[Help] Need a fast and bug free daily driver ROM - Android One (First-Generation) Cross-Device Genera

I'm on CM13/RR from 7-8 months now. Still facing bugs like Hotspot bug which causes apps like share-it to not work properly.
So I need a bug free and fast ROM. I'm thinking about getting back to stock ROM or flashing CM11 snapshot. What do you recommend guys?
1. CM11 Snapshot
2. Stock MM (How to?)
3. Anything else ?

Flash flume 5.1.1R beta
---------- Post added at 05:50 PM ---------- Previous post was at 05:49 PM ----------
satish111 said:
Flash flume 5.1.1R beta
Click to expand...
Click to collapse
Sorry flyme Os

sumeet240 said:
I'm on CM13/RR from 7-8 months now. Still facing bugs like Hotspot bug which causes apps like share-it to not work properly.
So I need a bug free and fast ROM. I'm thinking about getting back to stock ROM or flashing CM11 snapshot. What do you recommend guys?
1. CM11 Snapshot
2. Stock MM (How to?)
3. Anything else ?
Click to expand...
Click to collapse
STOCK MM for me HAHAHA!
It's stable AF, been using STOCK MM from a month now.
If you want customizations, just flash xposed and use modules like gravity box / AndroidN-ify.
Use a custom kernel like Zeus / TZ for better battery.
That's it.
On a note flashing Stock MM Isn't difficult, just get the zip [Look below for links, choose according to your device Ie; sprout4 / sprout8] and reboot recovery [Twrp by 1cefire Recommended] performa a full wipe [ ie; advanced wipe > wipe system/ cache /dalvik] wipe everything except SD CARD .
Once the wiping process done, go back to the TWRP menu and install STOCK Rom zip, give it some time it'll take few minutes for installation, next reboot.
If you wanna retain twrp, then make sure to uncheck 'Mount system readonly' from twrp mount settings menu.
Or just flash a custom kernel followed by super su zip, then you're good to go!
Links >
Stock MOB31E Sprout4 Rom - AFH || Mirror2 [Google_drive]
Stock MOB31E Sprout8 Rom - AFH || Mirror2 [Google_drive]
Click to expand...
Click to collapse

sumeet240 said:
I'm on CM13/RR from 7-8 months now. Still facing bugs like Hotspot bug which causes apps like share-it to not work properly.
So I need a bug free and fast ROM. I'm thinking about getting back to stock ROM or flashing CM11 snapshot. What do you recommend guys?
1. CM11 Snapshot
2. Stock MM (How to?)
3. Anything else ?
Click to expand...
Click to collapse
sachin n said:
STOCK MM for me HAHAHA!
It's stable AF, been using STOCK MM from a month now.
If you want customizations, just flash xposed and use modules like gravity box / AndroidN-ify.
Use a custom kernel like Zeus / TZ for better battery.
That's it.
On a note flashing Stock MM Isn't difficult, just get the zip [Look below for links, choose according to your device Ie; sprout4 / sprout8] and reboot recovery [Twrp by 1cefire Recommended] performa a full wipe [ ie; advanced wipe > wipe system/ cache /dalvik] wipe everything except SD CARD .
Once the wiping process done, go back to the TWRP menu and install STOCK Rom zip, give it some time it'll take few minutes for installation, next reboot.
If you wanna retain twrp, then make sure to uncheck 'Mount system readonly' from twrp mount settings menu.
Or just flash a custom kernel followed by super su zip, then you're good to go!
Links >
Click to expand...
Click to collapse
Right go for stock. I am also using it from a month now. You know bug free life. Procedure already mentioned by sachin n sir. Just download zip and flash with custom recovery. Or use sp flash tools. I however preferred twrp for flashing. And I'm waiting for miracle from Google to give us official n update notification.
P.S. Soon.

Thanks bro. I did exactly same thing. You are awesome. Do you think our device will get any further updates ?

sumeet240 said:
Thanks bro. I did exactly same thing. You are awesome. Do you think our device will get any further updates ?
Click to expand...
Click to collapse
There is no news atm.
Infact we ain't got OCTOBER patch...
Let's see..
I think Google dropped support for sprout!

sachin n said:
There is no news atm.
Infact we ain't got OCTOBER patch...
Let's see..
I think Google dropped support for sprout!
Click to expand...
Click to collapse
Condition is more worse with second gen device LAVA PIXEL V1
September patch arrived in October
GOOGLE LOVES Qualcomm

Let's hope CM14 will be better.

Resurrection Remix vs Stock ROM ?

Related

Pure Stock 4.4.3 F2FS version Flashable Zip

Hello peeps...
This is Pure Stock Image 4.4.3 from deodexed it and Converted to F2FS..​
Lets first understand,
What is F2FS?
F2FS (Flash-Friendly File System) is a flash file system created by Kim Jaegeuk at Samsung for the Linux operating system kernel. The motive for F2FS was to build a file system that from the start takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
What is All-F2FS?
We used F2FS only for /data. It was simply because we have only to flash a compatible Kernel and Format /data partition. With All-F2FS we use F2FS for all partitions and we need a compatible ROM
Instructions :
Download compatible ROM
Download FormatPartitions.zip
Download "special" TWRP for All-F2FS: openrecovery-twrp-2.7.0.0-mako-All-F2FS.img
(This is different for that of simply F2FS)
Copy FormatPartitions.zip and ROM on Phone
Flash "special" TWRP with Fastboot
Flash FormatPartitions.zip with new Recovery
Reboot Recovery
Flash ROM with new Recovery
(Flash GApps with new Recovery)
Go to Wipe Menu and press Format Data (The Big BUTTON!) (You will LOSE all your Data! Music, Movies etc!!)
Reboot
Note : If you already on F2FS directly flash the zip and then Supersu from below link
Tested it..
All working fine..
Need to flash Supersu to retain root..
Downlaods
Link : Flashable Zip Folder - All Files
or
Flashable Zip - ROM
Mirror Link :
http://goo.gl/oQL9uD
Supersu : http://download.chainfire.eu/446/SuperSU/UPDATE-SuperSU-v1.99r3.zip
Wifi Fix : Wifi Fix
F2FS 4.4.3 Kernel : d-h.st/t34
​
Credits :
@is0l4ted - creating the F2FS version
@My Nexus 4 whatsapp group members..
@Rohit02(Me)
@CallMeAldy : Wifi Fix
Changelogs : ​
2014/06/03 : Initial Release
2014/06/04 : Fixed bootoop for some users. Fix zip included in the new link. (Old link removed)
Rohit02 said:
Hello peeps...
This is Pure Stock Image 4.4.3 from deodexed it and Converted to F2FS..
@My Nexus 4 whatsapp group members..
Click to expand...
Click to collapse
There's a Nexus 4 WhatsApp group?
Sent from my Nexus 4 using XDA Free mobile app
Rohit02 said:
Hello peeps...
This is Pure Stock Image 4.4.3 from deodexed it and Converted to F2FS..
Tested it..
All working fine..
Need to flash Supersu to retain root
Click to expand...
Click to collapse
I'm on stock with root, recovery and Xposed. Can I just flash the zip and root again without lose anything?
is there a big difference in speed with F2FS? any problems??
thx
Gr8 work @is0l4ted and @Rohit02 and all the Whatsapp Group members !! Really short on time but if possible will try flashing it tomm evening !!
ronakchavan said:
There's a Nexus 4 WhatsApp group?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Hmm yes an amazing group
ttheodorou said:
is there a big difference in speed with F2FS? any problems??
thx
Click to expand...
Click to collapse
Many threads out there about f2fs its advantages and disadvantages !! Its faster in opening apps and boot times and improved io performance especially on dalvik !!
NABENDU1 said:
Many threads out there about f2fs its advantages and disadvantages !! Its faster in opening apps and boot times and improved io performance especially on dalvik !!
Click to expand...
Click to collapse
so in short it is a good upgrade for the phone. i think i will try it at some point
ok I flashed without wipe and now it's in bootloop. Uff I don't want to wipe everything
CWM ?
Is it compatible with TWRP only or can I flash it via CWM ?
Sorry Bro
gajira said:
ok I flashed without wipe and now it's in bootloop. Uff I don't want to wipe everything
Click to expand...
Click to collapse
Sorry Bro for the inconvenience.. here is the fix for your problem hope you didn't wiped again!!!
Hit Me to fix bootloop!! or Me!!
---------- Post added at 02:09 AM ---------- Previous post was at 02:03 AM ----------
spfc_jcp88 said:
Is it compatible with TWRP only or can I flash it via CWM ?
Click to expand...
Click to collapse
Only TWRP F2FS Version. To confirm that the back button on TWRP should be red in color.
is0l4ted said:
Sorry Bro for the inconvenience.. here is the fix for your problem hope you didn't wiped again!!!
Hit Me to fix bootloop!! or Me!!
---------- Post added at 02:09 AM ---------- Previous post was at 02:03 AM ----------
Only TWRP F2FS Version. To confirm that the back button on TWRP should be red in color.
Click to expand...
Click to collapse
thanks, I had a nandroid backup
Maybe that's the problem, I need a F2FS TWRP.
OP updated..
Enjoy
Can't seem to get my wifi working :/ Installer says it should be activated to view networks, but i cant activate it. If i skip the first install screen where you need to log into your google account etc, and then try to activate wifi in the settings menu nothing happens when i flip the switch :/
Did a clean install multiple times, but it just keeps on not working any fixes for this?
mumaster20 said:
Can't seem to get my wifi working :/ Installer says it should be activated to view networks, but i cant activate it. If i skip the first install screen where you need to log into your google account etc, and then try to activate wifi in the settings menu nothing happens when i flip the switch :/
Did a clean install multiple times, but it just keeps on not working any fixes for this?
Click to expand...
Click to collapse
Same here. Cannot activate wi-fi.
Can I have to install the new radio?
sychim said:
Same here. Cannot activate wi-fi.
Click to expand...
Click to collapse
flash new modem and baseband. If you change to the new android version google provides new binaries. If you haven't then maybe you're wifi won't work. Look in general section for modem baseband flashable.zip
or here:
http://forum.xda-developers.com/nexus-4/general/ref-mako-modem-collection-t2087227
carepack said:
flash new modem and baseband. If you change to the new android version google provides new binaries. If you haven't then maybe you're wifi won't work. Look in general section for modem baseband flashable.zip
or here:
http://forum.xda-developers.com/nexus-4/general/ref-mako-modem-collection-t2087227
Click to expand...
Click to collapse
Already got the new .02 baseband installed :/
To install this "special" recovery, which one of these commands is right?
Code:
fastboot flash boot filename.img
OR
Code:
fastboot flash recovery filename.img
Many thanks before...
omegahanggara said:
To install this "special" recovery, which one of these commands is right?
Code:
fastboot flash boot filename.img
OR
Code:
fastboot flash recovery filename.img
Many thanks before...
Click to expand...
Click to collapse
fastboot flash recovery filename.img
is the right way...
carepack said:
fastboot flash recovery filename.img
is the right way...
Click to expand...
Click to collapse
You're my hero.... :highfive:
omegahanggara said:
You're my hero.... :highfive:
Click to expand...
Click to collapse
no problem man

[ROM][Lollipop 5.0.1]Pure Stock LRX22C

...............................................................................................................................................................................................................................................
In response to a lot of guys for having a flashable stock image of latest android 5.0.1 for mako
...............................................................................................................................................................................................................................................
- Please flash this zip file like other regular ROMs founded in xda
- To get the flawless flash also this is recommended to use latest Recoveries ( I personally use TWRP )
- First boot will takes more than 10 minutes , so please be patient.
note:
For root access you can use " CF-Auto-Root-mako-occam-nexus4"
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Download Link:
http://www.4shared.com/zip/05o0XDYnba/occam-LRX22C.html
Feel free to make mirror
This flashable zip overwrites our custom recovery after flashed?
Coz a custom recovery (like TWRP/CWM) prevents me from using a PC,
If these zip flashes also the recovery back to stock, then we cant go back/revert back from Nandroid without a PC..
Just a simple question, but I put mu reasons why.. Heheh.
Thanks by the way for sharing the ROM..
_________________________________________________
Device: Google Nexus 4 (LG-E960) 16GB (MAKO)
ROM: SimpleAOSP-L-ROM (Stable Build 7)
Kernel: Stuxnet v4.5 (3.4.105)
Gapps: PA-Gapps-5.0.1-BETA4 (MINI)
________________________________________________
yethz said:
this flashable zip overwrites our custom recovery after flashed?
Coz a custom recovery (like twrp/cwm) prevents me from using a pc,
if these zip flashes also the recovery back to stock, then we cant go back/revert back from nandroid without a pc..
Just a simple question, but i put mu reasons why.. Heheh.
Thanks by the way for sharing the rom..
_________________________________________________
device: google nexus 4 (lg-e960) 16gb (mako)
rom: simpleaosp-l-rom (stable build 7)
kernel: stuxnet v4.5 (3.4.105)
gapps: pa-gapps-5.0.1-beta4 (mini)
________________________________________________
Click to expand...
Click to collapse
no, it does not
Can we get a different host? Its asking me to sign in through facebook/twitter/instagram etc if I want to download.
Thanks for the making it flashable though!
aidinvm_ultimate said:
no, it does not
Click to expand...
Click to collapse
I think it is necessary to remove recovery-from-boot.p from system
pincher65 said:
I think it is necessary to remove recovery-from-boot.p from system
Click to expand...
Click to collapse
this is safe to flash rom even without "recovery-from-boot" but all in all this Rom does not rewrite your current recovery
Hey, do I just need to flash this by doing a wipe data/factory reset in TWRP---Flash this zip and im good to go...Is this right?
theo28 said:
Hey, do I just need to flash this by doing a wipe data/factory reset in TWRP---Flash this zip and im good to go...Is this right?
Click to expand...
Click to collapse
Yes, as you said
aidinvm_ultimate said:
...............................................................................................................................................................................................................................................
In response to a lot of guys for having a flashable stock image of latest android 5.0.1 for mako
...............................................................................................................................................................................................................................................
- Please flash this zip file like other regular ROMs founded in xda
- To get the flawless flash also this is recommended to use latest Recoveries ( I personally use TWRP )
- First boot will takes more than 10 minutes , so please be patient.
note:
For root access you can use " CF-Auto-Root-mako-occam-nexus4"
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Download Link:
http://www.4shared.com/zip/05o0XDYnba/occam-LRX22C.html
Feel free to make mirror
Click to expand...
Click to collapse
Works exactly as mentioned and it took me about 9 minutes to reboot and maybe another 10 to do CF root. Good job!
Can I flash a custom kernel over this?
GorfDroid said:
Can I flash a custom kernel over this?
Click to expand...
Click to collapse
Yeap, you can treat It like any other rom, but for safty always do nandbackup of system before.
Hi, thank you for this ROM. Can I flash it over CM11 without factory reset? Is the radio module updated too?
i'm getting battery usage data not available when i check the battery status in notifications
Many thanks
Planning on trying the CM12 kangs. This zip will allow me go from CM12 to stock through a simple flash.
swimma said:
Hi, thank you for this ROM. Can I flash it over CM11 without factory reset? Is the radio module updated too?
Click to expand...
Click to collapse
No,there is no radio included, you have to flash it desperately
mynickname said:
Planning on trying the CM12 kangs. This zip will allow me go from CM12 to stock through a simple flash.
Click to expand...
Click to collapse
you're welcome bro
ankuzero said:
i'm getting battery usage data not available when i check the battery status in notifications
Click to expand...
Click to collapse
plz do wipe cache (or even factory reset if you come from custom rom), every thing is Ok here
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
SilentSummer said:
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
Click to expand...
Click to collapse
Strange, this is pure stock with Zero modification.... I have no such issue here and think no one niether has this! Did you flash any seperate mod?
aidinvm_ultimate said:
Strange, this is pure stock with Zero modification.... I have no such issue here and think no one niether has this! Did you flash any seperate mod?
Click to expand...
Click to collapse
I tried the other stock Lollipop floating around and had the same issue. Ended up having to pull the image directly from Google. It's good to go now.
No other mods were flashed.
SilentSummer said:
Wiped and install, however after one reboot the back/home buttons are missing and the notification bar isn't showing either.
Did a factory reset and still nothing.
Click to expand...
Click to collapse
I had the same issue.
I updated to the latest TWRP, I then factory wiped. cleaned cache, and dalvik.
Then installed this stock rom from scratch with the instructions here and it fixed the issue.
Give it another go...
I am trying to remember the exact details. But this was almost 2 weeks ago, and I might be missing a step?
Hope not...

[ROM][OFFICIAL][KPW53] Stock ROM for android one flashable zip

Hey guys!
As Google recently announced Lollipop update for Android one in upcoming weeks, Everyone want to go back to stock ROM to get the official update. SO here I present you the stock ROM flashable zip
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE!!!
Why this?
Yes, there are other ways of reverting too, but why this method?
Easy to use
No risk of IMEI erase
No additional software/drivers required
Stock recovery not required
Hastle free
How to?
Its easy. Just flash as any other custom ROM
Download the zip and place it in your sdcard
Reboot to recovery
Wipe data, cache, factory data reset
Install zip from sdcard
Navigate to zip and install
Reboot
Screenshots
Downloads and F.A.Qs in second post
Download
http://www.mediafire.com/download/k470f8wohaf0pg0/sprout_stock_KPW53.zip
F.A.Q
Will I get lollipop update?
You might get lollipop update, but mostly, you won't be able to update
Will this work on my phone?
It works on the first three Android One phones i.e. Micromax Canvas A1, Karbonn sparkle V, Spice Dream UNO Mi-498.
This is tested in Micromax Canvas A1 only, though
Is it rooted?
No. It is the full stock firmware
Do I need to install gapps?
No. The stock firmware already has Google apps
Which recovery should I use?
It is tested in Philz recovery. But TWRP and CWM should work too
Any tweaks applied?
No. Its just stock
deodexed or odexed?
I just said it is 'stock' ROM, like 3 three times now. You still ask?
can this rom be flashed over cm11 or pac rom?
drsiddique5700 said:
can this rom be flashed over cm11 or pac rom?
Click to expand...
Click to collapse
Yes just check the installation method
For ota I need stock recovery and locked BL, right?
Joyarup said:
For ota I need stock recovery and locked BL, right?
Click to expand...
Click to collapse
Right. But I'll try to make it compatible with custom recoveries too
Reply please
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Kickstan said:
I tried the method..but dat doesn't work..I am on cm 12.1..philz recovery... I turned off my phone went into recovery did all the procedure cache factory reset and all..den SD card to install zip I found my location..but when I clicked on it..it says error..why..did I miss something
Click to expand...
Click to collapse
It would be great if you can give me more details on the error. And if you are on lollipop, make sure you formated system partition before flashing
Urgent reply please
Sir..i not on lollipop..I am using cm 12.1..so I wanted to go back to stock from..so as it was written..I downloaded the zip and pasted in SD card..den u turned it off...went to philz recovery..den I searched for the file...I clicked on install new rom...den I searched the file in external SD card..den as soon as I clicked on in..something happened down the procedure and error dats all...I want to know dat I am currently using cm 12.1...by using our zip file will I go back to stock or not..as it say error...I'll send u a screen shot soon...but do reply on dis urgent thank you sir...
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Will this work on aq4502 ?
Did this actually work for anyone?
ASHU9668 said:
Many bugs in this rom....i flashed this rom successfuly by twrp recovery... and when i open playstore its couldnot be opened...its showing unfortunately stopped.. again and again after reboot...pls help me how i solve this....pls reply me fast
Click to expand...
Click to collapse
Flash this stable KPX44 version of Android 4.4.4 rom on your device, this is the last & latest Kitkat build for our devices.
Link - KPX44 Kitkat
Compatibility -
*.Sprout4 & sprout8.
Credits -
*. 1cefire
plz upload the link of karbonn sparkle v h/w v1.1 s/w kpw53

[mini-rom] deodex-apps lollipop 5.0.2 g530h xxu ~ xposed working

Deodex Apps (Only Apps) and Suport Xposed Framework
Flash this rom with custom TWRP recovery FOR LOLLIPOP -> http://forum.xda-developers.com/gra...om-recovery-twrp-2-8-7-0for-lollipop-t3190351
well make sure steps:
1. Download all files and put into SD Card
2. Reboot into recovery TWRP
3. Flash file Deodex-apps-kn06497.Zip
4. Reboot System (DO NOT WIPE) :highfive:
5. reboot to system and wait for rom to boot up, IT WILL LAST 10 MINUTES maybe more, it is normal for deodexed roms
6. Reboot into recovery and flash xposed-v65-sdk21-arm-arter97-V5-generic_1_.zip
7. This time system boots faster but apps will be updated
8. Install XposedInstaller_3.0_alpha4[1].apk and reboot
9. Open Xposed app it should say framework is connected
10. Enjoy :fingers-crossed::good:
Base Rom:
http://www.sammobile.com/firmwares/download/54517/G530HXXU2BOH5_G530HSER2BOH5_SER/
DOWNLOADS:
Deodex Apps: ->> http://d-h.st/GgUN <<-
Credits:
deodexer: http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025/page39
xposed lollipop: http://forum.xda-developers.com/xpos...lipop-t3113463
twrp recovery http://forum.xda-developers.com/gra...om-recovery-twrp-2-8-7-0for-lollipop-t3190351
dear did u flashed and checked it yourself, bcoz i checked updater script. it is not compatible with our device, it is from s5 thread. boot block in our device is 16, while in updater script it is written as 15,
can you please guide me,
i flashed it, after boot screen android apps optimizing appears, and after optimizing, samsung screen appears again, keeps on booting,
any idea?
hahmad78 said:
dear did u flashed and checked it yourself, bcoz i checked updater script. it is not compatible with our device, it is from s5 thread. boot block in our device is 16, while in updater script it is written as 15,
can you please guide me,
i flashed it, after boot screen android apps optimizing appears, and after optimizing, samsung screen appears again, keeps on booting,
any idea?
Click to expand...
Click to collapse
I have it installed and everything works fine, Xposed works wonders
kn06497 said:
I have it installed and everything works fine, Xposed works wonders
Click to expand...
Click to collapse
Worked great for me too. I'm so happy thank you
kn06497 said:
I have it installed and everything works fine, Xposed works wonders
Click to expand...
Click to collapse
Maybe i am on oh3 with baseband xcu. I tried to use ur script too with my self deodexed apps, but still same issue.
You used archi kitchen or joels app for deodexing?
Working great on 530h xxu, thank you, now I have youtube AdAway finally ?
Enviado desde Tapatalk
After flashing the deodex apps zip, I have waited more than 1 hour and my device doesn't boot up at all, it is stuck at the Samsung logo. I have flashed the base fw you mentioned with odin and the recovery successfully. I don't what I'm doing wrong.
Those ones with Xposed installed, give a try, the module "NetStrength" by Beat_Slayer..you'll not go back to std status bar icons..
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)
I think this will only work for xxu baseband devices since it (the deodex rom) worked so well in my phone (xxu) but caused bootloop on my brother's (xcu)
http://www.sammobile.com/firmwares/download/53879/G530HXCU1BOH3_G530HSER1BOH3_SER/
Hi this is base Rom for xcu device please make xcu Rom
Thanks man
Sorry for bad English?
I'm trying to deodex my brother's system with joeldroid now. I'm thinking of place the result to the system folder in the zip but still using kn06497's META-INF because I don't know how to make it. So wish me luck~
---------- Post added at 12:27 AM ---------- Previous post was at 12:17 AM ----------
Ridiw said:
I'm trying to deodex my brother's system with joeldroid now. I'm thinking of place the result to the system folder in the zip but still using kn06497's META-INF because I don't know how to make it. So wish me luck~
Click to expand...
Click to collapse
Flashed the zip and caused bootloop. Duh! :crying:
13lizzard said:
After flashing the deodex apps zip, I have waited more than 1 hour and my device doesn't boot up at all, it is stuck at the Samsung logo. I have flashed the base fw you mentioned with odin and the recovery successfully. I don't what I'm doing wrong.
Click to expand...
Click to collapse
I suffred the same
Does it require root before installing????
All you need for this to work is:
Lollipop rom already installed and rooted, of course the most important a custom recovery.
Lollipop baseband most be g530hxxu
Follow step by step from op
For my is working great, after all is done and settle, did a clear data and cache and now my phone is running very smooth and fast.
Enviado desde Tapatalk
syverman said:
All you need for this to work is:
Lollipop rom already installed and rooted, of course the most important a custom recovery.
Lollipop baseband most be g530hxxu
Follow step by step from op
For my is working great, after all is done and settle, did a clear data and cache and now my phone is running very smooth and fast.
Enviado desde Tapatalk
Click to expand...
Click to collapse
Thank you I root first then it worked well
kn06497 said:
Deodex Apps (Only Apps) and Suport Xposed Framework
Flash this rom with custom TWRP recovery FOR LOLLIPOP -> http://forum.xda-developers.com/gra...om-recovery-twrp-2-8-7-0for-lollipop-t3190351
well make sure steps:
1. Download all files and put into SD Card
2. Reboot into recovery TWRP
3. Flash file Deodex-apps-kn06497.Zip
4. Reboot System (DO NOT WIPE) :highfive:
5. reboot to system and wait for rom to boot up, IT WILL LAST 10 MINUTES maybe more, it is normal for deodexed roms
6. Reboot into recovery and flash xposed-v65-sdk21-arm-arter97-V5-generic_1_.zip
7. This time system boots faster but apps will be updated
8. Install XposedInstaller_3.0_alpha4[1].apk and reboot
9. Open Xposed app it should say framework is connected
10. Enjoy :fingers-crossed::good:
Base Rom:
http://www.sammobile.com/firmwares/download/54517/G530HXXU2BOH5_G530HSER2BOH5_SER/
DOWNLOADS:
Deodex Apps: ->> http://d-h.st/GgUN <<-
Credits:
deodexer: http://forum.xda-developers.com/galaxy-s5/general/tool-deodex-tool-android-l-t2972025/page39
xposed lollipop: http://forum.xda-developers.com/xpos...lipop-t3113463
twrp recovery http://forum.xda-developers.com/gra...om-recovery-twrp-2-8-7-0for-lollipop-t3190351
Click to expand...
Click to collapse
it work for me thanks
i have sm-g530h xxu lollipop 5.0.2
Can someone please upload the deodexed apps to MEGA? My workplace's internet have proxy in it and prevents me to download large files, fortunately, MEGA can bypass the restriction. Thanks in advance.
Sent from my SM-G900F using Tapatalk
Issue : I suffred the battery drain on Cell Stanby, the "Mobile network signal" went red all the time, does anyone face the same??
So it seems like people with XCU baseband experiences bootloop. Mine did too, if anyone could just extract the baseband and modem from XXU and upload it here, that would be great.
EDIT: Nevermind, I've already deodexed XCU's system, xposed framework works wonderful. I'll release it in the weekends, I'll just debloat it.
It's quite shocking that this phone has little love from xda, few devs and cook. I don't actually own the device, it's just my colleague's but it's not that hard to share a little love.
Working like a charm! just follow the procedure step by step!
G530H
@AnnSon thanks dude please post the deodex ver for XCU base soon TIA ☺☺☺☺

[guide] [complete]how to revert back to full stock to get android m!!

hello android one users
Waiting for android m?
Then here is the full guide to go back to full stock
and to get android m update notification (when it arrives)
and to install android marshmallow without an error
yeah I guess all android one users exploited their android one with bundles of mods/Roms/root/recoveries so now its time to change their mind coz..android marshmallow will hit android one devices from very next week..so all android one users trying to revert back to full stock lmy48m (the lastest build no.)to get android m update on their android one device...So I've decided to create this thread regarding how to go back to full stock lmy48m to receive android m,and to install it without an error.. [/]
REQUIREMENTS:-
1->Android one (of course)
2->A custom recovery must be installed(i recommended to use philz)
3->doesnt matter root is their or not but a custom recovery like philz is must and should
4->Android one 5.1 ota zip
5>Patience(coz it'll take some time)
6>relocked boot loader with android one toolkit
HOW TO REVERT BACK TO FULL STOCK:-
*.yeah if u already downloaded that ota 5.1 zip then dont worry if one who dont have that ota zip (captured) then download it from below links
*.As I already described that to use philz recovery so download it from below link
*.now make sure that u have to keep ota (5.1) zip on ur sdcard/folder and its size is 410mb approx.
*.afterall u need free some of 500mb space on ur phone at least
*.after that its going well. now move to philz recovery. I;e how to get into recovery press and hold power+volume_up button then you'll get a menu there choose recovery mode an it'll take you to philz
*.after get in to philz recovery then 1st choose wipe and format option from menu…there you'll get options like clear cache/dalvik cache/clean to install new rom.
*.after that choose clean to install new rom and wait until its popup as 'Now flash a new rom
*.If u got that popup then fell free and if u wish then clean cache/dalvik from menu also..
*.after clean wipe of ur android one device then choose>go back and choose install zip
*.then choose install from >ext.SD
*.then it'll show you a menu with folders
*.there choose in which folder you have kept the 410 mb ota zip
*.if successfully found ur ota zip then choose it...and flash it
*.so philz shows PATCHING SYSTEM IMAGE UNCONDITIONALLY for minutes
*.after few minutes (5-10minutes) u can c the zip installing with indicator
*.when indicator filled up then you will get a popup as install FROM EXT SD DONE RESULT WAS (OEM)
*.if you get that message then you're doing right.
*.after that keep in mind stock ROMs don't need any custom gapps
*.so head to home menu of philz and hit Reboot system now
*.here is the big point when u tap on reboot it'll asks to apply root on reboot U must need to choose no then automatic reboot will done
*.Patience plz...bcoz 1st boot takes some times(more than ususal)
*.after boot up setup all ur data/accounts/information etc...then goto system update and check for new it'll show's u 5.1.1 update notification then download it and install it /then you'll get another update of 5.1.1 build num.(lmy48k) and install this,again boot up after that you'll get another ota of lmy48m download and install this update also...
*.after lmy48m now you are on full stock and get ready for marshmallow
*.I guess from next week onwards we'll get m ota ...so keep rocking and wait..
*.if you get m ota then download and install that update without an error(1000xsure)
DOWNLOADS:-
1.Micromax canvas a1 ota zip is here
http://ota.googlezip.net/packages/o...20.signed-sprout-mmx-ota-1783956.d827aed7.zip
2.Karbonn sparkle v ota zip is here
http://ota.googlezip.net/packages/o...igned-sprout-karbonn-ota-1783956.7c11ac38.zip
3.Spice dream uno ota zip is here
http://ota.googlezip.net/packages/o....signed-sprout-spice-ota-1783956.4ad4c123.zip
4.Android one philz recovery and installations guide goes here
http://forum.xda-developers.com/crossdevice-dev/android-one-general/android-one-tips-tricks-t3209045
5.Android one all in one toolkit for rooting/re-locking boot loader link is here
http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165
Credits:-
rhar****, 1cefire, OTA catchers, Google, Xda
Flash at your own risk
Has anyone try it?
And It will return to stock recovery?
yeah..bro
It'll bundled with stock recovery :
Yeah..it bundle with stock recovery
I get a error while installing
Can't install this package (Thu Mar 12 03:29:18 UTC 2015) over newer build
Can u tell me which vendor phone u r using! And make sure that u have tried with philz/clean wipe required
sachin n said:
Can u tell me which vendor phone u r using! And make sure that u have tried with philz/clean wipe required
Click to expand...
Click to collapse
I use a karbonn sparkle v
I use twrp but i made a clean install
Plz...dude use philz way better ..
lzimbrea said:
I use a karbonn sparkle v
I use twrp but i made a clean install
Click to expand...
Click to collapse
As I already told u know try wid philz its worked for me and plenty of my friends... So try with philz..n feedback
sachin n said:
As I already told u know try wid philz its worked for me and plenty of my friends... So try with philz..n feedback
Click to expand...
Click to collapse
Ok I will try with philz and give you feedback later
Okie. waiting bro
lzimbrea said:
Ok I will try with philz and give you feedback later
Click to expand...
Click to collapse
Waiting bro..
Hi, any chance you could use standard font and colors in your post? Currently, it makes reading rather difficult, especially with bright colors (on xda's desktop light theme).
Thanks!
sachin n said:
Waiting bro..
Click to expand...
Click to collapse
It work with philz recovery
Thanks for this tutorial !
lzimbrea said:
Ok I will try with philz and give you feedback later
Click to expand...
Click to collapse
a.cid said:
Hi, any chance you could use standard font and colors in your post? Currently, it makes reading rather difficult, especially with bright colors (on xda's desktop light theme).
Thanks!
Click to expand...
Click to collapse
Sorry sir...I'll look in it!
lzimbrea said:
It work with philz recovery
Thanks for this tutorial !
Click to expand...
Click to collapse
It's okie..
sachin n said:
hello android one users
...waiting for android m?
Then here is the full guide to go back to full stock
and to get android m update notification (when it arrives)
and to install android marshmallow without an error
1.yeah I guess all android one users exploited their android one with bundles of mods/Roms/root/recoveries so now its time to change their mind coz..android marshmallow will hit android one devices from very next week..so all android one users trying to revert back to full stock lmy48m (the lastest build no.)to get android m update on their android one device...So I've decided to create this thread regarding how to go back to full stock lmy48m to receive android m,and to install it without an error..[/COLOR][/SIZE]
REQUIREMENTS:-
1->Android one (of course)
2->A custom recovery must be installed(i recommended to use philz)
3->doesnt matter root is their or not but a custom recovery like philz is must and should
4->Android one 5.1 ota zip
5>Patience(coz itll take some time)RLORROR]
6>relocked boot loader with android one toolkit
HOW TO REVERT BACK TO FULL STOCK
1.yeah if u already downloaded that ota 5.1 zip then dont worry if one who dont have that ota zip (captured) then download it from below links
2.As I already described that to use philz recovery so download it from below link
3.now make sure that u have to keep ota (5.1) zip on ur sdcard/folder and its size is 410mb approx.
4.afterall u need free some of 500mb space on ur phone at least
5.after that its going well now move to philz recovery.I;e/how to get into recovery press and hold power+volume_up button then you'll get a menu there choose recovery mode an it'll take u to philz
6.after get in to philz recovery then 1st choose wipe and format option from menu…there you'll get options like clear cache/dalvik cache/clean to install new rom.
7.after that choose clean to install new rom and wait until its popup as 'Now flash a new rom
8.If u got that popup then fell free and if u wish then clean cache/dalvik from menu also..
9.after clean wipe of ur android one device then choose>go back and choose install zip
10.then choose install from >ext.SD
11.then it'll show u a menu with folders
12.there choose in which folder u have keeps the 410 mb ota zip
13.if successfully found ur ota zip then choose it...and flash it
14.so philz shows PATCHING SYSTEM IMAGE UNCONDITIONALLY for minutes
15.after few minutes (5-10minutes) u can c the zip installing with indicator
16.when indicator filled up then you will get a popup as install FROM EXT SD DONE RESULT WAS (OEM)
17.if you get that message then you're doing right.
18.after that keep in mind stock ROMs don't need any custom gapps
19.so head to home menu of philz and hit Reboot system now
20.here is the big point when u tap on reboot it'll asks to apply root on reboot U must need to choose no then automatic reboot will done
21.Patience plz...bcoz 1st boot takes some times(more than ususal)
22.after boot up setup all ur data/accounts/information etc...then goto system update and check for new it'll show's u 5.1.1 update notification then download it and install it /then you'll get another update of 5.1.1 build num.(lmy48k) and install this also after boot up from lmy48k you'll get another ota of lmy48m download and install this update also...
23.after lmy48m now u r on full stock and get ready for marshmallow
24.I guess from next week onwards we'll get m ota ...so keep rocking and wait..
25.if u got m ota then download and install that update without an error(1000xsure)
DOWNLOADS
1.OTA ZIP OF MICROMAX CANVAS A1 /KARBONN SPARKLE V/SPICE DREAM UNO http://techtrickz.com/how-to/instal...1-ota-update-manually-on-android-one-devices/ head to this web and download stock 5.1 ota zip for ur android one
2.philz recovery and installations guide goes here http://googleweblight.com/?lite_url...934968&sig=APONPFkHyHioBJVe0XWdKFJ_hnsZHKsjjA
3.Android one toolkit for rooting and to relock bootloader http://googleweblight.com/?lite_url...935200&sig=APONPFlC0qeEuIimdSi8MQi7BjraGGdu2Q
Credits
1.All the android one devs. For toolkit/captured ota/and recovery
2.me(Sachin n) for creating this thread
3.my canvas a1 for helped me while creating thread by keep its juice
HIT THANKX BUTTON COZ..I'D CRAETED THIS THREAD USING LOT OF TIME AND IF U LIKED HIT THANKX
Click to expand...
Click to collapse
Yo check your thread editing
It's pretty bad
Yo..idk how it's happnd.:/ feeling bad now looking in so wait
Sent from my Micromax AQ4501 using Tapatalk
ARAVIND_PAVAN said:
Yo check your thread editing
It's pretty bad
Click to expand...
Click to collapse
now...check bro:victory:
Great Job @sachin n But as @ARAVIND_PAVAN said u should improve it to ur best

Categories

Resources