Database Develop

Galaxy Note8 SM-N9500 need help.. Please !!

Hi all,
I have my phone , it's an Galaxy Note8... was unlock already because i can use with my at&t sim card even the logo when booting on was tmobile logo...
Well here the thing: i can make phone call and texting, using with wifi is ok, but it can't use with cellular data, even i turned cellular data mode was on already! Last night i went to Settings, and do the Factory reset. After that my imei was null / no imei... So i did try restarting on and off the phone couple times luckily the imei was appeared again - but with another imei not match the imei before !?!?
It's long story makes you guys get bored right? But i just want to ask is there anyway to flash this Model to an USA region ROM? because i search google says SM-N9500 is from China ... How to flash my phone to another ROM region and avoid of losing imei again plus can using on cellular data. ( mine was not root because i don't know how to ) ... Below is my phone informations..
Please help me with your kindness and best regards for everyone reading this > :highfive:
Model number : SM-N9500
Android version : 7.0
Android security patch level: March 1, 2017
Baseband version: N9500SQU1AQC9
Kernel version:
3.18.31-10318693
[email protected]#33
Tue Oct 17 22:32:24 CST 2017
Build number : NRD90M.N9500SQU1AQC9
Custom build version: SEPF_SM_N9500_5.0.2_0008

I believe you need to get att to provision your non att mobile phone for it to be allowed to use LTE on their network.
Sent from my SM-N950U using Tapatalk

All I can say is read here and you will learn. As long as the CPU/SoC is the same you can cross-flash. I am reading more and more saying as long as its ARM based doesnt matter, but safer than sorry. Please Note BE CAREFUL (AYOR aka- BRICKing, WARRANT VOIDING, ETC), its a little advanced for beginners.
My experience has been with Galaxy S3 and Note4 & Edge variant.
ALWAYS WHEN CROSS-FLASHING, REMOVE THE MODEM FILES AND BOOT-LOADER FILES. You will have to lurk about xda to identify these files. On older Galaxy Devices could tell you from memory what the boot-loader names are. Samsung in Increasing KNOX Security has added so many partitions its not even funny, its scary!
PS: I cannot and will not help with this project.

N9500squ1aqc9
Could you do a adb system pull of your N9500SQU1AQC9 device. Im trying to port n920p with the note8 firmware. Nothing else will will port to the SM-N920P but the N9500. Im currently using the teleteam 5.2 s8/with n8 features. I want to go full note 8.
yiukiang said:
Hi all,
I have my phone , it's an Galaxy Note8... was unlock already because i can use with my at&t sim card even the logo when booting on was tmobile logo...
Well here the thing: i can make phone call and texting, using with wifi is ok, but it can't use with cellular data, even i turned cellular data mode was on already! Last night i went to Settings, and do the Factory reset. After that my imei was null / no imei... So i did try restarting on and off the phone couple times luckily the imei was appeared again - but with another imei not match the imei before !?!?
It's long story makes you guys get bored right? But i just want to ask is there anyway to flash this Model to an USA region ROM? because i search google says SM-N9500 is from China ... How to flash my phone to another ROM region and avoid of losing imei again plus can using on cellular data. ( mine was not root because i don't know how to ) ... Below is my phone informations..
Please help me with your kindness and best regards for everyone reading this > :highfive:
Model number : SM-N9500
Android version : 7.0
Android security patch level: March 1, 2017
Baseband version: N9500SQU1AQC9
Kernel version:
3.18.31-10318693
[email protected]#33
Tue Oct 17 22:32:24 CST 2017
Build number : NRD90M.N9500SQU1AQC9
Custom build version: SEPF_SM_N9500_5.0.2_0008
Click to expand...
Click to collapse

I need official rom for N920F

dear sir
after greeting
kindly I need official rom for N920F

tareg-123 said:
dear sir
after greeting
kindly I need official rom for N920F
Click to expand...
Click to collapse
There's no such model N920F existed.
I highly doubt you got refurbished note 5 with some spoofed software running on it.
Boot into download mode and check the original motherboard model. whatever model number shows in download mode SM-N920? that's your phone correct model.

Is it possible to change the Region restriction (Malaysia to US) ?

I bought this N9 from eBay, but what I didn't realize is it is based off from Malaysia Region and has a Malaysia Region Lock.
I don't live in Malaysia or its region but what's bothering is till now this device did not receive any pie beta OS update (OneUI). Am not sure if this possible but I want to get this device to US region (idk if that is the right word) so that I will get OS update whenever they release it for the US region. So there any way I can change the region restrictions without rooting and flashing a new ROM?
Device Info:
Model : SM-N960F/DS
OS Version : 8.1.0
Baseband Version: N960FXXU2ARI4
Build Number: M1AJQ.N960FXXS2ARL3
SW VER:
SAOMC_SM-960F_OXM_XME_OO_0018
XME/INS/XEU/XME

Whst csc are you on? Go to settings, about phone, software and check service provider SW ver, it's the 3 letters like XFE/XEU/PHN etc.
Sent from my SM-N960F using Tapatalk

Jostian said:
Whst csc are you on? Go to settings, about phone, software and check service provider SW ver, it's the 3 letters like XFE/XEU/PHN etc.
Sent from my SM-N960F using Tapatalk
Click to expand...
Click to collapse
HI, thanks for your time.. here is the info :
SAOMC_SM-960F_OXM_XME_OO_0018
XME/INS/XEU/XME

You can update to official Pie via post #1 and post #2 in this thread https://r.tapatalk.com/shareLink?ur...share_tid=3825204&share_fid=3793&share_type=t
Sent from my SM-N960F using Tapatalk

Jostian said:
You can update to official Pie via post #1 and post #2 in this thread https://r.tapatalk.com/shareLink?ur...share_tid=3825204&share_fid=3793&share_type=t
Sent from my SM-N960F using Tapatalk
Click to expand...
Click to collapse
While downloading the file refering to post#2, what should be the value for the region. I want it to be same as US Region. By the way I should tell you this, my phone is based on xynos processor. Will that is the same stock files for Odin..

if you just want change region for faster update, but you also know how to flash in odin, you can change csc to desired region then flash that region firmware. many thread about that in this forum.
any n960f firmware will work on any n960f, regardless of the region. idk the csc for US, but you can check this thread,
https://forum.xda-developers.com/galaxy-note-9/development/n9-oreo-8-1-usa-t-mobile-efs-csc-t3850796

/bin/ said:
While downloading the file refering to post#2, what should be the value for the region. I want it to be same as US Region. By the way I should tell you this, my phone is based on xynos processor. Will that is the same stock files for Odin..
Click to expand...
Click to collapse
Use the same one as in the example, Thant will work on your csc, yes I'm on exynos too
Sent from my SM-N960F using Tapatalk

Stock Firmware J7 Prime Indonesia With Porting New Build G610FDXU1CRL2 From XSP

STOCK FIRMWARE J7 PRIME INDONESIA
PORTING FROM XSP WITH NEW BUILD G610FDXU1CRL2 FOR XID
Disclaimer :
Your device status will return to OFFICIAL, if the device has unlocked the bootloader and install the custom ROM
I am not responsible for your device.
Before installing it! YOU choose to make this modification on your own intention, and if
You point your finger at me for messing up your device, I will laugh at you
Attention :
Secure Folder still cannot be used, if the device has unlocked the bootloader and install the custom ROM
Knox remains disconnected, if the device has unlocked the bootloader and install the custom ROM
Download
Here
Installation :
1. Download Odin 3.13.3 here
2. Extract the firmware file you just downloaded
3. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
4. Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data
5. Reboot your phone in Download / Odin mode:
POWER + VOLUME DOWN + HOME BUTTON
6. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
7. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot
8. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC
Please Hit Thanks If You Like My Effort​
XDA:DevDB Information
XIDG610FDXU1CRL2, ROM for the Samsung Galaxy J7
Contributors
CuckooVG
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: -
Based On: XSP to XID
Version Information
Status: Stable
Current Stable Version: 9.5
Stable Release Date: 2019-04-27
Beta Release Date: 2019-03-30
Created 2019-04-26
Last Updated 2019-04-27

Reserved

Reserved

Screenshoot
https://1drv.ms/f/s!AiMyiGTC5JqA1l5C2L1JkC0vIS2q

is the model number g610f/ds? same as mine. i have indo stock rom

jusipism said:
is the model number g610f/ds? same as mine. i have indo stock rom
Click to expand...
Click to collapse
ya, note also the build number, if it starts with g610fdxu then your device can install this firmware
You can see screenshot above

CuckooVG said:
ya, note also the build number, if it starts with g610fdxu then your device can install this firmware
You can see screenshot above
Click to expand...
Click to collapse
thank you sir! downloading now

Is this the latest firmware from Sammobile?

Mosh Edd said:
Is this the latest firmware from Sammobile?
Click to expand...
Click to collapse
XSP yes

CuckooVG said:
https://1drv.ms/f/s!AiMyiGTC5JqA1l5C2L1JkC0vIS2q
Click to expand...
Click to collapse
where to find volLET sir?

jusipism said:
where to find volLET sir?
Click to expand...
Click to collapse
Settings, connection, network cell, and u can see VoLTE

CuckooVG said:
Settings, connection, network cell, and u can see VoLTE
Click to expand...
Click to collapse
i dont have it. i only have settings, connection, mobile network= lte/3g/2g sir

jusipism said:
i dont have it. i only have settings, connection, mobile network= lte/3g/2g sir
Click to expand...
Click to collapse
Pls check ur provider, and where u buy ur j7 prime?

CuckooVG said:
Pls check ur provider, and where u buy ur j7 prime?
Click to expand...
Click to collapse
actually my brother in law bought this in saudi but the firmware is india, its confusing me though

Sorry
jusipism said:
actually my brother in law bought this in saudi but the firmware is india, its confusing me though
Click to expand...
Click to collapse
Please read before act. This is only for Indonesia

CuckooVG said:
Please read before act. This is only for Indonesia
Click to expand...
Click to collapse
its okay sir. still f/ds though.. thanks for your work ^_^

jusipism said:
its okay sir. still f/ds though.. thanks for your work ^_^
Click to expand...
Click to collapse
I can help you to make your device's specific firmware, which country are you in? and is it true that your device is an Indian device? then make sure you use a provider that supports VoLTE, I try to make firmware for your device

Im from Philippines, but Philippines dont have f/ds because Philippine Firmware is only for Y variant. I really dont know because my Brother in law just give me this although the phone came from Saudi but when i format it, the first language that i facing before i start to configure it is India's language. I hope you understand me. Im really poor in speaking english

jusipism said:
Im from Philippines, but Philippines dont have f/ds because Philippine Firmware is only for Y variant. I really dont know because my Brother in law just give me this although the phone came from Saudi but when i format it, the first language that i facing before i start to configure it is India's language. I hope you understand me. Im really poor in speaking english
Click to expand...
Click to collapse
I think you should look at the box to find out where the device is produced

CuckooVG said:
I think you should look at the box to find out where the device is produced
Click to expand...
Click to collapse
Only the device has been given to me

Is it possible toFlash stock rom on At&t note 9

I am having an unlocked at&t note 9. I didn't get any one ui updates till now . Is it possible to flash stock rom on the device and will i get the updates through ota.

Sanjaysnjy said:
I am having an unlocked at&t note 9. I didn't get any one ui updates till now . Is it possible to flash stock rom on the device and will i get the updates through ota.
Click to expand...
Click to collapse
you are already on stock. and you just received an ota, if you meant what you wrote.

The phone is on at&t firmware right . I need to change this to stock firmware

Sanjaysnjy said:
The phone is on at&t firmware right . I need to change this to stock firmware
Click to expand...
Click to collapse
If you mean you want to change N960A to N960F, the short answer is no.
Among other major differences, one is Snapdragon while the other is Exynos.

usju said:
If you mean you want to change N960A to N960F, the short answer is no.
Among other major differences, one is Snapdragon while the other is Exynos.
Click to expand...
Click to collapse
n960A is a phone?

I just keep coming here to see what OP says next..[emoji23]
Sent from my SM-N960U using Tapatalk

so here's the solution:
it involves searching and reading.
download the latest att firmware for your device.
you can use web sites or sam firm tool 0.3.6 to retrieve the correct firmware file that matches your device.
extrac zip and flash all components, put your device in downlaod mode and flash using odin 3.13.1 or 3.13.3 application. you will need samsung android drivers installed prior.
now the search and reading part comes here.

This is why I have spent less time on XDA. Someone comes in with a question and is ridiculed. Some members are so full of themselves. I'm a long time member and it's gets worse every day. SMH

N960USQS1ARI5 this is my baseband version.

Sanjaysnjy said:
I am having an unlocked at&t note 9. I didn't get any one ui updates till now . Is it possible to flash stock rom on the device and will i get the updates through ota.
Click to expand...
Click to collapse
You're basically asking can you flash your AT&T variant to the Unlocked/Bloatfree version, right?

Yes.And the phone is unlocked.

I can't upload the screenshot it says bad request

These are the software information
Android version
8.1.0
Samsung Experience version
9.5
Baseband version
N960USQS1ARI5
Kernel version
4.9.65-14091849 (gcc version 4.9.x 20150123 (prerelease) (GCC) )
[email protected] #1
Tue Sep 11 13:01:21 KST 2018
Build number
M1AJQ.N960USQS1ARI5
Security Enhancements for Android status
Enforcing
SEPF_SM-N960U_8.1.0_0004
Tue Sep 11 13:07:50 2018
Knox version
Knox 3.2
Knox API level 26
TIMA 4.1.0
Service provider SW ver.
SAOMC_SM-N960U_OYN_ATT_OO_0033
28f114a5fb3f7ece
ATT/ATT/ATT