone is still connected. But phonecalls cannot be made via car HF and also cannot be received through it. Only by manualy accepting or dialing on the phone. And naturally the sound goes only via the phone, no HF.
The strange thing is, when I turn off the car and leave it, the phone says it is still connected to it, which is impossible.
Any ideas?
Thank you!
czechmate said:
Hi guys,
I am having problems with car BlueTooth hands free and Samsung Galaxy S:
With Eclair 2.1 it was working flawlesly, connected automaticlay after paired, I could make phonecals, receive phonecals, no quality issue, phonebook worked fine etc... The only problem was that once I did not swithced the BT on my SGS before starting to drive, for some security reasons the car was not searching for phones while driving, so I had to turn the BT in car off and on again and then it connected well. But overal problem free...
With latest 2.2 Froyo (i9000xfjp7) and also previous Froyo distributions (i tried JPA if I remember correctly), the phone can be paired, it connects to the car but after one phonecall it looses connection and works no more. The strange thing is, the BT icon on the phone shows brackets (like when connected) and also the car shows the phone is still connected. But phonecalls cannot be made via car HF and also cannot be received through it. Only by manualy accepting or dialing on the phone. And naturally the sound goes only via the phone, no HF.
The strange thing is, when I turn off the car and leave it, the phone says it is still connected to it, which is impossible.
Any ideas?
Thank you!
Click to expand...
Click to collapse
Had exactly same issue I changed to Doc Rom JP8, for last 3-4 days didn't face any issue.
Monu123 said:
Had exactly same issue I changed to Doc Rom JP8, for last 3-4 days didn't face any issue.
Click to expand...
Click to collapse
That is weird... When I switch back to Eclair, it works OK, back to Froyo, no HF after one phonecall...
I dont know how to work with ROMs, I managed to find out how to flash firmwares, I even handled many problems with Odin and its moods, incomplete flashes, etc... But I dont know how to use these custom ROMs...
Anyway, i would appreciate if someone told me how to resolve it without custom ROMs, as I plan to use offical Froyo when it becomes available, but with this issue, it is useless for me, as I travel a lot...
No one else?
I'm having a related problem.
I'm getting music stream cut outs (1 sec max) when streaming bluetooth to caraudio WHILE wifi on.
If i disable wifi, bluetoothaudio works fine. I know they share range bt/wifi, but this is unacceptable. They should negotiate. Everytime wifi scans, i get cutouts. Unusable. Only workaround is disabling wifi (and thats annoying because i have to be constantly activating/disabling it everytime i enter somewhere with wifi etc.
Using Docrom xxjpo v8 with voodoo.
Anyone has some software fix that makes wifi behave better when bluetooth musictream on?
Hi guys, i am currently using Rocket Rom v23 and abyss kernel. At first my bluetooth device (wp 250 creative headset) is working just fine. But after several days the bluetooth is not working anymore even though it can recognize the device but when i connect it there is no music playing.
i tested my bluetooth device and it works on my sgs and itouch
i tested my galaxy note bluetooth to pair with sgs and it works
-what i did to resolve it before was to go back stock rom then v22 to v23 but it is hell of a work.
can u pls help me to work around this issue? thank u
kwelito_88 said:
Hi guys, i am currently using Rocket Rom v23 and abyss kernel. At first my bluetooth device (wp 250 creative headset) is working just fine. But after several days the bluetooth is not working anymore even though it can recognize the device but when i connect it there is no music playing.
i tested my bluetooth device and it works on my sgs and itouch
i tested my galaxy note bluetooth to pair with sgs and it works
-what i did to resolve it before was to go back stock rom then v22 to v23 but it is hell of a work.
can u pls help me to work around this issue? thank u
Click to expand...
Click to collapse
I remember I had this problem with Sennheisser MM100 headphones a while back. From memory I unpaired and removed the device, then re-paired the phones. I may have done a reboot of the note after I unpaired the device, can't remember as it was a long time ago. I have not had a problem since.
I have the same problem as kwelito_88. I managed to use my Creative WP-250 headset for just 3 weeks before it decided to stay mumb on me.
I "unpair" the headset with my phone but now my phone just couldn't see this headset when it scans for devices.
Any one out there know how to get both gadgets working again? Thanks.
Do you have a BT laptop you can try pairing your Note with? If it works that will rule out the Note as the problem.
You've probably already fully charged the headset and checked that they are definitely in pairing mode so that the Note can see them? My Sennheisers are bit touchy and didn't go into pairing mode properly until I pressed harder on the switch button.
TempusFudgeIt said:
Do you have a BT laptop you can try pairing your Note with? If it works that will rule out the Note as the problem.
You've probably already fully charged the headset and checked that they are definitely in pairing mode so that the Note can see them? My Sennheisers are bit touchy and didn't go into pairing mode properly until I pressed harder on the switch button.
Click to expand...
Click to collapse
Thanks! I can now confirm the Note is not the problem.. it pair & connect to my BT laptop easily.. So the Creative wp-250 headset is where the fault is. Guess I won't be looking at Creative products for a while.
Thanks for the tip
Hmm. I have a duff/non-compliant Jabra headset too. That tip with pairing with "known good" worked a treat.
Wondering if anyone else are having issues with the bluetooth on the note 5. One issue I'm having is the connection to my galaxy gear disconnects and reconnects randomly and after a few disconnects seems like the phone just ignores the gear and manual connection only works 50% of the time other times I have to reset the phone to regain connection. Other problem Im having, which I cant figure out, is my car bluetooth stereo connects with no issue to my phone but when using calling it uses the car speakers for output audio but the phones mic for input audio. Tried my S5 and the stereo works perfectly. Any suggestions? I've tried wiping caches, unpairing repairing devices. Factory reset (which worked for about a few hours but started the same issues again). I was thinking it may be software related but no software or updates were installed between the factory reset and having issues again.
Yes I'm having the same problem with my gear s2 just got off the phone with tmobile there sending me a new note 5 hopefully it will fix it I'll update after the switch
danjnoble said:
Wondering if anyone else are having issues with the bluetooth on the note 5. One issue I'm having is the connection to my galaxy gear disconnects and reconnects randomly and after a few disconnects seems like the phone just ignores the gear and manual connection only works 50% of the time other times I have to reset the phone to regain connection. Other problem Im having, which I cant figure out, is my car bluetooth stereo connects with no issue to my phone but when using calling it uses the car speakers for output audio but the phones mic for input audio. Tried my S5 and the stereo works perfectly. Any suggestions? I've tried wiping caches, unpairing repairing devices. Factory reset (which worked for about a few hours but started the same issues again). I was thinking it may be software related but no software or updates were installed between the factory reset and having issues again.
Click to expand...
Click to collapse
hi,
i have Note5 stock Rom, no root. I also have a Gear watch (still on Android.. not Tizen, rooted, Null 23 Rom) Been using the Gear watch since launch with my then Note 3, Note 4 and now with Note5.
Overall no problems at all. Only replaced the watch battery a month back thats all.
My Bluetooth connection to all my devices has been overall, very good.
I am currently using my Gear with Note5. The Bluetooth connection is very, very good. i cannot recall it ever disconnecting from Note5. (if in acceptable distance.. +-
10 metres or so.) Overall Gear is working 100%.
Point i am making is according to my experience, Bluetooth connection with Note5 works fine... no disconnecting issues.
I know this doesn't solve your issues,
but good to know.
Good luck
I'm wondering if I may have a hardware issue. If connected to a BT device (eg gear) and I move more than a couple ft from the device connection is lost. I'm very confused with my car stereo though, what would cause BT to split and use my phones mic and the stereos speaker not the stereo mic? Anyone ever experience a similar issue?
danjnoble said:
I'm wondering if I may have a hardware issue. If connected to a BT device (eg gear) and I move more than a couple ft from the device connection is lost. I'm very confused with my car stereo though, what would cause BT to split and use my phones mic and the stereos speaker not the stereo mic? Anyone ever experience a similar issue?
Click to expand...
Click to collapse
hi,
futher i can add,
i use Note5 Bluetooth
with following devices no issues. No disconnecting issues or any other issues.
Polor M400 Bluetooth Hart rate watch( re smart notifications) ,
Jam Bluetooth headset (streaming music) ,
Phillips Bluetooth dock.( streaming music.)
My Lenovo laptop,( Sending of pics, apps etc)
and use it to connect to my other Phone devices etc
Never had any issues with disconnecting.
Given that the devices are normally
about 2 meters apart when in use sometimes 10...12 meters.
I would suggest you get you device checked, as yes it does not seem right
that it disconnects so easy (when so near)
good luck
This might be an odd question but how would someone go about testing the phones BT, it connects just not stable. Only reason Im asking is I dont want to send it to samsung and have to wait 2-4 weeks and them to come back and say its working.
danjnoble said:
This might be an odd question but how would someone go about testing the phones BT, it connects just not stable. Only reason Im asking is I dont want to send it to samsung and have to wait 2-4 weeks and them to come back and say its working.
Click to expand...
Click to collapse
hi ,
yes ,i understand, you don't want to wait for period of time ,w/o your phone. !!!
I would have maybe done some "little tests" , to get a better opinion of the Bluetooth issue ??
eg. Test your devices in environment/area where there is no interference , ( no concrete walls ,buildings ...an open area .No electric cables/towers )
An open area ,field or another locations than your home or workplace etc .
See what is you min. and max. distance on disconnection ,if it only occurs more at your home than another area .? Get some facts and maybe make a small video to illustrate your issue ?
and show it to "someone" in the know ???
eg ..If you bought phone through service provider show video to them ./Samsung ( i have a habit that when i have a issue ..........................
eg. broken roof tiles/wall socket /a damage car part ......etc etc ....
i would take photo's/video ,(with my phone and keep copy on my phone ) and when talking to "somebody" in the know/or send your device to Samsung ,show them photo's /video of issues. It helps them to understand your issues better ,
and maybe give you better advice on issue ?
Also ,try to compare you results with somebody with similar device ???
Google is your friend ???
Google around ..???
you might just learn something in process ,that can help ?
Above is basics of what i would have done .
good luck
Bluetooth firmware v 4.2 and older versions .
danjnoble said:
This might be an odd question but how would someone go about testing the phones BT, it connects just not stable. Only reason Im asking is I dont want to send it to samsung and have to wait 2-4 weeks and them to come back and say its working.
Click to expand...
Click to collapse
hi
further to my post above ,
i just want to add another issue you should be aware .
Bluetooth v 4.2 (Note5 firmware ) and compatibility issues with other Bluetooth versions 3.0 ,v 4.0 v 4.1 etc ,To give you a real life example .......
On my Gear watch i use to have Bluetooth v 3.0 ( ? )
i was using my Note 3 ( at the time ).Then my Note 3 was upgraded to Bluetooth v 4.0 ,
when i started having disconnection issues .Also in Bluetooth settings on my Note3 ,device my Gear would not show up in paired devices or stick in list .
When my Gear Bluetooth firmware was upgrade to v 4.0,
i found the disconnection issues was resolved and my Gear then showed up in pair devices
I am not saying this is the issue,
but you should be aware of what Bluetooth firmware your other devices are using ...?????
Is it Bluetooth L E ( Low Energy ) version 4.2 or v 3.0, v 4.0 ,v 4.1,
good luck
Hi again
So I got the new phone yesterday and so far everything is working perfectly no connection issues with the gear s2 it has been connected via bluetooth since yesterday afternoon when I receive the new phone
danjnoble said:
Wondering if anyone else are having issues with the bluetooth on the note 5. One issue I'm having is the connection to my galaxy gear disconnects and reconnects randomly and after a few disconnects seems like the phone just ignores the gear and manual connection only works 50% of the time other times I have to reset the phone to regain connection. Other problem Im having, which I cant figure out, is my car bluetooth stereo connects with no issue to my phone but when using calling it uses the car speakers for output audio but the phones mic for input audio. Tried my S5 and the stereo works perfectly. Any suggestions? I've tried wiping caches, unpairing repairing devices. Factory reset (which worked for about a few hours but started the same issues again). I was thinking it may be software related but no software or updates were installed between the factory reset and having issues again.
Click to expand...
Click to collapse
i've got such issues after restoring Note 5. i did reset gear to the factory settings and paired devices...
Thanks for the replies. After doing some testing and what not the only thing I can figure is a bad BT module/chip in the phone. Sent it in through my service provider today. Will post results when I gets it back. Using my old S3 for now until I gets it back, its like my phone shrunk and got sugnificantly slower lol.
update for anyone who is wondering or having the same prroblems. I got my phone back from samsung today, they replaced the main board in the phone. BT seems is working good now and the phone seems snappier than before. Thanks for the help. ☺
danjnoble said:
update for anyone who is wondering or having the same prroblems. I got my phone back from samsung today, they replaced the main board in the phone. BT seems is working good now and the phone seems snappier than before. Thanks for the help.
Click to expand...
Click to collapse
How the heck did you get your phone to/from Samsung that fast? I'm about to call TMO to get a replacement device...
rojovilla said:
How the heck did you get your phone to/from Samsung that fast? I'm about to call TMO to get a replacement device...
Click to expand...
Click to collapse
I dropped it off at telus (my service provider) and they sent it in for me. only took a couple days, I was surprised it was that fast. I live in NL, Canada and everyhting is usually slow shipping here.
Dear all,
The phone work flawlessly, except for a big issue I found on bluetooth.
Once I paired it with my car bluetooth headset, when I leave the car and I get in back later, the phone didn't connect automatically; I've to connect it manually from bluetooth settings section.
Does anyone have had the same issue ?
Is there a fix for it ?
The phone is freshly installed with MIUI8.2.5 Global stable release.
Thanks anybody for supporting..
[EDIT]
After updating to stable 9.2.4 the problem is fixed.