Screen not locking - Huawei P9 Questions & Answers

I'm having a problem, when the screen sleeps the phone does not lock. I can turn it on by pressing the power key, and the phone will go straight into the home screen after swiping the lockscreen..it does not asks for the pin (which I have setup) and there is no need for fingerprint sensor to read my finger....ive tried all the setting...I must be doing something wrong (some times it works...but rarely).....the phone is all stock UK.

Do you have any Bluetooth device setup with smart unlock? My Garmin watch and some earphones are set for me so I can unlock without finger or code as long as devices are in range of Bluetooth and connected
Sent from my Hauwai P9 EVA-L09 using Tapatalk

Aah...yes I do...I have a watch that is connected.
Thanks for that

Related

Brightness after phone call / key unlock issues

Hello everyone. I have an AT&T Tilt, and it's great so far, except for two issues:
1) After I end a phone call, the backlight seems to go off and the screen is very dim. Pressing keys does not bring the backlight back. If I power the screen off and on, the backlight comes back on and the screen is at its normal brightness.
2) I lock my AT&T Tilt using the "Device unlocked" area on my home screen, and when I unlock the phone, sometimes it asks for my PIN, and sometimes it just shows the unlock button on the screen. My settings are for a 12 hour timeout.
If anyone can shed any light on possible fixes to these issues, that would be great. Thanks!
mrbofus said:
Hello everyone. I have an AT&T Tilt, and it's great so far, except for two issues:
1) After I end a phone call, the backlight seems to go off and the screen is very dim. Pressing keys does not bring the backlight back. If I power the screen off and on, the backlight comes back on and the screen is at its normal brightness.
2) I lock my AT&T Tilt using the "Device unlocked" area on my home screen, and when I unlock the phone, sometimes it asks for my PIN, and sometimes it just shows the unlock button on the screen. My settings are for a 12 hour timeout.
If anyone can shed any light on possible fixes to these issues, that would be great. Thanks!
Click to expand...
Click to collapse
I have the same issue after a phone call....
Same issue here too... it doesn't happen when on USB-power... and I don't remember it doing this before the security-Exchange policy was forced onto my phone.
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
I think this happens coz the phone goes into standby / lock mode during your phone call. Just press the on/off button to turn screen off, and press again to turn on. Now your phone will be responsive again.
Minor bug.
Or you can just scroll the volume wheel to turn it back on.
michi123 said:
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
Click to expand...
Click to collapse
thanks michi
thanks everyone for your replies. I will try the StayUnlock application.
I still don't understand my second issue though. If the bug is causing this issue, shouldn't it at least be consistent in either requiring me to type in my PIN or just hit the unlock button? I have set my phone to lock after 12 hours, so it should never ask for my PIN, just the unlock button...
I now see that people have been having the first issue since the Cingular 8125 but I have been unable to find any references to my second issue.
ATT Til and Backlight
When making a phone call, once connected, about 12 seconds later the screen goes dark regardless of the setting on the backlight. I am not using a password, and the only way to get back is to use the power button. using the phone button puts the call on hold

lock the device immediate with pin code

Hi all
Now I've set the device to ask a pin code to lock the device after 30 minutes of being not used. Isn't there an option/way so the pin lock is immediately active when I want it to be (like pushing some seconds on the end button), using another hardware button or by executing some file?
I've tried to map '"\Windows\Keylock.exe" /toggle' to a hardware key (with an timeout of 0 minutes in settings - lock), but that just prompts the way the/which keys should be locked, as if you would execute keylock.exe without the '/toggle' parameter.
The question is.. what invokes the pin unlock screen to appear?
PS: best wishes for 2008!
hold end call for 3 seconds!
ekw, thanks for you answer but
pushing the end call button:
- doesn't activate/show the pin lock screen,
- any "child who can read" knows howto unlock the device.
the thing is that if it gets stolen, they need to do a hard reset so sensitive data (putted on the device instead of the SD) will be erased
I already tries S2U2 but that locks the device in the same 'security' level as pushing the end call button for some seconds and it mentions howto unlock it
fyi: having the HTC TyTN II with HTC stock ROM (dutch)
Instant PIN Security
As noted in the first post, is there a way to get the phone to security lock on command, where you have to enter the pin to use it again?
I know you can hold down the end call button and get it to screen lock, but is there a way to get it to go into security lock?
I would like to turn the automatic settings off, so that the phone ONLY goes into security lock when I say it does, or, set it so that it only does it automatically like every three hours. That way, I can set it to go into security lock more often if I wish to.
Thanks!
if you turn the screen off using the power button,m and back on, does the lock not activate?
Or have you not told it to lock when waking from standy?
flashy said:
if you turn the screen off using the power button,m and back on, does the lock not activate?
Or have you not told it to lock when waking from standy?
Click to expand...
Click to collapse
That works if you set auto lock on 0 minutes, but then you have to enter the PIN each and every time you turn the thing on. He wants it to lock only when he presses a lock key.
I unfortunately don't know of anything that does it.
kilrah said:
That works if you set auto lock on 0 minutes, but then you have to enter the PIN each and every time you turn the thing on. He wants it to lock only when he presses a lock key.
I unfortunately don't know of anything that does it.
Click to expand...
Click to collapse
Exactly. Thank you for your comments.
I don't want to have to enter the PIN every time I turn it on. Well, I know I can set it for an hour or longer and that would be fine.
But I want to be able to put it down, with the PIN code enabled, without worrying about random prying eyes looking into it or using it.
Anyone else have any thoughts??

Diamond unlocks itself, hardware problem?

Basically I had a look about here and can't see anyone else with the same issue.
I've not long had the phone and the other night I had a call quite late saying I'd been phoning them 5 times. I'd locked my phone but when I looked at it it was awake and unlocked.
I can lock my phone (hold down the end call key) but with a bit of movement to the phone it brings up the unlock screen and unlocks itself.
This also happens if I lock the phone and turn off the screen with the power button. After a little shake about the phone will turn on and unlock itself.
You can imagine the problems this can cause whilst in my pocket.
I've not messed with the firmware yet or even any registry entries, it's as it was from HTC.
I am having this same issue with mine. I hold down the End key for a few seconds to lock, it locks successfully, but if I move my finger a bit and touch any other part of the surface it unlocks almost instantly. Sometimes the lock remains, but it's more likely that it will get unlocked.
I tried using TouchLockPro, but that didn't seem to help me much (it seems like it's not even functioning, actually). I'm running A.Z.T.O.R. V7 WWE ROM.
Nick
Have you tried going to settings then hitting "key lock". On the screen that comes up check the first option "lock all buttons except power button".
Works fine for me - when I switch off screen using power button everything is locked (buttons and screen) until I hit power button again or I get an incoming call.
Mine is set to that, but it doesn't seem to have much effect.
Sometimes I will hit the power button to shut the screen off and later when I pull it out of my pocket the screen is on and something (e.g. Calendar, System Time, etc) is open. During the period it was in my pocket I received no calls or texts.
When I try to hold the end key to lock the phone, it will lock it for ~1 second and then automatically unlock it. Doing it a second or third time will usually get a lock that "sticks" (at least for a while).
There has to be a good solution for this out there, but I've tried PocketShield and TouchLockPro without luck.
Nick
Diamond unlocks itself
I have this problem as well. I went to a meeting, locked my phone and it made 20 calls to my friend abroad, so I am really pissed, it happened before but I thought it was because it got knocked in my handbag.- Please help
Also my battery life has depreciated in a big way, at first 24 hours , 4 months later I'm lucky if it's lasting 6 hours and that's without making a call. I've turned of wi-fi, 3G etc. What is happening
Use sensorlock its great if you set it to unlock when you take the stylus out and relock when u slide it back in
mancsoulja said:
Use sensorlock its great if you set it to unlock when you take the stylus out and relock when u slide it back in
Click to expand...
Click to collapse
TouchLockPro should just work. In post #5 alternatives are mentioned (and also why the built-in Windows Mobile lock is not a solution for your problem)!

Problems with power button instant lock when using "trusted devices" feature

Problems with power button instant lock when using "trusted devices" feature
Im having an issue with locking my phone's screen. I have the option checked to instantly lock the phone when the power button is pressed. I need it to work this way so the phone is locked as soon as press the power button and put the phone in my pocket.
Well when i enabled the "trusted devices" feature the screen no longer locks instantly when i press the power button. This is causing my phone to come on in my pocket frequently.
I dont get it. The trusted devices feature is simply supposed to bypass my pattern lock when my Pebble Watch is connected. It is not supposed to stop the phone from locking the screen at all.
Any ideas on how to fix this?
I am having the opposite problem, but maybe I don't understand the settings. I have a pattern password on my device, I have a bluetooth usb in my desktop at home and I have it listed as a trusted device in my BT settings on the phone. When I hit the power button the screen locks but when I go to wake the device (sitting right at my computer the whole time) I get the pattern password screen. I thought it was supposed to bypass that if I set my PC as a trusted device. Any ideas?

Trusted bluetooth device not working?

So I've got a Pebble watch connected and enabled as a trusted bluetooth device but my phone keeps asking for my PIN to unlock it. Same thing happens when I'm connected to my UE Mini Boom speaker which is also enabled as a trusted device.
Any idea why this isn't working for me?
Nevermind. I figured out what the problem is and now I feel dumb. I use a widget for an app called Screen Off and Lock that turns my screen off without my having to hit the power button. The problem is that it also locks my phone even though I'm connected to my Pebble as a trusted bluetooth device. If I hit the power button to turn the screen off, it doesn't lock it and the trusted bluetooth feature works as intended.
Anyone know of a similar app that turns the screen off but does NOT lock the phone?

Categories

Resources