1.. Orion OS
2. Zephyr OS
3. HTC Remix ver 3(however it doesn't)
4. Resurrection Remix 5.7.4 (Latest Build works)
5. Tesla ROM (Android N)
6. AICP (Android N)
7. Cardinal AOSP ( Android N)
8. Dirty Unicorn v11.0 (Android N)
Steps to make Volte work
1. Download http://bigota.d.miui.com/V8.0.7.0.LHJMIDG/wt88047_pro_global_images_V8.0.7.0.LHJMIDG_20160805.0000.29_5.1_global_3f4aae40dd.tgz.
2. Extract the .tgz file.
3. Reboot your phone to bootloader/fastboot by clicking the power button and Vol down button simultaneously.
4. Open the extracted folder and click on "flash_all_except_data_storage.bat"(Run As Administrator).
5. Let the phone boot up (it can take upto 10 minutes)
6. Reboot to Custom Recovery like TWRP 3.0.2-0 for Redmi 2.
7. Now clear /system /data/ cache /Dalvik/ART Cache.
8. Now flash the custom ROM
9. Boot the custom ROM and skip the setup wizard (if you like) and go to Settings>SIM cards>Mobile Data. Select Jio 4G.
10. Go to Settings>Data Usage>Mobile/Cellular Networks>Preferred Network Type>LTE and also enable "Enhanced 4G LTE mode"
11. Go to Access point names create new APN.
i) . Name : JIO
ii). APN :jionet/jiodata
iii)APN Type :default (if it doesn't work change to ims)
iv)APN protocol : IPv4/IPv6
v) APN roaming protocol : IPv4/IPv6
vi) Port - 80
vii) Server - www.google.com
12.Click Save and select JIO as APN.
13*. Now go to Phone Dialer, dial *#*#4636#*#*>Phone Information>Turn on Volte provisioned flag and turn off IMS registration..
For increasing the Jio 4G speed, Use DNS manager + DNScrypt app on Google store and also change your band to 40. If you have a Qualcomm device then you need to do it by using QXDM and QPST software. For mediatek devices use Engineering mode. Jio is supported on three bands currently Band 3,5 and 40. Band 3 gives the best coverage while band 40 gives the maximum bandwidth and speed. The choice is yours. Also, for users under the welcome offer RJio has limited your maximum transfer rate and is still in beta testing mode. After complete launch Jio will completely be integrated into band 40 and cap on welcome offer users would be removed, until then this is the most what you can do.
*Only if Volte doesn't work.
#For Zephyr OS users : You can see "HD" written on your status bar, or you can see "Your phone is HD capable" as notification.
** The thread is not based on my research, but other XDA members, but since I can't find those members. Please feel free to add yourself.
How is battery backup?
Sent from my 2014811 using Tapatalk
Both have Immortal Kernel so you have to flash your own custom kernel like Jerrica or Berserk or Octopus. My battery backup is just fine. Not good not bad
This is for the 1GB version right? Not the Prime model?
@nrdnandan,Please update post with latest status of VoLTE on N ROMs.
GeorZ said:
@nrdnandan,Please update post with latest status of VoLTE on N ROMs.
Click to expand...
Click to collapse
The list has been updated. Thank you.
@nrdnandan
Here's the package for Lollipop Firmware. Now users don't have to go thru a full MiUi LP flash to get VoLTE support! Please add link to OP
http://forum.xda-developers.com/redmi-2/development/modem-lollipop-firmware-t3517763
List Updated with Dirty Unicorn (Android 7.1.1)
Does the official cm13 builds support voLTE
AbhiFlame said:
Does the official cm13 builds support voLTE
Click to expand...
Click to collapse
I haven't tested it yet. You can try and report back.
rohitaar said:
This is for the 1GB version right? Not the Prime model?
Click to expand...
Click to collapse
This is for all Redmi 2 variants. In fact it is for all Qualcomm Xiaomi devices but of course you have to search for your latest firmware supporting voLTE for your model.
In RR 5.7.4 volte calling not working
Sent from my 2014818 using Tapatalk
Related
CyanogenMod 13.0 Android 6.0 Marshmallow for the Redmi Note 4G (QCOM)
NOTE: This is for the QCOM variant of the Redmi Note, otherwise known as Redmi Note 4G, and NOT the MTK variant of the Redmi Note. In short, this ROM will NOT work on the MTK variant of Redmi Note 4G
NOTE: GApps is NOT provided; use any GApps package you can find. I would recommend Open GApps for Marshmallow.
NOTEouble tap to wake disabled for now
NOTE: To turn on double tap to wake, root the device and turn double tap to wake with the app provided in the download section.
NOTE: We are looking for active developers and testers to help our team(Team Revior) who are already working on the CyanogenMod 12. If you want to help, please knock us.
You can follow our Google+ Community for new updates on our latest developments of Cyanogenmod 12, 13 and other ROMS:
https://plus.google.com/communities/109685043900289167281
Sources
https://github.com/faheemkamal/
Special Credits
fefifofum
@haoyangw
(I had no idea about making ROMs and Wang constantly helped me with fixing the errors I faced. Without his trees and help, this wouldn’t be possible. )
@audahadi
for fixing the back camera
@stane1983
Credits
Team Revior
@suhasgta
Shubham
@Silesh.Nair
@sm_94
CyanogenMod
XDA
Downloads
https://drive.google.com/folderview?id=0B3ezpQ7wyZXlcU9fRFZ0R3g4ems&usp=sharing
http://opengapps.org/ (select Platform ARM and android 6.0)
http://download.chainfire.eu/supersu
https://drive.google.com/folderview?id=0B3ezpQ7wyZXlN0pDcTR3LUo2a2M&usp=sharing
http://forum.xda-developers.com/apps/spirit-fm/app-spirit2-free-source-real-fm-radio-t2951455 (Spirit FM)
Not working:
this is a stable build so please report what issues you got
Installation
Download the ROM from the link
Download OpenGApps package for Lollipop
Put the zip files on your SDCard
Reboot in Recovery (choose one of the 3 above if you wish )
Wipe Data / Factory Reset (ONLY IF you are coming from another ROM/upgrading)
Recommended: Wipe dalvik-cache
Select "Install zip from SDCard"
Choose CM13.0 zip file
Select "Install zip from SDCard"
Choose OpenGApps zip file
Optional: Select "Install zip from SDCard"
Reboot system
Version Information
Status: Stable
The link to my latest CM-12.1 for DIOR can be found here in this link : http://en.miui.com/forum.php?mod=viewthread&tid=158001
gonna download
wow great man..you very hard working..
Its work ?
Odesláno z mého HM Note 4G pomocí Tapatalk
Tried, stuck in mi logo when boot, using 12.1 v2.62 before
Great work. Looking forward to help in any possible way
I use the same method to install 13 like 12.1, but cannot boot in. Did I miss something? Please help.
kalvinlou said:
I use the same method to install 13 like 12.1, but cannot boot in. Did I miss something? Please help.
Click to expand...
Click to collapse
Since it's still in the Alpha stage, it may not even boot that's why
I Will Help You For Testing ETC.
COUNT ME IN...
Yes, I have 3 Dior phones in hand(friends bought new phones and I collect the old phones from them). I'd like to have great rom here work on them. So count me in to test it please.
I am also compiling cm13 for dior,hope we can fix bugs together
Unfortunately, even after a factory reset and clean installation system was not running.
There were only MI logo and that's it.
I'll wait for the next (hopefully working) version.
V 1.1 (beta) is out
Sent from my HM NOTE 1LTE using Tapatalk
Does cm13 beta v1.1 work well??
What is working and not working..
Please do tell..
And set title to beta..
And what all are new in cm13, and is root stable enough??
TheAqib
Send from my RedMi Note4G
CM13 beta v1.1 works. Thx ☺
Odesláno z mého HM NOTE 1LTE pomocí Tapatalk
Dior Bugs are as per CM13 known bugs.
Alpha means it might be a recommended for daily driver
If you have too much doubts about a ROM, don't flash it or at least do some homework
Sent from my HM NOTE 1LTE using Tapatalk
i get error 12 if i try to install gapps. what recovery should i use?
got it. now i use TWRP, i can install gapps, but as soon as i get into system, setup wizard crashes (micro gapps), so i can`t continue...
EDIT:
i managed. just got back to recovery, factory reset and then i booted into system successfully
BUG: when i'm in call and trying to turn speaker on, it won't work, nothing happens... My fb apk and messenger apk don't work also, always crashes, but fb lite is working great, except when i try to share something from any news apk...
I know that cm12 & cm13 are beta but i'd like to report some bugs. On 2.7.1 cm12 there is wizard error, can't press skip on cm account login page, it crashes wizard. On cm13 1.5 you still can't use fb apk or messenger, else is fine... Great work devs btw, nice to see some1 is really taking effort to make it work
Doesd root apps work fine??
TheAqib
Send from my RedMi Note4G
this is gonna my first thread on xda so please ignore my mistakes
how to get voLTE on any LP and MM based custom rom
so here it goes
1.first flash lollipop miui based rom by fastboot or by recovery. By this you will get lollipop bootloader
i used fastboot rom whose link is given below
http://bigota.d.miui.com/V8.0.7.0.L...DG_20160805.0000.29_5.1_global_3f4aae40dd.tgz
2.now flash any custom rom on which you want voLTE.(self tested on cm13 offical and mokee 6.0)
after flashing rom (jio must be in sim1)
preferred recovery-
http://forum.xda-developers.com/red...ery-built-source-inside-t3277621/post64463515
3.create a access point of details shown in pic
name- ims
apn- ims
apn type- ims
and assure that enhance 4G connectivity option is ON in your sim setting
credits -shubh chaan
still don't understood...???
Sent from my 2014811 using Tapatalk
It is working! Thanks
thanks bro... it's working on nexus rom and also on mokee
What is this?
This is a patch for Kenzo by which you will get volte on any nougat rom (non volte) out there.
Disclaimer:
If you want to add this patch to your rom, please give proper credits and link this thread too.
If you like this, press that thanx button. If you use this, consider donation. :victory:
Requirement:
Redmi note 3 on any rom
Unlocked and with TWRP recovery
VoLTE v3 patch 25-01-17
Instructions:
Clean flash
1. Download any non volte rom
2. Download v3 patch
3. Flash the rom according to instructions provided on rom thread
4. Flash firmware 15-11-16 Credits Newer firmware? Try and report. :good:
5. In the end flash v3 patch
6. Reboot.
Dirty Flash OTA
Flash your rom's ota as you do(without wiping system), no need to flash patch again. It will be auto applied after every dirty flash.
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- It may.
2. Does volte works on second sim?
A- Not tested but should work.
3. Is there or going to be any patch for Marshmallow based roms?
A- Yes. Go here
4. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
5. Everything above said is checked, still no VoLTE?
A- Check v2 guide and also post #3.
Donations:
Thanx for your kind donations, it helps.
Send me a pm if you have donated, if you want to join telegram group for close testing and support. :highfive:
NVDX11, 99xxxx3869, 97xxxx1652, 94xxxx8709 (AmolAmrit), 89xxxx6581 (hemant_jeengar), 77xxxx8388, 88xxxx9810, 90xxxx4024, 86xxxx0406, 89xxxx8858, 88xxxx9810, asrupesh, 73xxxx6596, MakDroid, BabyTedhu, 95xxxx7623 (vk82119), 81xxxx4723, 73xxxx3906, 88xxxx0101, Pancha5
Credits:
TheStrix
abhishek987
Santhosh M
Telegram Channel for faster ETA's, Changlog: Channel
XDA:DevDB Information
VoLTE Patch Nougat, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Sudeep Duhoon
Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2016-12-31
Created 2016-11-29
Last Updated 2017-01-25
Changelog and v1 beta patch (old)
Change-log:
25-01-17 v3 released Might be last
Based on TheStrix Commits
13-01-17
Updated with newer files
31-12-16 v2 released
Only 1 zip needed now instead of 2
Universal for nougat
OTA support
64k sim support, no force close
Auto patch, no manual build.prop editing
Reduced size a lot
Don't touce framework-res.apk
Old v2 guide
What is this?
This is a patch for Kenzo by which you will get volte on any nougat rom (non volte) out there.
Disclaimer:
If you want to add this patch to your rom, please give proper credits and link this thread too.
If you like this, press that thanx button. If you use this, consider donation. :victory:
Requirement:
Redmi note 3 on any nougat volte enabled rom (read FAQ #5 too)
Unlocked and with TWRP recovery
VoLTE v2 patch 31-12-16
VoLTE v2 patch 13-01-17
Instructions:
Clean flash
1. Download any non volte rom
2. Download v2 patch
3. Flash the rom according to instructions provided on rom thread
4. In the end flash v2 patch
5. Reboot.
Dirty Flash OTA
Flash your rom's ota as you do(without wiping system), no need to flash patch again. It will be auto applied after every dirty flash.
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- No!
2. Does volte works on second sim?
A- Not tested but should work.
3. Is there or going to be any patch for Marshmallow based roms?
A- Yes. Go here
4. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
5. Everything above said is checked, still no VoLTE?
A- Check post #3.
Donations:
Thanx for your kind donations, it helps.
Send me a pm if you have donated, if you want to join telegram group for close testing and support. :highfive:
NVDX11, 99xxxx3869, 97xxxx1652, 94xxxx8709 (AmolAmrit), 89xxxx6581 (hemant_jeengar), 77xxxx8388, 88xxxx9810, 90xxxx4024, 86xxxx0406, 89xxxx8858, 88xxxx9810, asrupesh, 73xxxx6596, MakDroid, BabyTedhu, 95xxxx7623 (vk82119), 81xxxx4723, 73xxxx3906, 88xxxx0101, Pancha5
Credits:
abhishek987
TheStrix
Santhosh M
Telegram Channel for faster ETA's, Changlog: Channel
Old v1 guide
What is VoLTE
Requirement:
Redmi note 3 on Working VoLTE Nougat rom
Unlocked and with TWRP recovery
Instructions:
Auto (Limited):
1. Download Rom from respective thread and follow the instructions given there to flash it.
2. Download the "volte.zip" and "volte_ROMNAME_BUILDDATE.zip" from here. (check the rom name and build date correctly before flashing)
3. Flash "volte_ROMNAME_BUILDDATE.zip"
4. Flash "volte.zip"
5. Wipe cache and dalvik.
6. Reboot. Done!
Notes:
(i) Volte.zip is common for all roms, other rom specific zips will be based on rom name and their build date. This is done to reduce the bandwidth required to download patches.
(ii) If volte not working then download abhishek's firmware from here and flash it. Thanx to xenolith190 for pointing this out.
Manually (No limits):
Additional requirement: A PC with windows (can be done on android too but not included in this tutorial)
1. Download and flash the rom according to the instruction provided on rom's thread.
2. Download apktool and extract/setup in your pc.
3. Use File explorer inTWRP and copy /system/framework/framework-res.apk to /sdcard
4. Connect phone to pc and copy/move framework-res.apk to apktool directory.
5. Open cmd and cd to your apktool dir. And type following commands:
Code:
apktool if framework-res.apk
apktool d framework-res.apk
6. Open to /res/values/bool.xml in text editor (i use notepad++) and change these values to true
Code:
<bool name="config_device_volte_available">true</bool>
<bool name="config_carrier_volte_available">true</bool>
7. Type
Code:
apktool b framework-res
to build apk back.
8. Open new framework-res.apk from apktool/framework-res/dist folder and old framework-res.apk from apktool folder using a zip software like winrar.
9. Drag and copy AndroidManifest.xml and META-INF from old to new apk.
10. Same way drag this new apk to any of the rom specific zip available on this thread and flash as instructed.
NOTES: You need to edit bool.xml in framework-res.apk to enable volte option in rom. Rest of the required libs and files are present in volte.zip and is common for all roms. This tutorial may become more detailed, it completely depends on free time i get. I will not answer any question regarding this in personal messages. If you edit any rom's framework-res.apk please mention me and add that in this thread and i will add you to the op as contributor so you can maintain that rom's future builds too.
Thank you for understanding.
Downloads: HERE
From now on patches will be added here (XDA ERROR:Missing or incorrect project information.)
1. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 20-12-2016
2. [UNOFFICIAL] ResurrectionRemix CK FPC 5.8.0 [OTA/OMS] - 23-12-2016 NOT WORKING (send me framework-res.apk)
3. Mokee 201612230813-NIGHTLY
4. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 23-12-2016
5. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 26-12-2016
Community built patches:
Patch for cosmic os 1st december 2016 build by xenolith190
Patch for BeanStalk 7.1.1 by contactwajeeh
Patch for 08th December Nightly AICP by gulshanstrider
Patch for 08th December nightly AICP by contactwajeeh
Patch for CM Official Nightly's by contactwajeeh
Patch for AOKP 9/12 Build by NVDX11
Patch for CleanRom 9th december 2016 build by xenolith190
Patch for official cm 14.1 nightly 10.12.16 by sarveshrulz
Patch for Cr droid 1.5 by vk82119
Patch for aicp 11th dec build by Sumit Samanta
Patch for aicp 12th dec build by Sumit Samanta
Patch for official cm 14.1 13-12-16 build by ashokumar257
Patch for official cm 14.1 15-12-16 build by ashokumar257
Patch for AICP 19th December build by gulshanstrider
Patch for NucleaRom build by sohail0098
Done:
CM
crDroid 7.1
XenonHD
CM14.1 (TheStrix)
Lineage os by @Infinity
AOSP/CAF
CleanRom
AOSPExtended
halogenOS 7.0
Aoscp 3.1.2
CitrusCAF-kenzo-2.2-LemonDrop-OFFICIAL-20161129 Supports Volte now
AICP Build date 29th October Thanx to skandhan for sending the file
AICP Build date 11th November Thanx to fosterqaz11 for sending the file
Cosmic-OS v1.1
ZephyrOS-7.0-20161130-Viersion-V6.1
Slim7
Mokee 201612110653-NIGHTLY
Mokee 201612230813-NIGHTLY
All requested roms done, for more, please request. If you can link of the thread of requested rom, it will be great.
To Do:
Send rom's framework-res.apk in PM, google drive preferred.
Testing:
NOTE:These are test patches and unlikely to work. You might get a bootloop.
Official CM13 Patch Download Working chances 60%
Resurrection Remix 5.7.4 Patch Download Working chances 5%
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- No!
2. Does volte works on second sim?
A- Not tested, tested with jio sim in first slot, works fine.
3. Is there or going to be any patch for Marshmallow based roms?
A- Test Patches are added, if anyone wants to try.
4. Marshmallow patches are not working?
A- Send me logcat.
5. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
6. I got com.android.phone force close what should i do?
A- Clean flash the Rom or wait for the fix.
7. Everything above said is checked, still no VoLTE?
A- Check if you have set correct APN for particular sim card and if still VoLTE is not working send me logs.
8. No Audio in calls.
A- Use any root explorer and edit build.prop to change ro.qc.sdk.audio.fluencetype=fluence to ro.qc.sdk.audio.fluencetype=none. Save, set correct permissions and reboot.
9. Got Bootloop on CM Nightly or any other newer rom
A- Decompiling and recompiling alone, without making any changes to framework-res.apk in these roms are causing bootloops, must be issue with apktool/rom. Can't do anything.
XDA:DevDB Information
N Roms VoLTE Patches, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Sudeep Duhoon
Santhosh M
TheStrix
Akhil Narang
gulshanstrider
contactwajeeh
xenolith190
NVDX11
sarveshrulz
vk82119
Sumit Samanta
Version Information
Status: Beta
Created 2016-11-29
Last Updated 2016-12-30
How to get VoLTE for the first time
Things needed: (things with * is needed for unofficially unlocked device)
1. Redmi note 3 on any rom
2. TWRP recovery
3. A PC with working internet connection
4. USB Cable
5. Mi Unlocker tool (google)
6. Mi Flash tools (google)
7. Any miui fastboot rom, build previous to 6.11.15 build (i use 6.11.3)
8. CM VoLTE by abhishek987
*emmc_aboot (which you used to unlock officially)
*boot.img_patcher.zip
*lazyflasher.zip
Instruction: (steps with * is needed for unofficially unlocked device)
1. Extract miui rom and replace TWRP with recovery.img. *replace emmc_aboot too if unofficially unlocked
2. Reboot device to fastboot and connect it to pc
3. Install/open Mi flash tools and browse to extracted rom's dir
4. Click Flash (your internal storage my get wipes)
5. Monitor the process and when it is near to end keep volume down button pressed
6. Phone will restart to fastboot and use Mi unlocker tool to unlock your bootloader as it may have been relocked *use fastboot command fastboot oem device-info to check status and if locked then use fastboot oem unlock-go to unlock bootloader.
7. Press and hold volume up+power to reboot to twrp
8. Use file manager to check if data is wiped or not, if not the wipe data (not internal sd), wipe cache too *flash lazyflashed and bootimg patcher
9. Reboot and complete initial setup
10. Once you get VoLTE symbol on status bar try to call someone and then reboot to recovery
11. Backup EFS and adspso
12. Flash CM VoLTE according to details provided on thread (skip any custom kernel, gapps, etc)
13. Reboot to check VoLTE working, if not reboot to recovery and restore EFS
14. Once volte gets working, follow post #1 to flash any non volte rom.
is there a link?
42o247 said:
is there a link?
Click to expand...
Click to collapse
seems NO :silly:
Reallyyyy
We can make volte work on non volte roms...!!!!....thats cooolllll
wow you both were fast. still editing. lol
ps. adding link first, will edit later
great...volte for every rom...
Haha... Bro i am waiting add link fast
Link link link.....i cant waitttt
Link plz....
kiran G. said:
Reallyyyy
We can make volte work on non volte roms...!!!!....thats cooolllll
Click to expand...
Click to collapse
BRoy_98 said:
seems NO :silly:
Click to expand...
Click to collapse
42o247 said:
is there a link?
Click to expand...
Click to collapse
silentkiller88 said:
Haha... Bro i am waiting add link fast
Click to expand...
Click to collapse
kiran G. said:
Link link link.....i cant waitttt
Click to expand...
Click to collapse
megatron0110 said:
Link plz....
Click to expand...
Click to collapse
link up for crDroid.
Sudeep Duhoon said:
is there a link?
Haha... Bro i am waiting add link fast
link up for crDroid.
Click to expand...
Click to collapse
For resurrectionRemix?
megatron0110 said:
For resurrectionRemix?
Click to expand...
Click to collapse
it already has volte
Y is it named as crdroid...???....does this work only on crdroid...???
kiran G. said:
Y is it named as crdroid...???....does this work only on crdroid...???
Click to expand...
Click to collapse
yes. only for crDroid. I am uploading XenonHD and CM14.1 fix as well. Slow connection, i need some time.
Sudeep Duhoon said:
yes. only for crDroid. I am uploading XenonHD and CM14.1 fix as well. Slow connection, i need some time.
Click to expand...
Click to collapse
Any screenshot of crdroid ROM that volte is working ?
A Request to OP. Please make a patch for any 7.0 based Rom with OMS commits so that we can enjoy substratum also.
There are many cm14.1 Roms out there but none of them has substratum support
Please make a patch for a ROM with OMS commits
only for crdroid rom?
Can I use this in RR 7.4?
Hello, Redmi 2 users
Meizu officially launched its FlymeOs rom for Redmi 2.
I do not develop nor do I support rom, I'm just sharing. All credits belong to Meizu's team of developers.
Android version: 6.0.1 based
Recommended gapps: arm pico 6.0 (you may need to remove some system apps to free up space)
More information here (Chinese only):
http://www.flyme.cn/firmwarelist-29.html#7
Download:
Flyme 6.7.5.8R beta Redmi 2
Initial release
May contain multiple bugs
We have to flash gapps right
Which version of gapps??? Android version of the ROM?
Android version etc?
And is volte support is there?
preetnoobie said:
We have to flash gapps right
Which version of gapps??? Android version of the ROM?
Click to expand...
Click to collapse
Install gapps arm 6.0, it may be necessary to remove some system apps before installing to free space (I did not install gapps)
gritik95 said:
Android version etc?
And is volte support is there?
Click to expand...
Click to collapse
Android version 6.0.1
I do not know about VoLTE in this rom
gritik95 said:
Android version etc?
And is volte support is there?
Click to expand...
Click to collapse
I saw a review and it had volte
NaassomDourado said:
Android version 6.0.1
I do not know about VoLTE in this rom
Click to expand...
Click to collapse
But i saw somewhere that flyme os 6 is nougat based?
preetnoobie said:
I saw a review and it had volte
Click to expand...
Click to collapse
If you (or anyone) test and confirm that VoLTE works, please advise me to add the information in the thread.
gritik95 said:
But i saw somewhere that flyme os 6 is nougat based?
Click to expand...
Click to collapse
Only for some devices like one plus 3
gritik95 said:
But i saw somewhere that flyme os 6 is nougat based?
Click to expand...
Click to collapse
Then let's flash the ROM first, boot up and then get to know every detail. I am doing just that and will be able to give a feedback soon (hopefully).
gritik95 said:
But i saw somewhere that flyme os 6 is nougat based?
Click to expand...
Click to collapse
Probably can be in other devices, Redmi 2 is based on marshmallow
Can anyone give screen shot of flyme 6 of redmi 2
i installed it with twrp 3.0 no issues while flashing
1. themes doesnt work. force closes
2. couldn,t make data work. couldnt add apn settings for jio. keyboard was acting weird. and connectivity app was force closing.
3. camera works (7mp) max
4. video recording works too.
5. tried calling with jio. didnt work for me.
i guess its still in the early stages. we should wait for a better build in the future.
alok pupun said:
Can anyone give screen shot of flyme 6 of redmi 2
Click to expand...
Click to collapse
added
Maybe VoLTE is not supported
And it's a beta version so bugs are there
gritik95 said:
Maybe VoLTE is not supported
And it's a beta version so bugs are there
Click to expand...
Click to collapse
Bro, Not only volte..
Also, We're not able to run 4G internet.
The preferred network type includes only Auto/3G/2G..
No 4G.. that is the reason, internet and voLTE isn't working.
And we'll not get stable release, as this is ported by third party meizu devs, and they always release beta builds.
Earlier, I flashed Flyme 5.
In that version, I wasn't able to boot.
Whenever, I tried to setup my language/country.. it reboots.
These flyme os builds aren't much usable.
They're just for experiencing FlymeOs
CaptainKnox said:
Then let's flash the ROM first, boot up and then get to know every detail. I am doing just that and will be able to give a feedback soon (hopefully).
Click to expand...
Click to collapse
the rom is goood but volte and data are not working
Data and 4g working for me
I got data working but no VoLTE. Besides, I am unable to flash any GApps. I removed a lot of bloatware from the system partition and tried a GApps package with 38 MB size but that too is not installing. Guess we need a 10 or even maybe 5 MB GApps package for this ROM lol. Apart from that, the Theme app crashes (can't even change wallpaper) and the stock keyboard is not good at all after coming from Gboard.
As for the UX, I must say MIUI is a whole lot better. This ROM is cramped with all sorts of bloatware which even MIUI doesn't have. No wonder the size is 735 MB even without GApps. It is best to avoid this ROM. This ROM is only usable if you don't use a Google account. On the plus side, animations are quite good.
sethidheeraj06 said:
Bro, Not only volte..
Also, We're not able to run 4G internet.
The preferred network type includes only Auto/3G/2G..
No 4G.. that is the reason, internet and voLTE isn't working.
And we'll not get stable release, as this is ported by third party meizu devs, and they always release beta builds.
Earlier, I flashed Flyme 5.
In that version, I wasn't able to boot.
Whenever, I tried to setup my language/country.. it reboots.
These flyme os builds aren't much usable.
They're just for experiencing FlymeOs
Click to expand...
Click to collapse
Use single sim on flyme 5, it won't work with dual sim. It boots fine with single sim.
---------- Post added at 04:02 PM ---------- Previous post was at 04:00 PM ----------
nairitmukherjee0007 said:
i installed it with twrp 3.0 no issues while flashing
1. themes doesnt work. force closes
2. couldn,t make data work. couldnt add apn settings for jio. keyboard was acting weird. and connectivity app was force closing.
3. camera works (7mp) max
4. video recording works too.
5. tried calling with jio. didnt work for me.
i guess its still in the early stages. we should wait for a better build in the future.
Click to expand...
Click to collapse
Better remove imei information from the screen shot.
Hi,
currently I'm using the latest dev Firmeware fw_gemini_miui_MI5Global_8.11.22_c5d7ee6745_8.0 with Havoc-OS 2.3[9.0] and have a mobile internet data rate by around 0,03 MB/s - Independent from any locations.
My local carrier is "Klarmobil" as a sub-brand of Telekom (Germany) with H+ (no LTE). I tried a lot with APN settings. I was a bit confused as normally after installing a new ROM a APN setting SMS is received to apply profile - Not with Android 9. So I called the support and did the APN settings by hand - Nothing changed.
Same issue with Resurrection Remix 7.0.0 based on Android 9 with same Firmware. You have any idea?
Regards,
Georg
respeckt said:
Hi,
currently I'm using the latest dev Firmeware fw_gemini_miui_MI5Global_8.11.22_c5d7ee6745_8.0 with Havoc-OS 2.3[9.0] and have a mobile internet data rate by around 0,03 MB/s - Independent from any locations.
My local carrier is "Klarmobil" as a sub-brand of Telekom (Germany) with H+ (no LTE). I tried a lot with APN settings. I was a bit confused as normally after installing a new ROM a APN setting SMS is received to apply profile - Not with Android 9. So I called the support and did the APN settings by hand - Nothing changed.
Same issue with Resurrection Remix 7.0.0 based on Android 9 with same Firmware. You have any idea?
Regards,
Georg
Click to expand...
Click to collapse
Make use of the latest global stable firmware
Here's the link
https://osdn.net/frs/redir.php?m=xt...I5Global_V10.2.2.0.OAAMIXM_d16c808eba_8.0.zip
Enjoy
j4472 said:
Make use of the latest global stable firmware
Here's the link
https://osdn.net/frs/redir.php?m=xt...I5Global_V10.2.2.0.OAAMIXM_d16c808eba_8.0.zip
Enjoy
Click to expand...
Click to collapse
Hi,
thanks for you reply. 3 more (maybe stupid) questions:
1. I was thinking that a non dev version lock the Bootloader again?
2. I always read something about the latest dev Version in the Rom section - Is this compatible with any Android 9 ROM?
3. Can I dirty flash the Firmware or need to do a clean wipe?
Regards
respeckt said:
Hi,
thanks for you reply. 3 more (maybe stupid) questions:
1. I was thinking that a non dev version lock the Bootloader again?
2. I always read something about the latest dev Version in the Rom section - Is this compatible with any Android 9 ROM?
3. Can I dirty flash the Firmware or need to do a clean wipe?
Regards
Click to expand...
Click to collapse
1.The global stable firmware for gemini won't lock your bootloader , I have used it in the following Costom Roms citrus CAF, pixel experience,aosp extended ,havoc os ,jdc nougat , resurrection remix pie, linage os pie and several Manny
2.yes it's compatible with Android 9 the LATEST ONE
3.I recommend doing a clean flash because I never did a dirty one
Enjoy