Database Develop

Hard Brick on Asus ZenPad S8 (Z580CA) or Z580C

HARD BRICK NO MORE!!! Asus ZenPad S8.0 Fix
I made the sad retarded mistake in updating a manual zip file thru CMW... I know retarded... anyways this caused the tablet to Hard Brick bootloader only with very little options, you might even have your serial number showing up as all 1's.
Usually this isn't a big deal sadly this tablet gets little to no love on the internet it seems... This is a guide to help anyone un-brick their tablet
Step 1. First this is more of a windows 10 issue than anything but some driver installs thru the Asus Flash Tool might fail.. something to do about Driver Certificates, so you'll want to disable that on your Win 10.. here a tutorial link for more youtube link HERE
Step 2. Installing the proper Drivers if you haven't already, which will all be in this zip folder HERE
Make sure you installed the ADB-Setup | Intel Android Drv Setup | Asus Android USB Drivers | Asus Flash Tool Installer 1.14
Step 3. Next you'll want to download the .raw file for the ZenPad can be found HERE
Step 4. Open your Asus Flash Tool Installer, boot up your device in the boot mode. (Hold Down the Volume Up + Power ) till you see a little android man with a hardhat.
Step 5. Plug in your device and you should see your device show up as shown HERE, next you'll want to select the model in the model drop down.... Z580C or Z580CA.. then select file. Now if it only lets you select zip thats okay. On the open file dialog box you'll see you can type in the file, simply type in the file path of the .raw file. Once you have that check on Erase Content which will erase all your internal content, and hit flash... let it run until the blue light on the program is green and has flashed succefully.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now you may still get on a bootloop when it restarts, if that happens simply again restart in boot loader screen and do a hard reset and you'll be good to go! Afterwards just throw that new Marshmallow update in the internal and restart .. and you'll device will ask if you want to update now u got your tablet back and Marshmallow!!! I hope this helps if you have any troubles with the links, images please feel free to let me know pm or reply to this post!!! Best of Luck!
.RAW File was provided by Portzebie! Thanks again bud!!

Thanks for this guide. You mentioned .img file, but the file has a .raw extension. Do I need to change the extension from .raw to .img ? Yor response will be highly appreciated. my device is Z580CA.
Thanks again.

tfq535 said:
Thanks for this guide. You mentioned .img file, but the file has a .raw extension. Do I need to change the extension from .raw to .img ? Yor response will be highly appreciated. my device is Z580CA.
Thanks again.
Click to expand...
Click to collapse
Just followed the guide and after a little tinkering was able to get it to work. You don't need to change the file extension.
A few additional notes:
-to install the asus android drivers (not sure if it's even necessary but), open the ASUS_Android_USB_Drivers folder, then the android folder, then right click android_winusb.inf and select install.
-in the asus flash tool, after you select model, the location of the raw file and wipe, make sure you click on the SN to select the device. I didn't do this the first few times and it didn't do anything.

portezbie said:
Just followed the guide and after a little tinkering was able to get it to work. You don't need to change the file extension.
A few additional notes:
-to install the asus android drivers (not sure if it's even necessar but), open the ASUS_Android_USB_Drivers folder, then the android folder, then right click android_winusb.inf and select install.
-in the asus flash tool, after you select model, the location of the raw file and wipe, make sure you click on the SN to select the device. I didn't do this the first few times and it didn't do anything.
Click to expand...
Click to collapse
Thanks again, it worked like a charm.

bert_747 said:
Step 5. Plug in your device and you should see your device show up as shown HERE, next you'll want to select the model in the model drop down.... Z580C or Z580CA.. then select file. Now if it only lets you select zip thats okay. On the open file dialog box you'll see you can type in the file, simply type in the file path of the .img file. Once you have that check on Erase Content which will erase all your internal content, and hit flash... let it run until the blue light on the program is green and has flashed succefully.
Click to expand...
Click to collapse
Thanks for the guide.
The link to your screenshot is missing.

PMikeP said:
Thanks for the guide.
The link to your screenshot is missing.
Click to expand...
Click to collapse
Sorry bout that, screen shots should be working.

a little question,
is it possible to get xfstk files to restore a corrupt bootloader?
thx,,,

ASUS Flashtool doesn't start flashing
Hi all, apprechiated all the posts above however, came across another issue when trying to downgrade from MM 6.0.1 to Lollipop
1. Hooked up my Z580CA tablet as described above.
2. ASUS flashtool recognized my device (right serial number and blue light on)
3. I was not able to put in the raw-file location, only (neither with backslash or without)
4. When pasting path and including backslash I was able to select the raw file (H:\EDV\Tablet\Android 5 LP\RAW\Z580C_all_WW_user_V4.6.1.raw was quoted in the file name window)
5. When I hit start, the flashtool ask for confirmation upon wiping data.
6. Nothing happens
Does anybody have a clue what went wrong

These instructions do not work for Ubuntu. I find it very hard to believe that there is only a Windows version of the flash tool available.

Does anyone know how to upgrade again to MM after flashing this rom?
EDIT: CAUTION People, there seems to be no way to upgrade back to MM after flashing this ROM.

Yes you can upgrade
Servaas said:
Does anyone know how to upgrade again to MM after flashing this rom?
EDIT: CAUTION People, there seems to be no way to upgrade back to MM after flashing this ROM.
Click to expand...
Click to collapse
I downgraded from marshmallow to lollipop with this instrucción and then upgraded again todo mm. It worked without any troubles

edu47 said:
I downgraded from marshmallow to lollipop with this instrucción and then upgraded again todo mm. It worked without any troubles
Click to expand...
Click to collapse
And you did this by downloading the .zip file from Asus Support? Then you placed it on the internal memory of the Zenpad? Unzipped or zipped?
EDIT: Until someone more senior comes to this thread and confirms that they have a. Used the provided .raw file, and b. updated afterwards with the precise steps i'm very much questioning this .raw file legitimately.

Servaas said:
And you did this by downloading the .zip file from Asus Support? Then you placed it on the internal memory of the Zenpad? Unzipped or zipped?
EDIT: Until someone more senior comes to this thread and confirms that they have a. Used the provided .raw file, and b. updated afterwards with the precise steps i'm very much questioning this .raw file legitimately.
Click to expand...
Click to collapse
download on asus homepage the file "UL-P01M-WW-5.4.3.0-user.zip", just copy it like it is on the root of your internal sdcard.
restart your zenpad and it will show you the message, upgrade available.
Edit:are you sure you on lollipop? If you are on Marshmallow ,the device wont recognize the systemupgrade.
if you re rooted it may also wont work

edu47 said:
I downgraded from marshmallow to lollipop with this instrucción and then upgraded again todo mm. It worked without any troubles
Click to expand...
Click to collapse
edu47 said:
download on asus homepage the file "UL-P01M-WW-5.4.3.0-user.zip", just copy it like it is on the root of your internal sdcard.
restart your zenpad and it will show you the message, upgrade available.
Edit:are you sure you on lollipop? If you are on Marshmallow ,the device wont recognize the systemupgrade.
if you re rooted it may also wont work
Click to expand...
Click to collapse
All of it does nothing for me. I'm stuck on 5.0. To people reading this use this .raw file at your own risk.

Servaas said:
All of it does nothing for me. I'm stuck on 5.0. To people reading this use this .raw file at your own risk.
Click to expand...
Click to collapse
Did you made an factory reset after installing lollipop on fastboot mode?
Switch your device off. Turn it on by pressing volume up and powerbottom at the same time.
When the little androidman appears you can stop pressing both bottoms.
Choose factory reset with volume bottom and confirm with power bottom.

edu47 said:
Did you made an factory reset after installing lollipop on fastboot mode?
Switch your device off. Turn it on by pressing volume up and powerbottom at the same time.
When the little androidman appears you can stop pressing both bottoms.
Choose factory reset with volume bottom and confirm with power bottom.
Click to expand...
Click to collapse
I just did this, this is my second tablet by the way, I returned the other one and this second one also does NOTHING when trying to update.
Its a shame really, its a great product but the lousy support on Asus side does little to inspire to again purchase from them. Honestly who rips out multiple user support on a tablet?
I'm all out of options to be honest, I have tried everything even variations on suggested sulotions but nothing works to make the update pop up.
This .raw file to me is broken when there is no way to update beyond that. But I need multi user support so I guess ill just stay on 5.0.

Servaas said:
I just did this, this is my second tablet by the way, I returned the other one and this second one also does NOTHING when trying to update.
Its a shame really, its a great product but the lousy support on Asus side does little to inspire to again purchase from them. Honestly who rips out multiple user support on a tablet?
I'm all out of options to be honest, I have tried everything even variations on suggested sulotions but nothing works to make the update pop up.
This .raw file to me is broken when there is no way to update beyond that. But I need multi user support so I guess ill just stay on 5.0.
Click to expand...
Click to collapse
Probably you still on lollipop by this version "Z580C_all_WW_user_V4.6.1.raw" from the tutorial . Get from asus usa website the "UL-P01M-WW-4.7.1.0-user.zip" and update to latest lollipop version . Then it might update again to mm.
Here the link
h ttp://www.asus.com/us/Tablets/ASUS_ZenPad_S_80_Z580CA/HelpDesk_Download/

edu47 said:
Probably you still on lollipop by this version "Z580C_all_WW_user_V4.6.1.raw" from the tutorial . Get from asus usa website the "UL-P01M-WW-4.7.1.0-user.zip" and update to latest lollipop version . Then it might update again to mm.
Here the link
h ttp://www.asus.com/us/Tablets/ASUS_ZenPad_S_80_Z580CA/HelpDesk_Download/
Click to expand...
Click to collapse
This zip file also doesnt register, nothing pops up and no, when pushing the update button it also does nothing.
It would seem that the OP provided a nice 5.0 raw file that renders your tablet un updateble.
I'll be returning this tablet and going for the only available option in the netherlands the samsung 8 incher.

Z580C tablet is bricked, it happened on update, I think battery was too low. Screen is black all the time, under windows device manager it connects as other devices, MOOREFIELD device with no drivers and I can hear from windows sounds that it reboots after some time. All post #1 drivers are installed.
Please help.
Thank you

magnus_bn said:
Hi all, apprechiated all the posts above however, came across another issue when trying to downgrade from MM 6.0.1 to Lollipop
1. Hooked up my Z580CA tablet as described above.
2. ASUS flashtool recognized my device (right serial number and blue light on)
3. I was not able to put in the raw-file location, only (neither with backslash or without)
4. When pasting path and including backslash I was able to select the raw file (H:\EDV\Tablet\Android 5 LP\RAW\Z580C_all_WW_user_V4.6.1.raw was quoted in the file name window)
5. When I hit start, the flashtool ask for confirmation upon wiping data.
6. Nothing happens
Does anybody have a clue what went wrong
Click to expand...
Click to collapse
Had the same problem and what I did to make it work was.
1. Lunch Asus Flash Tool
2. Connect device in download mode (volume up + power)
3. Wait for device to be visible in Asus Flash Tool ( Serial number + blue dot) - you may need to restart tablet using reboot droidboot
4. Select model number
5. Point to raw file and choose to erase data (accept the prompt )
6 Hit Start
What I also did prior to that was factory reset of tablet
hope that helps you

Honor 9 Lite "how i repair MY bootloop"

Just for Info
I am brick MY phone, what have i done ?
On all my phones is first doing: bootloader unlock, install twrp and rooting.
1 - i login by huawei, fill the form and return my unlock-code
2 - search twrp ( i am found ; but it was the wrong one. [i think i need new eyes])
3 - on phone : menu / 7x tip on build activate developer options / go to developer options / enable oem-unlock and enable usb-debugging
4 - usb-wire in phone and pc, on pc (linux) start terminal (the same as windows dos-prompt), type "adb devices", on phone-screen "access for develop" hook & ok
5 - adb reboot bootloader
6 - fastboot devices (connection test)
5 - fastboot flash recovery_ramdisk twrp.img
6 - fastboot reboot
7 - phone reboot in twrp (not OS)
from now, what ever i do, phone boot only in twrp BOOTLOOP
now i am search in XDA and AH (german community AndroidHilfe) "honor 9 lite bootloop" NOTHING
by random found on AH "Huawei P smart [How to Root] + TWRP - Root - Anleitung". Huawei P smart is sister from Honor 9 Lite (very helpful thread-writer on AH)
ho help : at this moment no downloads at huawei/honor 9 lite (for help i need "update.app") now i wait...
2 days later (wait is not my strength) i found FHMate10Tool. users write "this can work/cant work - test it.
i test it. on windows-pc open explorer, go to folder, right-click on FHMate10Tool.exe, "run as admin", dos-prompt open and write text from tool
usb-wire in pc and phone (phone is on)
point 1 in tool: "root phone" ; i write "1" and press enter
tool write "this rooting phone: for yes press enter", i press enter, 4..5 seconds later write tool "your phone is rootet and rebooting"
phone reboot and boot i customOS - WOH :laugh: phone configure, apps install and phone working (always inside the wrong twrp)
5 days later phone write"new update anailable! install?" "yes" and ota-update download (i think 1 hour) and write "update now" "yes"
update go to factory-update-mode (erecovery?) begins and brake by 25%, "what a hell !!!", i reboot
now the best idea from my life. i copy with es-explorer(root) from /data/update/Hwouc/... the "update.app" to my sd-card.
my phone have build 8.0.0.121, the update.app is LLD-L31 8.0.0.127(C432)FULL. This is important, the little updates not inside "system, recovery". the FULL is what i need.
start HuaweiUpdateExtractor, select update.app, settings "all hook out", extract "recovery_ramdis.img" and "system.img" (automatic extract the header-files)
now copy this 4 files to my adb-folder, phone in bootloader-mode, usb-wire pc to phone
open dos-promt, cd.. to adb-folder, check connection with "fastboot devices", connection work and the fun begins
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
NOW is custom recovery and system on phone
to clear userdata
- fastboot erase userdata (this make what you reed: ERASE)
- now boot to erecovery (usb-wire in pc and phone, vol-up and power press on phone) and make factory reset. this make low-level-format with userdata.
- reboot and phone is clean and fresh as a new phone. no twrp, no rootet. if i wish (yes) i can fresh install
only restriction at this time: twrp is beta! no full work, backup/restore system = work, backup/restore data = NOT work.
supplement
this work on my phone! on your phone? test at your owen risk
bevor twrp has full-function: attention to this point. no data-backup. everyone brake phone: you begins by zero /better begins zero else phone ded
experience
i search for LOS15.1 or RR, for this phone nothing found. i test system.img(oreo!) from other models (my risk, my phone, my fun). i test to now 5x, next test in 5 minutes
now nothing run on my phone. flash *.img, no boot to OS, the game starts from the beginning
- inserted 20180325 13:05 test not work, return to customOS
- inserted 20180325 13:40 systemOS work, SuperSU is from old install! ALL GOOD :good:
bootloader is open if: PHONE Unlocked & FRP Unlock
I hope this is helpful for your bootloop :angel:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@JamesBott flash this RR.. it will work in Honor 9 Lite..
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688

@VigneshS007
thank's for your help. i test rom in next 2..3 hour. then i see is work/no work...
i think, i open new threat > "Honor 9 Lite "my test's with other rom's" <
i am german, i need "order"
if i search "bootloop" i wish find bootloop and anwer for this theme in 1 thread
what is the bootlop answer is in "new rom" ? and i don't find this thread ? that's NO good
all other nations : this is "german thinking" (for you is "can" / not "must" !!!)
is the same as comedy "you can laugh, but you do not have to" <- it's a joke
here is not the place for principle disputes, it's only my thinking and i hope you understand me
my english is only "learning by writing" and google-translating
i am now installed Telegram and look in this group
i have to tell you, i think that's a pity
xda is the world-community for android and all world-user. any user search for question's and answer's and this in xda.
i wish, the tegram-group come in to xda and all user (world) find these inside xda (my thinking !)
why: look in this forum. i feel "this is my forum" . i wish other write also here (ROMs...Development)
or is it to early ? the phone is to young / to short on market ?
How is the developer to make twrp with 100% working ? for this phone ! i donate with 20€ ! honestly! (i hope, this is incentive enough)

sorry, duplicate from #3

@VigneshS007
hi brother, please look
https://forum.xda-developers.com/9-...r-9-lite-test-devices-developer-roms-t3768950

Bootloop again
JamesBott said:
Just for Info
I am brick MY phone, what have i done ?
On all my phones is first doing: bootloader unlock, install twrp and rooting.
1 - i login by huawei, fill the form and return my unlock-code
2 - search twrp ( i am found ; but it was the wrong one. [i think i need new eyes])
3 - on phone : menu / 7x tip on build activate developer options / go to developer options / enable oem-unlock and enable usb-debugging
4 - usb-wire in phone and pc, on pc (linux) start terminal (the same as windows dos-prompt), type "adb devices", on phone-screen "access for develop" hook & ok
5 - adb reboot bootloader
6 - fastboot devices (connection test)
5 - fastboot flash recovery_ramdisk twrp.img
6 - fastboot reboot
7 - phone reboot in twrp (not OS)
from now, what ever i do, phone boot only in twrp BOOTLOOP
now i am search in XDA and AH (german community AndroidHilfe) "honor 9 lite bootloop" NOTHING
by random found on AH "Huawei P smart [How to Root] + TWRP - Root - Anleitung". Huawei P smart is sister from Honor 9 Lite (very helpful thread-writer on AH)
ho help : at this moment no downloads at huawei/honor 9 lite (for help i need "update.app") now i wait...
2 days later (wait is not my strength) i found FHMate10Tool. users write "this can work/cant work - test it.
i test it. on windows-pc open explorer, go to folder, right-click on FHMate10Tool.exe, "run as admin", dos-prompt open and write text from tool
usb-wire in pc and phone (phone is on)
point 1 in tool: "root phone" ; i write "1" and press enter
tool write "this rooting phone: for yes press enter", i press enter, 4..5 seconds later write tool "your phone is rootet and rebooting"
phone reboot and boot i customOS - WOH :laugh: phone configure, apps install and phone working (always inside the wrong twrp)
5 days later phone write"new update anailable! install?" "yes" and ota-update download (i think 1 hour) and write "update now" "yes"
update go to factory-update-mode (erecovery?) begins and brake by 25%, "what a hell !!!", i reboot
now the best idea from my life. i copy with es-explorer(root) from /data/update/Hwouc/... the "update.app" to my sd-card.
my phone have build 8.0.0.121, the update.app is LLD-L31 8.0.0.127(C432)FULL. This is important, the little updates not inside "system, recovery". the FULL is what i need.
start HuaweiUpdateExtractor, select update.app, settings "all hook out", extract "recovery_ramdis.img" and "system.img" (automatic extract the header-files)
now copy this 4 files to my adb-folder, phone in bootloader-mode, usb-wire pc to phone
open dos-promt, cd.. to adb-folder, check connection with "fastboot devices", connection work and the fun begins
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
NOW is custom recovery and system on phone
to clear userdata
- fastboot erase userdata (this make what you reed: ERASE)
- now boot to erecovery (usb-wire in pc and phone, vol-up and power press on phone) and make factory reset. this make low-level-format with userdata.
- reboot and phone is clean and fresh as a new phone. no twrp, no rootet. if i wish (yes) i can fresh install
only restriction at this time: twrp is beta! no full work, backup/restore system = work, backup/restore data = NOT work.
supplement
this work on my phone! on your phone? test at your owen risk
bevor twrp has full-function: attention to this point. no data-backup. everyone brake phone: you begins by zero /better begins zero else phone ded
experience
i search for LOS15.1 or RR, for this phone nothing found. i test system.img(oreo!) from other models (my risk, my phone, my fun). i test to now 5x, next test in 5 minutes
now nothing run on my phone. flash *.img, no boot to OS, the game starts from the beginning
- inserted 20180325 13:05 test not work, return to customOS
- inserted 20180325 13:40 systemOS work, SuperSU is from old install! ALL GOOD :good:
bootloader is open if: PHONE Unlocked & FRP Unlock
I hope this is helpful for your bootloop :angel:
View attachment 4457135
Click to expand...
Click to collapse
I have to apply the procedure point by point unfortunately the factory reset of the erecovery remains blocking to zero, and I remain in bootloop. . . Do you have a backup stock flashable rom with twrp? OR ANOTHER SOLUTION? THANKS

i have finally twrp reflash and i made a factory reset with twrp ... normal boot result and everything works ... i have the possibility thereafter of reflashed erecovery stock ... but not useful for me for the moment ... how is it that my firmware number does not match your file? I am in b128 and your update full file is in b127?

@angixspirit
my last FULL-Update is "b127".
Now is TWRP with de-/encrypt in short time available (i am test beta-version)
I wish reset my "data" to factory-settings(crypt)
I use recovery_ramdisk_BKL-L04_nocheck (thank's @Atarii) for install my FULL-Update
After this reboot my phone, FULL-Update is installed AND "data" is crypted (factory-state)
Now work twrp (new twrp in test-version !) WITH de-/encryption.
I hope in next days comming new thread from developer in this forum.
The new TWRP is in standard-look and -feeling and -language.
Over night came update "b128"
The way with recovery_ramdisk_BKL-L04_nocheck (thank's @Atarii) have advantage
- the complete stock-rom is reflashed (with all partitions inside update)
- erecovery work (by me)
disadvantage
- the huawei-bloatware now again delete

Where to find this recovery?recovery_ramdisk_BKL-L04_nocheck?
---------- Post added at 04:11 PM ---------- Previous post was at 03:36 PM ----------
angixspirit said:
i have finally twrp reflash and i made a factory reset with twrp ... normal boot result and everything works ... i have the possibility thereafter of reflashed erecovery stock ... but not useful for me for the moment ... how is it that my firmware number does not match your file? I am in b128 and your update full file is in b127?
Click to expand...
Click to collapse
But I used your update full b127 and when such starts I'm in b128 (update at startup age maybe?)

https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085
your firmware
i think, your build is b128. if you update to b127 = downgrade. i dont know if this work in stock-rom.
Search
you see on xda-side in browser on top / right the "search-field" ?
Search-Field = "Type device or find apps, ROMs, & more"
this search in xda and is faster as search in google
Your personal task : search in xda "Huawei Firmware Finder" and look for thread.
If you found the thread then download the Software to your PC, install and search in FirmwareFinder "FULL-Upate" for your phone.
I am found LLD-L31 8.0.0.131(C432). This is actual the last build for download.
I'm curious if you think so
If you found : you can see, what TeamMT offer on Firmware for your phone.

Nice
I repeat the procedure with your ram file erecovery disk ... Same result impossible to make factory reset, and Huawei tells me that the tel is rooted and I am in b128 ... I have yet made a wipe of the storage system intern etc with twrp before, and. I used your full update b127 for fastboot ...
So here after installation I used firmware finder I chose the firmware b127 full I used the proxy for download internally .. And here my system asks me the official update to b127 ... No problem the system comes back with the bloatware in erecovery the factory reset works fine ... And since update removed to b128 b130 ... ?
Strongly the new twrp that I continue my experimentation
Ps Ps I just saw your message on update finder .. I know all this thank you very much

Huawei LLD-AL10
Phone Relocked
FRP Lock
any fix

Zunayedazad said:
Huawei LLD-AL10
Phone Relocked
FRP Lock
any fix
Click to expand...
Click to collapse
https://forum.xda-developers.com/9-lite/how-to/guide-unlock-frp-phone-bootlooping-t3808650
Tell me your C-Number to find the correct firmware to flash.
Sent from my kminiltexx using XDA Labs

[GUIDE][EUI][Coolpad Cool 1][TWRP/Root] Easy TWRP/Root Using QFIL for EUI

Today I will be making some short and easy guide to easily flash TWRP on your Coolpad Cool 1 from your stock EUI. It will be easier to flash any custom ROM if you manage to get TWRP installed on your device.
Preparation :
1. Get Developer Option on your Coolpad Cool 1. You can do this by going to Setting>About phone and search for Build Number. Tap on it for 6-7 times until it tells you that you are now a developer.
2. Go into Developer Option and enable USB Debugging and OEM Unlocking.
3. Download all the necessary ADB Drivers, Qualcomm QLoader Drivers, Coolpad Assistant software, Magisk, EUI Recovery Coolpad Cool 1 and QPST/QFIL. (You can just google this, I have limited internet, so don't be counting too much on me to upload this)
Instruction :
1. Power off your phone.
2. Open QFIL software
3. Press Power + Volume Up + Volume Down button simultaneously and connect your phone to PC. This is to connect your phone into EDL (Emergency Download Mode).
4. Make sure your phone has been detected as "Qualcomm HS-USB QDloader xxxx (COMx)" in QFIL
5. At "Select Build Type", select "Flat Build"
6. At "Select Programmer" browse to your downloaded recovery folder path and select "prog_emmc_firehose_652.mbn" inside the folder. Don't worry, it will only show you this one file only anyways, so just click it.
7. At "Select Flat Build" , you can load your recovery files by using the "Load XML" button. Select "rawprogram0.xml" in the first popup and "patch0.xml" at the second popup. Again, it will only show you this one file in the popup box so you can't miss it anyways.
8. After all is set, click the download button and wait for it to finish flashing.
9. After the process finished, boot into your recovery directly by pressing Power button + Volume Up.
10. Flash your preferred rooting package. I use Magisk v16 and it's working fine with EUI.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks mate. Is 5here any custom rom for it ?

bouyhy01 said:
Thanks mate. Is 5here any custom rom for it ?
Click to expand...
Click to collapse
You can try this : https://forum.xda-developers.com/android/development/rom-jui-rom-vr12-cuoco92-t3780509#post76380258

can i use this method to leere le 3?

itsmeyukiedcqii said:
can i use this method to leere le 3?
Click to expand...
Click to collapse
I don't have that device but you can always try and let us all know.

Aplication cant download any files. Allways exit downloading

Τhe device model is R116 (not c103 or C106) Any tool that works with this model?? Qfil, Miflash, Coolpad download assistant didn't do the job. And ADB commands cant see it either.

Does this require formatting data?

Maybe yes i dont know.

Can we just do fastboot oem unlock and flash twrp?

Case closed. Recycle bin gave the solution.

Hi my device is showing as an "Unknown Device". I have installed all the drivers which are available accross the web. Please suggest me...

Anas Rahman said:
Can we just do fastboot oem unlock and flash twrp?
Click to expand...
Click to collapse
No you can't. I hope we can. I tried it and it doesn't work. Our device just don't recognize adb command.

I have a problem when i try to install recovery via QFIL ..... please help me???
Code:
Download Fail:Sahara Fail:QSaharaServerFail:Processfail

tanks for you
vulturext said:
Today I will be making some short and easy guide to easily flash TWRP on your Coolpad Cool 1 from your stock EUI. It will be easier to flash any custom ROM if you manage to get TWRP installed on your device.
Preparation :
1. Get Developer Option on your Coolpad Cool 1. You can do this by going to Setting>About phone and search for Build Number. Tap on it for 6-7 times until it tells you that you are now a developer.
2. Go into Developer Option and enable USB Debugging and OEM Unlocking.
3. Download all the necessary ADB Drivers, Qualcomm QLoader Drivers, Coolpad Assistant software, Magisk, EUI Recovery Coolpad Cool 1 and QPST/QFIL. (You can just google this, I have limited internet, so don't be counting too much on me to upload this)
Instruction :
1. Power off your phone.
2. Open QFIL software
3. Press Power + Volume Up + Volume Down button simultaneously and connect your phone to PC. This is to connect your phone into EDL (Emergency Download Mode).
4. Make sure your phone has been detected as "Qualcomm HS-USB QDloader xxxx (COMx)" in QFIL
5. At "Select Build Type", select "Flat Build"
6. At "Select Programmer" browse to your downloaded recovery folder path and select "prog_emmc_firehose_652.mbn" inside the folder. Don't worry, it will only show you this one file only anyways, so just click it.
7. At "Select Flat Build" , you can load your recovery files by using the "Load XML" button. Select "rawprogram0.xml" in the first popup and "patch0.xml" at the second popup. Again, it will only show you this one file in the popup box so you can't miss it anyways.
8. After all is set, click the download button and wait for it to finish flashing.
9. After the process finished, boot into your recovery directly by pressing Power button + Volume Up.
10. Flash your preferred rooting package. I use Magisk v16 and it's working fine with EUI.
Click to expand...
Click to collapse
Request for these files
boot1.bin
boot2.bin
main.bin (user data main.bin)
Please

ghasem.hf said:
Request for these files
boot1.bin
boot2.bin
main.bin (user data main.bin)
Please
Click to expand...
Click to collapse
Nobody help
I am waiting

Quote:
Originally Posted by vulturext
Today I will be making some short and easy guide to easily flash TWRP on your Coolpad Cool 1 from your stock EUI. It will be easier to flash any custom ROM if you manage to get TWRP installed on your device.
Preparation :
1. Get Developer Option on your Coolpad Cool 1. You can do this by going to Setting>About phone and search for Build Number. Tap on it for 6-7 times until it tells you that you are now a developer.
2. Go into Developer Option and enable USB Debugging and OEM Unlocking.
3. Download all the necessary ADB Drivers, Qualcomm QLoader Drivers, Coolpad Assistant software, Magisk, EUI Recovery Coolpad Cool 1 and QPST/QFIL. (You can just google this, I have limited internet, so don't be counting too much on me to upload this)
Instruction :
1. Power off your phone.
2. Open QFIL software
3. Press Power + Volume Up + Volume Down button simultaneously and connect your phone to PC. This is to connect your phone into EDL (Emergency Download Mode).
4. Make sure your phone has been detected as "Qualcomm HS-USB QDloader xxxx (COMx)" in QFIL
5. At "Select Build Type", select "Flat Build"
6. At "Select Programmer" browse to your downloaded recovery folder path and select "prog_emmc_firehose_652.mbn" inside the folder. Don't worry, it will only show you this one file only anyways, so just click it.
7. At "Select Flat Build" , you can load your recovery files by using the "Load XML" button. Select "rawprogram0.xml" in the first popup and "patch0.xml" at the second popup. Again, it will only show you this one file in the popup box so you can't miss it anyways.
8. After all is set, click the download button and wait for it to finish flashing.
9. After the process finished, boot into your recovery directly by pressing Power button + Volume Up.
10. Flash your preferred rooting package. I use Magisk v16 and it's working fine with EUI.
Click to expand...
Click to collapse
After doing that,
when I enter in recovery mode, it just show 2 options:
Update system
or
Clear data
What should I do

twrp internal storage 0mb coolpad c103 how to fix?
Hello,
I did all the procedures. But it can't install SuperSU. And it shows internal storage 0 mb. Then I rebooted the phone. And I rebooted the phone again in recovery mode but this time it gives me just two options format or update. Can someone please tell me how to solve this issue? Please.
Thank you.

cunhaandre said:
Hello,
I did all the procedures. But it can't install SuperSU. And it shows internal storage 0 mb. Then I rebooted the phone. And I rebooted the phone again in recovery mode but this time it gives me just two options format or update. Can someone please tell me how to solve this issue? Please.
Thank you.
Click to expand...
Click to collapse
Why not try magisk?
I'm not sure but your internal is 0mb because TWRP isn't able to decrypt your data partition. I don't use this phone but I have the same problem with my phone, what I did is that I flashed a zip which unencrypts the data and then formatted my internal storage it works fine after that
You can Try backing up your data and formatting your internal storage after flashing magisk

Anas Rahman said:
Why not try magisk?
I'm not sure but your internal is 0mb because TWRP isn't able to decrypt your data partition. I don't use this phone but I have the same problem with my phone, what I did is that I flashed a zip which unencrypts the data and then formatted my internal storage it works fine after that
You can Try backing up your data and formatting your internal storage after flashing magisk
Click to expand...
Click to collapse
Hello,
thank you for your reply, I already solved the issue. I did all the things again, and then I formated internal storage and become normal, then I transferred the ROM via mtp and flashed it. All is fine now.
Thank you

How To Guide [GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]

Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3151 (Realme 8i) and RMX3286 (Narzo 50) ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!
ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)
Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool
Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:
FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
A.32 (Indian) - Mega | GDrive
A.32 (Global) - Mega | GDrive
A.30 (Indian) - Mega | GDrive
These firmwares are from Realme 8i but will work for Narzo 50 also (I will add Narzo 50 firmwares soon)
Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it
1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder.
5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
6)After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
Click on Connections and select UART and set Baud Rate to 921600
7) after that choose scatter file and also if not set, set your download-agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
8) Uncheck oplusreserve2 first. Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!
After flashing it should look like this. Download has been complete. Enjoy!
Notes :
After this phone might not boot due to encryption, you can do any of the below procedures to format your data and boot your phone
1. In case you can access recovery by holding volume and power button - Wipe all data from recovery and reboot
2. In case you cannot access recovery, power off phone then enter this command in mtkclient :
Code:
python mtk e metadata,userdata,md_udc
and connect phone while holding both volume buttons. After this just reboot phone
Also note that first boot takes some time, so don't panic leave it for few minutes it'll boot
Credits :
https://github.com/bkerler/ for decryptor and for creating the tool.
If you face any issues contact me here

great.. does this lock bootloader?? and will SafetyNet pass after this??

It doesn't work.Returns an error.

Why do you have another phone identified in the last screenshot.?And when the firmware reaches the file oplusreserve2.img gives an error that I posted yesterday?Take a look at the screenshot above.

And this is not a firmware, it takes a minute.Does not flash the super partition.You can just flash the stock files to recover and THAT's IT.

sany.svenson said:
Why do you have another phone identified in the last screenshot.?And when the firmware reaches the file oplusreserve2.img gives an error that I posted yesterday?Take a look at the screenshot above.
Click to expand...
Click to collapse
The last screenshot is for representative purpose only... No one have actually bricked yet so... The guide is pretty generalized for any mtk... If you have followed the guide properly it should work... Let me upload A32 firmware here try that.

I updated the link with latest sp flash tool... Try with that

sany.svenson said:
And this is not a firmware, it takes a minute.Does not flash the super partition.You can just flash the stock files to recover and THAT's IT.
Click to expand...
Click to collapse
edit the scatter file find "super.img" and change is_download: "false" to "true" then save it and flash

pritish1998 said:
I updated the link with latest sp flash tool... Try wit
Click to expand...
Click to collapse

pritish1998 said:
The last screenshot is for representative purpose only... No one have actually bricked yet so... The guide is pretty generalized for any mtk... If you have followed the guide properly it should work... Let me upload A32 firmware here try that.
Click to expand...
Click to collapse
I unpacked 32 firmware myself.I have it.

sany.svenson said:
I unpacked 32 firmware myself.I have it.
Click to expand...
Click to collapse
Did you merge the super.img?

pritish1998 said:
Did you merge the super.img?
Click to expand...
Click to collapse
sany.svenson said:
I unpacked 32 firmware myself.I have it.
Click to expand...
Click to collapse
Also the given A30 fw is fine just edit the scatter file and make super.img flash true

pritish1998 said:
Also the given A30 fw is fine just edit the scatter file and make super.img flash true
Click to expand...
Click to collapse
can you upload a scatter file here?

sany.svenson said:
can you upload a scatter file here?
Click to expand...
Click to collapse
@bobongros please upload it for him

bobongros said:
edit the scatter file find "super.img" and change is_download: "false" to "true" then save it and flash
Click to expand...
Click to collapse
can you upload a scatter file here?

sany.svenson said:
can you upload a scatter file here?
Click to expand...
Click to collapse
I updated the firmware link just use it... it'll work fine... Also after bypass you don't need to hold volume buttons

pritish1998 said:
I updated the firmware link just use it... it'll work fine... Also after bypass you don't need to hold volume buttons
Click to expand...
Click to collapse
It reaches oplusreserve2 and an error comes out.The fleshtul from the new link does not want to read the scatter file.Writes that it does not work with this processor.
Sorry.You're tired of me already...

sany.svenson said:
It reaches oplusreserve2 and an error comes out.The fleshtul from the new link does not want to read the scatter file.Writes that it does not work with this processor.
Sorry.You're tired of me already...
Click to expand...
Click to collapse
Other people tried and it's working for them... Idk what is the problem at your end. ... Reach out to me on telegram we will help

pritish1998 said:
Other people tried and it's working for them... Idk what is the problem at your end. ... Reach out to me on telegram we will help
Click to expand...
Click to collapse

sany.svenson said:
View attachment 5480563
Click to expand...
Click to collapse
with that fleshtul that you posted last.How can I find you in a telegram?Give me a link to your profile.

General [GUIDE][UNBRICK] Realme 8 Unbrick/Upgrade/Downgrade [RMX3085]

Hello everyone! So after the new MediaTek DAA and SLA protection bypasses you can find GitHub repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3085 (Realme 8) ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!
ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)
Requirements:
PC or Laptop
Internet connection
Realme 8
USB cable
Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool
Decrypted OFP (OPPO FIRMWARE PACKAGE) :
Indian
A.22 (Indian) - GDrive
A.24 (Indian) - GDrive
A.26 (Indian) - Gdrive
C.05 (Indian) - GDrive
C.09 (Indian) - GDrive
C.11 (Indian) - GDrive
Global
A.22 (Global) - GDrive
A.24 (Global) - GDrive
A.26 (Global) - GDrive
Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it
Steps:
1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
4) Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
5) Choose MediaTek USB Port and install it.
6) Then run the brom.bat under Bypass folder.
7) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
8) After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
9) Click on Connections and select UART and set Baud Rate to 921600
10) After that choose scatter file and also if not set, set your download-agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Select all the Partitions except opporeserve2 and cdt_engineering. otherwise you will get errors.
*11) If you want to flash super.img partition also then download this scatter.txt file and replace it with the another scatter file which is present in the decrypted firmware folder. After that select it again in sp flash tool.
Again Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!
After flashing it should look like this. Download has been complete. Enjoy!
"Congrats Now your Realme 8 is Unbricked "
Credits :
https://github.com/bkerler/ for decryptor and for creating the tool.
If you face any issues write them down below...

Some people having this problem so I want to add one more thing to the guide. If you are not having any issues related to boot then don't follow these steps.
After waiting more then 10 minutes, if it doesn't boot up/bootloop. Or shows DM-Verity corrupt error then do this.
1) Try boot into stock recovery by pressing volume up + power button after that when your screen flashes quickly unpress buttons.
2) Now press volume down + power button, by pressing these you will boot into stock recovery.
3) Go to format option and do a full format.
4) Your phone will definitely boot up after that.

Hi
I would like to ask how you obtained the system for realme 8 in the latest version.
Can you download somehow from your device?

HowWof said:
Hi
I would like to ask how you obtained the system for realme 8 in the latest version.
Can you download somehow from your device?
Click to expand...
Click to collapse
From realme offical site

Could you send a link because there is no information on the Polish realme site

HowWof said:
Could you send a link because there is no information on the Polish realme site
Click to expand...
Click to collapse
Realme 8 Firmware (RMX3085) - Realme Firmware
Realme 8 Firmware RMX3085 Official Flash File (Stock ROM). flash your phone using realme flashtool or MSM Download tool.
realmefirmware.com

if "Brick" occured in rooting process - then can recovery be done without data loss :
Prerequisite: firmware version on the body must the same as downloaded "Decrypted OFP" (as example both is A.22 )
HowTo:
at step of SPFlashing (currently that is 10-th)
- check ONLY next partitions in SPFlash to restore :
PRELOADER RECOVERY VBMETA LK LK2 BOOT
... and NO any of other
(as thats only are touched by currently described rooting processes)

after recovery exist on every boot:
"dm-verify corrupted..."
how to get out of this message?
Reset with clearing data not helps ...

DaLiV said:
after recovery exist on every boot:
"dm-verify corrupted..."
how to get out of this message?
Reset with clearing data not helps ...
Click to expand...
Click to collapse
Wait for 10mins if it didn't boot then.
Format with mtk client
python mtk e metadata,userdata,md_udc

that boots ... BUT
on every boot thet alerts about "corruption"
ok cleared partitions with python...
still the same alert ...

DaLiV said:
that boots ... BUT
on every boot thet alerts about "corruption"
ok cleared partitions with python...
still the same alert ...
Click to expand...
Click to collapse
Try booting into stock recovery and format from there

Ok. format from recovery menu solves ...
now that boots normally =
- no alert
-no boot allowing by pressing key required
good behaviour to see when boot subsystem altered, as at every boot alerted and required to press longer power button to confirm/allow starting ...
interesting, that is something new on mine (device versions) or overall ...

I have it anyway. have you solved it yet? Do I understand correctly?

after doing the insstruction, mine bootlooping and enters recovery mode

XCentrialG said:
after doing the insstruction, mine bootlooping and enters recovery mode
Click to expand...
Click to collapse
Maybe you missed some step. Can u explain ur problem briefly. What u did and what happened.

niki.rsb said:
I have it anyway. have you solved it yet? Do I understand correctly?
Click to expand...
Click to collapse
I Think that is not so solvable /possible if someone decode debug and finds /... but that is quite acceptable for rooting /if you don't want to make illegal spionage and so on/ ... also as if your device will be rooted by someone - you will see alert of changes on boot ... that is good ...
if you are rooted - you must be alerted .
but if you will going to stock rom and have protection - then flashing "stock" (surely without 3 partitions that IMEI-and-so-on-related ) and then format from recovery menu helps return to "factory" operation

Tony Stark said:
Maybe you missed some step. Can u explain ur problem briefly. What u did and what happened.
Click to expand...
Click to collapse
just a casual day to update my firmware, reboot and my phone refused to boot anymore, and then i came here, following all the steps very carefully (i read every steps twice so i dont make any mistake), and no luck.

XCentrialG said:
just a casual day to update my firmware, reboot and my phone refused to boot anymore, and then i came here, following all the steps very carefully (i read every steps twice so i dont make any mistake), and no luck.
Click to expand...
Click to collapse
There should be some mistake in your process. Because this guide is working and tested by many people.

Does global firmware have realme dialer instead of google dialer?
Can I flash Global firmware my indian device?

on your firmware package, it does not flashes super.img by default. Because in scatter file
- partition_index: SYS48
partition_name: super
file_name: super.img
is_download: false
changing false to true helps fixing destroyed super partition