i bricked my htc 510 now is dead
not power on
not charge
no fastboot mode
no recovery
when connect with pc is connect as hs usb qdloader 9008
Any help plz ?
What exactly did you do to brick it?
i just try to flash rom and the flash stop at the midle and power off
and still off no thing happend after
Samy6699 said:
i just try to flash rom and the flash stop at the midle and power off
and still off no thing happend after
Click to expand...
Click to collapse
do you have a linux pc ?
or if not we might not be able to help you because we dont have schematic for a test point shortout to get the phone in download mode witch is risky i had to do with my lg l90 but no luck it had a msm8226 chip but with some minor changes and i could not fix it but yeah :crying:
---------- Post added at 12:15 PM ---------- Previous post was at 12:07 PM ----------
Samy6699 said:
i just try to flash rom and the flash stop at the midle and power off
and still off no thing happend after
Click to expand...
Click to collapse
was your device s-off (security off) because its hard to get a wrong image or delete an images of your device partition table only if it was an s-off thats possible but nothing else
so is the phone recoverable? all i have is a black screen my battery has been dead for like 2months should i get a new battery? when i plug into computer hs usb drivers....help please.
/
OroKabuto said:
so is the phone recoverable? all i have is a black screen my battery has been dead for like 2months should i get a new battery? when i plug into computer hs usb drivers....help please.
/
Click to expand...
Click to collapse
I have been following this guide (droidsavvy com/unbrick-qualcomm-mobiles/) but have yet to be successful sadly. My phone is in the Old mode by what the guide says.
Our best chance is if someone with a 510 creates a backup.img for us and we can flash it (hope someone here is nice enough to do it!)
Related
Hey guys, sorry if I write bad.
I tried to flash my x8 for put in the rom GingerDX v31b. Anyways... I think my USB cable was broken or something, when I tried to flash baseband 015, it was flashed but then I power on my phone and... Boom! That image appeared: a triangle with a exclamation sign and a phone .
It reboots again and again, my computer doesn't recognize the phone. I need help guys. Sorry for bad writing.
On the other hand.. I have my phone with unlocked bootloader, and I installed so much roms. Any question? sorry if I forgot something. Thank you guys and sorry again if I put the thread in the wrong place.
Francisco Fávaro.
hmm you are sure that flashtool doesnt recognize it?
if you cant use flashtool then go to recovery
i hope this is going to solve he problem
send from xperia x8
little help
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
noki severgun said:
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
Click to expand...
Click to collapse
Look under your battery inside the phone. There is a number like 10W34 or 11W10
What is your number?
1.turn of the device
2.open pc companion
3.click support zone
4.click update without connected phone
5.It will ask you about repair(something like that..)
6.click yes
7.wait the program to prepare the pc
8.chose the x8 from devices list
9.wait until download the rom
10.plug the device when the program say to..
CtrlAltDelIrl said:
Look under your battery inside the phone. There is a number like 10W34 or 11W10
What is your number?
Click to expand...
Click to collapse
it is 11w16
Wait...why do you think it's something about bootlader???
just connect to flashtool and recover or if can't be recognized then try with PC Companion else reinstall rom or restore backup with recovery
---------- Post added at 03:44 PM ---------- Previous post was at 03:31 PM ----------
noki severgun said:
Hi,
I've tried to flash my xperia x8 with flashtool but after the flashing, my phone turn off and it won't turn on or connect to the pc. Is it broken for good or there is still hope
Click to expand...
Click to collapse
Ok you flash something but WHAT?
All i know that you have 11W16 and you can't hard brick that(unless you are really..... )
Anyway let's help you out
First of all,how many % did your battery have before flashing?
If under 10% then try to connect the charger
if it done't help keep reading
What did you do with flashtool--->FLASHING or UNLOCKING BOOTLOADER?
If FLASHING: What did you flash,please write down name of file
If UNLOCKING BOOTLOADER:
Try to turn on you phone--->If it won't turn on---->try to connect it to PC in flashmode so FLASHTOOL can recognize it
If FLASHTOOL can't recognize it try with PCC.....if that doesn't work either see does your phone have any Signs of life
If you'r phone is completly dead(no sign of life) than it's probably a HARD BRICK
I hope i helped :good:
big THANKS
8cpaiw said:
Wait...why do you think it's something about bootlader???
just connect to flashtool and recover or if can't be recognized then try with PC Companion else reinstall rom or restore backup with recovery
---------- Post added at 03:44 PM ---------- Previous post was at 03:31 PM ----------
Ok you flash something but WHAT?
All i know that you have 11W16 and you can't hard brick that(unless you are really..... )
Anyway let's help you out
First of all,how many % did your battery have before flashing?
If under 10% then try to connect the charger
if it done't help keep reading
What did you do with flashtool--->FLASHING or UNLOCKING BOOTLOADER?
If FLASHING: What did you flash,please write down name of file
If UNLOCKING BOOTLOADER:
Try to turn on you phone--->If it won't turn on---->try to connect it to PC in flashmode so FLASHTOOL can recognize it
If FLASHTOOL can't recognize it try with PCC.....if that doesn't work either see does your phone have any Signs of life
If you'r phone is completly dead(no sign of life) than it's probably a HARD BRICK
I hope i helped :good:
Click to expand...
Click to collapse
First of all THANKS A LOT for your effort, I mean: really THANKS!!!
So let me tell you a story
It was my forth x8 phone that I've tried to install CM9 on and previously it went very well but yesterday I've did it in a hurry and forget to change the flash file on the flash tool and when I click on the magic button with the flash sign I've realized that the x8 was flashed with x10 firmware the default firmware on the flashtool program (really stupid mistake ). After that the phone turn off and went on haven.
After I cold my head and start to search for new x8 (to replace the broken one) I've realized that the phone has 24 month warranty and the first thing that I did this morning was to return the phone to the shop that was bot from.
I hope that some of you out there had 5 min lol session from my experience in the story, and please, If somebody else thinks that he knows how to do it without reading the manual - this are the consequences!!!
The only way to bring this phone alive is with riff jtag box that I didn't have.
P.S. **** happens
Yes a few people from forum flashed wrong firmware and got hard bricked....amm it's hard brick so they will replace your motherboard
I am glad to help
First , Hi to the entire community that help me a lot of time !
I have downloaded a file called " twrp-2.7.0.0_Signed.zip" on my Htc one M7 under my previous version of trwp so 2.6.3 . My phone restart and then doesn't turn on .
Ive tried to use power + vol down trick and some others to enter hboot menu but nothing happen . When i plug it with usb cable or sector one , nothing happen no light nothing .
But when it's plugged on my computer and when i push the power button + vol down , i can hear a windows ring like something is connected by usb port . But nothing appear on the device manager .
It is definitively bricked ?
hcrcorp said:
First , Hi to the entire community that help me a lot of time !
I have downloaded a file called "twrp-2.7.0.0_Signed.zip" on my Htc one M7 under my previous version of trwp so 2.6.3 . My phone restart and then doesn't turn on .
Ive tried to use power + vol down trick and some others to enter hboot menu but nothing happen . When i plug it with usb cable or sector one , nothing happen no light nothing .
But when it's plugged on my computer and when i push the power button + vol down , i can hear a windows ring like something is connected by usb port . But nothing appear on the device manager .
It is definitively bricked ?
Click to expand...
Click to collapse
Have you tried shining a bright light over the light sensors while holding down the PWR button and Vol down? You might also try the RUU for your phone even though the computer doesn't formally recognize it.
Thank you for your quick answer . I've already tried the trick with the light sensor . but i did not try the Ruu solution . i'm gona to do it now :good:
hcrcorp said:
Thank you for your quick answer . I've already tried the trick with the light sensor . but i did not try the Ruu solution . i'm gona to do it now :good:
Click to expand...
Click to collapse
edit : i've just tried The Ruu for my htc one M7 but it returns to an error [170] probably due to this that the phone will not turn on .
i went to my device manager and i can see QUALCOMM HS6USB QDLOADER 9008 on com4 . do i have to rty fix it with le dload reviver.sh ?
hcrcorp said:
edit : i've just tried The Ruu for my htc one M7 but it returns to an error [170] probably due to this that the phone will not turn on .
i went to my device manager and i can see QUALCOMM HS6USB QDLOADER 9008 on com4 . do i have to rty fix it with le dload reviver.sh ?
Click to expand...
Click to collapse
oO, that file you downloaded has the following updater-script:
Code:
package_extract_file("boot.blob", "[B][COLOR="Red"]/dev/block/mmcblk0p4[/COLOR][/B]");
i think you're going to have a really hard time fixing this, if it's even possible, which is probably not the case.
maybe best to send it to repair for a motherboard replacement
nkk71 said:
oO, that file you downloaded has the following updater-script:
Code:
package_extract_file("boot.blob", "[B][COLOR="Red"]/dev/block/mmcblk0p4[/COLOR][/B]");
i think you're going to have a really hard time fixing this, if it's even possible, which is probably not the case.
maybe best to send it to repair for a motherboard replacement
Click to expand...
Click to collapse
Thx for your answering , i have time to fix it but i do not have capacity to do it ( i'm a noob )! i have flashed my phone several times and get it soff and so on without any problem . I don't know why i flashed this Zip file without check up the updater script .
i'll try to find a way by the web to resolve my problem and post it after here . Thanks all of you .
hcrcorp said:
Thx for your answering , i have time to fix it but i do not have capacity to do it ( i'm a noob )! i have flashed my phone several times and get it soff and so on without any problem . I don't know why i flashed this Zip file without check up the updater script .
i'll try to find a way by the web to resolve my problem and post it after here . Thanks all of you .
Click to expand...
Click to collapse
check for your fastboot status is it recognized by the pc?
if it is flash another recovery...sideload a ROM and you're done.
or
again with RUU but! .exe this time.
EXTREME MEASURE
also there is this old trick where you take a usb cable. cut off the head. have two wires naked and insert the through the charging panel.
this will trigger obligatory android recovery
another way to that recovery screen is less hazardous which is taking a hair blower have it on HOT and pointed to the back of the phone for several minutes.
you can check any of what i said in you tube or forums to elaborate on understanding it.
best of luck
2B_4G10 said:
check for your fastboot status is it recognized by the pc?
if it is flash another recovery...sideload a ROM and you're done.
or
again with RUU but! .exe this time.
EXTREME MEASURE
also there is this old trick where you take a usb cable. cut off the head. have two wires naked and insert the through the charging panel.
this will trigger obligatory android recovery
another way to that recovery screen is less hazardous which is taking a hair blower have it on HOT and pointed to the back of the phone for several minutes.
you can check any of what i said in you tube or forums to elaborate on understanding it.
best of luck
Click to expand...
Click to collapse
Thank you for your answer ! Nop i don't have any access with my pc to the fastboot and Ruu doesn't work cause my phone doesn't turn on .
I'll see for the old trick .
2B_4G10 said:
if it is flash another recovery...sideload a ROM and you're done.
Click to expand...
Click to collapse
No, flashing another recovery and a rom will not fix. mmcblk0p4 is a partition containing your CID, your IMEI some encrypted data. Flashing a rom will not restore this partition. Not sure what this partition is for, but flashing a ROM will not flash this partition.
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
hcrcorp said:
Thank you for your answer ! Nop i don't have any access with my pc to the fastboot and Ruu doesn't work cause my phone doesn't turn on .
I'll see for the old trick .
Click to expand...
Click to collapse
I don't think its fixable. better to send your phone for repair.
alray said:
No, flashing another recovery and a rom will not fix. mmcblk0p4 is a partition containing your CID, your IMEI some encrypted data. Flashing a rom will not restore this partition. Not sure what this partition is for, but flashing a ROM will not flash this partition.
---------- Post added at 02:16 PM ---------- Previous post was at 02:15 PM ----------
I don't think its fixable. better to send your phone for repair.
Click to expand...
Click to collapse
Thank for your answer i'll send it to SAV
Please i need help, i hard bricked my z1 c6903 ,restoring a backup with unlocked bootloader , this time the pone is totally dead. When in plugg in it blinks a red light.Im reading all about this and im a bit confused ,can anyone help me please?I really appreciate if u can.Best regards
SANTUMIL said:
Please i need help, i hard bricked my z1 c6903 ,restoring a backup with unlocked bootloader , this time the pone is totally dead. When in plugg in it blinks a red light.Im reading all about this and im a bit confused ,can anyone help me please?I really appreciate if u can.Best regards
Click to expand...
Click to collapse
Charge it for good 1-2 hours then flash stock firmware using flashtool..
kathanpatel1001 said:
Charge it for good 1-2 hours then flash stock firmware using flashtool..
Click to expand...
Click to collapse
Flashtools ,dont recognize my phone,it oly blinks red light when its charging
SANTUMIL said:
Flashtools ,dont recognize my phone,it oly blinks red light when its charging
Click to expand...
Click to collapse
Its most likely to be bad usb cable and or drivers..keep it on charger and use different usb cable also install drivers properly windows 8+ requires additional steps in driver installation google it..
kathanpatel1001 said:
Its most likely to be bad usb cable and or drivers..keep it on charger and use different usb cable also install drivers properly windows 8+ requires additional steps in driver installation google it..
Click to expand...
Click to collapse
Im on win7 64x,everything was ok after restore a rom from twrp,drivers was sucefully installed ,and after this brick i was able to use flashtools ,so.. i think usb cable and drivers are OK. When i plug it to wall or usb ,only blinks a red light ,i tryed several keys combinations and nothing happens.
SANTUMIL said:
Im on win7 64x,everything was ok after restore a rom from twrp,drivers was sucefully installed ,and after this brick i was able to use flashtools ,so.. i think usb cable and drivers are OK. When i plug it to wall or usb ,only blinks a red light ,i tryed several keys combinations and nothing happens.
Click to expand...
Click to collapse
plug it into the wall and leave it on charge overnight, don't touch it. Try connecting in the morning, should work.
AnrgKrshn said:
plug it into the wall and leave it on charge overnight, don't touch it. Try connecting in the morning, should work.
Click to expand...
Click to collapse
Thxs but the phone is dead,nothing that i search it works.:crying::crying: And btw i got bricked so many times on LB and always i could flash it again,this issue im surely it was for being ULB
SANTUMIL said:
Thxs but the phone is dead,nothing that i search it works.:crying::crying: And btw i got bricked so many times on LB and always i could flash it again,this issue im surely it was for being ULB
Click to expand...
Click to collapse
UB is usually easier to recover cause you can fastboot any custom kernel to recover the phone.
---------- Post added at 04:44 PM ---------- Previous post was at 04:36 PM ----------
http://forum.xda-developers.com/showthread.php?t=2574764
AnrgKrshn said:
UB is usually easier to recover cause you can fastboot any custom kernel to recover the phone.
---------- Post added at 04:44 PM ---------- Previous post was at 04:36 PM ----------
http://forum.xda-developers.com/showthread.php?t=2574764
Click to expand...
Click to collapse
Same issue with mine, tried all and nothing worked. Finally gave it to sony center and told that while upgrading to LP this happened. They replaced pcb , back panel etc and gave an almost new phone for free bcoz it was in warranty.
i used kingo root in PC to root the phone , then after when i reboot the phone, it was stuck with the logo fore ever..
then i unlocked the boot loader and then flashes it with kitkat stock firmware..
then downloaded the lollipop update in the phone , after installing it the phone didn't booted ..
i cant boot it manually, cant go to fast boot mode ..
it is just dead...
what can i do ..plz help.
not showing qhslk bulk when connected to pc but shows ----unknown usb device(device descriptor request failed)
Oh I think its hardbricked dude,because if bootloader is unlocked then we shouldn't do any official updates...
---------- Post added at 10:53 AM ---------- Previous post was at 10:51 AM ----------
Still u can try to charge it or connect it to pc and goto device manager in pc and see that if it showing qhslk bulk or not,...
Divesh ahuja said:
Oh I think its hardbricked dude,because if bootloader is unlocked then we shouldn't do any official updates...
---------- Post added at 10:53 AM ---------- Previous post was at 10:51 AM ----------
Still u can try to charge it or connect it to pc and goto device manager in pc and see that if it showing qhslk bulk or not,...
Click to expand...
Click to collapse
nope..... not showing ......
Then what is it showing in pc??
Divesh ahuja said:
Then what is it showing in pc??
Click to expand...
Click to collapse
it shows ..
unknown usb device(device descriptor request failed)
i tried the blank flash but during the blank flash error occurs ..
cant install the specified driver for the blank flash..
Then its hardbricked bro,replace motherboard or sell it its body parts who needs or in the market
Just a few general ideas - probably won't help but you never know:
Leave it charging for several hours and then see if you can access fastboot
Try a different PC (including one that you've never plugged your phone into before, one with a different Windows version, etc.) to see if you can get it to recognise the phone as qhslk bulk
Try plugging the device into your PC using a different USB cable to see if you can get it to recognise the phone as qhslk bulk
Have a look around the web on guides for restoring a hard-bricked Moto G 2014 (specific model, type, etc.). This probably won't work but anything is worth a try. You could try following these on different PCs, with different USB cables, etc.
I think this problem was caused by trying to downgrade your phone to KitKat
Hope you get it working
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Steliyos said:
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Click to expand...
Click to collapse
post stat of your phone -->
1. flashmode & fastboot working?
2. LED when power key is pressed?
3. what rom you flashed?
DectonX said:
post stat of your phone -->
1. flashmode & fastboot working?
2. LED when power key is pressed?
3. what rom you flashed?
Click to expand...
Click to collapse
none of them is working
led isn't working too
DU10.5
yes you can fix your hard brik xperia z1
Steliyos said:
my z1 doesn't boot or charging
this happened after flashing a custom rom
can i recover it ??
what should i find a replacment for the motherboard ?
sorry for my bad english
hope to find any one to help
Click to expand...
Click to collapse
i was facing the same problem with my z1 c6902
only red led while charging
no sony logo
no fastboot mode
pc recognize it in flash mode
how i solved it?
i used xperia companion,
connect your z1 with pc
select repair software
follow the instructions you'll get yur z1 unbricked
vjluvanee said:
i was facing the same problem with my z1 c6902
only red led while charging
no sony logo
no fastboot mode
pc recognize it in flash mode
how i solved it?
i used xperia companion,
connect your z1 with pc
select repair software
follow the instructions you'll get yur z1 unbricked
Click to expand...
Click to collapse
ok the device is seen by the computer but it doesn't boot to download mode
when i connect it shows that there is a device connected to the computer but it's shown as it's a usb input device
can u help me with this?
Have you installed drivers!
---------- Post added at 08:42 PM ---------- Previous post was at 08:40 PM ----------
Steliyos said:
ok the device is seen by the computer but it doesn't boot to download mode
when i connect it shows that there is a device connected to the computer but it's shown as it's a usb input device
can u help me with this?
Click to expand...
Click to collapse
Drivers are installed?
Which os u r using?
vjluvanee said:
Have you installed drivers!
---------- Post added at 08:42 PM ---------- Previous post was at 08:40 PM ----------
Drivers are installed?
Which os u r using?
Click to expand...
Click to collapse
yes of course it's
windows 10 -64 bit
If PC recognizes your phone, can you use that to boot into fastboot mode?
Either use adb command "adb reboot fastboot" in PC
Or press and hold VOLUME_UP button then connect your phone to PC via USB (should see blue LED)