Hi all,
I have my phone , it's an Galaxy Note8... was unlock already because i can use with my at&t sim card even the logo when booting on was tmobile logo...
Well here the thing: i can make phone call and texting, using with wifi is ok, but it can't use with cellular data, even i turned cellular data mode was on already! Last night i went to Settings, and do the Factory reset. After that my imei was null / no imei... So i did try restarting on and off the phone couple times luckily the imei was appeared again - but with another imei not match the imei before !?!?
It's long story makes you guys get bored right? But i just want to ask is there anyway to flash this Model to an USA region ROM? because i search google says SM-N9500 is from China ... How to flash my phone to another ROM region and avoid of losing imei again plus can using on cellular data. ( mine was not root because i don't know how to ) ... Below is my phone informations..
Please help me with your kindness and best regards for everyone reading this > :highfive:
Model number : SM-N9500
Android version : 7.0
Android security patch level: March 1, 2017
Baseband version: N9500SQU1AQC9
Kernel version:
3.18.31-10318693
[email protected]#33
Tue Oct 17 22:32:24 CST 2017
Build number : NRD90M.N9500SQU1AQC9
Custom build version: SEPF_SM_N9500_5.0.2_0008
I believe you need to get att to provision your non att mobile phone for it to be allowed to use LTE on their network.
Sent from my SM-N950U using Tapatalk
All I can say is read here and you will learn. As long as the CPU/SoC is the same you can cross-flash. I am reading more and more saying as long as its ARM based doesnt matter, but safer than sorry. Please Note BE CAREFUL (AYOR aka- BRICKing, WARRANT VOIDING, ETC), its a little advanced for beginners.
My experience has been with Galaxy S3 and Note4 & Edge variant.
ALWAYS WHEN CROSS-FLASHING, REMOVE THE MODEM FILES AND BOOT-LOADER FILES. You will have to lurk about xda to identify these files. On older Galaxy Devices could tell you from memory what the boot-loader names are. Samsung in Increasing KNOX Security has added so many partitions its not even funny, its scary!
PS: I cannot and will not help with this project.
N9500squ1aqc9
Could you do a adb system pull of your N9500SQU1AQC9 device. Im trying to port n920p with the note8 firmware. Nothing else will will port to the SM-N920P but the N9500. Im currently using the teleteam 5.2 s8/with n8 features. I want to go full note 8.
yiukiang said:
Hi all,
I have my phone , it's an Galaxy Note8... was unlock already because i can use with my at&t sim card even the logo when booting on was tmobile logo...
Well here the thing: i can make phone call and texting, using with wifi is ok, but it can't use with cellular data, even i turned cellular data mode was on already! Last night i went to Settings, and do the Factory reset. After that my imei was null / no imei... So i did try restarting on and off the phone couple times luckily the imei was appeared again - but with another imei not match the imei before !?!?
It's long story makes you guys get bored right? But i just want to ask is there anyway to flash this Model to an USA region ROM? because i search google says SM-N9500 is from China ... How to flash my phone to another ROM region and avoid of losing imei again plus can using on cellular data. ( mine was not root because i don't know how to ) ... Below is my phone informations..
Please help me with your kindness and best regards for everyone reading this > :highfive:
Model number : SM-N9500
Android version : 7.0
Android security patch level: March 1, 2017
Baseband version: N9500SQU1AQC9
Kernel version:
3.18.31-10318693
[email protected]#33
Tue Oct 17 22:32:24 CST 2017
Build number : NRD90M.N9500SQU1AQC9
Custom build version: SEPF_SM_N9500_5.0.2_0008
Click to expand...
Click to collapse
Related
Just bought my Note 5 yesterday, International version, when I try to update the software, I get "Software Update - Registration Failed" WiFi signal is very strong and no data connection.. any help please?!!!
mohmd.nagy said:
Just bought my Note 5 yesterday, International version, when I try to update the software, I get "Software Update - Registration Failed" WiFi signal is very strong and no data connection.. any help please?!!!
Click to expand...
Click to collapse
Is it new or used?
Uzair40 said:
Is it new or used?
Click to expand...
Click to collapse
It's New
Just noticed something from pictures you provide
TA: all the numbers are 0
There is my 920c picture
I think something not right on your device
The problem has been solved by enabling Mobile Data, once enabled it, the device got registered and downloaded the update
1980aksoy said:
Just noticed something from pictures you provide
TA: all the numbers are 0
There is my 920c picture
I think something not right on your device
Click to expand...
Click to collapse
it became same like yours once I updated it, thank you for your kind reply
I bought Galaxy A500F , I try to update the software, I get "Software Update - Process Failed" is there any solution.
Dear same here all 00000 what I can do
I have the same problem. I enabled mobile data, but nothing changed. Registration failed again. Is there any other solution?
Mikkie86 said:
I have the same problem. I enabled mobile data, but nothing changed. Registration failed again. Is there any other solution?
Click to expand...
Click to collapse
Well I just noticed on the first guys post that his baseband and build numbers don't match and they should.. Do you have pictures of the front of your phone that I can see and the baseband and build number information?
MrMike2182 said:
Well I just noticed on the first guys post that his baseband and build numbers don't match and they should.. Do you have pictures of the front of your phone that I can see and the baseband and build number information?
Click to expand...
Click to collapse
Thanks for answering.
I just made some screenshots. How can I upload them here?
Or, I can type the information...
About device:
Model number
SM-J710GN
United Arab Emirates
TRA ID : 0016333/08
TA : 00000000/00
Software info:
Android version
6.0.1
Baseband version
J710GNDXU1API1
Kernel version
3.18.14-9239254
[email protected] #1
Fri Sep 23 19:08:49 KST 2016
Build Number
MMB29K.J710GNDXU1API5
SE for Android status
Enforcing
SEPF_SECMOBILE_6.0.1_0027
Fri Sep 23 19:23:55 2016
Security software version
ASKS v1.1_160901
KNOX version
KNOX 2.6
Standard SDK 5.6.0
Premium SDK 2.6.0
Customization SDK 2.6.0
Container 2.6.0
CEP 2.0.1
Enterprise Billing 1.2.0
OTP 2.6.0
SE for Android 2.4.0
SSO 2.5.0
Shared Devices 2.6.0
TIMA 3.2.007
VPN 2.2.4
Android Security patch level
September 1, 2016
Mikkie86 said:
Thanks for answering.
I just made some screenshots. How can I upload them here?
Or, I can type the information...
About device:
Model number
SM-J710GN
United Arab Emirates
TRA ID : 0016333/08
TA : 00000000/00
Software info:
Android version
6.0.1
Baseband version
J710GNDXU1API1
Kernel version
3.18.14-9239254
[email protected] #1
Fri Sep 23 19:08:49 KST 2016
Build Number
MMB29K.J710GNDXU1API5
SE for Android status
Enforcing
SEPF_SECMOBILE_6.0.1_0027
Fri Sep 23 19:23:55 2016
Security software version
ASKS v1.1_160901
KNOX version
KNOX 2.6
Standard SDK 5.6.0
Premium SDK 2.6.0
Customization SDK 2.6.0
Container 2.6.0
CEP 2.0.1
Enterprise Billing 1.2.0
OTP 2.6.0
SE for Android 2.4.0
SSO 2.5.0
Shared Devices 2.6.0
TIMA 3.2.007
VPN 2.2.4
Android Security patch level
September 1, 2016
Click to expand...
Click to collapse
Before you enabled Mobile Data.. Did you set the APN settings correctly? APN is the Access Point Names for the specific carrier you are with.
This link will help you with the Access Point Names.
http://www.thecellguide.com/samsungn5howtoapn.php
I'm starting to think you got ripped off... Where you trying to buy a Samsung Galaxy Note 5? Or a Samsung Galaxy J7?? I hate to tell you this if you wanted a Samsung Galaxy Note you didn't get it and you were sold a Samsung Galaxy J7 which is why you couldn't find the unlock codes because Verizon doesn't sim card lock their devices anymore and if I was you and you know who you bought that J7 from, I'd pay them a visit!! I shudder to know what you paid for that Galaxy J7 because a Samsung Galaxy Note 5 a REAL one like mine 64GB cost me 800.00 USD and that Samsung Galaxy J7 isn't even worth 200.00 USD... What did they charge you for the phones price to buy it??
MrMike2182 said:
Well I just noticed on the first guys post that his baseband and build numbers don't match and they should.. Do you have pictures of the front of your phone that I can see and the baseband and build number information?
Click to expand...
Click to collapse
MrMike2182 said:
Before you enabled Mobile Data.. Did you set the APN settings correctly? APN is the Access Point Names for the specific carrier you are with.
This link will help you with the Access Point Names.
I'm starting to think you got ripped off... Where you trying to buy a Samsung Galaxy Note 5? Or a Samsung Galaxy J7?? I hate to tell you this if you wanted a Samsung Galaxy Note you didn't get it and you were sold a Samsung Galaxy J7 which is why you couldn't find the unlock codes because Verizon doesn't sim card lock their devices anymore and if I was you and you know who you bought that J7 from, I'd pay them a visit!! I shudder to know what you paid for that Galaxy J7 because a Samsung Galaxy Note 5 a REAL one like mine 64GB cost me 800.00 USD and that Samsung Galaxy J7 isn't even worth 200.00 USD... What did they charge you for the phones price to buy it??
Click to expand...
Click to collapse
I have received configuration messages from my mobile carrier when I inserted SIM card, and I and installed them (the carrier is MTS, from Serbia). Yes, I wanted to buy Samsung Galaxy J710 Dual SIM. Both SIM slots are unlocked. I tried turning Wifi off and just mobile data on... Nothing changed... Same error again.
I just realized that this topic is for Galaxy Note 5 phones... Sorry about that. This is the only place I found mentioning anything about "Software Update - Registration Failed" problem...
Mikkie86 said:
I have received configuration messages from my mobile carrier when I inserted SIM card, and I and installed them (the carrier is MTS, from Serbia). Yes, I wanted to buy Samsung Galaxy J710 Dual SIM. Both SIM slots are unlocked. I tried turning Wifi off and just mobile data on... Nothing changed... Same error again.
I just realized that this topic is for Galaxy Note 5 phones... Sorry about that. This is the only place I found mentioning anything about "Software Update - Registration Failed" problem...
Click to expand...
Click to collapse
All I can suggest is to install updated firmware for the J7 using Odin and then put a sim card in and set the APN settings correctly then see if it works and if it doesn't you'll have to go to the place that you buy your Internet from and have them set it up..
MrMike2182 said:
All I can suggest is to install updated firmware for the J7 using Odin and then put a sim card in and set the APN settings correctly then see if it works and if it doesn't you'll have to go to the place that you buy your Internet from and have them set it up..
Click to expand...
Click to collapse
Is it possible that wrong CSC code caused software update registration to fail?
I lost my whole day reading about it. It is set to XSG (United Arab Emirates, I think).
Also, I was supprised when I found out that KNOX Warranty Void is 0x1. I never rooted this phone, nor install anything outside Google play. I also found information that my native language interface was installed on 27th December 2016. Is it possible that this broke KNOX? Could it be the proof that someone did something that is preventing device to update?
Mikkie86 said:
Is it possible that wrong CSC code caused software update registration to fail?
I lost my whole day reading about it. It is set to XSG (United Arab Emirates, I think).
Also, I was supprised when I found out that KNOX Warranty Void is 0x1. I never rooted this phone, nor install anything outside Google play. I also found information that my native language interface was installed on 27th December 2016. Is it possible that this broke KNOX? Could it be the proof that someone did something that is preventing device to update?
Click to expand...
Click to collapse
Yes thats all possible since knox is tripped.. Once knox gets tripped it usually causes the phone a lot of problems.. And no installation of a language cannot trip knox the only thing that could tripped knox was because someone rooted it before you got it.. And if it has an incorrect CSC yeah that will mess with any updates... If you want to at least get that phone up and running again I'd suggest you may as well reroot it again and install your own kernel and rom that you can find on the net.. There's usually a few good roms and kernels out nowadays that run great and a lot of times even better than the stock rom.. Are you sure you didn't buy a fake phone?? What does CPU Z from the play store say about the information on your phone? Like the bootloader information the CPU the amount of memory and even the amount of space.. I need to know so I can check against a real one.
Mikkie86 said:
Is it possible that wrong CSC code caused software update registration to fail?
I lost my whole day reading about it. It is set to XSG (United Arab Emirates, I think).
Also, I was supprised when I found out that KNOX Warranty Void is 0x1. I never rooted this phone, nor install anything outside Google play. I also found information that my native language interface was installed on 27th December 2016. Is it possible that this broke KNOX? Could it be the proof that someone did something that is preventing device to update?
Click to expand...
Click to collapse
Hi Mikkie86, I just bought an International Note 5 and having the same issue. It's XSG and Knox is 0x1. Also it doesn't even try to look up software updates, it says Process Failed. Have you got any solution with that?
The place I've bought is doesn't accept returns, I'm so mad right now. They also didn't inform me about the device is Note 5 Duos. I figured it out as I was putting my sim card in it.
Samsung software update processing failed
I bought Galaxy j7 2016 , I try to update the software, I get "Software Update - Process Failed" is there any solution.
its not registering my device for update
same problem I'm facing with my note3 neo
it came from UAE
and I'm unable to update its software..its still jelly bean :-/
any solution plz?
hmzimughal said:
same problem I'm facing with my note3 neo
it came from UAE
and I'm unable to update its software..its still jelly bean :-/
any solution plz?
Click to expand...
Click to collapse
As per your identical post you are not in the NEO forum .
Greetings all,
Hope you are doing well. I have bought a Galaxy Note 5 with the model SM-N920F. Unfortunately, the phone keeps rebooting from time to time. Searching through internet, all people were suggesting to reflash the ROM.
The problem is, where to get an original ROM for SM-N920F.
Thank you for your support,
WindGhost said:
Greetings all,
Hope you are doing well. I have bought a Galaxy Note 5 with the model SM-N920F. Unfortunately, the phone keeps rebooting from time to time. Searching through internet, all people were suggesting to reflash the ROM.
The problem is, where to get an original ROM for SM-N920F.
Thank you for your support,
Click to expand...
Click to collapse
Google Sammobile and use the search to find the firmware for your device.
RazorMC said:
Google Sammobile and use the search to find the firmware for your device.
Click to expand...
Click to collapse
For that particular model I didn't find (SM-N920F)
P.S: Checking my IMEI number, it gave me that the model is SM-N920T, how to understand that?
WindGhost said:
For that particular model I didn't find (SM-N920F)
P.S: Checking my IMEI number, it gave me that the model is SM-N920T, how to understand that?
Click to expand...
Click to collapse
Go to download mode and check which version it is.
F is Europe and T is T-mobile, both have different bases.
RazorMC said:
Go to download mode and check which version it is.
F is Europe and T is T-mobile, both have different bases.
Click to expand...
Click to collapse
Now this is very funny:
Code:
PRODUCT NAME: SM-N920P
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAP LOCK: OFF
According to IMEI it is T-Mobile, now from download mode it shows the P version which is Spint.
Does that mean I can flash any ROM from the following: http://www.sammobile.com/firmwares/database/SM-N920P/SPR/
WindGhost said:
Now this is very funny:
Code:
PRODUCT NAME: SM-N920P
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAP LOCK: OFF
According to IMEI it is T-Mobile, now from download mode it shows the P version which is Spint.
Does that mean I can flash any ROM from the following: http://www.sammobile.com/firmwares/database/SM-N920P/SPR/
Click to expand...
Click to collapse
Before flashing, kindly check Swappa for the device variant.
The device could be blacklisted by either of the carriers and you'd get stuck with the wrong firmware.
If you still want to go ahead, then try flashing the stock 920P firmware but there is a chance that the device might get bricked due to incorrect firmware since your device has 3 different models.
Check with carriers first to verify the device and its exact model.
RazorMC said:
Before flashing, kindly check Swappa for the device variant.
The device could be blacklisted by either of the carriers and you'd get stuck with the wrong firmware.
If you still want to go ahead, then try flashing the stock 920P firmware but there is a chance that the device might get bricked due to incorrect firmware since your device has 3 different models.
Check with carriers first to verify the device and its exact model.
Click to expand...
Click to collapse
I didn't find any match for the device on Swappa.
Anyway, to make everything clear, from about the device menu:
Code:
Software version: N920FXXU1AOGD
Model number: SM-N920F
Android version: 5.1.1
Baseband version: N920FXXU1AOGD
Kernel version: 3.10.61-Noble-Kerenel-v1.0
[email protected] #1
Thu Aug 27 08:46:39 ICT 2015
Build number: LMY47X.N920FXXU1AOGD
From the download menu as I mentioned before:
Code:
PRODUCT NAME: SM-N920P
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAP LOCK: OFF
Using IMEI showing that the device is not blacklisted or stolen.
Regards,
WindGhost said:
I didn't find any match for the device on Swappa.
Anyway, to make everything clear, from about the device menu:
Code:
Software version: N920FXXU1AOGD
Model number: SM-N920F
Android version: 5.1.1
Baseband version: N920FXXU1AOGD
Kernel version: 3.10.61-Noble-Kerenel-v1.0
[email protected] #1
Thu Aug 27 08:46:39 ICT 2015
Build number: LMY47X.N920FXXU1AOGD
From the download menu as I mentioned before:
Code:
PRODUCT NAME: SM-N920P
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FAP LOCK: OFF
Using IMEI showing that the device is not blacklisted or stolen.
Regards,
Click to expand...
Click to collapse
Then the stock 920P firmware is a better option for Odin since this relates to the model mentioned in download mode.
The one mentioned in settings could have been modified.
RazorMC said:
Then the stock 920P firmware is a better option for Odin since this relates to the model mentioned in download mode.
The one mentioned in settings could have been modified.
Click to expand...
Click to collapse
So, I had flashed the SM-N920P ROM. It is working very well with me.
The only issue is I am not able to use LTE.
Maybe, I can try to flash SM-N920C?!
WindGhost said:
So, I had flashed the SM-N920P ROM. It is working very well with me.
The only issue is I am not able to use LTE.
Maybe, I can try to flash SM-N920C?!
Click to expand...
Click to collapse
did u try sm-n920p in sm-n920f ... is it working fine with u ? can u plz share screen shots of ur note 5 ?
Note 5 F
WindGhost said:
So, I had flashed the SM-N920P ROM. It is working very well with me.
The only issue is I am not able to use LTE.
Maybe, I can try to flash SM-N920C?!
Click to expand...
Click to collapse
Hello WindGhost did you solve this problem ? I have also a NOTE 5 F , still with 5.01 , and no official 6.0.1 around
But for me already the LTE isn't working perfect , i have 2 note 5 the other is a 9208 with have 6.0.1 and there the LTE ( or 4G ) is twice as fast as this F version ...
Also in android stated a F version and in BOOTLOADER a N920P.
Pls advice greetings.
If what you have is a N920P then you don't have LTE. N920P has HSPDA+ only.
I've got white N920F with bootloader N920PVPS3BPJ2. It seems it is really an unlocked sprint N920P. Cause despite having 4G icon in statusbar I see only HSPA in mobile network status. Thanks for pointing out this difference, now I'm more concerned about this.
Hello please can anyone help me update my note 5 sm-n920f to nougat
Ebenezerbaffoe said:
Hello please can anyone help me update my note 5 sm-n920f to nougat
Click to expand...
Click to collapse
Have you got solution?
where to get an original ROM for SM-N920F ?
Hello,
I have smn920f, but i think the original version is smn920K. Can i update via odin with smn920k firmware?? Will my phone get error after update? Please help
Thank you
Note 5 sm-n920f => Android 7 firmware ?
Hi all,
I have note 5 sm-n920f (sm-n920p unlocked version), having firmware Android 6 .0.1/MMB29K/N920PVPS3BQB1 which working perfectly daily. How can I ugprade to latest NOTE 5 android 7 stock rom maybe sm-n920c (possible) anyone tried ?
Using Odin, download from sammobile.com latest firmware note5 stock ROM android 7 of sm-n920c etc
many thanks, looking forward for anyone reply.
James
couldnt find firmwire for sm n920f instead i downloaded sm920k,pls will it work......pls i need help
efoyaw said:
couldnt find firmwire for sm n920f instead i downloaded sm920k,pls will it work......pls i need help
Click to expand...
Click to collapse
there is no N920F. Note5 was not released in Europe..... these are the variants a, c, g, i, k, l, p, s, t, v, r4 and 9208.
a, p, r4, t and v is for U.S. carriers.
k,l and s for Korea
c (middle east), g (latin america and india), i (australia and pacific) and 9208 (dual sim) for international
Hello folks,
I haev bought an Axon M during my last trip in China and coz there was just english and chinese and also some crucial Apps were missing, I have flashed it with 7.1.2 firmware from Vodafone Spain. Flashing worked perfectly. After switching it on, it has got all a features an Android phone needs.....full language packs and all useful Apps. WIFI and Bluetooth are working great. The main problem is, that it does not receive GSM or 3G or 4G signals. I cannot even make an emergency call without a SIM card. Once attempting an emergeny call, the phone is responding after 10secs. "please switch off flight mode".
The problem is, "flight mode" is off, coz nobody has ever switched it on. Therefore I am facing a big mess now. Trying to reflash the original chinese firmware back to the phone has failed, coz the phone says "cannot flash this version" I guess coz the chinese firmware is older than the 7.1.2 spanish firmware and downgrading is not accepted in regular flashing mode. It seems the Axon M hardware from Vodafone Spain is not fully compatible with the Chinese Hardware Version - may be due to a different RAM memory size or other issues I don`t know.
I am a bloddy rookie in Android and I urgently seek help in my desperate situation. I am in Germany and the so called "ZTE service" overhere is rotten and does not want to help.
IHere all datas of my ZTE AXON M:
Model No.: Z999
Android Version 7.1.2
Android Security Patch Level: 5. Jan 2018
Baseband Version: P996A20B01
Kernel Version: 3.18.31-perf-g14adf9e-00895-gc9e03f7 / [email protected]
Build Version: AXONMB01-ES_MR00a
Hardware Version: ZTE AXON M T2
I can spend some tip for the saviour.
Thx for every idea.
wolfhuhn said:
Hello folks,
I haev bought an Axon M during my last trip in China and coz there was just english and chinese and also some crucial Apps were missing, I have flashed it with 7.1.2 firmware from Vodafone Spain. Flashing worked perfectly. After switching it on, it has got all a features an Android phone needs.....full language packs and all useful Apps. WIFI and Bluetooth are working great. The main problem is, that it does not receive GSM or 3G or 4G signals. I cannot even make an emergency call without a SIM card. Once attempting an emergeny call, the phone is responding after 10secs. "please switch off flight mode".
The problem is, "flight mode" is off, coz nobody has ever switched it on. Therefore I am facing a big mess now. Trying to reflash the original chinese firmware back to the phone has failed, coz the phone says "cannot flash this version" I guess coz the chinese firmware is older than the 7.1.2 spanish firmware and downgrading is not accepted in regular flashing mode. It seems the Axon M hardware from Vodafone Spain is not fully compatible with the Chinese Hardware Version - may be due to a different RAM memory size or other issues I don`t know.
I am a bloddy rookie in Android and I urgently seek help in my desperate situation. I am in Germany and the so called "ZTE service" overhere is rotten and does not want to help.
IHere all datas of my ZTE AXON M:
Model No.: Z999
Android Version 7.1.2
Android Security Patch Level: 5. Jan 2018
Baseband Version: P996A20B01
Kernel Version: 3.18.31-perf-g14adf9e-00895-gc9e03f7 / [email protected]
Build Version: AXONMB01-ES_MR00a
Hardware Version: ZTE AXON M T2
I can spend some tip for the saviour.
Thx for every idea.
Click to expand...
Click to collapse
Hi,
I guess the baseband firmware is not compatible with the chinese version because the spanish version has slightly different frequency bands. If you are able to reflash only the chinese baseband version. It might work again.
Droggi87 said:
Hi,
I guess the baseband firmware is not compatible with the chinese version because the spanish version has slightly different frequency bands. If you are able to reflash only the chinese baseband version. It might work again.
Click to expand...
Click to collapse
Thx for ur fast answer, but it does not help once u cannot tell me where to get the chinese base band version and which software I need to flash it into the phone. Please specify detailed.
Cheers Wolfi
wolfhuhn said:
Thx for ur fast answer, but it does not help once u cannot tell me where to get the chinese base band version and which software I need to flash it into the phone. Please specify detailed.
Cheers Wolfi
Click to expand...
Click to collapse
There's a new firmware Update out now for the chinese version. If you find a download, you may can flash it back to cn version now.
The update feels quite smooth but in the current version google play does not work properly what makes every google app more or less useless.
Please I need to run play store in my phone any help ??
I've tried many things from cf auto root odin file and
the method on here and nothing seems to work. anybody have a concrete way to root a Verizon SM-G950U ?
JETROD_ said:
I've tried many things from cf auto root odin file and
the method on here and nothing seems to work. anybody have a concrete way to root a Verizon SM-G950U ?
Click to expand...
Click to collapse
Cf auto root only works on unlocked boot loader devices. There is a guide in the main site threads for installing safestrap then rooted system images
Do you mean xda?, or cf, site
JETROD_ said:
Do you mean xda?, or cf, site
Click to expand...
Click to collapse
Ahh sorry mate missed your post. The cqrrier specific threads here on s8 and up are pretty much dead. Yeah the safestrap and junk is all here on xda. Cf technicly is made for us yes. But because we have a locked bl it wont work. But if we where say to unlock it tomorrow yes cf auto would work perfectly in therory..if you search xda and s8 no verizon youll be taken. Screw it here https://forum.xda-developers.com/galaxy-s8
The s8 is not like past devices. All U.S. models are identicle so any 950u thread can or will apply to you as well. Xda has a wonderful search bar at the top of each page and it actually works really good once you get to know it.
I'm coming late to the party so to speak.
I finally got a S8 (Verizon) but have yet to move over to it.
My current phone is an S7 (Verizon) and via this website I was able to use a "non-customized" firmware ROM files along with odin3.12 to flash my S7. I did that so that I could use the "moblie hotspot" feature and give wifi to my laptop as I have unlimited data on my phone.
My S7 is "stuck" on Android 7, July 1, 2017 security patch, G930UUES4QG1 which I have been fine with not getting any verizon updates so long as I can use the "moblie hotspot".
Are you saying that with the S8 it is **NOT** possible to do what I did with the S7?
Here is the info on my S8
Model: SM-G950U
Carrier: Verizon
Android Version: 8.0.0
Baseband: G950USQS5CSB1
Kernel: 4.4.78
Build: R16NW.G950USQS5CSB1
Android Security Patch: FEB 01, 2019
Bro if u found then tell me.
I am having an unlocked at&t note 9. I didn't get any one ui updates till now . Is it possible to flash stock rom on the device and will i get the updates through ota.
Sanjaysnjy said:
I am having an unlocked at&t note 9. I didn't get any one ui updates till now . Is it possible to flash stock rom on the device and will i get the updates through ota.
Click to expand...
Click to collapse
you are already on stock. and you just received an ota, if you meant what you wrote.
The phone is on at&t firmware right . I need to change this to stock firmware
Sanjaysnjy said:
The phone is on at&t firmware right . I need to change this to stock firmware
Click to expand...
Click to collapse
If you mean you want to change N960A to N960F, the short answer is no.
Among other major differences, one is Snapdragon while the other is Exynos.
usju said:
If you mean you want to change N960A to N960F, the short answer is no.
Among other major differences, one is Snapdragon while the other is Exynos.
Click to expand...
Click to collapse
n960A is a phone?
I just keep coming here to see what OP says next..[emoji23]
Sent from my SM-N960U using Tapatalk
so here's the solution:
it involves searching and reading.
download the latest att firmware for your device.
you can use web sites or sam firm tool 0.3.6 to retrieve the correct firmware file that matches your device.
extrac zip and flash all components, put your device in downlaod mode and flash using odin 3.13.1 or 3.13.3 application. you will need samsung android drivers installed prior.
now the search and reading part comes here.
This is why I have spent less time on XDA. Someone comes in with a question and is ridiculed. Some members are so full of themselves. I'm a long time member and it's gets worse every day. SMH
N960USQS1ARI5 this is my baseband version.
Sanjaysnjy said:
I am having an unlocked at&t note 9. I didn't get any one ui updates till now . Is it possible to flash stock rom on the device and will i get the updates through ota.
Click to expand...
Click to collapse
You're basically asking can you flash your AT&T variant to the Unlocked/Bloatfree version, right?
Yes.And the phone is unlocked.
I can't upload the screenshot it says bad request
These are the software information
Android version
8.1.0
Samsung Experience version
9.5
Baseband version
N960USQS1ARI5
Kernel version
4.9.65-14091849 (gcc version 4.9.x 20150123 (prerelease) (GCC) )
[email protected] #1
Tue Sep 11 13:01:21 KST 2018
Build number
M1AJQ.N960USQS1ARI5
Security Enhancements for Android status
Enforcing
SEPF_SM-N960U_8.1.0_0004
Tue Sep 11 13:07:50 2018
Knox version
Knox 3.2
Knox API level 26
TIMA 4.1.0
Service provider SW ver.
SAOMC_SM-N960U_OYN_ATT_OO_0033
28f114a5fb3f7ece
ATT/ATT/ATT