Related
MimiRom V1 Jellybean
Intro
Every rooted user wants to get the last drop of juice from his/her highly overpriced , slim and shiny piece of metal-plastic junk . This 650 mb piece pleases every eye with its jaw dropping performance-power ratio and stable built with no FC's
Presenting MimiRom V1 Jellybean .
FAST - STABLE - DAILY DRIVER - BATTERY FRIENDLY
Features
Based on XELLC Stock firmware from Sammobile
battery friendly as per daily basis
very stable
daily driver
no bugs, lags
removed unwanted bloatwares
zip aligned
de-odexed
rooted by SU chainfire
stock looks, visuals
framework tweaks (modified framework.res )
Touchwiz tweaks (launcher)
added language support
camera app fixed.
320 dpi 326ppl
beats audio :- more in audio section
siyah 1.9.1+
added apps
internal SD card read / speed
cache/dalvix tweaks
fast charge
undervolting underclocking overvolting overclocking supported
changed clock and volt values
network tweaks
volds.fstab tweaks
increased write speed/ read speed for SD card
increased SD card priority over internal
fullscreen frame insta-change support
framerate change support
deep sleep support
enhanced S-voice input
kernal tweaks
FIXES
GS3 sudden death fixed for 0xf1 chips
exynos remote root access fixed
all share cast crash fixed
mediaserver taking insane battery fixed(app priority error)
MMS service fixed
Camera FC fixed
fixed root access in some devices
partially fixed laggy phone/ people app
fixed wifi direct "no device found"
fixed play store crash in low bandwidth
fixed update
fixed settings-device status land crash
fixed wssyncmnlps service insane rom
fixed maps taking unwanted data usage
fixed laggy landscape bodyscreen with S3 stock wallpaper
many more random fixes (too much)
AUDIO MODS
beats audio handler
enhanced audio output
enabled audio chip
crisp audio via bluetooth
reassigned voltage value to audiochip/less battery usage
changed normal equilizer
enhanced audio max vol
increased max audio volume for loudspeakers
default audio sampling tp 44100Khz ( less CPU usage, less battery)
added audio shampoo driver support
siyah audio tweaks
altered rock, jazz, bass boost profiles (use it to ) get it
VISUALS
beats audio bootscreen + sound
project butter framerate lowered (non detectable)
new less ram taking clock
new weather widget
nova launcher
buttery tansition/rotations
fairly battery transitions in powering mode
lowered LED voltages
high blink frequency
low intensity touch button light
AMOLED screen refresh rate to 57 Hz
better visual quality (x-engine from siyah)
APP SUPPORT / MODS
Settigns APK mods
default video player has more codecs now ( mkv dual layer support )
default audio player takes lower battery usage ( sleep audio player mode while running )
high quality audio output ( beats audio driver )
Reverse tethering
USB Mass Storage
Widgets
Over-Under Clocking
EMMC Check
more aggressive stock task manager
zip bootanim support
PERFORMANCE
Overall benchmark performance is lowered ( Antutu score , Quadrant score .. and other synthetic benchmarks ) because of extensive battery saving mods , but these mods wont affect general computing and mobile user experience , UNLESS MORE AGGRESSIVE BATTERY SAVING OPTIONS ARE CHOSEN .
To enter performance mode
1. Disable power saving option from settings
2. Open Set CPU
3. Choose HOTPLUG governor
4.Choose sio I/O scheduler
This will consume more battery .
Highly customized governors
highly customized I/O schedulers
BATTERY SAVING
Various tweaks are already mentioned .
In battery saving mode
Lowered voltages in Audio chip , camera LED , touch buttons , screen , CPU ... upto max permissible limits
Modified Samsung Stock Power Saving mode
User defined power saving from setCPU
Deep Sleep fixed .
Fast Charge in battery saving ( 135 % fast charging )
Undervolted Wifi ( less battery consumption during wifi )
Undervolted Audio play ( Less battery consumption during audio playback )
Many Many Many more battery saving tweaks
DOWNLOADS
in 2nd post
SUPPORT
PM on XDA
www.facebook.com/mi.mee.75
[email protected]
PM on XDA
PM on XDA
ask in comments
PM on XDA
thanks
PM on XDA
HOW TO INSTALL
download
put in external sd
boot into recovery
choose install zip from sd
choose the downloaded zip
" FLASHING"
Done
Reboot
*** WARNING : Backup INTERNAL DATA .. flashing this rom will wipe data !!
Credits
Inigo Lekanda ( emmc check )
d4fseeker and sakaschi ( easy ums )
gokhanmoral ( siyah kernel )
mimi_atmam ( me )
there are many others , but i dont know their names ( ive collected stuff from here and there and thus i dont remember names now ) .. please don't kill me in your minds , just PM me and i'll add you :angel:
DONT FORGET TO THANK
FAQS
How to enable power saving mode ?
Scroll down notification panel , click power saving. Now goto SETCPU . Underclock as per power savings . Chose Powersave governor and deadline io scheduler . I suggest 600mhz ~800mhz Max and 400mhz Minimum
for multitasking chose powersave + sio and keep the max at 700mhz and min at 500 mhz
for playing games of low resolution and low resource requirements.
DOWNLOADS
ROM
https://mega.co.nz/#!Cc0yBbSS!HumcXzckpBjZ2J5b_BmTvS1iZpIjBW610SwS95oEWao
KERNEL
http://d-h.st/6QQ
3 way reboot menu
NOTE : To make it work , copy the downloaded file <android.policy.jar> to system\framework and replace the already available file . You can use ROOT EXPLORER for this
http://d-h.st/Po7
mimi_atmam said:
DOWNLOADS
https://mega.co.nz/#!Cc0yBbSS!HumcXzckpBjZ2J5b_BmTvS1iZpIjBW610SwS95oEWao
Click to expand...
Click to collapse
How do I download the file? Just get the option to 'open' or 'import'. Gonna try this rom when I can
Sent from my GT-I9300 using xda premium
TonyK2005 said:
How do I download the file? Just get the option to 'open' or 'import'. Gonna try this rom when I can
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I uploaded this on some NEW ZEALAND's Cloud drive site .
to download this .. you should have updated java . Use firefox and you will get the DOWNLOAD button .
Accept terms and just click download .
hello
I'll try your rom
a question, because the firmware XELLC?
How do you undervolt your screen?
Hey nice batterytweaks. But may I ask why you chose llc over mc3 or md2?
LentoViolentoMan said:
Hey nice batterytweaks. But may I ask why you chose llc over mc3 or md2?
Click to expand...
Click to collapse
Good question
Choosing llc over the new ones was a bit awkward as people has the notion that latest is the best . But the newer builds mc3 or md2 or the upcoming mds have RPTC ( Resource protocol thread computing ) . this means for every thread ( apps n stuff ) every cycle has to pass a system protocol ( long system permissions mainly XML or java frames ) . This makes the system app thread to take up more ram and cpu usage , eventually giving a battery drain and taking up more cpu power and ram . But on the other hand this provides protection for some bugs ( ex . exynos chip error and partly sudden death ) .
So what i did is took up the older yet most stable built , manually removed the threats which RPTC would remove , tweaked the rom to the MAX and here it is .
The end product is a Sammy rom , giving 16 17 hours of battery backup on 2100 mAH stock battery on normal usage ( 6 hours screen , 3 hours 3g calling , 8 hour audio playback , 2 hour gaming ) with being SUPERSTABLE
Another thing was enabling fastcharge .
fastcharge on newer builds is not stable . for some reason the phone wouldn't accept the extra power being delivered form the usb 3.0 port and ending up getting heated . this would destroy the phone forever , or the battery could explode too ( worst case scenario ) . So to avoid it , took up XELLC ( i personally like this build )
davtse said:
How do you undervolt your screen?
Click to expand...
Click to collapse
Undervolting the screen is not a healthy thing as it can destroy the screen forever , if not done properly .
Undervolting cannot be done on user levels, but while compliling the kernel source and describing the brightness levels , i could be . but that is not exactly undervolting the screen . yeah , you can call it undervolting the screen , indirectly
The only drawback i can see so far is that due to the rom version one can not use the newest versions of jkays framework which is certainly a decision making fact when chosing to install a rom or not. At least for me it is!
Apart from this sounds awesome!
I guess I'll give it a try this weekend to see wheather the other tweaks you provide can make up for it!
Sent from my GT-I9300 using xda app-developers app
userguy said:
The only drawback i can see so far is that due to the rom version one can not use the newest versions of jkays framework which is certainly a decision making fact when chosing to install a rom or not. At least for me it is!
Apart from this sounds awesome!
I guess I'll give it a try this weekend to see wheather the other tweaks you provide can make up for it!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah brother . I know people would be apprehensive about going on this rom because of its older firmware , but try it once .
Will try this!
Latest isn't always the best so perhaps this is for me
Will give it a try thou!
I am trying to download, but after some time I always get a "Network Error" message, I have tried with Chrome and Firefox, but no luck, could you upload it to some other server?
Regards
mimi_atmam said:
Good question
Choosing llc over the new ones was a bit awkward as people has the notion that latest is the best . But the newer builds mc3 or md2 or the upcoming mds have RPTC ( Resource protocol thread computing ) . this means for every thread ( apps n stuff ) every cycle has to pass a system protocol ( long system permissions mainly XML or java frames ) . This makes the system app thread to take up more ram and cpu usage , eventually giving a battery drain and taking up more cpu power and ram . But on the other hand this provides protection for some bugs ( ex . exynos chip error and partly sudden death ) .
So what i did is took up the older yet most stable built , manually removed the threats which RPTC would remove , tweaked the rom to the MAX and here it is .
The end product is a Sammy rom , giving 16 17 hours of battery backup on 2100 mAH stock battery on normal usage ( 6 hours screen , 3 hours 3g calling , 8 hour audio playback , 2 hour gaming ) with being SUPERSTABLE
Another thing was enabling fastcharge .
fastcharge on newer builds is not stable . for some reason the phone wouldn't accept the extra power being delivered form the usb 3.0 port and ending up getting heated . this would destroy the phone forever , or the battery could explode too ( worst case scenario ) . So to avoid it , took up XELLC ( i personally like this build )
Click to expand...
Click to collapse
this is the best reply i've ever had to a question.
however, i did not experience the batteryloss when i first flashed MC2. it was absolutely a relief compared to what we had seen only just before. Maybe it was an illusion but mc2 surely was wicked for the battery, almost like anonorom v23.
edit: flashed the rom and there are rising some painful questions:
what is the samsung account service still doing there?
why is software update service still there?
why the beats bootscreen with sound?
why flipboard?
why beats audio?
why group cast?
why paper artist?
why more services?
etc etc.. i hoped this was kind of a slimmed down rom, but now i've flashed it i have a bit of regret, i don't want to manually remove all the bloatware.
LentoViolentoMan said:
this is the best reply i've ever had to a question.
however, i did not experience the batteryloss when i first flashed MC2. it was absolutely a relief compared to what we had seen only just before. Maybe it was an illusion but mc2 surely was wicked for the battery, almost like anonorom v23.
edit: flashed the rom and there are rising some painful questions:
what is the samsung account service still doing there?
why is software update service still there?
why the beats bootscreen with sound?
why flipboard?
why beats audio?
why group cast?
why paper artist?
why more services?
etc etc.. i hoped this was kind of a slimmed down rom, but now i've flashed it i have a bit of regret, i don't want to manually remove all the bloatware.
Click to expand...
Click to collapse
Partially agree as OP stated
removed unwanted bloatwares
Click to expand...
Click to collapse
, anyhow to remove them it takes 5-10 minutes.
Thanks for the nice snappy rom !!
Cheers.....LinChina
LentoViolentoMan said:
this is the best reply i've ever had to a question.
however, i did not experience the batteryloss when i first flashed MC2. it was absolutely a relief compared to what we had seen only just before. Maybe it was an illusion but mc2 surely was wicked for the battery, almost like anonorom v23.
edit: flashed the rom and there are rising some painful questions:
what is the samsung account service still doing there?
why is software update service still there?
why the beats bootscreen with sound?
why flipboard?
why beats audio?
why group cast?
why paper artist?
why more services?
etc etc.. i hoped this was kind of a slimmed down rom, but now i've flashed it i have a bit of regret, i don't want to manually remove all the bloatware.
Click to expand...
Click to collapse
LinChina said:
Partially agree as OP stated , anyhow to remove them it takes 5-10 minutes.
Thanks for the nice snappy rom !!
Cheers.....LinChina
Click to expand...
Click to collapse
Samsung Account for using SApps . ( SApps have some really good apps only for samsung phones , such as photo editing apps that get embedded in some system options )
Software Update service is tricked and the access points are defined to my server . Means as per your requests ( and many others who might request for some changes ) the service will download updates. BUT ONLY WHEN I HAVE TURNED ON MY SERVER . Dont worry . it wont take neither your data usage , nor your cpu . and for the ram usage , you can surely KILL IT WITH FIRE
Beat Bootscreen , ahem , seriously i was bored of Samsung's Bootscreen as ive been seeing it since the phones from 2009 . Thats why. Sound... its just a 2 second ring . I dont see any wrong in that other than you starting your phone while giving an exam
Flipboard : Because many of us use it . Many NON SAMSUNG phone users download it from the playstore , SO why remove it at all ?
Group CAST : I kept it because many of my friends have GS3 and GS2's . Even my sis has GS2 .. And its a fun app. . Just a 800kb APK , which wont take anything , just a 1x1 icon space unless manually started
BEATS AUDIO : The main reason of using beats audio is that the driver it installs is CUSTOMIZABLE up to many levels . Undervolting the sound chip on stock audio driver gave some FC's . Being a X HTC user , the only solution i found was using beats . And if you are an audiophile , you will see the difference yourself
Paper Artist : The main advantage of using a sammy rom is cuz of its camera app that gives fabulous results. I kept it cuz sometimes , you may want to edit pictures .... Umm just kept it as per DAILY DRIVER basis .
More services ?? Please ELABORATE .
And .. This rom has been tested for 34 days . So , i SHOULD give outputs of a daily driver.
cheveguerra said:
I am trying to download, but after some time I always get a "Network Error" message, I have tried with Chrome and Firefox, but no luck, could you upload it to some other server?
Regards
Click to expand...
Click to collapse
Try it again now . I changed the location
I uploaded here because i couldn't find any other file sharing portals which gives a single 1gb file upload for free users . If you know any such portals , gimme the link and i'll post it there .
Thanks in advance .
LentoViolentoMan said:
this is the best reply i've ever had to a question.
however, i did not experience the batteryloss when i first flashed MC2. it was absolutely a relief compared to what we had seen only just before. Maybe it was an illusion but mc2 surely was wicked for the battery, almost like anonorom v23.
Click to expand...
Click to collapse
Battery Loss would probably start IF YOU USE IT for some time , and you've installed many 3rd party apps and games , and you use 3rd party launchers , widgets , custom clocks , live wallpapers etc .
I am waiting for the new MDS . Its going to be the best FW .
userguy said:
The only drawback i can see so far is that due to the rom version one can not use the newest versions of jkays framework which is certainly a decision making fact when chosing to install a rom or not. At least for me it is!
Apart from this sounds awesome!
I guess I'll give it a try this weekend to see wheather the other tweaks you provide can make up for it!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
jkay fw is now available for this rom .
http://205.196.120.238/3w5mcf3m55gg/r2dt9yhgudt63tv/XXELLC_JKay_Deluxe_Stock_v14_92_1.zip
mimi_atmam said:
jkay fw is now available for this rom .
http://205.196.120.238/3w5mcf3m55gg/r2dt9yhgudt63tv/XXELLC_JKay_Deluxe_Stock_v14_92_1.zip
Click to expand...
Click to collapse
does not work : Confuso:
Code:
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*
This is the successor to my CM12.1 ROM: http://forum.xda-developers.com/mi-note-pro/development/rom-cyanogenmod12-1-t3318450
Unlike other unofficial CyanogenMod builds, these builds are based off of the stable branch instead of the nightly branch.
ROM features:
Based off latest generic Mokee Project M sources
Kernel features:
Based off latest CAF Marshmallow kernel source from Qualcomm (LA.BF64.1.2.2_RB4.06.00.01.180.046)
Removed lots of excessive bloat
Dynamic CPU input boost driver I wrote myself (makes the phone feel smooth without destroying battery life)
F2FS support
No placebo patches, features, or compiler "optimizations"
Many other misc. improvements not listed here
Source code:
Kernel (cm-13.0 branch): https://github.com/nian0114/android_kernel_xiaomi_leo
Credits:
Mokee and its contributors
CAF (aka Qualcomm)
Open GApps
Installation instructions (for first-time installation):
First, perform a backup of your existing setup, and then perform a clean install (wipe /data and /system; TWRP is recommended). Next, try flashing the ROM and see if it installs; if it installs without any issues then congratulations! Now just flash a Google apps package, and then reboot.
Download Link:
http://download.mokeedev.com/?device=leo
What's up with this ROM, it's official but no bugs have been fixed in recent nighties, just same copy paste build with different date and names.
Earlier we didn't have any options other than MIUI and now every non-miui ROM isnt stable or beta-enough to be used as daily driver
I agree with rshahzad17 !
Yvan aosp : Location not working (but GPS working?) , good performances.
Mokee rom: poor performances (Location working but GPS problem ?)
CM13 rom: poor performances + bugs when wake screen (location ok, not tested GPS)
Nian please fix the cpu in your kernel it seem that the a57 cores of the snapdragon 810 are totally disabled and the a53 cores are downclocked to 960mhz max... heavy tasks are slow :'( also the GPU seem to be set to 180mhz max.. yea at least the phone is very cold.. but...
linpinpin said:
I agree with rshahzad17 !
Yvan aosp : Location not working (but GPS working?) , good performances.
Mokee rom: poor performances (Location working but GPS problem ?)
CM13 rom: poor performances + bugs when wake screen (location ok, not tested GPS)
Nian please fix the cpu in your kernel the a57 cores of the snapdragon 810 are disabled and the a53 cores are downclocked to 960mhz max... heavy tasks are slow... also the GPU seem to be set to 180mhz max.. yea at least the phone is very cold.. but...
Click to expand...
Click to collapse
Yes all of Nain's ROMs have kernel issues, like his 5.1 mokee had all set to max and 6.0.1 mokee set to minimum, then again he locks the CPU clocks unable to be altered with any kernel tool, that is funny actually
yea it's locked it leave us with miui only, but many basics features of android do not work with miui Waiting for new nexus phones...
It's nice to have choice of rom. But I agree, what we have now is loads of non working choice. It would be better to focus on one version and develop it well plus keep it going with regular updates.
Ivan's AOSP 6.6.30 version is almost perfect ! It is incredibly smooth, the battery is great !
The only non-working feature is the GPS though
Sent from my MI NOTE Pro using XDA-Developers mobile app
yea if only there was a way to fix the location problem on yvan rom
ectoplasma22 said:
Ivan's AOSP 6.6.30 version is almost perfect ! It is incredibly smooth, the battery is great !
The only non-working feature is the GPS though
Sent from my MI NOTE Pro using XDA-Developers mobile app
Click to expand...
Click to collapse
and front camera for some person
ectoplasma22 said:
Ivan's AOSP 6.6.30 version is almost perfect ! It is incredibly smooth, the battery is great !
The only non-working feature is the GPS though
Sent from my MI NOTE Pro using XDA-Developers mobile app
Click to expand...
Click to collapse
That's a major non-working feature, and gapps permissions issue is another major issue, so if Ivan released second build without fixing it, than what's the point !!!
I have installed todays nightly, here's my feedback;
GPS/Location working,
Kernel seems fine now, CPU clocks are set to normal and kernel tools can edit them,
Video recording doesn't work for front and rear with stock camera, but I tried Open Camera app and it works all fine,
Facebook FCs as usual and I don't use Snapchat,
Antutu score is 79k which is far better than MIUI 8 dev latest build which is at 54k.
Overall this ROM is going to right direction !!!
rshahzad17 said:
I have installed todays nightly, here's my feedback;
GPS/Location working,
Kernel seems fine now, CPU clocks are set to normal and kernel tools can edit them,
Video recording doesn't work for front and rear with stock camera, but I tried Open Camera app and it works all fine,
Facebook FCs as usual and I don't use Snapchat,
Antutu score is 79k which is far better than MIUI 8 dev latest build which is at 54k.
Overall this ROM is going to right direction !!!
Click to expand...
Click to collapse
Thanks for your feedback!!
Can you tell us if the duration of battery is fine?
How are CPU clocks and which are the normal values?
fobikenobi said:
Thanks for your feedback!!
Can you tell us if the duration of battery is fine?
How are CPU clocks and which are the normal values?
Click to expand...
Click to collapse
I haven't used it for a whole day, so can't tell about the battery, will update about it.
By CPU normal values I meant like in stock rom not like set to max at 920 mhz. Im not expert in it but kernel editor gave me normal min 384 and max 1555 mhz.
nice, it's much better. did you also have a problem with Play store apps sometimes not downloading without to have to relaunch the play stpre ?
linpinpin said:
nice, it's much better. did you also have a problem with Play store apps sometimes not downloading without to have to relaunch the play stpre ?
Click to expand...
Click to collapse
No, I used nano opengapps, and it went flawless !
rshahzad17 said:
No, I used nano opengapps, and it went flawless !
Click to expand...
Click to collapse
No FC's after you install the OpenGapps??
fobikenobi said:
No FC's after you install the OpenGapps??
Click to expand...
Click to collapse
None at all, that gapps issue is with Ivan's ROM not with any other !
rshahzad17 said:
I have installed todays nightly, here's my feedback;
GPS/Location working,
Kernel seems fine now, CPU clocks are set to normal and kernel tools can edit them,
Video recording doesn't work for front and rear with stock camera, but I tried Open Camera app and it works all fine,
Facebook FCs as usual and I don't use Snapchat,
Antutu score is 79k which is far better than MIUI 8 dev latest build which is at 54k.
Overall this ROM is going to right direction !!!
Click to expand...
Click to collapse
I have GPS does not work on the last nightly. More and FC Google play services.
I used nano opengapps too.
yea gps do not work me also so still no usable rom
I'm having a very unusual problem with installing this ROM. I get a screen in Chinese which looks like it wants a password. Have tried several things (including removing the SIM card). Whatever I enter it ends up on another screen with a button which when pressed does nothing. Anyone else have this?? Anyone can translate the text in the attached images?
Hi all.
Compatibility:
Builds starting with r5 compatible with Android Nougat 7.1.1 LineageOS or roms built from LineageOS sources.
Download:
From my webserver choose the Kernel with the most recent version number. Older releases for older Android versions are in the parent directory:
https://kernels.franco-lnx.net/OnePlusX/7.1.1/anyKernel/
or from my Updater app. It's just easier and more convenient:
https://play.google.com/store/apps/details?id=com.franco.kernel
Installation:
Flash the zip in your recovery
or
Auto-flash from Franco Kernel Updater app
Features:
1 - Legendary battery life
2 - Flash & forget
3 - Typical interfaces like display adjustments, sound control, vibration control, and all that boring stuff
4 - Idle power consumption reduced to the absolute minimum (if you have wakelocks from 3rd party apps you're obviously on your own)
5 - Support for FKUpdater's Performance Profiles
6 - Magical support, I'm here every day, checking posts almost hourly, ready to help anytime (well, unless you fail to read the OP, which contains most info you need)
7 - Seemless integration with my app FKUpdater
8 - No crap placebo patches, or "magical" optimizations
9 - Probably more, check my github for all the details - the code speaks for itself
Changelog:
https://kernels.franco-lnx.net/OnePlusX/7.1.1/appfiles/changelog.xml
Source:
https://github.com/franciscofranco/onyx
Follow me on the interwebs
Google+
Twitter
Google+ FK community
https://plus.google.com/u/0/communities/117966512071636110546
Franco Kernel: Manager & Updater demo
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!
Good to see you around here!
Thought I would add more to this and make it useful for a few users.
The reason behind why Mpdecision is disabled by default is due to the fact that it is highly inefficient in the sense that hotplugging on Linux, put simply, sucks. Why? The hotplug acts as a front-end to the scheduler to provide a means of plugging and unplugging cores in exchange for a high amount of latency. This means that even though a core may be plugged, there is a delay of several milliseconds before this is actually processed causing microstutters that are hard to notice, but do disrupt performance. The same can be said for the thermal driver and how it Aries frequencies.
Now that that is over with, I'd just like to thank Franco. My device has never been faster. Even with an undercooked, it is still performing better than ever. Especially love the ZRAM tweaks, and how you properly configured CPU boost. Some people make it way too aggressive... It's the little things, and the huge steps forward in the source code that make your work so great! Best of luck
My apps have been updated to support the One Plus X too, both free and paid apps.
Damn legendery dev with his awesome kernel is here. Thank you!
Wish you're kernel for CM13/14 [emoji1]
Flash it, all fine, better later than never,
Didn't work for me coming from LOS (17/03/02 build) with Boeffla kernel. Wiped cache and dalvik, flashed fk r1 and bootloop. Phone kept returning to the boot splash screen and then straight to recovery. Looking forward to solving. Thanks for now.
Sorry, I was clearly not fully awake when I posted this. I read OxygenOS and interpreted as LineageOS.
Still, I hope someday we can run FK kernel on LOS.
Thanks anyways.
Omg .....Dream come true....Thank you franco
Thanks for the kernel, Franco!
It's a shame that it only supports OOS.
FYI I installed it on Sultan's CM13 and everything works fine except dt2w. The switch in settings does nothing and there is no switch in Kernel Adiutor. I hope that your kernel will be compatible with CM/AOSP based roms in the future.
Edit: Wifi is also not working.
franciscofranco said:
Hi all.
Compatibility:
Builds starting with r1 compatible with OxygenOS or roms built from OxygenOS sources.
Download:
From my webserver:
https://kernels.franco-lnx.net/OnePlusX/6.0.1/anyKernel/
or from my free Updater app:
https://play.google.com/store/apps/details?id=com.franco.kernel.free
Installation:
Flash the zip in your recovery
or
Auto-flash from Franco Kernel Updater Free app
Features:
1 - Legendary battery life
2 - Flash & forget
3 - Typical interfaces like display adjustments, sound control, vibration control, and all that boring stuff
4 - Idle power consumption reduced to the absolute minimum (if you have wakelocks from 3rd party apps you're obviously on your own)
5 - Support for FKUpdater's Performance Profiles
6 - Magical support, I'm here every day, checking posts almost hourly, ready to help anytime (well, unless you fail to read the OP, which contains most info you need)
7 - Seemless integration with my app FKUpdater
8 - No bull**** placebo patches, or "magical" optimizations
9 - Probably more, check my github for all the details - the code speaks for itself
Changelog:
https://kernels.franco-lnx.net/OnePlusX/6.0.1/appfiles/changelog.xml
Source:
https://github.com/franciscofranco/onyx
Google+ FK community
https://plus.google.com/u/0/communities/117966512071636110546
Franco Kernel: Manager & Updater demo
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!
Click to expand...
Click to collapse
shatteringlass said:
Didn't work for me coming from LOS (17/03/02 build) with Boeffla kernel. Wiped cache and dalvik, flashed fk r1 and bootloop. Phone kept returning to the boot splash screen and then straight to recovery. Looking forward to solving. Thanks for now.
Click to expand...
Click to collapse
Read OP's first post again...
Facing heating issue...
Everything else is buttery smooth.
Hello bro i need permission regarding your kernel on one plus x i have ported a one plus x rom and i wanna use it one plus one the kernel is working fine in one plus one( I skipped the device checking and made it work)
would be great if you allow me to use it
Thanks
Why are always 4 cores online?
Edit: Got answered on Franco's twitter
shatteringlass said:
Didn't work for me coming from LOS (17/03/02 build) with Boeffla kernel. Wiped cache and dalvik, flashed fk r1 and bootloop. Phone kept returning to the boot splash screen and then straight to recovery. Looking forward to solving. Thanks for now.
Click to expand...
Click to collapse
Not compatible with LineageOS yet. It's written in the OP.
Kolio_xda said:
Thanks for the kernel, Franco!
It's a shame that it only supports OOS.
FYI I installed it on Sultan's CM13 and everything works fine except dt2w. The switch in settings does nothing and there is no switch in Kernel Adiutor. I hope that your kernel will be compatible with CM/AOSP based roms in the future.
Edit: Wifi is also not working.
Click to expand...
Click to collapse
It won't work on Sultan's, he uses a very specific Kernel with specific changes that only work on his specific rom build.
W!ld said:
Facing heating issue...
Everything else is buttery smooth.
Click to expand...
Click to collapse
There's no heating issue. The device throttles just fine when under stress. I run several CPU stability tests before I push a new Kernel...
Dhairya said:
Hello bro i need permission regarding your kernel on one plus x i have ported a one plus x rom and i wanna use it one plus one the kernel is working fine in one plus one( I skipped the device checking and made it work)
would be great if you allow me to use it
Thanks
Click to expand...
Click to collapse
I don't understand what you're asking. Use what where?
@franciscofranco Thanks for this!
Waiting for LineageOS 14 (and all based ROMs) support. Most people don't really use OxygenOS since it's slow and buggy
Calvin2394 said:
@franciscofranco Thanks for this!
Waiting for LineageOS 14 (and all based ROMs) support. Most people don't really use OxygenOS since it's slow and buggy
Click to expand...
Click to collapse
It's not slow with FK, at all. I made sure of that. There was a specially bad issue that I reported to OP 1 year ago, which makes the device have a gigantic stack of uninterruptible threads after a while on screen off. My record was a load average close to 200, 200, 200 which is insane and destroyed the device's performance. That's fixed on FK. Also all cores are online at all times, there's no need to shut down 2 cores, and mpdecision is disabled so that it doesn't mess with the devices performance.
thanks finally the great franco kernel is here damn really appreciate your work
Something really worth for the OnePlus X after a long time. I have been waiting for this day. Thank you.
franciscofranco said:
It's not slow with FK, at all. I made sure of that. There was a specially bad issue that I reported to OP 1 year ago, which makes the device have a gigantic stack of uninterruptible threads after a while on screen off. My record was a load average close to 200, 200, 200 which is insane and destroyed the device's performance. That's fixed on FK. Also all cores are online at all times, there's no need to shut down 2 cores, and mpdecision is disabled so that it doesn't mess with the devices performance.
Click to expand...
Click to collapse
yeah really i underclocked the cpu to 1957 ghz and input boost enabled to 652mhz, the phone literally flies on oxygen os. Also the antutu score is 55222,literally made my day thanks a lot
One wierd thing though, kernel auditor shows my battery capacity to 3000mah, is it true?? or is it after the kernel, anyways its buttery smooth.. magical
Androidoo said:
yeah really i underclocked the cpu to 1957 ghz and input boost enabled to 652mhz, the phone literally flies on oxygen os. Also the antutu score is 55222,literally made my day thanks a lot
One wierd thing though, kernel auditor shows my battery capacity to 3000mah, is it true?? or is it after the kernel, anyways its buttery smooth.. magical
Click to expand...
Click to collapse
Battery size is 2525mAh.
Hi, I flashed your kernal yesterday, all great and the device is buttery smooth but just one thing I noted. When ever the phone goes into to deep sleep the device doesn't wake up on pressing the power button. Have to restart the phone by long pressing the power button. And I haven't changed anything using the kernal adiutor app, just using your default settings.
Can you kindly guide me if something is wrong from my side. May be if you want a log I'll try to pull out a log tonight.
Thanks alot for your work.
Hi everyone, this is a guide based on my personal tests, which I have the pleasure to share with the whole community, for experienced users and not. Regardless of whether you prefer to use a MIUI stock or a custom ROMs, these are a series of tricks, Tweaks, passages, let's call them what we want, to get the maximum in terms of battery life, without sacrificing performance. First of all, we talk mainly to have the better experience for MIUI and PRINCIPALLY for ROOTED users, and custom ROMs too. No rooted users cannot expect miracles because there are modifications that mainly affect the entire operating system. I also hoped to find the Holy Grail, but unfortunately it still hasn't happened.
Anyway,: If you want to use a MIUI (preferably GLOBAL, I will explain later why this is the case); the first thing I recommend in addition to a backup (just in case), it's a pretty safe Debloat using the complete Saki tool:
https://saki-eu.github.io/XiaomiADBFastbootTools/
After giving our device a nice cleanup from Bloatware (obviously you choose which ones to remove or not, personally I removed almost all of them leaving only Gallery, Phone and Messages without any problem), the best part comes, and that is to apply all the settings for a better user experience in every aspect. The MIUI is obviously not optimized as a custom ROM, so we should do it ourselves. Personally I am a root user, so first of all I flashed Evira Kernel and Magisk (with which I am wonderfully) and put modules that I personally recommend: LKT (or others similar modules), Syconfig Patcher (they are the ones that interest us), but of course the appearance rooting is optional.
But back to optimization; for each application that we will install, we will have to configure its type of activity in the background based on how much you want the app to act in the background. For example, the "MIUI Calculator" app, which I almost never use, will have set "limit app functions", otherwise applications that we will use more often will suffice "MIUI optimization", such as "Youtube", and what more important, for apps for which notification is essential (such as Whatsapp or Gmail), remove the limitations.
But it's not over. Write in the settings menu "change system settings", then a list will open with all the apps we have installed. Clicking on one of them, a menu will open, where clicking on "battery and performance", we will choose whether to put the limitations in the background or not, same speech as before, limit everything that is not necessary, inverse speech obviously goes for app important to us (gmail whats etc), which we will leave free to act in the background.
Still in the "battery and performance" menu, click on "battery optimization" and optimize everything you can, except as usual, the apps you don't want to be limited as in the previous two steps.
Now we can activate the "Battery saving" mode, which will obviously work on the whole system, except for all the apps that we have NOT optimized before. They will absolutely not be touched. (A nice break of *** optimize the MIUI , Doh!)
Remember that at the beginning of the guide I told you "better to focus on the global rather than the ROM developer?" well, using a third-party tool like Kernel auditor (personally I use EX Kernel Manager with which I am wonderfully), in the dashboard the developer rom had higher CPU peaks than the Global.Il that involved higher consumption. And it is a tool like this "Ex Kernel Manager etc" that we will now configure.
Step 1 Configure the Governor.
The mode and the speed with which the processor passes from the maximum frequency to the minimum one is regulated by the so-called * "Governor"
There are more than 100 different types of Governor for kernel, more or less different; but not all Governors are present in the Kernels. In case you are using Evira Kernel, my advice is to set the CPU to the "Alucardsched" Governor which offers an excellent compromise between performance and battery life.
EDIT: Recently tested zzmove gov with Evira Kernel: little performance is lost compared to alucardsched, but the battery benefits. Personally i have chosen profile 3 (ybatex).
Step 2 I / O scheduler
It is precisely a program in the form of an algorithm which, given a set of requests for access to a resource, establishes a temporal order for the execution of such requests, privileging those that respect certain parameters, so as to optimize the access to this resource and thus allow the completion of the desired service / instruction or process. In this case, I recommend setting it to noop or Zen, for an approach closer to the battery.
In the GPU section, if you don't use particularly heavy games, (personally I play every now and then in clash royale and I don't have any kind of lag at all) you can also set up your own governor here, setting one like Powersave, but in any case this is completely subjective .
Once everything is set up, all that remains is to talk about the last aspect,
the Doze.
Originally introduced with Android Marshmallow, it allows applications and various activities in the background to "sleep" when the device is screen off. Of course over time it has been increasingly perfect, which is why: In a Stock MIUI you can afford to download Naptime, Servicely or Greenify if you want (personally I use Nap & Serv) to enhance Doze or hibernation as in the case of Greenify (excluding as always the apps we want to be in the whitelist).
IMPORTANT: different words must be made for Custom ROMs, which being already optimized, and having a definitely more effective Doze than the basic stock, DO NOT NEED third-party apps like Naptime or Greenify. In this case, even setting everything as the guide, notifications will not arrive when the screen is off, except when you unlock the device.
so as far as custom ROMs are concerned, you just need to limit the apps as in the guide, leave in the background those you don't want to be touched, and always remove the optimization for these "important" apps, I always repeat "whatsapp gmail etc". In this way you will be able to activate energy saving quietly, the apps you prefer will not be touched, and you already have a Doze optimized like the rest of the system. The only thing that applies to Custom ROMs, is always to set the Governors as described above.
That's all at last :fingers-crossed:.
Attached here are my screenshots, with 8 hours of SOT, DIVIDED IN THREE DAYS, so sometimes the phone was idle as during the night or at work. With these configurations, in a single day, or in a day and a half, you will easily arrive even at 10 hours of SOT and maybe even beyond. I hope you fell asleep while reading, but I wanted to make a guide (even if long), to explain to those who may not be very practical, some things that can always be useful. A simple "thanks" is always welcome!
Greetings .:good:
Two more things: for more battery saving, u can disable automatic sync in settings menu (so sync when u want), and probably after some rebooting, it is possible that the governors will reset itself to the default one. So I suggest you check it out.
Really thanks for your concern about battery life stuff, and yup indeed on custom ROMs sometimes we can get up to 10hrs SoT without any mod or even a custom kernel (my experience)!
I'm looking forward to see how long the battery will last when we get Android Q update from MI..
AbboodSY said:
Really thanks for your concern about battery life stuff, and yup indeed on custom ROMs sometimes we can get up to 10hrs SoT without any mod or even a custom kernel (my experience)!
I'm looking forward to see how long the battery will last when we get Android Q update from MI..
Click to expand...
Click to collapse
Thank you very much! If I am not mistaken, beyond the various new functions, the "Extreme battery savings" will return. With an adequate optimization, as above (also to be as clear as possible with any type of user), we hope to see many beautiful new performances :fingers-crossed::fingers-crossed:
LionHeart90 said:
If I am not mistaken, beyond the various new functions, the "Extreme battery savings" will return. With an adequate optimization, as above (also to be as clear as possible with any type of user), we hope to see many beautiful new performances :fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
I hope that MIUI 11 will bring some new battery saving techniques as well!
Thanks for the guide, with it you cleared some doubts that I had, I just have a question, for battery/performace Anxiety can be better than Zen? For what I read the past days is an optimized version of Maple wich gives good balance between battery and performance.
:good:
Eddywarez said:
Thanks for the guide, with it you cleared some doubts that I had, I just have a question, for battery/performace Anxiety can be better than Zen? For what I read the past days is an optimized version of Maple wich gives good balance between battery and performance.
:good:
Click to expand...
Click to collapse
Thanks bro; Zen and Anxiety are so similar as they are also different. Each I/O scheduler we choose can be the most indicated according to what we do with our device. Let me clarify: Anxiety is better in term of battery saving comparing with Maple, "It prioritizes reads over writes but tends to starve writes more".
Zen is based on noop and deadline, very stable and have a great balance, for this reason i choose it. But as mentioned there are no schedulers better than others. But better according to our needs. My advice is to try them both, and see how you are in your daily use of the device :fingers-crossed::fingers-crossed:
LionHeart90 said:
Thanks bro; Zen and Anxiety are so similar as they are also different. Each I/O scheduler we choose can be the most indicated according to what we do with our device. Let me clarify: Anxiety is better in term of battery saving comparing with Maple, "It prioritizes reads over writes but tends to starve writes more".
Zen is based on noop and deadline, very stable and have a great balance, for this reason i choose it. But as mentioned there are no schedulers better than others. But better according to our needs. My advice is to try them both, and see how you are in your daily use of the device :fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Thanks for your answer and your work.
:good:
Battery life is not the only thing I look for. Stock rom batter life is good enough after debloat in many crapps using saki. Stability, functionalities, security.. overall stock rom is the way to go for me at the moment. Did you mention restricting permission on apps?
Welp, after playing Free Fire for 1:20:00 and PUBG for 4:00:00, a little Browsing, my battery usage was of 76%, I don't use LKT because last time I try it my wifi started working weird, only use Snaptime. Evira 2.2.
:good:
I would like to know what do you think about zzmove governor that was added in Evira 2.3. Thanks.
I tried to use your settings but at reboot all configuration change to interactive or schedutil for CPU, msm-adreno-tz for GPU e anxiety for Scheduler I/O. I guess there are some conflicts with LTK.... I don't kwow how you have 8 hours of screen on your device...
Eddywarez said:
Welp, after playing Free Fire for 1:20:00 and PUBG for 4:00:00, a little Browsing, my battery usage was of 76%, I don't use LKT because last time I try it my wifi started working weird, only use Snaptime. Evira 2.2.
:good:
I would like to know what do you think about zzmove governor that was added in Evira 2.3. Thanks.
Click to expand...
Click to collapse
Sure bro, i just flashed it few minutes ago. After a complete recharge cycle, ill tell u my opinion :highfive:
empedocle86 said:
I tried to use your settings but at reboot all configuration change to interactive or schedutil for CPU, msm-adreno-tz for GPU e anxiety for Scheduler I/O. I guess there are some conflicts with LTK.... I don't kwow how you have 8 hours of screen on your device...
Click to expand...
Click to collapse
Mate, if u read with more attention, i wrote about it in my second post..
Just reconfig Governor already. It could be happen, is normal
Im going to test darknesssched with zen without sysconfig patcher (Had mobile data connection issues), alucardsched give me a little lag in PUBG, when I use darknesssched that dont happen, zzmoove dont convince me, it is based in conservative and hasnt been updated since 2015, for what I know cpu governors schedutil based are more "smart".
:good:
Nice guide, bro :fingers-crossed:
@LionHeart90 thanks for your useful guide!
just a curiosity, you dont use miui? from your screenshot you have a aosp rom?
iaio72 said:
@LionHeart90 thanks for your useful guide!
just a curiosity, you dont use miui? from your screenshot you have a aosp rom?
Click to expand...
Click to collapse
Yes man, i use the MIUI 10.3.3.0 If u see, the 2 screenshots about battery life have been taken from it :cyclops:
MIUI 10.3.3.0 instead of latest 10.3.5.0?
iaio72 said:
MIUI 10.3.3.0 instead of latest 10.3.5.0?
Click to expand...
Click to collapse
Yep
Hm, i am locked...and have no kernels installed. And I'm not planing to do it.
Did restrictions and debloat and this is what I get.
Since I am on 10.3.5. my battery is weaker..
On 10.2.7 I had 2 sims with lousy signal, and I was having about 7,8 h of sot and same use.
Now before this tweaks I was hardly getting 5h in 24h
Yesterday I had weaker use then ussual but still, this isn't very good..but I think it is better.
I dont like this 10.3.5.
Spoiler
Sent from my Redmi Note 7 using Tapatalk
str8str said:
Can I get a link to try this? Tia
Click to expand...
Click to collapse
Updated 7/31/2021 rebased on Acuicultor's v2.2.5 rebase (OOS) and rebase_custom (custom ROMs).
[NOTE: Bug reported - with a Magisk Module I created to fix it. For some strange reason (code looks fine), some systems are setting the default GPU frequency to 920mhz and default power level to 0 (max). I have posted a small Magisk Module that waits 5 seconds then corrects these values (295mhz default and power level 8). It's on the GitHub release page - MOD-GPU-Set-Min-Freq.zip. Just install with Magisk Manager as a module / install from storage after downloading.]
This is a tweaked version of RadioActive kernel by acuicultor modded for higher performance and lower idle drain. All source commits and releases are on my GitHub fork:
https://github.com/mrslezak/Radioactive_kernel_oneplus8/releases/tag/v2.2.5-MOD
PLEASE read the Readme as well as the disclaimer. Whenever you flash a custom kernel, you do so at your own risk. I recently rebased on the dev's work (GPU_OC OOS branch, never released) and set the wakelock blocks up myself (lower idle drain, tested over a week with no loss in functionality), dropped the base GPU frequency to 295mhz and raised the top ones (800/920mhz) acuicultor you're an awesome dev, great to have you around! All credits should go to him other than my tweaks.
I also merged all the same changes into the Custom ROM branch which didn't have GPUOC or AdrenoBoost - several people are using it now but it's marked as a BETA since I am on OOS (latest Global) and can't test it myself. NOTE: many people on the TG channel I posted to have tried it and have had no issues on Op8, Op8 Pro, and Op8T.
Note if you are one of the rare people who see artifacts in games or benches, the easiest fix is to go into your kernel manager and set the max GPU frequency to 800mhz and apply on boot. Not all 865 Adreno GPUs are created equal. I haven't seen one that couldn't handle 900mhz to date, but enough people have had no issues at 920mhz so that's where I put it.
Be sure to flash Magisk before installing, then use EX Kernel Manager or FK Kernel Manager to Flash the kernel zip. It has all the same optimizations of RadioActive kernel, just modded for really nice performance and low battery drain. Adreno Boost is set to low on default which makes it react faster as the GPU scales. If you already have Magisk installed, there is no reason to reinstall it - the AnyKernel 3 zip installer will use what's installed already.
I put one out there you can just flash from: fastboot flash boot 4.19.110.RadioActive-WL-295_UC-920-GPU-2.2.5.img (OOS only) as it saved my a$$ a couple times when flashing or trying to apply an incremental update when rooted (no success, although I posted the incremental update on TG, the payload just won't extract properly to update using fastbootd scripts)... Maybe I'll post it here on XDA and see if anyone can extract the latest Op8T update.
Also someone sent me a PM about using KonaBess app to change frequencies even more, or change regulators, or change the DDR clock speeds. Yes, it works. Note you probably should only play with that if you have a fastboot image available in case it doesn't boot! I did just upload one for OOS to the repo as I mentioned above. Be warned, you're on your own there.
Hope you all enjoy!
- MattOfTheDead / Red Magic 5G MOD kernel (Q) / Xiaomi Mi9 / Mi9T Pro MOD kernels (Pie/Q) / next in line is probably a 2022 device - 888s didn't make the cut
mslezak said:
Join the Telegram group called OnePlus 8 | 8T Series and you'll find that and my modded versions there as well. Just search for 920 the latest one will pop right up. Actually about to rebase on the dev's excellent work and set the wakelock blocks up myself, dropping the base frequency and raising the top one. acuicultor you're an awesome dev, great to have you aboard! - MattOfTheDead / Red Magic 5G MOD kernel (Q) / Xiaomi Mi9 / Mi9T Pro MOD kernels (Pie/Q) / next in line is probably a Realme GT.
Click to expand...
Click to collapse
Kernel for custom A11 or OOS only?
jamescable said:
Kernel for custom A11 or OOS only?
Click to expand...
Click to collapse
I built both just moved some commits over from the GPU_OC branch and added my own to custom. I have no way to test it but several others did already. All I've heard is great feedback and running faster than OOS. Of course it depends on the ROM.
mslezak said:
I just built the OOS one... custom I don't think there's a GPU_OC branch to rebase on. I deleted my other repo with changes and just switched to the dev's work since it was nicely done. I'm always running OOS I don't really care to run a custom ROM. Although I imagine it would be pretty easy to add his commits from the OC branch to the custom one, you never know what issues you'll encounter when doing so... And I don't really feel like building a kernel I won't use. I already converted it over from a carrier locked phone. Happy enough it runs on Global OOS ROM. I've run a few custom ROMs before like Lineage, Evolution-X, I always end up back on OOS. Just like having a fast phone with no lag where I can open any number of apps and get work done quickly without waiting for anything to load.
Click to expand...
Click to collapse
Thanks for this man. Will be looking for your kernel edit on telegram.
jamescable said:
Custom kernel for A11 or OOS only?
Click to expand...
Click to collapse
mslezak said:
I just built the OOS one... custom I don't think there's a GPU_OC branch to rebase on. I deleted my other repo with changes and just switched to the dev's work since it was nicely done. I'm always running OOS I don't really care to run a custom ROM. Although I imagine it would be pretty easy to add his commits from the OC branch to the custom one, you never know what issues you'll encounter when doing so... And I don't really feel like building a kernel I won't use. I already converted it over from a carrier locked phone. Happy enough it runs on Global OOS ROM. I've run a few custom ROMs before like Lineage, Evolution-X, I always end up back on OOS. Just like having a fast phone with no lag where I can open any number of apps and get work done quickly without waiting for anything to load.
Click to expand...
Click to collapse
I mainly wanted the wakeloxk blockers, and other battery saver stuff lol. Don't care about OC
jamescable said:
I mainly wanted the wakeloxk blockers, and other battery saver stuff lol. Don't care about OC
Click to expand...
Click to collapse
You can also underclock.
str8str said:
Can I get a link to try this? Tia
Click to expand...
Click to collapse
Release Radioactive Kernel V2.1.4 OOS Op8/Pro/8T Modded (+Custom BETA) · mrslezak/Radioactive_kernel_oneplus8
GPU underclocked to 295 base frequency, overclocked to 670/800/920mhz. Default Boeffla Wakelocks blocked to reduce idle battery drain. Default Adreno Boost set to low. A personal build based on ...
github.com
Just anyone who uses the modded kernels please read the disclaimer first. Readme on GitHub and releases page.
Modded Custom BETA is out with the same features of the OOS kernel in the post above. 295/800/920Mhz GPU, Adreno Boost with Low default, default Wakelock block list. Go to the same location to download if you'd like to try it out. And please, please read the DISCLAIMER there. Whenever you flash a kernel, you do so at your own risk. I am liable for nothing. If you want to see what I changed, switch to the custom branch. So far I have 5 people that have said "it's awesome" on Telegram, no issues reported as of yet.
Release Radioactive Kernel V2.1.4 OOS Op8/Pro/8T Modded (+Custom BETA) · mrslezak/Radioactive_kernel_oneplus8
GPU underclocked to 295 base frequency, overclocked to 670/800/920mhz. Default Boeffla Wakelocks blocked to reduce idle battery drain. Default Adreno Boost set to low. A personal build based on ...
github.com
mslezak said:
Modded Custom BETA is out with the same features of the OOS kernel in the post above. 295/800/920Mhz GPU, Adreno Boost with Low default, default Wakelock block list. Go to the same location to download if you'd like to try it out. And please, please read the DISCLAIMER there. Whenever you flash a kernel, you do so at your own risk. I am liable for nothing. If you want to see what I changed, switch to the custom branch.
Release Radioactive Kernel V2.1.4 OOS Op8/Pro/8T Modded (+Custom BETA) · mrslezak/Radioactive_kernel_oneplus8
GPU underclocked to 295 base frequency, overclocked to 670/800/920mhz. Default Boeffla Wakelocks blocked to reduce idle battery drain. Default Adreno Boost set to low. A personal build based on ...
github.com
Click to expand...
Click to collapse
RadioActive-WL-295-920GPU-custom-2.1.4-BETA.zip is the file for custom ROMs BTW if you don't read the notes (which you should). As I mentioned to the unhappy user you can always drop the max GPU in any kernel manager to 800mhz and set on boot if you got an inferior 865 although artifacts have only been reported by 1 person period. A more productive approach rather than bad mouthing someone trying to provide a free service is "can you build a version that maxes out at 900mhz?"... Respect please in the forums.
jamescable said:
I mainly wanted the wakeloxk blockers, and other battery saver stuff lol. Don't care about OC
Click to expand...
Click to collapse
Well I put up custom and OOS just use a kernel manager to set the high frequency you want it to stop at on boot. But before you do, here's a day of basically using the phone a lot at 120hz with many apps open. Note someone here didn't look at the SOT DRAIN which is 100/8.27 = 12hrs SOT. I didn't start it with a full battery. I do that on purpose start at 60% or so to see how it drains in the middle of the discharge. So I'd advise those that are quick to criticize, make sure you actually calculate something before saying it's "horrible" when it's as good as stock.
mslezak said:
Well I put up custom and OOS just use a kernel manager to set the high frequency you want it to stop at on boot. But before you do, here's a day of basically using the phone a lot at 120hz
Click to expand...
Click to collapse
That's horrible, considering auto gives me 9-12 hours screen on time, depending on what I am doing obviously
jamescable said:
That's horrible, considering auto gives me 9-12 hours screen on time, depending on what I am doing obviously
Click to expand...
Click to collapse
What is your setup I can only dream of these nos
jamescable said:
That's horrible, considering auto gives me 9-12 hours screen on time, depending on what I am doing obviously
Click to expand...
Click to collapse
You do realize that this is 12 SOT if you never let it sleep and use it all the time, look at the stats and do some math. 100%/8.27% = 12hrs SOT. Idle went up because I was on phone calls for an hour, and the screen turns off. It's usually 0.6%/hr if you're using it (on WiFi), 1%/hr on cell, turning it on and off every few minutes will cause more drain. I was using my phone a lot today that way. I would say that's amazing to get the same SOT on a modded kernel. I haven't optimized a thing in the ROM or notifications, just used the kernel. I don't care if you use it, do as you wish.
The best way to get help, or to find me is on the TG group. There are people there that can help you out if need be.
mslezak said:
You do realize that this is 12 SOT if you never let it sleep and use it all the time, look at the stats and do some math. 100%/8.27% = 12hrs SOT. Idle went up because I was on phone calls for an hour, and the screen turns off. It's usually 0.6%/hr if you're not using it, turning it on and off every few minutes. I was using my phone a lot today that way. I would say that's amazing to get the same SOT on a modded kernel. I haven't optimized a thing in the ROM or notifications, just used the kernel. I don't care if you use it, do as you wish.
Click to expand...
Click to collapse
mslezak said:
Anyway I'm tired of people requesting things and then getting completely incorrect information and yelling at me because they either can't do math or they don't know how to use a kernel manager. I can be reached on the TG group but you all are on your own now. All I hear are complaints for doing free work for people I don't even know, some of you need to learn some manners.
Click to expand...
Click to collapse
Ignore the haters and complainers...
I just flashed (RadioActive-WL-295-920GPU-custom-2.1.4-BETA.zip) over CR_Droid (CR 03/08 and 03/26 builds 8Pro) and it made a HUGE difference in smoothness, snappiness and performance. I don't worry too much about battery drain as we can top off our phones in less than 20 minutes a day. The under-clocking is also wonderful. I remember back in the G2 days we not only underclock, but would under-volt ALL the frequencies just a few ticks away from unstable for more battery life (dependent on the cpu bin ver), but not really that necessary anymore with larger batteries and super quick charges.
Much respect and appreciation and hope to see more tweaks and builds in the future
Agimax said:
Ignore the haters and complainers...
I just flashed (RadioActive-WL-295-920GPU-custom-2.1.4-BETA.zip) over CR_Droid (CR 03/08 and 03/26 builds 8Pro) and it made a HUGE difference in smoothness, snappiness and performance. I don't worry too much about battery drain as we can top off our phones in less than 20 minutes a day. The under-clocking is also wonderful. I remember back in the G2 days we not only underclock, but would under-volt ALL the frequencies just a few ticks away from unstable for more battery life (dependent on the cpu bin ver), but not really that necessary anymore with larger batteries and super quick charges.
Much respect and appreciation and hope to see more tweaks and builds in the future
Click to expand...
Click to collapse
Thanks bud, glad to hear good results with the kernel. On TG everyone has been full of compliments. Let's hope it stays that way here as well. We can conduct everything in a respectable manner.
Now if you REALLY want to save battery and your cell provider supports Voice over WiFi, Google Messages enable enhanced chat features and keep it on WiFi only (i.e. Bluetooth only on while you're using it, Location off unless you're navigating somewhere, NFC off unless you're using GPay, mobile data off), here's what I get being on my phone all day today (started under 60% battery) at 120hz: 7% active drain, 0.84% inactive. If you're asleep it's more like 0.4%. You won't miss any calls or texts either.
great, zero! drain during the bedtime that's awsome! thanks for the kernel upgrade