Database Develop

HTC ONE M7 3.62.771.3 S-ON stock rom

Hello, i need stock HTC ONE M7 3.62.771.3 S-ON rom and recovery. I can't find it on the internet. Maybe anyone have same model with stock rom? Thanks.

I found this:
htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
Is it good for me?
My bootloader getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.771.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4276mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse

Anybody could help? Has anyone same model?

pacinoalas said:
Anybody could help? Has anyone same model?
Click to expand...
Click to collapse
it will work if you get s-off first
you can't downgrade without s-off
http://rumrunner.us/

clsA said:
it will work if you get s-off first
you can't downgrade without s-off
http://rumrunner.us/
Click to expand...
Click to collapse
tried to s-off with rumrunner, but after Pouring (8) it says to pray and try again. After all "pourings" I'm getting new DOS windows with "adbd cannot run as root in preduction builds". Tried about 6 times, but same result. USB drivers are up to date. I have root on my phone and granted permission.

Anyone?

Just the two of us!
pacinoalas said:
Anyone?
Click to expand...
Click to collapse
It appears it's just me and you.
I bought a phone on e-bay, now USB port is (sort of) dead. Only charges when turned off.
I need to restore stock (locked, remove "tampared", unrooted, etc) so have it serviced.
I have literally put everything else in my life on hold to take care of this. Spend entire holiday!
I need this rom for ue with rumrunner/moonshine, etc... I'm still on S-ON...
Why do you need this particular rom?
---------- Post added at 10:22 PM ---------- Previous post was at 10:06 PM ----------
Also, see this post...
http://forum.xda-developers.com/showthread.php?t=2487888&page=52

spereree said:
It appears it's just me and you.
I bought a phone on e-bay, now USB port is (sort of) dead. Only charges when turned off.
I need to restore stock (locked, remove "tampared", unrooted, etc) so have it serviced.
I have literally put everything else in my life on hold to take care of this. Spend entire holiday!
I need this rom for ue with rumrunner/moonshine, etc... I'm still on S-ON...
Why do you need this particular rom?
---------- Post added at 10:22 PM ---------- Previous post was at 10:06 PM ----------
Also, see this post...
http://forum.xda-developers.com/showthread.php?t=2487888&page=52
Click to expand...
Click to collapse
Rooted my phone and after some time i noticed that in one place (big line) my screen isn't working. Tried factory reset. It helped for one time, but after few minutes problem came again. Want to bring back to stock and remove tampered. If you will find please inform me.

pacinoalas said:
Rooted my phone and after some time i noticed that in one place (big line) my screen isn't working. Tried factory reset. It helped for one time, but after few minutes problem came again. Want to bring back to stock and remove tampered. If you will find please inform me.
Click to expand...
Click to collapse
OK, so I believe I've found what we need... here:
http://forum.xda-developers.com/showthread.php?t=2541082&highlight=not+charging
But first, you need S-off (if you haven't already) here is the link:
http://forum.xda-developers.com/showthread.php?t=2487888
I believe that should work!

spereree said:
OK, so I believe I've found what we need... here:
http://forum.xda-developers.com/showthread.php?t=2541082&highlight=not+charging
But first, you need S-off (if you haven't already) here is the link:
http://forum.xda-developers.com/showthread.php?t=2487888
I believe that should work!
Click to expand...
Click to collapse
I had found these already, but rumrunner didn't worked for me. Like i said, there is problem for me with pourings. When you'll try rumrunner post here.

Phone very messed up -- HELP!!

OK, So I tried flashing in TWRP 2.6.3.4 to flash the latest version of ViperOne. When that didn't work, it asked me to update to 2.6.3.3, which I did, not thinking at all that it wasn't for my device, and that seems to have royally messed up my phone.
I can't get data on the few ROMs that I can get to work (I managed to have a backup from about a month ago of ViperOne on my phone that I got to actually load up.) When it does work, it restarts itself about once a minute, it'll boot up, I'll be able to mess around with it for about a minute, and then it will reset, all the while not having data either (Mobile Network just says "Disconnected" under it.)
I have no idea what is wrong, and no idea how to fix this! I fear I may have a really expensive paper weight.... Any ideas how to fix this? I would be extremely happy if I could fix this problem.

Don't create multiple threads. Stick to old one
sent from my mobile device

SaHiLzZ said:
Don't create multiple threads. Stick to old one
sent from my mobile device
Click to expand...
Click to collapse
Sorry, I just figured different issue, so I would make a new thread. I will keep all updates confined to this thread from here on out.

Start with a fastboot getvar all output. Soff? Bootloader locked or unlocked?
sent from my mobile device
---------- Post added at 10:31 PM ---------- Previous post was at 10:30 PM ----------
Remove imei/sn from output
sent from my mobile device

SaHiLzZ said:
Start with a fastboot getvar all output. Soff? Bootloader locked or unlocked?
sent from my mobile device
---------- Post added at 10:31 PM ---------- Previous post was at 10:30 PM ----------
Remove imei/sn from output
sent from my mobile device
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.55.0000
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 3.04.651.2
version-misc: PVT SHIP S-ON
serialno: --
imei: --
meid: --
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4108mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-371c4f408e
hbootpreupdate: 11
gencheckpt: 0
I'm S-ON, and bootloader is unlocked I assume, as if I remember correctly I unlocked it when originally rooting my phone.
Edit: The part that I think may have caused all of this headache in the first place. When trying to install ViperOne 5.0.0 through 2.6.3.4, it suggested that I install TWRP 2.6.3.3, which isn't for the Sprint HTC One, without thinking I just went ahead and installed it. I'm not sure how big of a deal that could cause, as it just wouldn't boot to recovery, but maybe that broke something internally that needs to be fixed.

Restart from scratch. http://forum.xda-developers.com/showthread.php?t=2508907
will need to use the official RUU listed there. Relock the bootloader and run RUU.
sent from my mobile device
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
You can connect in fastboot mode and run RUU. No need to be in the OS
sent from my mobile device

SaHiLzZ said:
Restart from scratch. http://forum.xda-developers.com/showthread.php?t=2508907
will need to use the official RUU listed there. Relock the bootloader and run RUU.
sent from my mobile device
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
You can connect in fastboot mode and run RUU. No need to be in the OS
sent from my mobile device
Click to expand...
Click to collapse
And then from there will I need to re-root my phone? Or will I stay rooted doing this? Thank you so much for the help, I am currently downloading the official RUU.

You will be starting fresh. Yes re-root and all
sent from my mobile device

Update?
sent from my mobile device

[Q] (HELP) M7 stock in bootloader USB debugging off

Hello.
I have a big problem with my HTC one. I wanted to install RUU on my phone. I downgraded hboot from 1.56 to 1.44. I relocked bootloader. After this I flashed RUU 4.19.401.9 without any problem. My HTC started updating of all my apps. After this started to do software update. After reboot phone stock in bootloader with ACTIVE CMDLINE OVERFLOW! (1085 Bytes). Hboot came back to 1.56. New software disabled USB Debugging.
I already unlocked bootloader and installed twrp 2.7.1.1 but when I try to go to recovery phone automatically go to bootloader. I also tried to install RUU again but no luck.
Can anyone help with this problem please?
Thank you.

tomekm250 said:
Hello.
I have a big problem with my HTC one. I wanted to install RUU on my phone. I downgraded hboot from 1.56 to 1.44. I relocked bootloader. After this I flashed RUU 4.19.401.9 without any problem. My HTC started updating of all my apps. After this started to do software update. After reboot phone stock in bootloader with ACTIVE CMDLINE OVERFLOW! (1085 Bytes). Hboot came back to 1.56. New software disabled USB Debugging.
I already unlocked bootloader and installed twrp 2.7.1.1 but when I try to go to recovery phone automatically go to bootloader. I also tried to install RUU again but no luck.
Can anyone help with this problem please?
Thank you.
Click to expand...
Click to collapse
Read here
http://forum.xda-developers.com/showthread.php?t=2739126

bored_stupid said:
Read here
http://forum.xda-developers.com/showthread.php?t=2739126
Click to expand...
Click to collapse
Thanks for quick answer.
Unfortunately I did not find the solution. I flashed nobcb twrp recovery and I also erased cache but still no luck. After reboot phone come back to bootloader and when i try to open recovery going back to bootloader with same overflow commend.
This is my log:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH38xxxxxxx
(bootloader) imei: 35xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4275mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

tomekm250 said:
Thanks for quick answer.
Unfortunately I did not find the solution. I flashed nobcb twrp recovery and I also erased cache but still no luck. After reboot phone come back to bootloader and when i try to open recovery going back to bootloader with same overflow commend.
This is my log:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH38xxxxxxx
(bootloader) imei: 35xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4275mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Try reflashing hboot 1.44.
seems like most Active Command Overflows are related to hboot 1.56

I can't reflasing hboot because I can't use adb
Maybe there is another way to reflasing it without using adb commends?

tomekm250 said:
I can't reflasing hboot because I can't use adb
Maybe there is another way to reflasing it without using adb commends?
Click to expand...
Click to collapse
You dont need USB debugging on to flash an hboot.
Put hboot into adb/fastboot folder and press shift/rh mouse and open command window here
Flash/Install like firmware:
Boot to bootloader:
adb reboot-bootloader
Reboot RUU mode via fastboot:
fastboot oem rebootRUU
Flash the firmware:
fastboot flash zip 1.29.401.12_hboot_1.44.zip
After it finishes, execute the command again to complete the flash:
fastboot flash zip 1.29.401.12_hboot_1.44.zip

bored_stupid said:
You dont need USB debugging on to flash an hboot.
Put hboot into adb/fastboot folder and press shift/rh mouse and open command window here
Flash/Install like firmware:
Boot to bootloader:
adb reboot-bootloader
Reboot RUU mode via fastboot:
fastboot oem rebootRUU
Flash the firmware:
fastboot flash zip 1.29.401.12_hboot_1.44.zip
After it finishes, execute the command again to complete the flash:
fastboot flash zip 1.29.401.12_hboot_1.44.zip
Click to expand...
Click to collapse
Thank you very much for your time and help. After I put this command I changed hboot to 1.44. Now I installed RUU again. What can I do now to do not come back to the same point because phone asking for an update.
Thank you again

I personally would go with a custom rom, ' ARHD or Viper rom' both are stock only better and fully up to date..
Sent from my HTC One using XDA Premium 4 mobile app

tomekm250 said:
Thank you very much for your time and help. After I put this command I changed hboot to 1.44. Now I installed RUU again. What can I do now to do not come back to the same point because phone asking for an update.
Thank you again
Click to expand...
Click to collapse
Fix your misc partition first

nkk71 said:
Fix your misc partition first
Click to expand...
Click to collapse
I installed ARHD 71.1 but I have problem with it. When I press home button phone takes it like I would press it many times and going to Google searching. That happens not all the time but very often. (That was reason I wanted to come back to stock rom). I will try Viper rom now for a change.
@nkk71 Could you please tell me some more how to fix misc partition? I don't know how to do it.
Thanks very much guys for your help.

Read here
http://androidboom.org/threads/fix-...ive-cmdline-overflow-error-and-bootloop.6925/
Sent from my HTC One using XDA Premium 4 mobile app

bored_stupid said:
Read here
http://androidboom.org/threads/fix-...ive-cmdline-overflow-error-and-bootloop.6925/
Click to expand...
Click to collapse
hmm, how did that end up there
tomekm250 said:
I installed ARHD 71.1 but I have problem with it. When I press home button phone takes it like I would press it many times and going to Google searching. That happens not all the time but very often. (That was reason I wanted to come back to stock rom). I will try Viper rom now for a change.
@nkk71 Could you please tell me some more how to fix misc partition? I don't know how to do it.
Thanks very much guys for your help.
Click to expand...
Click to collapse
download and "dd" the generic misc partition as mentioned here: http://forum.xda-developers.com/showthread.php?t=2739126
and I didnt understand the home button problem, can you explain simpler? what do you want the home button to do?

nkk71 said:
Fix your misc partition first
Click to expand...
Click to collapse
nkk71 said:
hmm, how did that end up there
download and "dd" the generic misc partition as mentioned here: http://forum.xda-developers.com/showthread.php?t=2739126
and I didnt understand the home button problem, can you explain simpler? what do you want the home button to do?
Click to expand...
Click to collapse
Problem with home button: when I press home button phone should come back to desktop and vibrate once. When I press this button I feel my phone vibrate about 3 times like I would press it 3 times but I press only once. And do not come back to desktop but going to Google search. You can go there by holding home button for few seconds.

tomekm250 said:
Problem with home button: when I press home button phone should come back to desktop and vibrate once. When I press this button I feel my phone vibrate about 3 times like I would press it 3 times but I press only once. And do not come back to desktop but going to Google search. You can go there by holding home button for few seconds.
Click to expand...
Click to collapse
Strange, I'm running ARHD 71.1 on my phone, and have Home button set to "Swipe up for Google Now, press and hold for menu" (in Settings -> Display, gestures & buttons)
and works fine:
1- one tap -> back to home screen
2- swipe up -> Google Now
3- press and hold -> menu
4- double-tap -> Recent Apps

nkk71 said:
hmm, how did that end up there
Click to expand...
Click to collapse
I don't know, I assumed you knew of it.. Well at least the OP is in safe hands now your here
Sent from my HTC One using XDA Premium 4 mobile app

bored_stupid said:
I don't know, I assumed you knew of it.. Well at least the OP is in safe hands now your here
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
nope didn't know about that site, i'm only a member on xda
can't even "browse" that site, takes about 3~4 minutes (seriously) for a page to open

nkk71 said:
nope didn't know about that site, i'm only a member on xda
can't even "browse" that site, takes about 3~4 minutes (seriously) for a page to open
Click to expand...
Click to collapse
Then I think the site needs to know.. They should at least have your permission
Sent from my HTC One using Xparent Skyblue Tapatalk 2

Thanks guys for your massive help. You help me to save my phone. I decided to instal Viper rom (working nice). I take off screen protector. Now I think that caused problem with home button.
Just last question. I checked bootloader and I have hboot 1.44 version. Should I change it to 1.56 or just leave it?
Thank you very much again.

bored_stupid said:
Then I think the site needs to know.. They should at least have your permission
Sent from my HTC One using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
well at least they didn't change the username, and looks like a bot or something, and with a whopping :silly: 19 members, I don't think I'll bother being number 20
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

nkk71 said:
well at least they didn't change the username, and looks like a bot or something, and with a whopping :silly: 19 members, I don't think I'll bother being number 20
Click to expand...
Click to collapse
YEAH I prefer to interact with more members than that too, I just used it to help the OP..
To the OP... Your S-Off so hboot version is up to you, I'm still on hboot 1.44 with no ill effects.. Do be aware though that the Active Command Overflow seems to be confined to hboot 1.56
Sent from my HTC One using Xparent Skyblue Tapatalk 2

[Q] In Deep Trouble with MID Change. HELP PLEASE!!!

I tried changing my HTC One M8_WHL PVT SHIP S-OFF into developer edition using the guide on http://htc-one.wonderhowto.com/how-...edition-for-super-fast-sense-updates-0156524/ . I successfully changed the MID and the CID without breaking a sweat. After, I used TWRP to restore the backup which the guide instructed me to download and restore. After restoring that backup, device could only boot HBOOT. Now I tried running the RUU.exe for Developer Edition and I get the error which asks that I run the correct RUU for the device. Now, the device doesn't boot pass HBOOT
What I can do ...
1. Boot into TWRP recovery
2. Give fastboot commands with HBOOT
3. Boot into RUU via fastboot
What I can't do ...
1. Boot the device
2. Revert the MID change to its original state cos I will need to run ADB Shell to do that, which cannot be done from HBOOT
3. No RUU.exe is responding to flashing the device
The specific help I need ...
1. Be able to Change MID using Fastboot so I can run a SPRINT RUU
fastboot getvar all results ...
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: Mod Edit
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: Mod Edit
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: BS_US002
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
PLEASE HELP!

You forgot the most important thing to do before doing something like this....read.
Your M8 must be a GSM model, like AT&T, T-Mobile, and most international variants.
Click to expand...
Click to collapse
Have you tried running the command to change the MID while booted to twrp?

As I have been using my GSM SIM in it, it didn't occur to me that it could be any different from a GSM Model. When I bought it, it came with S-Off and CID 11111111, though the bootloader was locked (like any other locked HBOOT from factory, not relocked).

BD619 said:
You forgot the most important thing to do before doing something like this....read.
Have you tried running the command to change the MID while booted to twrp?
Click to expand...
Click to collapse
Kindly show me direct me to a thread on how I can change the MID while booted to twrp. Thank you.

Economistaterry said:
My M8 is a GSM Model. I use to use my GSM SIM in it.
Click to expand...
Click to collapse
HTC One M8_WHL
Click to expand...
Click to collapse
is Sprint which is CDMA not GSM.
You said in your first post you could not revert your MID because you can't run adb shell... adb works in recovery...it's worth a shot.

Try changing your CID to SuperCID then try the Sprint RUU.

BD619 said:
is Sprint which is CDMA not GSM.
You said in your first post you could not revert your MID because you can't run adb shell... adb works in recovery...it's worth a shot.
Click to expand...
Click to collapse
ADB Shell won't start in TWRP sideload. But ADB devices comes out positively with the list of devices attached.

BD619 said:
Try changing your CID to SuperCID then try the Sprint RUU.
Click to expand...
Click to collapse
This was one of my first options. Didn't work.

Economistaterry said:
This was one of my first options. Didn't work.
Click to expand...
Click to collapse
Have you tried changing it back to Sprint CID?

BD619 said:
Have you tried changing it back to Sprint CID?
Click to expand...
Click to collapse
I haven't. The device came with Super CID. Let me try that and see. However, I tried flashing the firmware of Sprint via RUU with Super CID. The MID error showed up. I feel same will happen even if I change to Sprint CID, but I'll give it a shot.

BD619 said:
Have you tried changing it back to Sprint CID?
Click to expand...
Click to collapse
No luck.

adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling TWRP i just tested it on v2.8.6 2015-04-22 p1
---------- Post added at 05:06 AM ---------- Previous post was at 05:00 AM ----------
Economistaterry said:
Kindly show me direct me to a thread on how I can change the MID while booted to twrp. Thank you.
Click to expand...
Click to collapse
here is the link(post #2 has code for sprint), please be very careful it can easily turn your M8 into a piece of aluminum.

Vcek said:
adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling TWRP i just tested it on v2.8.6 2015-04-22 p1
---------- Post added at 05:06 AM ---------- Previous post was at 05:00 AM ----------
here is the link(post #2 has code for sprint), please be very careful it can easily turn your M8 into a piece of aluminum.
Click to expand...
Click to collapse
Bookmarked thanks.

vcek said:
adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling twrp i just tested it on v2.8.6 2015-04-22 p1
---------- post added at 05:06 am ---------- previous post was at 05:00 am ----------
here is the link(post #2 has code for sprint), please be very careful it can easily turn your m8 into a piece of aluminum.
Click to expand...
Click to collapse
yes! Yes! You are a life saver! Thank you so much!
It worked! It worked!
Phone is back alive! Wheew!

Need your help to unbrick my Htc one M7

Hello,
I have a Htc one (M7) that is stuck in a bootloop. I first tried to find the solution in privious threads, but i could'nt find the right rom.
Thanks for your help.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.22.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.111.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3**********
(bootloader) imei: 354*************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.211s
- - - - - - - -
tampered
relocked
security warning
------
Please let me know if you need any further information.
And thanks a lot for your great work.

Any ideas mates ?
I tried to find a ruu.exe but i couldn't find it.

Anyone?
thank you

Unlock your bootloader... Maybe gonna fix it
Wysłane z mojego One przy użyciu Tapatalka

123-Quest said:
Hello,
I have a Htc one (M7) that is stuck in a bootloop. I first tried to find the solution in privious threads, but i could'nt find the right rom.
Thanks for your help.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.22.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.111.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3**********
(bootloader) imei: 354*************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3828mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.211s
- - - - - - - -
tampered
relocked
security warning
------
Please let me know if you need any further information.
And thanks a lot for your great work.
Click to expand...
Click to collapse
If you have relocked the bootloader with a custom rom, custom recovery or custom kernel installed on your phone, it will bootloop. If this is what you did, yes unlocking the bootloader will probably fix your problem.

Stachura5 said:
Unlock your bootloader... Maybe gonna fix it
Wysłane z mojego One przy użyciu Tapatalka
Click to expand...
Click to collapse
Thank you and Dziękuję Stachura5.
Thank you alray.
I managed to unlock the bootloader.
Now I have no boot loop but I only get the white logo screen.
the good news is; i can now access the recovery menu.
To me, it seems as if there is no os at all. For this reason the first thing that came to my mind, is to search for the right rom.
again, thanks.
I

123-Quest said:
Thank you and Dziękuję Stachura5.
Thank you alray.
I managed to unlock the bootloader.
Now I have no boot loop but I only get the white logo screen.
the good news is; i can now access the recovery menu.
To me, it seems as if there is no os at all. For this reason the first thing that came to my mind, is to search for the right rom.
again, thanks.
I
Click to expand...
Click to collapse
Good to hear that it helped. I had the same problem with my One after relocking the bootloader, so I had to unlock it again [emoji4]

Stachura5 said:
Good to hear that it helped. I had the same problem with my One after relocking the bootloader, so I had to unlock it again [emoji4]
Click to expand...
Click to collapse
Yes it helped, no boot loop , and i can access recovery menu. / the full half of the glas. , now I think I should find the right custom rom; right?

123-Quest said:
Yes it helped, no boot loop , and i can access recovery menu. / the full half of the glas. , now I think I should find the right custom rom; right?
Click to expand...
Click to collapse
Yes, now you need a ROM. Find one that suits your liking & try to put it (somehow) on the phone [emoji4]

Stachura5 said:
Yes, now you need a ROM. Find one that suits your liking & try to put it (somehow) on the phone [emoji4]
Click to expand...
Click to collapse
Anything suits me, as long as it´s working. : )
I tried 3 different run.exe roms, but i get an error notification.
should the ruu zip match my modelid and cid=
modelid: PN0710000
cidnum: 11111111
I have almost no experience in this kind of things, so maybe someone here could kindly suggest a specific rom.
thanks

I have a question please:
I am trying to flash the sense 7 rom using TWRP, do you think it suits my device?
thank you

123-Quest said:
I have a question please:
I am trying to flash the sense 7 rom using TWRP, do you think it suits my device?
thank you
Click to expand...
Click to collapse
Why shouldn't it? It's made for HTC devices [emoji4]

123-Quest said:
Anything suits me, as long as it´s working. : )
I tried 3 different run.exe roms, but i get an error notification.
should the ruu zip match my modelid and cid=
modelid: PN0710000
cidnum: 11111111
I have almost no experience in this kind of things, so maybe someone here could kindly suggest a specific rom.
thanks
Click to expand...
Click to collapse
What rom are your trying to flash, and how are you sending it to your phone?
---------- Post added at 12:22 PM ---------- Previous post was at 12:11 PM ----------
123-Quest said:
I have a question please:
I am trying to flash the sense 7 rom using TWRP, do you think it suits my device?
thank you
Click to expand...
Click to collapse
Sense 7 should work. Are you transferring the zip file from your computer to your phone internal memory or you are ADB pushing?

zainkool said:
What rom are your trying to flash, and how are you sending it to your phone?
---------- Post added at 12:22 PM ---------- Previous post was at 12:11 PM ----------
Sense 7 should work. Are you transferring the zip file from your computer to your phone internal memory or you are ADB pushing?
Click to expand...
Click to collapse
I tried to flash sense 7 from recovery/ side load, everything worked well, but then the touchscreen was too unresponsive. I am trying again now.
let's hope.
thank you

123-Quest said:
I tried to flash sense 7 from recovery/ side load, everything worked well, but then the touchscreen was too unresponsive. I am trying again now.
let's hope.
thank you
Click to expand...
Click to collapse
What do you mean by "touchscreen was too unresponsive"? Was it complitely unresponsive? You couldn't do anything with your phone?

donkeykong1 said:
What do you mean by "touchscreen was too unresponsive"? Was it complitely unresponsive? You couldn't do anything with your phone?
Click to expand...
Click to collapse
I mean I couldn't go to the next step using touchscreen, it must be some kind of bug. I am stuck again.

123-Quest said:
I mean I couldn't go to the next step using touchscreen, it must be some kind of bug. I am stuck again.
Click to expand...
Click to collapse
Not a bug. You have a very old h-boot. You will need to upgrade your phone in order to get newer touch drivers so your touchscreen can work

donkeykong1 said:
Not a bug. You have a very old h-boot. You will need to upgrade your phone in order to get newer touch drivers so your touchscreen can work
Click to expand...
Click to collapse
can you please give me a link, i don't even know what to look for.

123-Quest said:
can you please give me a link, i don't even know what to look for.
Click to expand...
Click to collapse
I need to get a hold of my laptop. If you can wait an hour or two till I get home, I will gladly help you

donkeykong1 said:
I need to get a hold of my laptop. If you can wait an hour or two till I get home, I will gladly help you
Click to expand...
Click to collapse
i am lucky to be here. thank you for your help.
I need to get up very early, so maybe i'll check your post tomorrow.
I learnt a lot of new things dealing with this issue/ again i really appreciate this wonderful atmosphere here.