Enable 2G and 4G / Disable 3G - X 2014 Q&A, Help & Troubleshooting

My phone has the GPS problem with 3g connections. I would like to know if it's possible to force it to NEVER EVER use 3G networls (3G, H, H+). Make it go from 4G to 2G or 1G (E or G or nothing) when 4G is not available.
My phone is Moto X 2014 (XT1097). Rooted, but stock firmware (6.0 with August security patch).
More on the GPS issue (wich affects a large number of devices): https://code.google.com/p/android/issues/detail?id=81140

Try this
Type *#*#4636#*#* on dialer, choose the First option and then select GSM/CDMA/LTE on type of network.. should work

Related

[Q] Lost 3G icon

What could be the cause of the 3G icon to show only G?
5 minutes ago I had 3G. I'm at the same spot at my work place.
Could GSM/WCDMA effect these settings? My network is GSM (Orange).
So I changed it from Auto to GSM only. Then I revert the setting back but I still get G only.
Is there anything to do with HSPA?

Disable "3G" while enabling "H" - possible or not?

My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
3Flight said:
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
Click to expand...
Click to collapse
Unfortunately, it's impossible, you can either choose "H" & "3G" with wcdma/umts or "G" & "E" with GSM in Mobile Networks. You can't choose to leave out 3G when it's doing H, cause both of them are under wcdma mode.
Of cause, if you leave your "Network mode" to auto, it will jump around gsm and wcdma when it see fit. By choosing it to run GSM mode only, will keep your network connect to "E"/"G(gprs)" ONLY; Or WCDMA for "H"/"3G" ONLY.
helo
3Flight said:
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
Click to expand...
Click to collapse
im from malaysia also,im using samsung g5..in my opinion its the the phone or tab firmware or rom problems..because im using maxis and digi broadband..both network are having problem..3g and hsdpa both switch on and back 3g h 3g h..not stabil and anoyying..

[Q] LTE/3G switch issue

Hi, I have an F340L and from the hidden menu I've set the Data connection to Global+LTE. When I'm in an LTE area the phone automatically connects to the 3G network and not to 4G. In order to make a 4G connection I have to enter the hidden menu, set it to LTE only, the device reboots and then the LTE connection is possible. Why is that? I mean why the device prefers 3G in an LTE area and needs the above procedure. Is there anyway to bypass that without a reboot or even automatic 4G connection? Any workaround, input or comments are welcome.

Guide: How to turn LTE off (EASY)

Guide: How to turn LTE off
Turning LTE OFF can be very beneficial to the end user. Turning LTE off can boost your signal and save battery life in areas of weak LTE signal strength. HSPA+ and EDGE signals travel further than LTE signals. At the time of this writing, AT&T’s HSPA+ network performs very, very well. Most people have switched to LTE. It is very easy to pull 10mbps down on HSPA+. Therefore, if LTE is congested you can try out HSPA+ (AT&T calls this 4G). Some people also like to force the device to LTE only; this way they don't get calls, but can receive texts.
1. Open dialer
2. Dial *#*#4636#*#*
3. Device information
4. Scroll down and then choose your preferred network type:
WCDMA Preferred = Your phone will prefer UMTS/HSPA or HSPA+. Will connect to EDGE if it has to. NO LTE.
GSM Only = If selected, your phone will only connect to EDGE (2G). You will be able to call, text, and use slow data.
WCDMA Only = UMTS/HSPA+ only. No EDGE, or LTE whatsoever
GSM/CDMA Auto= Will connect to either UMTS/HSPA/HSPA+ or EDGE (which ever one is available)
LTE/CDMA Auto = Will only connect to LTE and UMTS/HSPA/HSPA+, NO EDGE
LTE/GSM/CDMA Auto = Will connect to LTE, EDGE, or UMTS/HSPA/HSPA+
LTE/GSM Auto = DEAFAULT SETTING
LTE Only = You will only have LTE. You cannot make calls under this setting. Good for those who want data and text capabilities.
Hope this helps!!!
MattMJB0188 said:
Guide: How to turn LTE off
Turning LTE OFF can be very beneficial to the end user. Turning LTE off can boost your signal and save battery life in areas that don’t have good LTE signal strength. HSPA+ and EDGE travel further than LTE signals. At the time of this writing, AT&T’s HSPA+ performs very, very well. Most people have switched to LTE. It is very easy to pull 10mbps down on HSPA+. Therefore, if LTE is congested you can try out HSPA+ (AT&T calls this 4G).
• Open dialer
• Dial *#*#4636#*#*
• Device information
• Scroll down and then choose your preferred network type
o WCDMA Preferred = Your phone will prefer UMTS/HSPA or HSPA+. Will connect to EDGE if it has to. NO LTE.
o GSM Only = If selected, your phone will only connect to EDGE (2G). You will be able to call, text, and use slow data.
o WCDMA Only = UMTS/HSPA+ only. No EDGE, or LTE whatsoever
o GSM/CDMA Auto= Will connect to either UMTS/HSPA/HSPA+ or EDGE (which ever one is available)
o LTE/CDMA Auto = Will only connect to LTE and UMTS/HSPA/HSPA+, NO EDGE
o LTE/GSM/CDMA Auto = Will connect to LTE, EDGE, or UMTS/HSPA/HSPA+
o LTE/GSM Auto = DEAFAULT SETTING
o LTE Only = You will only have LTE. You cannot make calls under this setting
Hope this helps!!!
Click to expand...
Click to collapse
Will the change last through a reboot or does it need to be changed every time the phone is restarted?
scott14719 said:
Will the change last through a reboot or does it need to be changed every time the phone is restarted?
Click to expand...
Click to collapse
Yes. For each reboot you'll have to repeat the above steps. However, I would rather do this, than have to take out the sim each time.
MattMJB0188 said:
Yes. For each reboot you'll have to repeat the above steps. However, I would rather do this, than have to take out the sim each time.
Click to expand...
Click to collapse
I wonder if a NFC task program can be used to program the sequence into a NFC tag so it can be easily changed each time?
scott14719 said:
I wonder if a NFC task program can be used to program the sequence into a NFC tag so it can be easily changed each time?
Click to expand...
Click to collapse
That I don't know.
Thanks! I switched from the default to WCDMA preferred and seem to have a better signal where I live (on a mountain).
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
MattMJB0188 said:
Guide: How to turn LTE off
WCDMA Preferred = Your phone will prefer UMTS/HSPA or HSPA+. Will connect to EDGE if it has to. NO LTE.
GSM Only = If selected, your phone will only connect to EDGE (2G). You will be able to call, text, and use slow data.
WCDMA Only = UMTS/HSPA+ only. No EDGE, or LTE whatsoever
GSM/CDMA Auto= Will connect to either UMTS/HSPA/HSPA+ or EDGE (which ever one is available)
LTE/CDMA Auto = Will only connect to LTE and UMTS/HSPA/HSPA+, NO EDGE
LTE/GSM/CDMA Auto = Will connect to LTE, EDGE, or UMTS/HSPA/HSPA+
LTE/GSM Auto = DEAFAULT SETTING
LTE Only = You will only have LTE. You cannot make calls under this setting. Good for those who want data and text capabilities.
Click to expand...
Click to collapse
Sorry if this is a stupid question but I don't want to screw up my phone. Which would be the default in case I want to turn LTE back on?
alryder said:
Sorry if this is a stupid question but I don't want to screw up my phone. Which would be the default in case I want to turn LTE back on?
Click to expand...
Click to collapse
You will not screw your phone up, no matter which setting you choose. LTE/GSM Auto is the default setting. Once you select your preferred network it will not stick once you reboot your device anyway.
Which one is the best?
galaxy s4 nutjob said:
Which one is the best?
Click to expand...
Click to collapse
Probably leaving it on automatic.
isn't there a toggle switch or a widget that you can download from play store to do he same thing? just wondering
+1. Also interested in a widget of sorts. Any ideas?
plarser48 said:
+1. Also interested in a widget of sorts. Any ideas?
Click to expand...
Click to collapse
There are widgets, but they do not work.
Cannot turn off LTE with above instructions
When I try to follow the instructions, I dial the number and a pop-up appears with "USSD Code Running..." then it closes and a new pop-up appears saying "connection problem or invalid MMI code". I have tried to make this call from various areas with better connections than in my house, but still to no avail. I'd really like to disable the LTE because it is only strong enough to constantly force changes from 4G to LTE and back while massively draining my battery in the process. Any advice?
I upgraded from S3 to S5... In Out location there is one LTE tower.
When at office which is bit far from LTE tower, It only connects to LTE and due to congestion i always get 0.2 mbps only..
But When i had S3, it will switch automatically to 4G(HSPA+) at office and at home or shopping it connects to LTE.
So I called ATT support and they said its due to network congestion and they switched to 4G on their side.
So now its always shows 4G only no LTE but speed are good like 8 to 10 mbps..
I tried the steps in post1 and it shows WCDMA preferred... Is this what they modified remotely?
Try Intelli3G everyone, you have to install Xposed framework and then install it but this app is amazing for convenience.
I tried changing to LTE option its not allowing. I can change to other options other than LTE.
Any idea.. Is it controlled by AT&T?
I called ATT and asked them to change it to LTE.
Now I can change the settings as needed.
So if ATT sets to 4G, you wont be able to switch to LTE.
Is this the only way to change the preferred network mode on SAMSUNG-SM-G900A, ie. by going to details mentioned under #2
Has anyone tried this lately? I know the old 4636 code worked on older galaxies buy I can't get my G900a to respond. Still on 4.4.2
Work fine here on 4.4.2 and 5.0
Sent from my SAMSUNG-SM-G900A using XDA-Developers mobile app

[Q] How to force Moto X Developer edition (Verizon) to use only 3G

PagePlus does not activate an LTE phone on their "low-end" plan but allows a modified LTE phone to be activated. I used an app to make it CDMA only but PagePlus still cannot activate it saying it has some issues because their system still thinks it is LTE. I wonder if I have to something special on the phone.
I unlocked fast boot. The phone is not yet rooted.
Any help is appreciated.
Network connections? Set preffered to 3G/2G.
@kyzn is right with going to Settings > More > Cellular networks > Preferred network type and selecting 3g. This does not mean it will be in 3g only because 2g is there for a backup network signal in case that the 3g or higher signal is lost. Shouldn't be problem for you with what you are asking.
If you would like a little more info here is a link to the similar OP
http://forum.xda-developers.com/showthread.php?t=2602681
Grab this app, it'll take you to a menu which lets you select the mode you want.
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher

Categories

Resources