Hi so I bought a used captivate off of ebay and tried to flash to stock (baseband was different) using the AIO tool but it was stuck and got bricked. I am now able to get into the download mode screen but I am not sure what to do next? If I use AIO again it says I need USB debugging mode so what do I do now?
Please help
USB debbugging is not need to use Odin. It just needs download mode (USB debugging is need to for master clear). And your are not bricked, your softbricked.
Sent from my SGH-I897 using XDA App
download Odin3 1 click. it will get you to stock without having to deal with the aio stuff. after it's downloaded, make sure it's running BEFORE you plug your phone to the computer. (phone should be in download mode). then click start and dont touch anything. advisable to to master clear after that. to master clear, phone is on and in debegging mode when plugged in.
Thanks for the replys, Ill try it. I was confused about the different types of Odin softwares but I will try that then.
Jackman, Odin one click is included in aio he just needs to ignore the USB debugging stuff.
Sent from my SGH-I897 using XDA App
speedy_11, I have tried the AIO one click and when i click start it reads
"<OSM> All threads completed. (succeed 0/ failed 0)"
I just downloaded the standalone oden executable and it is doing something when i press the start. I can see a progress bar on the phone so I have hope.
How long does odin 1click downloader usually take?
a few minutes make sure that it is connect to a usb that is directly connected to the motherboard
yes, I have it connected to my motherboard but the progress have been idle for the last ten minutes. the log message reads.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
It has been like that for a while now
Try aging sometimes mine gets stuck like that. take out the battery and go back into download. and have Odin open before like jack man said.
I retried and it got stuck a little further than last time. I think I will keep retrying.
What does the master clear button do? the Original Odin 1 click states how to use it but doesn't explain what it is.
Thanks again for the help.
Thanks alot speedy and jack. I got it to finanally go stock. Had to try over half a dozen time. and worked the minute i switched a usb port.
it deletes everything off your phone, but your phone needs to be on and have usb debugging on to work. Are you using a Samsung data cable?
Try using the odin one click back to stock by designgears in the development section
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I hope i have this in the right place....
I have recently successfully flashed odin one click to KJ3 stock with GB bootloaders and now when i have the debugging mode checked green and plug into the PC, it does not go into debugging mode.....
Im using samsung data cable and from the looks and feel of everything the entire phone is working just fine except for the debugging part....
Do i need to re-flash again back to a different rom all together?
Also one last question if you guys don't mind....i lost root when i moved from Froyo 2.2 KB2 to GB 2.3.5 Kj3.....can i use the same root method as i did with the Froyo?
For the debugging issue, try turning off the debugging, then go back to USB settings and select Mass storage, back out and turn on debugging. Now connect to ur computer and see if that helps.
For root, use the FuguRoot Mod or just use Heimdall or Odin to flash a Kernel (one of at least the kj3 base that u r on) that has Root baked in. Or just use SuperOneClick.
Sent by XDA Premium App
grrr
tried the mass storage thing and still nothing....
Also i found the KJ3 Boog kernel w/CWM...however i still need to wait til i get the debugging issue sorted out....grrr
Not 100% sure but i dont think i need to set my phone to Kies then debugging right?
your phone has to be unplugged for you to enter debugging mode, so no, kies mode is not required.
so wait, what exactly is your issue now? debugging mode doesnt work, right?
how are you confirming that it does not work?
Correct "Bloodskin": Debugging mode doesn't show up in status bar like it used to. (it used to give me the choice after plugging into PC between selecting "Debugging Mode" OR "USB Connection") I generally leave the USB setting on "Mass Storage" while also having the "Debugging Mode" checked
Now even with all of the "mentioned" possibilities that have now been explored...still no option shows up for me to select actual "Debugging Mode"
I have noticed that "Download Mode" is working equally as would "Debugging Mode" (only used when flashing .tar files via Odin)
I have gotten around this issue but it still stands that the Debugging option does not show up in the status bar after plugging into the PC. So there is no rush on finding the cause...(just simply confused is all lol)
Thank you in advance for everything thus far and still to come if any...?!
Here, use this http://forum.xda-developers.com/showthread.php?t=1266172
total stock, every time.
Scothran3 said:
Correct "Bloodskin": Debugging mode doesn't show up in status bar like it used to. (it used to give me the choice after plugging into PC between selecting "Debugging Mode" OR "USB Connection") I generally leave the USB setting on "Mass Storage" while also having the "Debugging Mode" checked
Now even with all of the "mentioned" possibilities that have now been explored...still no option shows up for me to select actual "Debugging Mode"
I have noticed that "Download Mode" is working equally as would "Debugging Mode" (only used when flashing .tar files via Odin)
I have gotten around this issue but it still stands that the Debugging option does not show up in the status bar after plugging into the PC. So there is no rush on finding the cause...(just simply confused is all lol)
Thank you in advance for everything thus far and still to come if any...?!
Click to expand...
Click to collapse
I think I'm catching on to the issue; if I'm way off please forgive me.
USB debugging shows up in the status bar, but it is not something you select. It is just a notification that lets you know that it is on. A lot of custom ROMs turn the notification off because most of us just leave it on all the time, so it's annoying to have the notification any time the USB cord is plugged in. If you do click it, it just takes you to the development menu where you can turn it off. Unless you're trying to turn it off, selecting debugging from the notification bar isn't necessary, since if you have the notification debugging is already on.
Under settings / applications / development, is the USB Debugging box checked? If it is, debugging mode should be active. Depending on the ROM, there may or may not be an icon in the status bar. Have you tried using ADB without the icon to verify whether it is in fact working?
Ahh yes you are right "3" ...right on the money!!!
that makes perfect sense..and yes it is always checked for me. Like you said we tend to leave it on all the time. Although i have not tried to see if it is actually working or not i truly believe you will be correct. Headed home now and will check when i get there.
Adam...thank you!! lookin forward to you guys next release of andromedas full package.
Ty both for your time with me!
Sent from my SAMSUNG-SGH-I897 using XDA App
hi guys
i dont know wats wrong after clicking run.bat n hitting enter nothing happens to my note =_=!!
i had just downgraded my rom to KL3
"unknown resources" is checked
"disable usb debugging" is unchecked
---waiting for device---
daemon not running. starting it now
daemon started successfully.
nothing happens after that =(
someone kindly guide me in what did i missed out..
loveudear said:
hi guys
i dont know wats wrong after clicking run.bat n hitting enter nothing happens to my note =_=!!
i had just downgraded my rom to KL3
"unknown resources" is checked
"disable usb debugging" is unchecked
---waiting for device---
daemon not running. starting it now
daemon started successfully.
nothing happens after that =(
someone kindly guide me in what did i missed out..
Click to expand...
Click to collapse
1. The option on mine is simply 'USB Debugging' and it should be checked to be enabled. Ensure this is set properly.
2. ADB drivers installed? Kies is shut down? Also make sure that you are not connecting to transfer files in the notification that pops up.
3. Try a different USB port.
Those are my suggestions.
beestee said:
1. The option on mine is simply 'USB Debugging' and it should be checked to be enabled. Ensure this is set properly.
2. ADB drivers installed? Kies is shut down? Also make sure that you are not connecting to transfer files in the notification that pops up.
3. Try a different USB port.
Those are my suggestions.
Click to expand...
Click to collapse
zerg r runnning i did not checked the box "usb debugging"
now its running but i failed to root.. i got the same error from dr.kre post #9
my android ver 2.3.6..
http://forum.xda-developers.com/showthread.php?t=1329360
i tried twice n it still failed..
i downgrade rom using pc odin from LA1 to KL3..
gosh i m going bonkers =(
how do i know if my hp was rooted if just by looking at kernel ver? ie, [email protected] ?
I was trying to put TWRP on my gear, but it didnt work and now usb debugging option is not under settings the option is just gone, any ideas?
7pd3 said:
I was trying to put TWRP on my gear, but it didnt work and now usb debugging option is not under settings the option is just gone, any ideas?
Click to expand...
Click to collapse
Did you enable it by tapping on build number or Version number 5+ times?
I am on the stock, rooted rom. I just got the OTA. But I need to flash reflash the stock recovery since I am rooted and on TWRP. But I can't seem to get USB debugging to work. I've tried rebooting both my PC and my phone, different ports, tried enabling and disable USB debugging in developer options, even tried resetting to default settings. But adb devices still shows blank on my PC. Any idea what is the issue? I usually got a pop up to show that ADB is being requested and I will have to agree to it but I cant seem to get that popup now.
sacredsoul said:
I am on the stock, rooted rom. I just got the OTA. But I need to flash reflash the stock recovery since I am rooted and on TWRP. But I can't seem to get USB debugging to work. I've tried rebooting both my PC and my phone, different ports, tried enabling and disable USB debugging in developer options, even tried resetting to default settings. But adb devices still shows blank on my PC. Any idea what is the issue? I usually got a pop up to show that ADB is being requested and I will have to agree to it but I cant seem to get that popup now.
Click to expand...
Click to collapse
I had similar problem before. Try this, with no Connection to PC, revoke usb debug authorisations, and restored default in deverloper option, setbupn USB debug again then connect to PC . if that don't work , try rebooting pc
Sent from my SM-T819 using Tapatalk
I got an Xperia 10 to flash /e/ OS on. I've got the bootloader unlocked. I had dev options turned on and accepted the RSA key, and tried to flash a recovery. It didn't seem to go through so I rebooted the phone. Now it won't prompt to authorize USB debugging, I deleted the RSA key on computer thinking maybe it was that. I've booted up usb with mAid and tried to get it to prompt for an RSA key on the computer with no luck. I've even tried going to a different computer altogether. I've also done some of the basic commands, kill-server, start-server, reconnect. I've reset the phone twice. One thing I've noticed is that usb debugging stays on even after a factory reset. Do I try locking and unlocking the bootloader again ? I'm not sure what else to do, has anyone else encountered this and overcame it?