voLTE on almost any custom rom - Xiaomi Redmi 2 Guides, News, & Discussion

this is gonna my first thread on xda so please ignore my mistakes
how to get voLTE on any LP and MM based custom rom
so here it goes
1.first flash lollipop miui based rom by fastboot or by recovery. By this you will get lollipop bootloader
i used fastboot rom whose link is given below
http://bigota.d.miui.com/V8.0.7.0.L...DG_20160805.0000.29_5.1_global_3f4aae40dd.tgz
2.now flash any custom rom on which you want voLTE.(self tested on cm13 offical and mokee 6.0)
after flashing rom (jio must be in sim1)
preferred recovery-
http://forum.xda-developers.com/red...ery-built-source-inside-t3277621/post64463515
3.create a access point of details shown in pic
name- ims
apn- ims
apn type- ims
and assure that enhance 4G connectivity option is ON in your sim setting
credits -shubh chaan

still don't understood...???
Sent from my 2014811 using Tapatalk

It is working! Thanks

thanks bro... it's working on nexus rom and also on mokee

Related

[UNIVERSAL]VoLTE Patch v2 for All Android N Roms [Updated: 2.1.17]

What is this?
This is a patch for Kenzo by which you will get volte on any nougat rom (non volte) out there.
Disclaimer:
If you want to add this patch to your rom, please give proper credits and link this thread too.
If you like this, press that thanx button. If you use this, consider donation. :victory:
Requirement:
Redmi note 3 on any rom
Unlocked and with TWRP recovery
VoLTE v3 patch 25-01-17
Instructions:
Clean flash
1. Download any non volte rom
2. Download v3 patch
3. Flash the rom according to instructions provided on rom thread
4. Flash firmware 15-11-16 Credits Newer firmware? Try and report. :good:
5. In the end flash v3 patch
6. Reboot.
Dirty Flash OTA
Flash your rom's ota as you do(without wiping system), no need to flash patch again. It will be auto applied after every dirty flash.
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- It may.
2. Does volte works on second sim?
A- Not tested but should work.
3. Is there or going to be any patch for Marshmallow based roms?
A- Yes. Go here
4. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
5. Everything above said is checked, still no VoLTE?
A- Check v2 guide and also post #3.
Donations:
Thanx for your kind donations, it helps.
Send me a pm if you have donated, if you want to join telegram group for close testing and support. :highfive:
NVDX11, 99xxxx3869, 97xxxx1652, 94xxxx8709 (AmolAmrit), 89xxxx6581 (hemant_jeengar), 77xxxx8388, 88xxxx9810, 90xxxx4024, 86xxxx0406, 89xxxx8858, 88xxxx9810, asrupesh, 73xxxx6596, MakDroid, BabyTedhu, 95xxxx7623 (vk82119), 81xxxx4723, 73xxxx3906, 88xxxx0101, Pancha5
Credits:
TheStrix
abhishek987
Santhosh M
Telegram Channel for faster ETA's, Changlog: Channel
XDA:DevDB Information
VoLTE Patch Nougat, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Sudeep Duhoon
Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2016-12-31
Created 2016-11-29
Last Updated 2017-01-25
Changelog and v1 beta patch (old)
Change-log:
25-01-17 v3 released Might be last
Based on TheStrix Commits
13-01-17
Updated with newer files
31-12-16 v2 released
Only 1 zip needed now instead of 2
Universal for nougat
OTA support
64k sim support, no force close
Auto patch, no manual build.prop editing
Reduced size a lot
Don't touce framework-res.apk
Old v2 guide
What is this?
This is a patch for Kenzo by which you will get volte on any nougat rom (non volte) out there.
Disclaimer:
If you want to add this patch to your rom, please give proper credits and link this thread too.
If you like this, press that thanx button. If you use this, consider donation. :victory:
Requirement:
Redmi note 3 on any nougat volte enabled rom (read FAQ #5 too)
Unlocked and with TWRP recovery
VoLTE v2 patch 31-12-16
VoLTE v2 patch 13-01-17
Instructions:
Clean flash
1. Download any non volte rom
2. Download v2 patch
3. Flash the rom according to instructions provided on rom thread
4. In the end flash v2 patch
5. Reboot.
Dirty Flash OTA
Flash your rom's ota as you do(without wiping system), no need to flash patch again. It will be auto applied after every dirty flash.
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- No!
2. Does volte works on second sim?
A- Not tested but should work.
3. Is there or going to be any patch for Marshmallow based roms?
A- Yes. Go here
4. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
5. Everything above said is checked, still no VoLTE?
A- Check post #3.
Donations:
Thanx for your kind donations, it helps.
Send me a pm if you have donated, if you want to join telegram group for close testing and support. :highfive:
NVDX11, 99xxxx3869, 97xxxx1652, 94xxxx8709 (AmolAmrit), 89xxxx6581 (hemant_jeengar), 77xxxx8388, 88xxxx9810, 90xxxx4024, 86xxxx0406, 89xxxx8858, 88xxxx9810, asrupesh, 73xxxx6596, MakDroid, BabyTedhu, 95xxxx7623 (vk82119), 81xxxx4723, 73xxxx3906, 88xxxx0101, Pancha5
Credits:
abhishek987
TheStrix
Santhosh M
Telegram Channel for faster ETA's, Changlog: Channel
Old v1 guide
What is VoLTE​
Requirement:
Redmi note 3 on Working VoLTE Nougat rom
Unlocked and with TWRP recovery
Instructions:
Auto (Limited):
1. Download Rom from respective thread and follow the instructions given there to flash it.
2. Download the "volte.zip" and "volte_ROMNAME_BUILDDATE.zip" from here. (check the rom name and build date correctly before flashing)
3. Flash "volte_ROMNAME_BUILDDATE.zip"
4. Flash "volte.zip"
5. Wipe cache and dalvik.
6. Reboot. Done!
Notes:
(i) Volte.zip is common for all roms, other rom specific zips will be based on rom name and their build date. This is done to reduce the bandwidth required to download patches.
(ii) If volte not working then download abhishek's firmware from here and flash it. Thanx to xenolith190 for pointing this out.
Manually (No limits):
Additional requirement: A PC with windows (can be done on android too but not included in this tutorial)
1. Download and flash the rom according to the instruction provided on rom's thread.
2. Download apktool and extract/setup in your pc.
3. Use File explorer inTWRP and copy /system/framework/framework-res.apk to /sdcard
4. Connect phone to pc and copy/move framework-res.apk to apktool directory.
5. Open cmd and cd to your apktool dir. And type following commands:
Code:
apktool if framework-res.apk
apktool d framework-res.apk
6. Open to /res/values/bool.xml in text editor (i use notepad++) and change these values to true
Code:
<bool name="config_device_volte_available">true</bool>
<bool name="config_carrier_volte_available">true</bool>
7. Type
Code:
apktool b framework-res
to build apk back.
8. Open new framework-res.apk from apktool/framework-res/dist folder and old framework-res.apk from apktool folder using a zip software like winrar.
9. Drag and copy AndroidManifest.xml and META-INF from old to new apk.
10. Same way drag this new apk to any of the rom specific zip available on this thread and flash as instructed.
NOTES: You need to edit bool.xml in framework-res.apk to enable volte option in rom. Rest of the required libs and files are present in volte.zip and is common for all roms. This tutorial may become more detailed, it completely depends on free time i get. I will not answer any question regarding this in personal messages. If you edit any rom's framework-res.apk please mention me and add that in this thread and i will add you to the op as contributor so you can maintain that rom's future builds too.
Thank you for understanding.
Downloads: HERE
From now on patches will be added here (XDA ERROR:Missing or incorrect project information.)
1. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 20-12-2016
2. [UNOFFICIAL] ResurrectionRemix CK FPC 5.8.0 [OTA/OMS] - 23-12-2016 NOT WORKING (send me framework-res.apk)
3. Mokee 201612230813-NIGHTLY
4. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 23-12-2016
5. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 26-12-2016
Community built patches:
Patch for cosmic os 1st december 2016 build by xenolith190
Patch for BeanStalk 7.1.1 by contactwajeeh
Patch for 08th December Nightly AICP by gulshanstrider
Patch for 08th December nightly AICP by contactwajeeh
Patch for CM Official Nightly's by contactwajeeh
Patch for AOKP 9/12 Build by NVDX11
Patch for CleanRom 9th december 2016 build by xenolith190
Patch for official cm 14.1 nightly 10.12.16 by sarveshrulz
Patch for Cr droid 1.5 by vk82119
Patch for aicp 11th dec build by Sumit Samanta
Patch for aicp 12th dec build by Sumit Samanta
Patch for official cm 14.1 13-12-16 build by ashokumar257
Patch for official cm 14.1 15-12-16 build by ashokumar257
Patch for AICP 19th December build by gulshanstrider
Patch for NucleaRom build by sohail0098
Done:
CM
crDroid 7.1
XenonHD
CM14.1 (TheStrix)
Lineage os by @Infinity
AOSP/CAF
CleanRom
AOSPExtended
halogenOS 7.0
Aoscp 3.1.2
CitrusCAF-kenzo-2.2-LemonDrop-OFFICIAL-20161129 Supports Volte now
AICP Build date 29th October Thanx to skandhan for sending the file
AICP Build date 11th November Thanx to fosterqaz11 for sending the file
Cosmic-OS v1.1
ZephyrOS-7.0-20161130-Viersion-V6.1
Slim7
Mokee 201612110653-NIGHTLY
Mokee 201612230813-NIGHTLY
All requested roms done, for more, please request. If you can link of the thread of requested rom, it will be great.
To Do:
Send rom's framework-res.apk in PM, google drive preferred.
Testing:
NOTE:These are test patches and unlikely to work. You might get a bootloop.
Official CM13 Patch Download Working chances 60%
Resurrection Remix 5.7.4 Patch Download Working chances 5%
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- No!
2. Does volte works on second sim?
A- Not tested, tested with jio sim in first slot, works fine.
3. Is there or going to be any patch for Marshmallow based roms?
A- Test Patches are added, if anyone wants to try.
4. Marshmallow patches are not working?
A- Send me logcat.
5. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
6. I got com.android.phone force close what should i do?
A- Clean flash the Rom or wait for the fix.
7. Everything above said is checked, still no VoLTE?
A- Check if you have set correct APN for particular sim card and if still VoLTE is not working send me logs.
8. No Audio in calls.
A- Use any root explorer and edit build.prop to change ro.qc.sdk.audio.fluencetype=fluence to ro.qc.sdk.audio.fluencetype=none. Save, set correct permissions and reboot.
9. Got Bootloop on CM Nightly or any other newer rom
A- Decompiling and recompiling alone, without making any changes to framework-res.apk in these roms are causing bootloops, must be issue with apktool/rom. Can't do anything.
XDA:DevDB Information
N Roms VoLTE Patches, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Sudeep Duhoon
Santhosh M
TheStrix
Akhil Narang
gulshanstrider
contactwajeeh
xenolith190
NVDX11
sarveshrulz
vk82119
Sumit Samanta
Version Information
Status: Beta
Created 2016-11-29
Last Updated 2016-12-30
How to get VoLTE for the first time
Things needed: (things with * is needed for unofficially unlocked device)
1. Redmi note 3 on any rom
2. TWRP recovery
3. A PC with working internet connection
4. USB Cable
5. Mi Unlocker tool (google)
6. Mi Flash tools (google)
7. Any miui fastboot rom, build previous to 6.11.15 build (i use 6.11.3)
8. CM VoLTE by abhishek987
*emmc_aboot (which you used to unlock officially)
*boot.img_patcher.zip
*lazyflasher.zip
Instruction: (steps with * is needed for unofficially unlocked device)
1. Extract miui rom and replace TWRP with recovery.img. *replace emmc_aboot too if unofficially unlocked
2. Reboot device to fastboot and connect it to pc
3. Install/open Mi flash tools and browse to extracted rom's dir
4. Click Flash (your internal storage my get wipes)
5. Monitor the process and when it is near to end keep volume down button pressed
6. Phone will restart to fastboot and use Mi unlocker tool to unlock your bootloader as it may have been relocked *use fastboot command fastboot oem device-info to check status and if locked then use fastboot oem unlock-go to unlock bootloader.
7. Press and hold volume up+power to reboot to twrp
8. Use file manager to check if data is wiped or not, if not the wipe data (not internal sd), wipe cache too *flash lazyflashed and bootimg patcher
9. Reboot and complete initial setup
10. Once you get VoLTE symbol on status bar try to call someone and then reboot to recovery
11. Backup EFS and adspso
12. Flash CM VoLTE according to details provided on thread (skip any custom kernel, gapps, etc)
13. Reboot to check VoLTE working, if not reboot to recovery and restore EFS
14. Once volte gets working, follow post #1 to flash any non volte rom.
is there a link?
42o247 said:
is there a link?
Click to expand...
Click to collapse
seems NO :silly:
Reallyyyy
We can make volte work on non volte roms...!!!!....thats cooolllll
wow you both were fast. still editing. lol
ps. adding link first, will edit later
great...volte for every rom...
Haha... Bro i am waiting add link fast
Link link link.....i cant waitttt
Link plz....
kiran G. said:
Reallyyyy
We can make volte work on non volte roms...!!!!....thats cooolllll
Click to expand...
Click to collapse
BRoy_98 said:
seems NO :silly:
Click to expand...
Click to collapse
42o247 said:
is there a link?
Click to expand...
Click to collapse
silentkiller88 said:
Haha... Bro i am waiting add link fast
Click to expand...
Click to collapse
kiran G. said:
Link link link.....i cant waitttt
Click to expand...
Click to collapse
megatron0110 said:
Link plz....
Click to expand...
Click to collapse
link up for crDroid.
Sudeep Duhoon said:
is there a link?
Haha... Bro i am waiting add link fast
link up for crDroid.
Click to expand...
Click to collapse
For resurrectionRemix?
megatron0110 said:
For resurrectionRemix?
Click to expand...
Click to collapse
it already has volte
Y is it named as crdroid...???....does this work only on crdroid...???
kiran G. said:
Y is it named as crdroid...???....does this work only on crdroid...???
Click to expand...
Click to collapse
yes. only for crDroid. I am uploading XenonHD and CM14.1 fix as well. Slow connection, i need some time.
Sudeep Duhoon said:
yes. only for crDroid. I am uploading XenonHD and CM14.1 fix as well. Slow connection, i need some time.
Click to expand...
Click to collapse
Any screenshot of crdroid ROM that volte is working ?
A Request to OP. Please make a patch for any 7.0 based Rom with OMS commits so that we can enjoy substratum also.
There are many cm14.1 Roms out there but none of them has substratum support
Please make a patch for a ROM with OMS commits
only for crdroid rom?
Can I use this in RR 7.4?

Volte/JIO 4G supporting ROMs

1.. Orion OS
2. Zephyr OS
3. HTC Remix ver 3(however it doesn't)
4. Resurrection Remix 5.7.4 (Latest Build works)
5. Tesla ROM (Android N)
6. AICP (Android N)
7. Cardinal AOSP ( Android N)
8. Dirty Unicorn v11.0 (Android N)
Steps to make Volte work
1. Download http://bigota.d.miui.com/V8.0.7.0.LHJMIDG/wt88047_pro_global_images_V8.0.7.0.LHJMIDG_20160805.0000.29_5.1_global_3f4aae40dd.tgz.
2. Extract the .tgz file.
3. Reboot your phone to bootloader/fastboot by clicking the power button and Vol down button simultaneously.
4. Open the extracted folder and click on "flash_all_except_data_storage.bat"(Run As Administrator).
5. Let the phone boot up (it can take upto 10 minutes)
6. Reboot to Custom Recovery like TWRP 3.0.2-0 for Redmi 2.
7. Now clear /system /data/ cache /Dalvik/ART Cache.
8. Now flash the custom ROM
9. Boot the custom ROM and skip the setup wizard (if you like) and go to Settings>SIM cards>Mobile Data. Select Jio 4G.
10. Go to Settings>Data Usage>Mobile/Cellular Networks>Preferred Network Type>LTE and also enable "Enhanced 4G LTE mode"
11. Go to Access point names create new APN.
i) . Name : JIO
ii). APN :jionet/jiodata
iii)APN Type :default (if it doesn't work change to ims)
iv)APN protocol : IPv4/IPv6
v) APN roaming protocol : IPv4/IPv6
vi) Port - 80
vii) Server - www.google.com
12.Click Save and select JIO as APN.
13*. Now go to Phone Dialer, dial *#*#4636#*#*>Phone Information>Turn on Volte provisioned flag and turn off IMS registration..
For increasing the Jio 4G speed, Use DNS manager + DNScrypt app on Google store and also change your band to 40. If you have a Qualcomm device then you need to do it by using QXDM and QPST software. For mediatek devices use Engineering mode. Jio is supported on three bands currently Band 3,5 and 40. Band 3 gives the best coverage while band 40 gives the maximum bandwidth and speed. The choice is yours. Also, for users under the welcome offer RJio has limited your maximum transfer rate and is still in beta testing mode. After complete launch Jio will completely be integrated into band 40 and cap on welcome offer users would be removed, until then this is the most what you can do.
*Only if Volte doesn't work.
#For Zephyr OS users : You can see "HD" written on your status bar, or you can see "Your phone is HD capable" as notification.
** The thread is not based on my research, but other XDA members, but since I can't find those members. Please feel free to add yourself.
How is battery backup?
Sent from my 2014811 using Tapatalk
Both have Immortal Kernel so you have to flash your own custom kernel like Jerrica or Berserk or Octopus. My battery backup is just fine. Not good not bad
This is for the 1GB version right? Not the Prime model?
@nrdnandan,Please update post with latest status of VoLTE on N ROMs.
GeorZ said:
@nrdnandan,Please update post with latest status of VoLTE on N ROMs.
Click to expand...
Click to collapse
The list has been updated. Thank you.
@nrdnandan
Here's the package for Lollipop Firmware. Now users don't have to go thru a full MiUi LP flash to get VoLTE support! Please add link to OP
http://forum.xda-developers.com/redmi-2/development/modem-lollipop-firmware-t3517763
List Updated with Dirty Unicorn (Android 7.1.1)
Does the official cm13 builds support voLTE
AbhiFlame said:
Does the official cm13 builds support voLTE
Click to expand...
Click to collapse
I haven't tested it yet. You can try and report back.
rohitaar said:
This is for the 1GB version right? Not the Prime model?
Click to expand...
Click to collapse
This is for all Redmi 2 variants. In fact it is for all Qualcomm Xiaomi devices but of course you have to search for your latest firmware supporting voLTE for your model.
In RR 5.7.4 volte calling not working
Sent from my 2014818 using Tapatalk

Is there any way to port the volte custom patch for E6553 to lineage os?

I'm using Sony's stock rom rooted with magisk. After rooting I have flashed the custom volte patch.zip developed by kiruba developer and I'm using volte with reliance Jio. Can anybody please port that zip file to work with lineage os?

Low mobile data rate

Hi,
currently I'm using the latest dev Firmeware fw_gemini_miui_MI5Global_8.11.22_c5d7ee6745_8.0 with Havoc-OS 2.3[9.0] and have a mobile internet data rate by around 0,03 MB/s - Independent from any locations.
My local carrier is "Klarmobil" as a sub-brand of Telekom (Germany) with H+ (no LTE). I tried a lot with APN settings. I was a bit confused as normally after installing a new ROM a APN setting SMS is received to apply profile - Not with Android 9. So I called the support and did the APN settings by hand - Nothing changed.
Same issue with Resurrection Remix 7.0.0 based on Android 9 with same Firmware. You have any idea?
Regards,
Georg
respeckt said:
Hi,
currently I'm using the latest dev Firmeware fw_gemini_miui_MI5Global_8.11.22_c5d7ee6745_8.0 with Havoc-OS 2.3[9.0] and have a mobile internet data rate by around 0,03 MB/s - Independent from any locations.
My local carrier is "Klarmobil" as a sub-brand of Telekom (Germany) with H+ (no LTE). I tried a lot with APN settings. I was a bit confused as normally after installing a new ROM a APN setting SMS is received to apply profile - Not with Android 9. So I called the support and did the APN settings by hand - Nothing changed.
Same issue with Resurrection Remix 7.0.0 based on Android 9 with same Firmware. You have any idea?
Regards,
Georg
Click to expand...
Click to collapse
Make use of the latest global stable firmware
Here's the link
https://osdn.net/frs/redir.php?m=xt...I5Global_V10.2.2.0.OAAMIXM_d16c808eba_8.0.zip
Enjoy
j4472 said:
Make use of the latest global stable firmware
Here's the link
https://osdn.net/frs/redir.php?m=xt...I5Global_V10.2.2.0.OAAMIXM_d16c808eba_8.0.zip
Enjoy
Click to expand...
Click to collapse
Hi,
thanks for you reply. 3 more (maybe stupid) questions:
1. I was thinking that a non dev version lock the Bootloader again?
2. I always read something about the latest dev Version in the Rom section - Is this compatible with any Android 9 ROM?
3. Can I dirty flash the Firmware or need to do a clean wipe?
Regards
respeckt said:
Hi,
thanks for you reply. 3 more (maybe stupid) questions:
1. I was thinking that a non dev version lock the Bootloader again?
2. I always read something about the latest dev Version in the Rom section - Is this compatible with any Android 9 ROM?
3. Can I dirty flash the Firmware or need to do a clean wipe?
Regards
Click to expand...
Click to collapse
1.The global stable firmware for gemini won't lock your bootloader , I have used it in the following Costom Roms citrus CAF, pixel experience,aosp extended ,havoc os ,jdc nougat , resurrection remix pie, linage os pie and several Manny
2.yes it's compatible with Android 9 the LATEST ONE
3.I recommend doing a clean flash because I never did a dirty one
Enjoy

[ROM][9.0.0_r46][A2017X][OFFICIAL] Resurrection Remix 7.0.2

https://postimages.org/
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
​
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team, SlimRoms and of course to all the supporters.​
​
see below​
​
see below​
​
see below​
https://postimages.org/
@DahakePL XDA Developers LineageOs Team Omni Team And Of Course To All The Supporters, Donators And Users​
Installation:
0. unlocked, O bootloader (universal v2 to start with or the one you prefer), suited twrp (I used the twrp3218), correct modem ...you know the drill
1. Copy RR zip, 9.0.0 gapps zip and Magisk 19.3 to your device
2. Boot into twrp recovery
3. Wipe cache, system, vendor & data
4. Flash ROM
5. Flash gapps
5a Reboot and setup phone ( if not booted first time, force reboot...and wait )
6. Flash Magisk 19.3
7. Reboot and enjoy !
Build :
A2017X RR 9.0.0 r46 v7.0.2 2019.08.12
A2017X RR 9.0.0_r46 v7.0.2 2019.08.23
RR-P-v7.0.2-20190920-axon7-Official.zip
RR-P-v7.0.2-20190922-axon7-Official.zip
RR-P-v7.0.2-20191027-axon7-Official.zip
RR-P-v7.0.2-20200112-axon7-Official.zip
Gapps : https://opengapps.org/
Magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Contributors
@raystef66
Source Code: https://github.com/ResurrectionRemix/platform_manifest
KERNEL SOURCE: https://github.com/OrdenKrieger/android_kernel_zte_msm8996 thnx @OrdenKrieger
ROM OS Version: 9.x PIE
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Unlocked Bootloader, Latest TWRP Recovery
Based On: LineageOS device, vendor, kernel
Version Information : 9.0.0 v7.0.2
Status: Pure & Stable...afaik
Sec. Patches : 2020.01.01
Created : 2019.08.03
Last Updated : 2020.01.12
nice
thank you bro
Gonna try this one as well. Devs have flooded some great roms recently. thanks to all.
Thank you for this rom, I think is the best rom posted recently.
Just one thing, and sorry for the noob question and my english, I feel that GSI roms are more faster than this device specific roms, I have the vendor partition, so, should I flash treble zip in vendor first?
Sent from my Phh-Treble vanilla using Tapatalk
Any trip reports on battery standby drain and screen on time?
Phone Call Audio
I installed this ROM and loved it (I've used RR in the past).
Everything worked fine but for one major thing: while I can place and receive calls I cannot hear or be heard on said calls.
From what I've read this is likely because I have the wrong modem installed, but I cannot for the life of me determine which I should be using, so:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!
BarbbasKid said:
I installed this ROM and loved it (I've used RR in the past).
Everything worked fine but for one major thing: while I can place and receive calls I cannot hear or be heard on said calls.
From what I've read this is likely because I have the wrong modem installed, but I cannot for the life of me determine which I should be using, so:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!
Click to expand...
Click to collapse
If you have the U model, you need the universal bootstack and the U modem
Sent from my ZTE A2017X using Tapatalk
BarbbasKid said:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!
Click to expand...
Click to collapse
I have a U variant and I used
A2017U_OreoModem.zip
and
A2017x_LineageOS15.1_UniversalBootstack_v2_by_DrakenFX.zip
from https://androidfilehost.com/?w=files&flid=270519
I am able to hear and be heard on calls with those and this rom.
Thanks for your work, raystef66!
eeyan said:
I have a U variant and I used
A2017U_OreoModem.zip
and
A2017x_LineageOS15.1_UniversalBootstack_v2_by_DrakenFX.zip
from https://androidfilehost.com/?w=files&flid=270519
I am able to hear and be heard on calls with those and this rom.
Thanks for your work, raystef66!
Click to expand...
Click to collapse
I appreciate you help identifying those files.
Now, however, I am getting an error when flashing RR everything flashes like normal, but at the end I get a red error:
"e2001: failed to update vendor image"
and then (obviously) a #7 error as result.
The only thing I can see that may be the cause is my device does not have a "Vendor" partition (though it didn't the first time I installed RR, either).
I'm in 3.2.1-8 by NFound then:
Flash A2017x_LineageOS15.1_UniversalBootstack_v2
Flash Modem
Flash RR
Then the error.
Any idea on how to fix this issue? I appreciate your help.
BarbbasKid said:
I appreciate you help identifying those files.
Now, however, I am getting an error when flashing RR everything flashes like normal, but at the end I get a red error:
"e2001: failed to update vendor image"
and then (obviously) a #7 error as result.
The only thing I can see that may be the cause is my device does not have a "Vendor" partition (though it didn't the first time I installed RR, either).
I'm in 3.2.1-8 by NFound then:
Flash A2017x_LineageOS15.1_UniversalBootstack_v2
Flash Modem
Flash RR
Then the error.
Any idea on how to fix this issue? I appreciate your help.
Click to expand...
Click to collapse
Use the PARTY vendor creation tool and take 500Mb from your System
Sent from my ZTE A2017X using Tapatalk
@raystef66 what's your preference between this boy and sl!m 8? I just saw this now so I'm a bit late to the party
Mazupicua said:
@raystef66 what's your preference between this boy and sl!m 8? I just saw this now so I'm a bit late to the party
Click to expand...
Click to collapse
:cyclops: you're not late to the party at all. The rom development has got a huge boast now since we can rely on Orden's sources.
I'm on Pie ofc and not on Oreo anymore since this all is happening. Slim would be ok but get a taste of this all going from PE over RR, VIPER, Havoc, LOS16....and more in the pipeline
Choices enough. My preference till now is ViperOS PIE
So enjoy the ride
raystef66 said:
:cyclops: you're not late to the party at all. The rom development has got a huge boast now since we can rely on Orden's sources.
I'm on Pie ofc and not on Oreo anymore since this all is happening. Slim would be ok but get a taste of this all going from PE over RR, VIPER, Havoc, LOS16....and more in the pipeline
Choices enough. My preference till now is ViperOS PIE
So enjoy the ride
Click to expand...
Click to collapse
ViperOS is really great,hope for Long-term support
​
NEW BUILD 2019.08.12
RR-P-v7.0.2-20190812-axon7-Unofficial
changelog :
*android-9.0.0_r46
*latest sec. patches 2019.08.01
*fixed MAC
*key reverse on boot (recent/home/back)
*SELinux enforcing
* ...
E N J O Y
raystef66 said:
​
NEW BUILD 2019.08.12
RR-P-v7.0.2-20190812-axon7-Unofficial
changelog :
*android-9.0.0_r46
*latest sec. patches 2019.08.01
*fixed MAC
*key reverse on boot (recent/home/back)
*SELinux enforcing
* ...
E N J O Y
Click to expand...
Click to collapse
Great work. Please do not be deterred by the low interest in your pie roms thus far. I believe in time the interest will pick up. Please keep at it.
@raystef66
Thx for the ROM it's really nice. Booted on the first try. For now I have one issue though. Can't get VoLTE to work. On the lastest Liquid Remix with VoLTE MOD and Speedy vendor I have working VoLTE. I can call and receive calls. On latest Resurrection Remix, ViperOS, DotOS when I select LTE only I can't get any signal. I've tried flashing Oreo modem but that didn't help either. Without selecting this opition I can't get working VoLTE. What could be the problem here?
squicky said:
@raystef66
Thx for the ROM it's really nice. Booted on the first try. For now I have one issue though. Can't get VoLTE to work. On the lastest Liquid Remix with VoLTE MOD and Speedy vendor I have working VoLTE. I can call and receive calls. On latest Resurrection Remix, ViperOS, DotOS when I select LTE only I can't get any signal. I've tried flashing Oreo modem but that didn't help either. Without selecting this opition I can't get working VoLTE. What could be the problem here?
Click to expand...
Click to collapse
Thnx ! Afaik VoLTE works out-of-the-box on ViperOS. @Masterjuggler confirmed that to me.
On RR, DotOS I cannot confirm this. I cannot check this myself since my carrier doesn't provide this.
Also, the Volte Mod isn't suited for device specific roms like the ones mentioned above.
So try ViperOS first and see if you can get VoLTE working
EDIT : updating Viper to latest august sec patches now. So perhaps wait a little bit to flash again
raystef66 said:
Thnx ! Afaik VoLTE works out-of-the-box on ViperOS. @Masterjuggler confirmed that to me.
On RR, DotOS I cannot confirm this. I cannot check this myself since my carrier doesn't provide this.
Also, the Volte Mod isn't suited for device specific roms like the ones mentioned above.
So try ViperOS first and see if you can get VoLTE working
EDIT : updating Viper to latest august sec patches now. So perhaps wait a little bit to flash again
Click to expand...
Click to collapse
First I tried all these ROMs without VoLTE Mod and then I tried with the Mod. When I choose LTE in IMS app I simply lose signal (No Service). It doesn't matter if it's RR, ViperOS or DotOS. Apart from this on ViperOS somehow Pixel Launcher was force closing.
squicky said:
@raystef66Can't get VoLTE to work.
Click to expand...
Click to collapse
Like ray said, I had it working fine for me. I even confirmed I had the ims LTE service registration in the phone hidden settings. Didn't have to change anything in the settings, worked on the first boot out of the box. I'm on a t-mobile based carrier for what it's worth.

Categories

Resources