Database Develop

Display broken - start Active Sync?

Unfortunately the display of my Diamond broke and now i can't use it anymore (touchscreen didn't work - phone still works (booting, ringing etc)). I want to make a backup with Active Sync and MyMobiler, but everytime I connect the Diamond with my PC it only starts the access to the in-build flash-memory. I cannot change the behavoir for starting in Active Sync-Mode on Diamond.
What can I do?

Screen acting weird.
I have a problem with my screen too. Sometimes I cant use my touchscreen anymore. When I turn off the screen and wait a little bit I can use it again. But lately another problem has occurred, my screen keeps on loosing its alignment.
Its almost like my screen is dying...

i recently had the same problem...my fone was fully functioning all apart from my touch screen itself... i had to painfully keep runing the screen alignment an now it is fine

The only solution I could think of would be to put a registry file containing the ActiveSync setting [instead of 'connect as removable drive'] onto the phone and try to start it using the hardware buttons.
Unfortunately, I couldn't get into the start menu without the stylus. But the hardware buttons allow you to scroll through the TouchFLO tabs so you're able to access the programs tab. Maybe you've assigned explorer or activesync to one of those buttons? If not, you're able to assign one even w/o the stylus. I failed to re-enable the settings tab so I don't know what's on it. Maybe that one helps, too.

When you connect your device to your PC you can change you connection optons with the hardware buttons. This way you can set it to activesync. this has also been my solution to get to the screen alignment settings via mymobiler. But now I need to get a stock dutch SPL so I can return my phone to repair the screen. I dont carry my laptop around at all times...

Extend SCreen

Hey i was wondering if there was a way i could extend the screen to another display BUT ALSO USE IT AS A TOUCH SCREEN?

YES
Provided the destination system has touch screen.
In the market is a app that connects via USB, and presents your SGT screen on the PC, usually controlled on the PC with the mouse, but if you had a touch screen PC, then your golden.

Lcd screen broken

Hello everybody not sure where to post this but. ...
I tried replacing my girlfriends s3 cracked glass and somehow when I put the glass on and turned it on the lcd screen isn't turning on and I'm afraid I messed it up. It powers up but is just black only way I know that the phone is on is the led light and start up sounds.
I priced put lcd + digitizer online. But my question is .. is there a way I can plug the phone into the pc and navigate thru the files on the phone as if it were the phone itself on the pc like some sort of emulator. I know there r emulators put there but mostly advertised to play android games what I want exactly is to operate her phone. . Sim card attached and use the pc monitor as the phone screen basically.
sent from my big @$$ phone

touch screen and micro usb don't work properly

hi ,
i have a htc one m7 that is not recognized by pc when it is in bootloader mode, however the phone doesn't charge properly when i plug it in the current because the cable moves when it is plugged.
if i use a micro usb with not long exit, it charges well, if i use a cable with big exit, it moves easily and it often doesn't charge.
the second problem is:
the highest part of the screen doesn't recognize the touch, to use that part i have to press strongly and using the entire finger or a big part of it (if i use the extremity of the finger, it doesn't work ), AND the highest point of the screen ( status bar) doesn't work NEVER.
How to fix micro usb?
How to fix screen problem (i think that is a software problem)
i have not original charging cable
i have just tried to do make electro-shocks to the screen but it doesn't work

cescof said:
hi ,
i have a htc one m7 that is not recognized by pc when it is in bootloader mode, however the phone doesn't charge properly when i plug it in the current because the cable moves when it is plugged.
if i use a micro usb with not long exit, it charges well, if i use a cable with big exit, it moves easily and it often doesn't charge.
the second problem is:
the highest part of the screen doesn't recognize the touch, to use that part i have to press strongly and using the entire finger or a big part of it (if i use the extremity of the finger, it doesn't work ), AND the highest point of the screen ( status bar) doesn't work NEVER.
How to fix micro usb?
How to fix screen problem (i think that is a software problem)
i have not original charging cable
i have just tried to do make electro-shocks to the screen but it doesn't work
Click to expand...
Click to collapse
If your usb port is damaged you can replaced it. Removing the cover of the phone is a little tricky but once done, the usb board is easily replaced.
You can test your touchscreen by lauching the diagnostic menu by dialing *#*#3424#*#* form there you can access the line drawing test. Test your screen and if some inputs are not registered then your digitizer is probably faulty and will need to be replaced.

Broken screen (bottom half)

My S10 fell out of my hands the other day and the bottom half of the screen is broken. The top half of the screen is somewhat visible. I'd like to get all the data/pictures off of the phone.
What is the best way to do this? I can't get it unlocked because I have no idea if touch is still working on the bottom half, so I can't really get it into USB Transfer mode. I'd like to avoid going to the local phone fixer.
Thanks for your help.

Maybe you can try to connect it to a USB-C Monitor, some have built in hubs to which you can connect a mouse and then control the phone like that. I know that not everyone has a USB-C Monitor but maybe you can find one at work or something. Hope that helps you.
Greetings
Fast_Lessy