Related
Hi there, I just wanted to try something...
I see that my Z3C charges very slow with the original UK charger. It charges 800mah every sec9nd. So I tried with the iPad charger and it is still the same.. maybe abit lower, at 600mah. what is going on? it takes almost 3-3.5 ahours to charge this phone... seriouslly? Sometimes I forget to charge it overnight and chargin it at day is like charging though a USB port...
Sent from my D5803 using XDA Free mobile app
Maths.
2600 mAh battery.
800 mA charger.
2600/800 = 3.25 or 3 hours and 15 minutes.
Today, I don't think this phone can accept anything like 2A charger (don't really know) . Else, it would take 1.3h or 1 hour and 18 minutes.
Get a 2A charger, disconnect every electrical equipment and charge your phone.
Mazzeru said:
Maths.
2600 mAh battery.
800 mA charger.
2600/800 = 3.25 or 3 hours and 15 minutes.
Today, I don't think this phone can accept anything like 2A charger (don't really know) . Else, it would take 1.3h or 1 hour and 18 minutes.
Get a 2A charger, disconnect every electrical equipment and charge your phone.
Click to expand...
Click to collapse
But this is strange....If the stock charger says it gives 1.5A, then why is it charging so much slower? at 600 or 800 mah? thats like USB pc speed... Isnt this device supported for quick charge 2.0? I may be able to buy a quick charge capable charger so it charges faster? any solution?
Sent from my D5803 using XDA Free mobile app
Ever thought about your phone using power too? Plus some power is lost in heat.
fenchai said:
But this is strange....If the stock charger says it gives 1.5A, then why is it charging so much slower? at 600 or 800 mah? thats like USB pc speed... Isnt this device supported for quick charge 2.0? I may be able to buy a quick charge capable charger so it charges faster? any solution?
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
Yes Quickcharging will improve charging time. But as stated above it also depends if you use your phone in the meantime and its idel consumption. The fastest charging time will be if you turn of your phone and then start charging.
I'm getting over 1600mA (according to cooltool), phone charges in 1.5 hours... Factory 1500mA charger, its the same with regular usb and magnetic connector. Rooted 4.4.4
lakicamm said:
I'm getting over 1600mA (according to cooltool), phone charges in 1.5 hours... Factory 1500mA charger, its the same with regular usb and magnetic connector. Rooted 4.4.4
Click to expand...
Click to collapse
WOW, 1.5 hours, thats just impossible for me. I wonder what is going on... I will check on cooltool
Turn off and charge your phone, and check how fast its charging, mine takes about 1.45hrs with 1.5A factory charger.
Guys I bought a supposed quick charger for my Sony Z3C. When it arrived i read the specs on it and they were 5V 2A. Is it safe to use with my Z3C? If so will it actually make charging quicker?
cheers
It sure is safe (and quick), charge on
so is the stock charger charging at what? it says 1.5A; 800 or as stated 1.5?
I am looking for best car charger, my phone will be all day on in the car, and I am looking for best solution for charging in the car, and fastest.
I found few good chargers but not sure are they support quick charge
Samsung OEM ECA-U21CBE Micro-USB 2-Amp Rapid In-Car Power Charger
and
Car Charger, iOttie RapidVolt 5Amp/25-Watt Dual Port USB Car Charger
Or is there some third better solution? Sorry I can't post links
thank you
anything above 2A is consider fast/rapid charge and barely any difference than the "quick charge" not to mention, saving a few mintues might do more harm than good to your replaceable battery.. at 2A, the phone will go from 6-10% battery to 50% in about 25 minutes.
Anker:
http://www.amazon.com/gp/product/B00D82O68Y/
Ottie:
http://www.amazon.com/gp/product/B00KTBOUWO/
I have the Anker and would buy it again, and has tons of positive reviews..
Thank you, what about Verizon Quick Charge 2.0?
I have used Verizon QUALCOMM version and would recommend the quick charge version if you want to take advantage of the quick charge. If time to charge I not an issue then obviously any high amp charger like the units cited above such as iottie would work
Is quick charge healthy for battery in my case? Or maybe should I get slower one?
I am using the Airdock.
While I can't say I loved it with the S5 (was falling off) the flat back of the Edge fits perfectly on it so I'm much happier with it.
Fun streaming video, back passengers can watch video off of it with the car speakers...
works well.
rhesus98 said:
While I can't say I loved it with the S5 (was falling off) the flat back of the Edge fits perfectly on it so I'm much happier with it.
Fun streaming video, back passengers can watch video off of it with the car speakers...
works well.
Click to expand...
Click to collapse
I think we are talking about chargers
TozABG said:
I think we are talking about chargers
Click to expand...
Click to collapse
Airdock is a wireless charger.
TozABG said:
Is quick charge healthy for battery in my case? Or maybe should I get slower one?
Click to expand...
Click to collapse
faster charging will always put a bit more wear on battery than charging at a slower rate. most people here will probably swap devices often so probably doesn't matter for them. if you plan to keep your device for a few years and want max battery life then maybe use a 5V 2A charger instead (one that i've linked to above).
2A is still "fast charge" the only difference is it's Quick Charge 1.0 which is at 5 Volts compared to Quick Charge 2.0 that runs at 9 Volts.
better example:
Quick Charge 1.0 - 5V @ 2A (5V * 2A) = 10 Watts of power
If your phone is at around 8-10% you'll get to about 50% charge in about 30 minutes.
Quick Charge 2.0 - 9V @ 1.7A (9V * 1.7A) = 15 Watts of power (up to 12V * 3A = 36 watts for some tablets)
If your phone is at around 8-10% you'll get to about 50% charge in about 20-25 minutes.
Quick Charge 2.0 will only be a little bit faster once the battery gets to around 50-60%, then it will throttle down to Quick Charge 1.0 rates to keep the battery from getting too hot and causing excessive wear.
All Quick Charge 2.0 devices are also backwards compatible with Quick Charge 1.0, meaning that you can use a Quick Charge 2.0 device with a Quick Charge 1.0 supply, and visa versa.
In short: Quick Charge 2.0 will only save you about 15 minutes to completely charge your phone compared to the normal 5V @ 2A chargers.
Get Verizons branded car charger with fast charge. Workscexcellent, and AND has a little flashlight right above the micro charge plug, which comes in super handy in dark car. Very well made.
tft said:
anything above 2A is consider fast/rapid charge and barely any difference than the "quick charge" not to mention, saving a few mintues might do more harm than good to your replaceable battery.. at 2A, the phone will go from 6-10% battery to 50% in about 25 minutes.
Anker:
http://www.amazon.com/gp/product/B00D82O68Y/
Ottie:
http://www.amazon.com/gp/product/B00KTBOUWO/
I have the Anker and would buy it again, and has tons of positive reviews..
Click to expand...
Click to collapse
Thats not true, Yes its better
if you want Fast charge it has to have 9v out
others have 5v out even tho some have a 2.4amp out not a fast rapid charger
Good Car charger
Search Amazon for ASIN:B00ZA1E3IE
I've got two of these:
http://www.amazon.com/Getwow-Charge-Dual-Port-Charger-Adapter/dp/B00V347I9S/ref=sr_1_2?ie=UTF8&qid=1437142458&sr=8-2&keywords=getwow+quick+charge+2.0&pebp=1437142467005&perid=0CTJ7JA68RAQ65CF2GVN
One in my car for my S6 Edge, one in my wife's SUV for her Note 4. Both work fantastic. They have one QC 2.0 port and one 2A port. Check it out!
Not sure whether this Car Air Conditioner Vent Mount is for you or not.
This looks like same as adaptive fast wall charger:
http://www.samsung.com/us/mobile/cell-phones-accessories/EP-LN915UBESTA
http://www.amazon.com/gp/product/B00X4JGELS?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Did anyone try it?
shaq1907 said:
This looks like same as adaptive fast wall charger:
http://www.samsung.com/us/mobile/cell-phones-accessories/EP-LN915UBESTA
http://www.amazon.com/gp/product/B00X4JGELS?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Did anyone try it?
Click to expand...
Click to collapse
I bought this one. Didn't fully test yet but when I plug this, it says "fast charging". It would be better if this has light notification. But it's good that it charges fast.
One of the big concerns I had with the proprietary Dash Charging system is whether I'd be able to use previously purchased power banks.
I've been testing my OP3 with the RAVPower 26800mAh powerbank along with the Anker USB-C to USB 2.0 cable.
The powerbank is capable of outputting 2.4a, which produces a quick charge on other devices.
On the OP3, I get between 30 and 57% charge / h (measured using the Battery Monitor Widget app), which is acceptable to me.
It's not Dash Charging speed, but it'll work in case you were wondering.
MI Charger
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
quote from Android central
"For the first time, OnePlus is including a fast charging system on the OnePlus 3. Rather than go with another standard like Qualcomm's Quick Charge, OnePlus made its own "Dash Charge" system. Dash Charge promises a 60% charge on your OnePlus 3 in just 30 minutes, which is just as fast as any other system — the only catch here is you'll have to use the Dash Charger in the box and the included cable.
Your OnePlus 3 will charge just fine off of other chargers — whether they're Quick Charge 3.0, Nexus Rapid Charge or something else — but you just won't get Dash Charge speeds."
I have the oneplus power bank, I'll see how it charges using the cable that came with the phone.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Royaledevil said:
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
Click to expand...
Click to collapse
Seemed like a good choice as outputting 3.6A would be good enough for me. Would you be able to point me a link where to purchase it from? Many thanks.
are you sure the 3.6a isnt a maximum of all the ports on the bank?
usually if they have multiple ports they say a maximum load for all being X, but I've only ever seen a maximum amperage of 2.4a on a port (few and far between) most 2.1a as stated per port.
even then they charge my OP3 at 1.2a using oneplus's cable, same as my s5 beforehand.
there is a great app on the store called Ampere which tells you your current charging/discharging amps
superbrowndude said:
I have the oneplus power bank, I'll see how it charges using the cable that came with the phone.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
and ?? whats the verdict ?
It's never going to charge faster then 2amp on any ordinary charger or battery pack
If you want fast charging u need to use a dash charger
Sent from my ONEPLUS A3000 using XDA Free mobile app
Royaledevil said:
I have a MI 16,000 mAh portable charger with an output of 3.6A. I am getting a pretty awesome speed on 1 min per percent charge. After charge battery drain is lower compared dash charger.
Click to expand...
Click to collapse
Link to that powerbank please
Framedtrash said:
It's never going to charge faster then 2amp on any ordinary charger or battery pack
If you want fast charging u need to use a dash charger
Click to expand...
Click to collapse
Check my post on another thread,
You can use OPPO VOOC Powerbank,
It charge as fast as at least 3.5A
It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger
Sent from my iPhone 4S using XDA Free Mobile App
Hastaloego said:
and ?? whats the verdict ?
Click to expand...
Click to collapse
Same question, if he doesn't answer. I'm gonna have to test it out when I get my OnePlus 3 package. On 23rd September. @superbrowndude please give us result
Framedtrash said:
It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger
Sent from my iPhone 4S using XDA Free Mobile App
Click to expand...
Click to collapse
No offense but this is a flawed theory, did you forget what site you're on? That's what development is for, to boldy go where no one has gone before, so contrary to your belief, I'm sure its possible, can and will happen.
OP3 is only able to charge at 1.5A max with everything except the dash charger and cable, from my tests.
BoiBundy said:
No offense but this is a flawed theory, did you forget what site you're on? That's what development is for, to boldy go where no one has gone before, so contrary to your belief, I'm sure its possible, can and will happen.
Click to expand...
Click to collapse
No it is not a flawed theory. The phone does not have the quick charging components in the phone but instead in the charger and cable. Only VOOC and DASH chargers will quick charge this phone. It's not theory it's fact. Anyways fast charging does deteriorate the battery a bit faster than normal charging so it's not good to use it all the time
crzykiller said:
No it is not a flawed theory. The phone does not have the quick charging components in the phone but instead in the charger and cable. Only VOOC and DASH chargers will quick charge this phone. It's not theory it's fact. Anyways fast charging does deteriorate the battery a bit faster than normal charging so it's not good to use it all the time
Click to expand...
Click to collapse
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
What's the easiest way to test what amperage a non-Dash charger is charging at? I'm curious to know if some of my Quick Charge adapters will provide 2.4A. I've only done a very brief test with my QC3 car charger, but it gave me 3% in about 4 minutes. That's about what I was getting on a QC2.0 phone, and that's perfectly acceptable in my books.
BoiBundy said:
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
Click to expand...
Click to collapse
Huh? that's my first comment lol and VOOC and DASH are exactly the same technology and have their specific patent. As far as I know, it will only charge with those specific chargers since it is not only the charging brick holding some proprietary charging solution but also the cable. I have a USB-C cable that can withstand over 4A but will not work even when plugged to the DASH charger. Now yes there may be a charger that quick charges this phone but it'd be very unlikely that it does exist since the cable and brick would have to have the exact specifications as the DASH/VOOC chargers.
BoiBundy said:
Here's what you wrote: "It would not be charging at 3+amp
Unless your using a dash charger your never going to be able to charge over 2amp using any other charger
Doesnt matter what the output of the charger/battery pack is the phone will never take more then 2amp unless its a dash charger"
You said with conviction that "the phone will 'NEVER' take more [than] 2 amp unless its a dash charger"
The VOOC charger is in fact 'not' a dash charger and it charges above 2 amps. So very simply, your postulation is wrong. I took notice that you quickly changed your stance but forgot how convinced you seemed to be.
All of this leads me to believe that there are other chargers even beyond the VOOc and the Dash that can/will fast charge the One plus 3
Click to expand...
Click to collapse
Haha
As stated VOOC and DASH are the exact same thing, VOOC was created by OPPO and the rebranded by oneplus
No amount of software is going to change a hardware limitation
I guess your going to tell me that a dev is going to release a software patch that restores the headphone jack on a iPhone
Download ampere from the playstore if you want to get a rough idea of what your device is charging at
Sent from my iPhone 4S using XDA Free Mobile App
fp1707 said:
Same question, if he doesn't answer. I'm gonna have to test it out when I get my OnePlus 3 package. On 23rd September. @superbrowndude please give us result
Click to expand...
Click to collapse
Same question. Really interested in the Oneplus Power Bank charging results. Please.
Hello!
i've bought Nillkin Disk Charger III which support fast charge (9V/1.7A max 10W) so does original Sony XZ2 charger and XZ2 itself. Sadly, when charging using Nillkin, XZ2 uses normal charging mode, not fast. 25% in hour. Only 400-500mA on wireless charger vs 2600mA on cable. With or without phone case, doesn't matter.
What can I do to charge it faster?
Bump.
Buy offical one by Sony
I use this one and all is fine. https://www.amazon.com/dp/B01KJL4XNY/?tag=flv-21&ascsubtag=6987aeb4-b272-4b5f-935b-f94acfec1a3d
chero90 said:
I use this one and all is fine. https://www.amazon.com/dp/B01KJL4XNY/?tag=flv-21&ascsubtag=6987aeb4-b272-4b5f-935b-f94acfec1a3d
Click to expand...
Click to collapse
Can you download Ampere app from the play store and run it while charging on this Anker pad. Let us know if this one can really charge the XZ2 beyond the standard 5w speed. Report the mah if it can exceed the 800mah standard qi rate. Remember, fast wireless charging at 9-10w should be around 1400 to 1500mah.
I have tried 7 different brands of fast 10w wireless chargers so far (but not an Anker yet). None of them can exceed 800mah on the XZ2. I wonder if the official Sony one can really do it at 1500mah.
So, please use Ampere and report back your results with the Anker, thank you!
doraemon6688 said:
Can you download Ampere app from the play store and run it while charging on this Anker pad. Let us know if this one can really charge the XZ2 beyond the standard 5w speed. Report the mah if it can exceed the 800mah standard qi rate. Remember, fast wireless charging at 9-10w should be around 1400 to 1500mah.
I have tried 7 different brands of fast 10w wireless chargers so far (but not an Anker yet). None of them can exceed 800mah on the XZ2. I wonder if the official Sony one can really do it at 1500mah.
So, please use Ampere and report back your results with the Anker, thank you!
Click to expand...
Click to collapse
max with the Anker QI charger was 760mA. I use it to charge it at my office. I never cared about the charging speed A friends Galaxy S9 can use 1420mah with the same charger.
doraemon6688 said:
Can you download Ampere app from the play store and run it while charging on this Anker pad. Let us know if this one can really charge the XZ2 beyond the standard 5w speed. Report the mah if it can exceed the 800mah standard qi rate. Remember, fast wireless charging at 9-10w should be around 1400 to 1500mah.
I have tried 7 different brands of fast 10w wireless chargers so far (but not an Anker yet). None of them can exceed 800mah on the XZ2. I wonder if the official Sony one can really do it at 1500mah.
Click to expand...
Click to collapse
I think this video can give you an idea of the Sony wch20 charging profile: https://youtu.be/BnasDqGFcFg close to 1500mah but not for a long time.
I too have a similar question. But it's about maximum allowed power for XZ2 wireless charging.
I just talked with Sony support and they too have no clue how XZ2 Qi wireless work. They told me better to buy (if at all) other brands' chargers with output NOT exceeding 9W, since it is the maximum output by the official Sony wireless charger.
But apparently some 3rd party brand reps told me that Sony uses Qi 3.0 and 10W chargers are completely fine. And all fast charger on Amazon output 10W with Qi 3.0 adapter.
So I am really confused whether those faster charger is safe for XZ2 at all.
'And it is very confusing that the Sony original adaptor has 3 working power: 5 V 2.7A DC, 9V 1.8 A DC, 12 V 1.35 A DC.
What do you guys think?
fredhdx said:
'And it is very confusing that the Sony original adaptor has 3 working power: 5 V 2.7A DC, 9V 1.8 A DC, 12 V 1.35 A DC.
Click to expand...
Click to collapse
That's called Qualcomm Quick Charge.
While USB is specified for 5V QuickCharge 2.0 can use 5V, 9V and 12V (not used in phones).
QC 3.0 is even better as it has adaptive Voltage scaling from 4V to 9V theoretically.
Practically it's around 4.6 to 7.5V changing fluently during the charger process.
For normal cable powered charging the device itself decides how much amperage it wants to draw. The wall charger can only set an upper limit like 'only has 1.5A at 5V'
As wireless charging sends out power I think there is a communication between sender and receiver which handles the power output. Haven't really read much about that though.
Hi,
Has anyone found a charger other than the official one that will charge at more than 5W? I bought a 10W wireless charger from Amazon and it only charges at 5V 1A whereas the same charger charges a friends iPhone at 7.55V 1A. Has Sony built something into the phone/software that only enables 9W charging with the official dock?
Thanks
980ctane said:
Hi,
Has anyone found a charger other than the official one that will charge at more than 5W? I bought a 10W wireless charger from Amazon and it only charges at 5V 1A whereas the same charger charges a friends iPhone at 7.55V 1A. Has Sony built something into the phone/software that only enables 9W charging with the official dock?
Thanks
Click to expand...
Click to collapse
Not so far. Got a Seneo fast wireless charger and some other brand I can't remember the name of; both tried with multiple QC charging packs I have lying around (and even Sony's brick supplied with the phone). According to AccuBattery, the XZ2 never pulls more than around 700 mAh, while my Lumia 950 XL hovers around 1700.
I'm thinking you're right, there is something special the XZ2 looks for in their WCH20 wireless charger unfortunately. I've tried turning Battery Care on and off too but that hasn't changed anything as far as raising the current draw.
I really have to try it when the battery is below 20% though to be a fair test.
eelpout said:
Not so far. Got a Seneo fast wireless charger and some other brand I can't remember the name of; both tried with multiple QC charging packs I have lying around (and even Sony's brick supplied with the phone). According to AccuBattery, the XZ2 never pulls more than around 700 mAh, while my Lumia 950 XL hovers around 1700.
I'm thinking you're right, there is something special the XZ2 looks for in their WCH20 wireless charger unfortunately. I've tried turning Battery Care on and off too but that hasn't changed anything as far as raising the current draw.
I really have to try it when the battery is below 20% though to be a fair test.
Click to expand...
Click to collapse
Update: So I bought an Anker Powerwave wireless charger and QC3.0 adapter which Anker claim supports 10W charging on the XZ2. I have tested it and it charges at 7.45V at 1.2 Amps so not quite 10W but it charges from 0 to 100% in 2 hours 50 minutes which is much better than the first wireless charger i bought which took over 4 hours 30 minutes at 5W. Hope this helps.
980ctane said:
Update: So I bought an Anker Powerwave wireless charger and QC3.0 adapter which Anker claim supports 10W charging on the XZ2. I have tested it and it charges at 7.45V at 1.2 Amps so not quite 10W but it charges from 0 to 100% in 2 hours 50 minutes which is much better than the first wireless charger i bought which took over 4 hours 30 minutes at 5W. Hope this helps.
Click to expand...
Click to collapse
actually, 7.45v at 1.2A is 9 watts. Which is reportedly the XZ2's peak draw.
A couple questions:
What did you use to check the charging stats? (I'm using AccuBattery currently). I don't think the latest Xperia phones have any fast charge indications like some other OEM's do.
Was the 7.45V/1.2 amps reading at 0% battery?
Was Battery Care enabled?
Did you happen to check the charge levels at various times during the 2h 50m and see if it fluctuated?
I'm using an Anker QC 3.0 charger with my Seneo which charges great over USB, so I don't think my problem is the charger. I'm going to let mine go to below 20% and try again.
eelpout said:
actually, 7.45v at 1.2A is 9 watts. Which is reportedly the XZ2's peak draw.
A couple questions:
What did you use to check the charging stats? (I'm using AccuBattery currently). I don't think the latest Xperia phones have any fast charge indications like some other OEM's do.
Was the 7.45V/1.2 amps reading at 0% battery?
Was Battery Care enabled?
Did you happen to check the charge levels at various times during the 2h 50m and see if it fluctuated?
I'm using an Anker QC 3.0 charger with my Seneo which charges great over USB, so I don't think my problem is the charger. I'm going to let mine go to below 20% and try again.
Click to expand...
Click to collapse
I use accurate battery on every device I maintain.
At least to give an alert, if 80% battery capacity is reached during charging.
eelpout said:
actually, 7.45v at 1.2A is 9 watts. Which is reportedly the XZ2's peak draw.
A couple questions:
What did you use to check the charging stats? (I'm using AccuBattery currently). I don't think the latest Xperia phones have any fast charge indications like some other OEM's do.
Was the 7.45V/1.2 amps reading at 0% battery?
Was Battery Care enabled?
Did you happen to check the charge levels at various times during the 2h 50m and see if it fluctuated?
I'm using an Anker QC 3.0 charger with my Seneo which charges great over USB, so I don't think my problem is the charger. I'm going to let mine go to below 20% and try again.
Click to expand...
Click to collapse
Sorry, yes I know its almost 9W. I was just making the point that it didn't reach the 10W Anker claim it can.
I use an inline USB amp meter...
The 7.45V 1.2 amps was from 0% to 70% after that it was 7.45v 1.0 amp until 100%
The 1.2 amps could only be achieved by careful positioning on the pad, if it was slightly to the left/right it would drop to 1.0 amp.
Battery care was disabled.
Thanks
980ctane said:
Sorry, yes I know its almost 9W. I was just making the point that it didn't reach the 10W Anker claim it can.
I use an inline USB amp meter...
The 7.45V 1.2 amps was from 0% to 70% after that it was 7.45v 1.0 amp until 100%
The 1.2 amps could only be achieved by careful positioning on the pad, if it was slightly to the left/right it would drop to 1.0 amp.
Battery care was disabled.
Click to expand...
Click to collapse
I think the 9W cap is Sony, not the Anker.
I'm going to send back my Seneo, obviously something is not working right with the XZ2 regards fast charging. Tried it with several different QC chargers, moving it around on the pad etc..
Thanks!
eelpout said:
I think the 9W cap is Sony, not the Anker.
I'm going to send back my Seneo, obviously something is not working right with the XZ2 regards fast charging. Tried it with several different QC chargers, moving it around on the pad etc..
Thanks!
Click to expand...
Click to collapse
No problem
I would love to test out the WCH20 but in the UK Sony want £129. Have found it on Amazon for £70 but it's still silly money for a charging dock!
If you're considering the Anker Powerwave, it is very good. My only gripe is even though it stops charging once the phone reaches 100%, the cooling fan keeps running until you remove the phone from the pad which seems like an oversight.
Cheers.
Monolithus said:
Hello!
i've bought Nillkin Disk Charger III which support fast charge (9V/1.7A max 10W) so does original Sony XZ2 charger and XZ2 itself. Sadly, when charging using Nillkin, XZ2 uses normal charging mode, not fast. 25% in hour. Only 400-500mA on wireless charger vs 2600mA on cable. With or without phone case, doesn't matter.
What can I do to charge it faster?
Click to expand...
Click to collapse
I have the Nilkin charging stand for my XZ2 Premium and I am more than happy, it takes about 2hrs to go from 50% to full charge, it will never be as fast as wired charging, and the battery life on the Premium is great, I can easily get 2 days but would rarely need that.
Sony WCH20 can do 1700 mAh but only to 50% of battery charge. After that it is slower 1400 mAh and that again slower.
980ctane said:
Update: So I bought an Anker Powerwave wireless charger and QC3.0 adapter which Anker claim supports 10W charging on the XZ2. I have tested it and it charges at 7.45V at 1.2 Amps...
Click to expand...
Click to collapse
980ctane said:
I use an inline USB amp meter...
The 7.45V 1.2 amps was from 0% to 70% after that it was 7.45v 1.0 amp until 100%
The 1.2 amps could only be achieved by careful positioning on the pad, if it was slightly to the left/right it would drop to 1.0 amp.
Click to expand...
Click to collapse
Guess I'll have to try the Anker Powerwave (which one did you get if I may ask?). I tried yet another brand, which again, fast charges my old Lumia 950 XL just fine around 1600 mAh, but the XZ2 refuses to go beyond ~700 mAh. Wondering if it's my phone or the XZ2's coil is just in a weird spot.
I'll have to spring for an inline USB meter. maybe it'll help me find the "sweet spot."
I just bought a Xz1 compact. It works great except that it won't fast charge; I've tried using the charger that came with phone and another I had lying around. Is there anything I can do for a fix? I checked the battery settings to make sure none of the options were enabled. I tried disabling Battery Care, but it didn't help.
Is your charger Sony Quick Charger UCH12?
https://www.sonymobile.com/ng/products/accessories/quick-charger-uch12/
t020608 said:
Is your charger Sony Quick Charger UCH12?
https://www.sonymobile.com/ng/products/accessories/quick-charger-uch12/
Click to expand...
Click to collapse
It's definitely the same shape. No model # tho.
The stock charger included in the XZ1 Compact retail box is only 1.5A, it isn't a fast charger and will not fast charge the phone. You will need to get a Qualcomm Quickcharge 3.0 compatible charger for fast charging.
RonJeremyClarkson said:
The stock charger included in the XZ1 Compact retail box is only 1.5A, it isn't a fast charger and will not fast charge the phone. You will need to get a Qualcomm Quickcharge 3.0 compatible charger for fast charging.
Click to expand...
Click to collapse
That's quite cheap of them. The other charger I tried would fast charge my LG G5. Shouldn't it do that same for the XZ1?
adam79 said:
That's quite cheap of them. The other charger I tried would fast charge my LG G5. Shouldn't it do that same for the XZ1?
Click to expand...
Click to collapse
What are the specifications of the other charger?
RonJeremyClarkson said:
What are the specifications of the other charger?
Click to expand...
Click to collapse
It's an Anker QuickCharge 3.0
adam79 said:
It's an Anker QuickCharge 3.0
Click to expand...
Click to collapse
That charger should fast charge the XZ1C then. I did some searching and found out that unlike other manufacturers, Sony phones will not indicate anywhere when the phone is being fast charged:
https://talk.sonymobile.com/t5/Xperia-XZ1-Compact/Quick-Charge-Not-Working/m-p/1281209/highlight/true#M1178
There is an app called Ampere on the Play Store that will show how fast the phone is being charged, but it isn't 100% accurate. The best way to find out would be to simply measure the charging times from empty to full.
I have tested alot of chargers..even a 80 USD USB PD 61w. This damn phone wont charge faster than 1.6 amps @ 5v
Is it some kind of software limitation? I had the P20 and it charges fast as hell with QC3.0. 0-80% in 40mins.
I tested this Xz1 and it took nearly 70mins 0-80% with battery optimization off.
Sony claims and i belive them that battery life will last longer,, but who gives a ****. I want qc3.0 charging speed.
Charging at 5v and around 1.5amps. Ive read somewhere that the battery gets to warm charging like [email protected]
So its not adaptable, i placed my phone with its charger connected thru the window (-2 C) and it had like 2%.
This damn phone is restricted to 1.5-1.6 ampere (5v)..it wont go faster. So why is it QC3.0 cert?
This annoys me alot..isnt there a 30w charger? I guess it wont help.
Im gonna buy one of those plugs that show you amps, wattage and so on..doesnt believe the software you can download.
I believe that XZ1 Compact IS QC3.0 but battery get to warm, so they reduce charging speed...
I personally prefer no fast charge. The physically life of the battery last longer. My Nexus 6P had fast charge, it's not holding up for 2 hours now.
I have read somewhere that you have to disable all the battery saver stuff in order for QuickCharge to fully have effect.
However, even with all that enabled, my phone charges really quick from empty to full in like 2 hours.
Looks good to me.
"These devices contain the hardware necessary to achieve Quick Charge 3.0. It is at the device manufacturer’s discretion
to fully enable this feature."
About devices compatible with qc3.0
Qualcomm website
RonJeremyClarkson said:
The stock charger included in the XZ1 Compact retail box is only 1.5A, it isn't a fast charger and will not fast charge the phone. You will need to get a Qualcomm Quickcharge 3.0 compatible charger for fast charging.
Click to expand...
Click to collapse
The charger included in my XZ1 Compact's retail box was the Sony Quick Charger UCH12 which is a fast charger compatible with Qualcomm Quickcharge 3.0. It also charges my phone reasonably fast.
https://www.sonymobile.com/ng/products/accessories/quick-charger-uch12/specifications/
t020608 said:
The charger included in my XZ1 Compact's retail box was the Sony Quick Charger UCH12 which is a fast charger compatible with Qualcomm Quickcharge 3.0. It also charges my phone reasonably fast.
https://www.sonymobile.com/ng/products/accessories/quick-charger-uch12/specifications/
Click to expand...
Click to collapse
Interesting, what country did you get the XZ1C in? In most regions the included charger is the non-fast charging UCH20:
https://www.sonymobile.com/ng/products/accessories/usb-charger-uch20/
RonJeremyClarkson said:
Interesting, what country did you get the XZ1C in? In most regions the included charger is the non-fast charging UCH20:
https://www.sonymobile.com/ng/products/accessories/usb-charger-uch20/
Click to expand...
Click to collapse
My XZ1C region is Taiwan.
4rz0 said:
I have read somewhere that you have to disable all the battery saver stuff in order for QuickCharge to fully have effect.
However, even with all that enabled, my phone charges really quick from empty to full in like 2 hours.
Looks good to me.
Click to expand...
Click to collapse
2 hours is BAD. 2700mAh battery fully charged in 2 hours? The Huawei P20 charges its 4000mAh battery in like 45min.
The UCH20 wont pass 1.5 amps (5v).
If you turn your device off and charging and also turn off the battery opti. i believe 0-100% in like an hour..
And for those who believe its the charger are wrong. I have tried QC 3.0, QC4,0, 61W USB-c. This device is what do you say in English.."strangled" ...software limitation..
What about the XZ2 and the XZ3? Any notification ? They use the same charger i believe
2 hours? Something's wrong. U might have the right charger, but... R u sure u have a decent type c cable? Not all of them are the same (I have some experience, believe me)
maaakn said:
And for those who believe its the charger are wrong. I have tried QC 3.0, QC4,0, 61W USB-c. This device is what do you say in English.."strangled" ...software limitation..
Click to expand...
Click to collapse
So you're saying that the XZ1c isn't capable of a fast charge?!!?
Dany XP said:
2 hours? Something's wrong. U might have the right charger, but... R u sure u have a decent type c cable? Not all of them are the same (I have some experience, believe me)
Click to expand...
Click to collapse
Got a recommendation for a quality cable? I have a few different ones. The only name I can remember is Brexit, but I could be spelling it wrong.
I use Aukey QC 3.0 . Work great for fast charger since I use Z3C , then Z5C , now XZ1C. I use usb doctor to check volt and ampere, 9V output and 1A++, sometime got 2A when below 15% of battery.
My device is root, and use charge limit for the life time battery.