Related
Hello,
I cannot find the download link for HTC One India RUU.
CID: cid_38
I downloaded RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe from somewhere but it throws 130 - Model ID Error.
Can anyone give me the download link of HTC One Asia India RUU?
HTC one ruu for CID_038
ssrij said:
Hello,
I cannot find the download link for HTC One India RUU.
CID: cid_38
I downloaded RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe from somewhere but it throws 130 - Model ID Error.
Can anyone give me the download link of HTC One Asia India RUU?
Click to expand...
Click to collapse
I am in a similar situation.. did you find the RUU for your phone? Please help.
Harvey Spectre said:
I am in a similar situation.. did you find the RUU for your phone? Please help.
Click to expand...
Click to collapse
Are you s-off? Then you can flash any RUU you want.
Sent from my iPod touch using Tapatalk
n1234d said:
Are you s-off? Then you can flash any RUU you want.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Appreciate the quick response
Don't I need to match my CID and MID with the RUU file? Is there an easy way to turn S-OFF?
Harvey Spectre said:
Appreciate the quick response
Don't I need to match my CID and MID with the RUU file? Is there an easy way to turn S-OFF?
Click to expand...
Click to collapse
Yep, get superCID, Use rumrunner for s-off (rumrunner.us)
Always use the thanks button
ssrij said:
Hello,
I cannot find the download link for HTC One India RUU.
CID: cid_38
I downloaded RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe from somewhere but it throws 130 - Model ID Error.
Can anyone give me the download link of HTC One Asia India RUU?
Click to expand...
Click to collapse
1. CID_38 isn't a valid CID, it'll start with HTC or with the initials of your carrier so please post your proper, FULL CID, e.g HTC__001
2. There isn't an 'India' RUU - it'll be the Asian model or the EU one
3. Run the command 'fastboot getvar all' and post the results (but remove your IMEI and serial number). We can then see what you actually need
Harvey Spectre said:
I am in a similar situation.. did you find the RUU for your phone? Please help.
Click to expand...
Click to collapse
Not yet, I SOFF'd so I can now load any RUU
EddyOS said:
1. CID_38 isn't a valid CID, it'll start with HTC or with the initials of your carrier so please post your proper, FULL CID, e.g HTC__001
2. There isn't an 'India' RUU - it'll be the Asian model or the EU one
3. Run the command 'fastboot getvar all' and post the results (but remove your IMEI and serial number). We can then see what you actually need
Click to expand...
Click to collapse
It's actually HTC__038
Yeah, it's actually got to be the Asian WWE, and I think it's also the same for the Singapore variant (India is supposed to be x.xx.720.x, but we have x.xx.707.x, the dual-sim variant has a x.xx.720.x)
---------- Post added at 10:10 PM ---------- Previous post was at 09:56 PM ----------
ssrij said:
Not yet, I SOFF'd so I can now load any RUU
Click to expand...
Click to collapse
You need
RUU Zip M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.zip
Google it. Now that you're s-off, you can restore an older RUU, and then you can take all the OTA's you get, all the way till 4.2.2, and 4.3 when it is released in India.
n1234d said:
It's actually HTC__038
Yeah, it's actually got to be the Asian WWE, and I think it's also the same for the Singapore variant (India is supposed to be x.xx.720.x, but we have x.xx.707.x, the dual-sim variant has a x.xx.720.x)
---------- Post added at 10:10 PM ---------- Previous post was at 09:56 PM ----------
You need
RUU Zip M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.zip
Google it. Now that you're s-off, you can restore an older RUU, and then you can take all the OTA's you get, all the way till 4.2.2, and 4.3 when it is released in India.
Click to expand...
Click to collapse
Here are my phone details:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.14.3250.13
version-cpld: None
version-microp: None
version-main: 1.29.707.4
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__038
battery-status: good
battery-voltage: 4197mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
Problem is I tried the steps below and now the phones almost close to being bricked:
- Relocked the phone
- The phone does not have an OS at the moment, but I am able to boot into bootloader and get to fastboot
- Installing the RUU you mentioned has not worked for me somehow. I keep getting an error
Do you think I should root it again and install Clockworkmod? Then somehow install the OS?
Harvey Spectre said:
Here are my phone details:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.14.3250.13
version-cpld: None
version-microp: None
version-main: 1.29.707.4
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__038
battery-status: good
battery-voltage: 4197mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
Problem is I tried the steps below and now the phones almost close to being bricked:
- Relocked the phone
- The phone does not have an OS at the moment, but I am able to boot into bootloader and get to fastboot
- Installing the RUU you mentioned has not worked for me somehow. I keep getting an error
Do you think I should root it again and install Clockworkmod? Then somehow install the OS?
Click to expand...
Click to collapse
Crap, you're yet s-on. Ok, sure, now that RUU won't work.
Go to fastboot mode and flash twrp recovery from your pc
Use an otg USB cable and flash a rom from your USB drive or side load a rom with twrp.
Post back once you're done.
Sent from my iPod touch using Tapatalk
n1234d said:
Crap, you're yet s-on. Ok, sure, now that RUU won't work.
Go to fastboot mode and flash twrp recovery from your pc
Use an otg USB cable and flash a rom from your USB drive or side load a rom with twrp.
Post back once you're done.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Sorry, not sure if I understand this?
"Use an otg USB cable and flash a rom from your USB drive or side load a rom with twrp."
Are you asking me to flash the ruu as is using the command "fastboot flash zip ruu.zip"? or?
Harvey Spectre said:
Sorry, not sure if I understand this?
"Use an otg USB cable and flash a rom from your USB drive or side load a rom with twrp."
Are you asking me to flash the ruu as is using the command "fastboot flash zip ruu.zip"? or?
Click to expand...
Click to collapse
Ooh, my bad. I didn't look at your info correctly.. Here is the RUU you need http://www.htc1guru.com/dld/ruu-zip...0-01_release_312087_signed_2_4_decrypted-zip/
What you need to do is flash this like a normal RUU after relocking your bootloader, if not locked already.
Sorry for complicating it so much in the previous posts
Sent from my iPod touch using Tapatalk
---------- Post added at 12:35 AM ---------- Previous post was at 12:33 AM ----------
And btw the previous RUU was for the OP
Sent from my iPod touch using Tapatalk
---------- Post added at 12:40 AM ---------- Previous post was at 12:35 AM ----------
Refer to this http://www.htc1guru.com/guides/return-stock-guide/
In the section Flashing an RUU zip to flash the zip you download.
Sent from my iPod touch using Tapatalk
n1234d said:
Ooh, my bad. I didn't look at your info correctly.. Here is the RUU you need http://www.htc1guru.com/dld/ruu-zip...0-01_release_312087_signed_2_4_decrypted-zip/
What you need to do is flash this like a normal RUU after relocking your bootloader, if not locked already.
Sorry for complicating it so much in the previous posts
Sent from my iPod touch using Tapatalk
---------- Post added at 12:35 AM ---------- Previous post was at 12:33 AM ----------
And btw the previous RUU was for the OP
Sent from my iPod touch using Tapatalk
---------- Post added at 12:40 AM ---------- Previous post was at 12:35 AM ----------
Refer to this http://www.htc1guru.com/guides/return-stock-guide/
In the section Flashing an RUU zip to flash the zip you download.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Haha!! I unlocked my phone again and it got back to the 4.2.2 version that I had on previously. I guess I had not cleared the cache and data on the phone
Next step will be to lock it and then install the RUU that you are referring to
This whole thing is new to me so I guess it is going to take a while and a few more experiments to get it right.
Thanks gain. This really helps
Harvey Spectre said:
Haha!! I unlocked my phone again and it got back to the 4.2.2 version that I had on previously. I guess I had not cleared the cache and data on the phone
Next step will be to lock it and then install the RUU that you are referring to
This whole thing is new to me so I guess it is going to take a while and a few more experiments to get it right.
Thanks gain. This really helps
Click to expand...
Click to collapse
Haha, amazing, you're welcome we all learn new stuff every day
Sent from my iPod touch using Tapatalk
n1234d said:
Haha, amazing, you're welcome we all learn new stuff every day
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
hi bro i am from india and my mobile is noth S-off and Super CID'ed to 111111 now i want to revert back to stock ROM please advice i am running on HBOOT- 2.23.0000
and my mobile is a dual sim indian version
Hi all this my first post and I am desprerately need your help. I have HTC ONE M7 2.24.707.3. My CID is HTC_038 and I have S-OFF. I want to return my phone to service station for repair and I am unable to find any RUU for my phone . Please help me. I am really a newbie so please guide me step by step. Thank You.
Im not going through this again, so read this thread here, this is not for the dual sim version, read it all first, it will guide you, its is for HTC__038 and HTC__044.
http://forum.xda-developers.com/showthread.php?t=2765514
Seanie280672 said:
Im not going through this again, so read this thread here, this is not for the dual sim version, read it all first, it will guide you, its is for HTC__038 and HTC__044.
http://forum.xda-developers.com/showthread.php?t=2765514
Click to expand...
Click to collapse
Thanks for your prompt reply. I forgot to mention that I have TWRP backup and aslo I have used the rooting method given on HTCONEROOT.COM.
That doesn't matter, it will get rid of all of that itself and return your phone to full stock.
Seanie280672 said:
That doesn't matter, it will get rid of all of that itself and return your phone to full stock.
Click to expand...
Click to collapse
I heve read both the thread and now I am currently downloading the 2 RUU's. Will update after I finish.
Small back story. Mom's phone. Cracked screen along time ago but doesn't have insurance. Then while installing OTA Update, phone got stuck at boot logo. Obviously can't do warranty with cracked screen so I decided to give it a try. Tried a factory reset and still stuck on boot logo.
Here's what Ive tried. I unlocked the bootloader. installed custom recovery. CWM and TWRP both tried with everything. I did a complete wipe through custom recovery, then tried to start fresh. I'm on a mac with parallels for windows 7. Couldn't get adb to work all the time so I've been using an OTG cable for installs. I've tried RUU.exe, ruu.zip. I've also tried custom rom's. I've even tried installing custom rom and then flashing the boot.img in fastboot. I've spent countless hours trying to get this thing to boot anything but to no avail. I tried to s-off but rumrunner wasn't working for me for some reason. Please help, as I will be greatly greatly appreciative. I've read tons of forums including htc1guru.com but nothing has worked so far. Thank you! So here is all the details on the phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35NW927559
(bootloader) imei: 355972*********(yes i did that)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4275mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Here is the bootload screen details if you need that too.
TAMPERED
UNLOCKED
M7_UL PVT SHIP S-ON RH
HBOOT 1.55.0000
RADIO-4A.21.3263.03
OpenDSP-v32.120.274.0909
OS-3.24.531.3
eMMC-boot 2048MB
Oct 4 2013, 17:31:32.0
Also, With either custom recovery, I can't get anything to mount except my usb through the OTG cable. Data, cache, system, nothing mounts.
Thanks again!
bradylr said:
Small back story. Mom's phone. Cracked screen along time ago but doesn't have insurance. Then while installing OTA Update, phone got stuck at boot logo. Obviously can't do warranty with cracked screen so I decided to give it a try. Tried a factory reset and still stuck on boot logo.
Here's what Ive tried. I unlocked the bootloader. installed custom recovery. CWM and TWRP both tried with everything. I did a complete wipe through custom recovery, then tried to start fresh. I'm on a mac with parallels for windows 7. Couldn't get adb to work all the time so I've been using an OTG cable for installs. I've tried RUU.exe, ruu.zip. I've also tried custom rom's. I've even tried installing custom rom and then flashing the boot.img in fastboot. I've spent countless hours trying to get this thing to boot anything but to no avail. I tried to s-off but rumrunner wasn't working for me for some reason. Please help, as I will be greatly greatly appreciative. I've read tons of forums including htc1guru.com but nothing has worked so far. Thank you! So here is all the details on the phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35NW927559
(bootloader) imei: 355972*********(yes i did that)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4275mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Here is the bootload screen details if you need that too.
TAMPERED
UNLOCKED
M7_UL PVT SHIP S-ON RH
HBOOT 1.55.0000
RADIO-4A.21.3263.03
OpenDSP-v32.120.274.0909
OS-3.24.531.3
eMMC-boot 2048MB
Oct 4 2013, 17:31:32.0
Also, With either custom recovery, I can't get anything to mount except my usb through the OTG cable. Data, cache, system, nothing mounts.
Thanks again!
Click to expand...
Click to collapse
What is your current recovery and version
Also which rom.zip did you try and flash
mb_guy said:
What is your current recovery and version
Also which rom.zip did you try and flash
Click to expand...
Click to collapse
CWM 6.0.4.6
Roms I've tried:
Maximus HD 32.0.0
Android Revolution HD 51.0
RUU Zip M7 UL JB43 SENSE50 MR TMOUS 3.24.531.3 Radio 4A.21.3263.03 10.38m.1157.04 Release 336982 Signed 2 Decrypted
Guru Reset M7 1.27.531.11 (Stock T-Mobile US ROM 1.27.531.11 with graphical aroma installer.)
bradylr said:
CWM 6.0.4.6
Roms I've tried:
Maximus HD 32.0.0
Android Revolution HD 51.0
RUU Zip M7 UL JB43 SENSE50 MR TMOUS 3.24.531.3 Radio 4A.21.3263.03 10.38m.1157.04 Release 336982 Signed 2 Decrypted
Guru Reset M7 1.27.531.11 (Stock T-Mobile US ROM 1.27.531.11 with graphical aroma installer.)
Click to expand...
Click to collapse
Was your bootloader relocked when you tried this ruu.exe
RUU Zip M7 UL JB43 SENSE50 MR TMOUS 3.24.531.3 Radio 4A.21.3263.03 10.38m.1157.04 Release 336982 Signed 2 Decrypted
Do you remember the error
Here is HTC download
For those looking to return their phones to stock or borked their phones trying to update firmware only without the appropriate ROM.
http://dl3.htc.com/application/RUU_M...igned_2(2).exe
I am not 100% sure of this but you may also need to flash stock recovery before running the ruu.
You can extract the recovery.img from the ruu and flash it before the ruu
mb_guy said:
Was your bootloader relocked when you tried this ruu.exe
RUU Zip M7 UL JB43 SENSE50 MR TMOUS 3.24.531.3 Radio 4A.21.3263.03 10.38m.1157.04 Release 336982 Signed 2 Decrypted
Do you remember the error
Here is HTC download
For those looking to return their phones to stock or borked their phones trying to update firmware only without the appropriate ROM.
Click to expand...
Click to collapse
No I haven't relocked my bootloader. I'll try this.
bradylr said:
No I haven't relocked my bootloader. I'll try this.
Click to expand...
Click to collapse
See my other comments on the last post re the htc download and stock recovery
---------- Post added at 04:02 PM ---------- Previous post was at 04:00 PM ----------
bradylr said:
No I haven't relocked my bootloader. I'll try this.
Click to expand...
Click to collapse
One other thing
Relocking the bootloader will delete data from phone
mb_guy said:
See my other comments on the last post re the htc download and stock recovery
---------- Post added at 04:02 PM ---------- Previous post was at 04:00 PM ----------
One other thing
Relocking the bootloader will delete data from phone
Click to expand...
Click to collapse
I click on the link you provided and it goes to an error page
bradylr said:
I click on the link you provided and it goes to an error page
Click to expand...
Click to collapse
I'll find the link again, but I think the one you had is the same.
---------- Post added at 04:31 PM ---------- Previous post was at 04:26 PM ----------
bradylr said:
I click on the link you provided and it goes to an error page
Click to expand...
Click to collapse
Here you go.
http://forum.xda-developers.com/showthread.php?t=2375223
You have to use the 3.24.531.3 ruu
the 1.27.531.3 is too old and is a downgrade to your phone, can't do without S-Off
bradylr said:
I click on the link you provided and it goes to an error page
Click to expand...
Click to collapse
Ok so I ran the ruu.exe from the link after I relocked it and it appeared to go through perfect. No error messages.
As the phone rebooted, it went right back to the htc splash screen and wont go anywhere from there, so once again, no boot.
I don't know if it makes a difference but I also have an HTC One M7 and my boot logo includes the HTC logo with "quietly brilliant" underneath, whereas the phone I'm working on doesn't have show quietly brilliant.
No worries, as hard as I have tried, you can't brick these things, it may seem hopeless, but there is always a way back. Flash a downgrade Hboot to like 1.44. Flash stock recovery. Find the T-Mobile zip that's in the forums. Flash. Should work.
mb_guy said:
I'll find the link again, but I think the one you had is the same.
---------- Post added at 04:31 PM ---------- Previous post was at 04:26 PM ----------
Here you go.
http://forum.xda-developers.com/showthread.php?t=2375223
You have to use the 3.24.531.3 ruu
the 1.27.531.3 is too old and is a downgrade to your phone, can't do without S-Off
Click to expand...
Click to collapse
Ok so I ran the ruu.exe after i re locked it, no boot
Then I flashed the stock recovery in the ruu.exe file but when trying to enter stock recovery, I just got a graphic of the htc one with a red triangle and exclamation mark.
Ignored it, ran ruu.exe again and of course nothing.
even thinghi
hack14u said:
No worries, as hard as I have tried, you can't brick these things, it may seem hopeless, but there is always a way back. Flash a downgrade Hboot to like 1.44. Flash stock recovery. Find the T-Mobile zip that's in the forums. Flash. Should work.
Click to expand...
Click to collapse
Thank you for that! I've considered myself a pretty determined guy but I am starting to get a little worried.
I'll try to downgrade Hboot. Any reading material for me on that process? I have been unsuccessful getting S-OFF and I thought you had to have S-OFF to downgrade Hboot
I really appreciate it guys, I know i'll get it, i'm just not use to having all these problems.
hack14u said:
No worries, as hard as I have tried, you can't brick these things, it may seem hopeless, but there is always a way back. Flash a downgrade Hboot to like 1.44. Flash stock recovery. Find the T-Mobile zip that's in the forums. Flash. Should work.
Click to expand...
Click to collapse
Maybe this helps. I tried to flash stock recovery again and I got this:
writing 'recovery'...
<bootloader> signiture checking...
FAILED <remote: signiture verify fail>
finished. total time: 2.683 seconds
bradylr said:
Maybe this helps. I tried to flash stock recovery again and I got this:
writing 'recovery'...
<bootloader> signiture checking...
FAILED <remote: signiture verify fail>
finished. total time: 2.683 seconds
Click to expand...
Click to collapse
Which ruu did you use? the one from htc or the one you had?
Just curious not sure that's the cause of anything, but it doesn't like something on the phone cause signature failed.
mb_guy said:
Which ruu did you use? the one from htc or the one you had?
Just curious not sure that's the cause of anything, but it doesn't like something on the phone cause signature failed.
Click to expand...
Click to collapse
Well the file that was in the link was just an .exe file and I don't know how to pull the recovery.img out of that. so I just used the .zip file on htc1guru.com website for the recovery image.
bradylr said:
Well the file that was in the link was just an .exe file and I don't know how to pull the recovery.img out of that. so I just used the .zip file on htc1guru.com website for the recovery image.
Click to expand...
Click to collapse
That recovery is too old, you need this one http://d-h.st/pVo
Will likely have to unlock bootloader to flash, then lock again to run the ruu
---------- Post added at 08:00 PM ---------- Previous post was at 07:47 PM ----------
bradylr said:
Maybe this helps. I tried to flash stock recovery again and I got this:
writing 'recovery'...
<bootloader> signiture checking...
FAILED <remote: signiture verify fail>
finished. total time: 2.683 seconds
Click to expand...
Click to collapse
This was because you flashed the old recovery. Flash the one I sent you (red triangle is normal) Then flash the ruu again, it can take 10-20 in for first boot
mb_guy said:
That recovery is too old, you need this one http://d-h.st/pVo
Will likely have to unlock bootloader to flash, then lock again to run the ruu
---------- Post added at 08:00 PM ---------- Previous post was at 07:47 PM ----------
This was because you flashed the old recovery. Flash the one I sent you (red triangle is normal) Then flash the ruu again, it can take 10-20 in for first boot
Click to expand...
Click to collapse
Ok followed it to the letter. unlocked bootloader, flashed stock recovery you gave me, relocked bootloader, rebooted phone, ran RUU.exe, phone rebooted, let it sit for 30 minutes but still no boot past htc splash screen.
Any ideas on what I can investigate? And please know, I really do appreciate the help.
bradylr said:
Ok followed it to the letter. unlocked bootloader, flashed stock recovery you gave me, relocked bootloader, rebooted phone, ran RUU.exe, phone rebooted, let it sit for 30 minutes but still no boot past htc splash screen.
Any ideas on what I can investigate? And please know, I really do appreciate the help.
Click to expand...
Click to collapse
No sorry, perhaps @nkk71 or @alray will help out tomorrow.
mb_guy said:
No sorry, perhaps @nkk71 or @alray will help out tomorrow.
Click to expand...
Click to collapse
Just another thought, wonder if its a bootloader issue cause of the ota failure, although I thought 1.55 was OK for 4.3
Try this
fastboot erase cache
install ruu again (the one downloaded from htc)
try a reboot, if it doesn't work lets try twrp recovery
unlock bootloader again
flash TWRP 2.6.3.4 recovery http://techerrata.com/browse/twrp2/m7ul
fastboot erase cache
Try a reboot at this point, if it hangs again try the arhd rom below
flash arhd 53 rom (essentially kitkat stock) http://forum.xda-developers.com/showthread.php?t=2183023
bradylr said:
CWM 6.0.4.6
Roms I've tried:
Maximus HD 32.0.0
Android Revolution HD 51.0
RUU Zip M7 UL JB43 SENSE50 MR TMOUS 3.24.531.3 Radio 4A.21.3263.03 10.38m.1157.04 Release 336982 Signed 2 Decrypted
Guru Reset M7 1.27.531.11 (Stock T-Mobile US ROM 1.27.531.11 with graphical aroma installer.)
Click to expand...
Click to collapse
Decrypted RUU need s-off to be flashed. That is why this one failed to install. With S-ON you need a signed ruu.exe or .zip and must be flashed in ruu mode with a locked/relocked bootloader.
Also ARHD from android 4.4 and up require TWRP 2.6.3.3 to be flashed, not sure if it will flash properly with CWM but ARHD thread specify to use TWRP 2.6.3.3 only. Did you cleared cache after flashing each rom and recovery?
---------- Post added at 06:42 PM ---------- Previous post was at 06:35 PM ----------
mb_guy said:
Was your bootloader relocked when you tried this ruu.exe
RUU Zip M7 UL JB43 SENSE50 MR TMOUS 3.24.531.3 Radio 4A.21.3263.03 10.38m.1157.04 Release 336982 Signed 2 Decrypted
Do you remember the error
Click to expand...
Click to collapse
You are right here. You must be locked/relocked to flash a ruu with s-on. Also remember that you need S-OFF to flash a decrypted RUU
mb_guy said:
I am not 100% sure of this but you may also need to flash stock recovery before running the ruu.
You can extract the recovery.img from the ruu and flash it before the ruu
Click to expand...
Click to collapse
Flashing stock recovery before flashing the ruu is not required. The stock recovery is flashed during the process. With S-ON the ruu will flash if all these conditions are present:
Bootloader must be locked/relocked
ruu must be signed with htc private key (not decrypted)
CID must match the ruu
MID must match the ruu
With S-OFF:
Bootloader can be locked/relocked/unlocked
ruu doesn't need to be signed
cid and mid must match
---------- Post added at 06:46 PM ---------- Previous post was at 06:42 PM ----------
bradylr said:
Ok so I ran the ruu.exe from the link after I relocked it and it appeared to go through perfect. No error messages.
As the phone rebooted, it went right back to the htc splash screen and wont go anywhere from there, so once again, no boot.
I don't know if it makes a difference but I also have an HTC One M7 and my boot logo includes the HTC logo with "quietly brilliant" underneath, whereas the phone I'm working on doesn't have show quietly brilliant.
Click to expand...
Click to collapse
If you didn't get any error message then the ruu should have flashed correctly. How much time did you waited on the ''htc splash screen'' ? First reboot after flashing a ruu can take up to 10 min to boot past the splash screen...
---------- Post added at 06:47 PM ---------- Previous post was at 06:46 PM ----------
hack14u said:
Flash a downgrade Hboot to like 1.44. Flash stock recovery. Find the T-Mobile zip that's in the forums. Flash. Should work.
Click to expand...
Click to collapse
hboot downgrade require S-OFF
---------- Post added at 06:50 PM ---------- Previous post was at 06:47 PM ----------
bradylr said:
Ok so I ran the ruu.exe after i re locked it, no boot
Then I flashed the stock recovery in the ruu.exe
Click to expand...
Click to collapse
The ruu already flashed the stock recovery. No need to flash it again...
bradylr said:
but when trying to enter stock recovery, I just got a graphic of the htc one with a red triangle and exclamation mark.
Click to expand...
Click to collapse
This screen with the exclamation mark IS the stock recovery. When on that screen you needs to press and hold VOL+ then hit power and release both buttons and the stock recovery menu will appear.
---------- Post added at 06:52 PM ---------- Previous post was at 06:50 PM ----------
bradylr said:
Maybe this helps. I tried to flash stock recovery again and I got this:
writing 'recovery'...
<bootloader> signiture checking...
FAILED <remote: signiture verify fail>
finished. total time: 2.683 seconds
Click to expand...
Click to collapse
You bootloader was relocked at that point, so you can't flash recovery!
Please post an updated ''fastboot getvar all'' and your bootloader status again. You should try to flash the ruu again, erase cache then boot the phone and wait at least 10-15 mins to see if it boots.
Btw sry for the very long post...
I was trying to S-OFF so installed CM11 but it never worked. I wanted to flash guru 5.11.401.10 and S-OFF there but it wouldnt go past "system is already unmôunted" and said "OS-" in bootloader! So I nandroid restored back to ARHD bût it still doesn't show OS.
What can I do????
I have an:
M7UL
HBOOT: 1.56 S-ON
here is getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ~
(bootloader) imei: ~
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3899mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
Please help
I've searched so much but to no avail
Close this thread please.
Ended up Sunshining and upgrading FW to latest and am now fixed.
So you had no OS and we're able to use sunshine? How tho? I am such at the bootloader with no OS and no recovery. My bootloader for some reason got locked and everything that I have come across doesn't seem to work. :crying:
---------- Post added at 05:42 AM ---------- Previous post was at 05:39 AM ----------
So you had no OS and we're able to use sunshine? How tho? I am such at the bootloader with no OS and no recovery. My bootloader for some reason got locked and everything that I have come across doesn't seem to work.
I didn't not have an OS. It's just that the number didn't show up in the boot loader. This number turned out to be the firmware number.
As I had a nandroid backup saved I used that to restore functionality to the phone and thankfully it was ARHD which able to be S-OFFed using Sunshine.
Have you tried unblocking the bootloader again?
ss4adib said:
I didn't not have an OS. It's just that the number didn't show up in the boot loader. This number turned out to be the firmware number.
As I had a nandroid backup saved I used that to restore functionality to the phone and thankfully it was ARHD which able to be S-OFFed using Sunshine.
Have you tried unblocking the bootloader again?
Click to expand...
Click to collapse
sunnyfly said:
So you had no OS and we're able to use sunshine? How tho? I am such at the bootloader with no OS and no recovery. My bootloader for some reason got locked and everything that I have come across doesn't seem to work. :crying:
---------- Post added at 05:42 AM ---------- Previous post was at 05:39 AM ----------
So you had no OS and we're able to use sunshine? How tho? I am such at the bootloader with no OS and no recovery. My bootloader for some reason got locked and everything that I have come across doesn't seem to work.
Click to expand...
Click to collapse
The missing OS version is caused by some versions of twrp 2.7.x.x recovery.
These versions have a bug that writes a bad instruction to the misc partition for bootloader messages, and inadvertently wipes your OS version number.
The only way to restore it is to flash firmware.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
I have an OS version but when I flashed the ARHD ROM and rebooted it when it was shutting down it told me that the phone needed to have SuperSU installed and it asked if Imwanted to install which I said yes to but it didnt install anything instead it just rebooted and stayed in the boot screen for the longest so I turned it off and restarted it but nothing would happen same stuck in boot screen. Went into recovery re flashed the ROM and rebooted the phone when I did that it sais that there was no OS imstalled and asked if I was sure that I wanted to reboot the phone. So now I am stuvk at yhe bootloader, Relocked for some reason with S-On and I have no clue on what to do.
---------- Post added at 08:48 AM ---------- Previous post was at 08:44 AM ----------
I have an OS version but when I flashed the ARHD ROM with TWRP and rebooted the phone, when I did that it said that there was no OS installed and asked if I was sure that I wanted to reboot the phone. So now I am stuck at the bootloader, Relocked for some reason with S-On and I have no clue on what to do.
sunnyfly said:
I have an OS version but when I flashed the ARHD ROM and rebooted it when it was shutting down it told me that the phone needed to have SuperSU installed and it asked if Imwanted to install which I said yes to but it didnt install anything instead it just rebooted and stayed in the boot screen for the longest so I turned it off and restarted it but nothing would happen same stuck in boot screen. Went into recovery re flashed the ROM and rebooted the phone when I did that it sais that there was no OS imstalled and asked if I was sure that I wanted to reboot the phone. So now I am stuvk at yhe bootloader, Relocked for some reason with S-On and I have no clue on what to do.
---------- Post added at 08:48 AM ---------- Previous post was at 08:44 AM ----------
I have an OS version but when I flashed the ARHD ROM with TWRP and rebooted the phone, when I did that it said that there was no OS installed and asked if I was sure that I wanted to reboot the phone. So now I am stuck at the bootloader, Relocked for some reason with S-On and I have no clue on what to do.
Click to expand...
Click to collapse
What version of twrp did you use?
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
2.6.3.0
---------- Post added at 04:18 PM ---------- Previous post was at 04:13 PM ----------
I do not remember if it was 2.5.0.0 or 2.6.3.0
sunnyfly said:
2.6.3.0
---------- Post added at 04:18 PM ---------- Previous post was at 04:13 PM ----------
I do not remember if it was 2.5.0.0 or 2.6.3.0
Click to expand...
Click to collapse
Try TWRP 2.6.3.3 it seems to work best for most stock roms.
sunnyfly said:
2.6.3.0
---------- Post added at 04:18 PM ---------- Previous post was at 04:13 PM ----------
I do not remember if it was 2.5.0.0 or 2.6.3.0
Click to expand...
Click to collapse
2.6.3.0 is not compatible with kitkat roms.
Use 2.6.3.3 as previously stated :good:
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
It worked fine when I first installed Viper ROM. Plus how would I be able to install it if I am relocked?
sunnyfly said:
It worked fine when I first installed Viper ROM. Plus how would I be able to install it if I am relocked?
Click to expand...
Click to collapse
You will have to unlock the bootloader first. If you are able to get to the bootloader you should be able to unlock your phone.
Ive tried several times and it doesn't let me. But me try again.
sunnyfly said:
Ive tried several times and it doesn't let me. But me try again.
Click to expand...
Click to collapse
If you are not able to unlock your bootloader, then you will need to find a RUU to reset your phone.
It worked. OMG it worked. Well it rebooted but stayed stuck in the boot up screen so I restarted it and went into the bootloader and now its unlocked. What do I do now?
---------- Post added at 06:16 PM ---------- Previous post was at 06:11 PM ----------
I got into recoveey and the TWRP version is 2.8.0.2
Btw I have the sprint version
I can't install anything, I dont know what to do. When it reboots it says that it has no OS installed and recovery can't open or mount any of the data, cache, or sdcard folders. What do I do?
sunnyfly said:
I can't install anything, I dont know what to do. When it reboots it says that it has no OS installed and recovery can't open or mount any of the data, cache, or sdcard folders. What do I do?
Click to expand...
Click to collapse
You can lock your bootloader and run the RUU in my previous post.
majmoz said:
You can lock your bootloader and run the RUU in my previous post.
Click to expand...
Click to collapse
I have already tried that before unlocking the bootloader. It doesn't go through. It gives me an error that the phone is not connected. To check that the phone is connected to the pc
sunnyfly said:
I have already tried that before unlocking the bootloader. It doesn't go through. It gives me an error that the phone is not connected. To check that the phone is connected to the pc
Click to expand...
Click to collapse
From the same site that had the RUU if you scroll down he also has the firmware from the RUU. You might try to flash it but your bootloader must be locked since you are S-ON.
I tried changing my HTC One M8_WHL PVT SHIP S-OFF into developer edition using the guide on http://htc-one.wonderhowto.com/how-...edition-for-super-fast-sense-updates-0156524/ . I successfully changed the MID and the CID without breaking a sweat. After, I used TWRP to restore the backup which the guide instructed me to download and restore. After restoring that backup, device could only boot HBOOT. Now I tried running the RUU.exe for Developer Edition and I get the error which asks that I run the correct RUU for the device. Now, the device doesn't boot pass HBOOT
What I can do ...
1. Boot into TWRP recovery
2. Give fastboot commands with HBOOT
3. Boot into RUU via fastboot
What I can't do ...
1. Boot the device
2. Revert the MID change to its original state cos I will need to run ADB Shell to do that, which cannot be done from HBOOT
3. No RUU.exe is responding to flashing the device
The specific help I need ...
1. Be able to Change MID using Fastboot so I can run a SPRINT RUU
fastboot getvar all results ...
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: Mod Edit
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: Mod Edit
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: BS_US002
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
PLEASE HELP!
You forgot the most important thing to do before doing something like this....read.
Your M8 must be a GSM model, like AT&T, T-Mobile, and most international variants.
Click to expand...
Click to collapse
Have you tried running the command to change the MID while booted to twrp?
As I have been using my GSM SIM in it, it didn't occur to me that it could be any different from a GSM Model. When I bought it, it came with S-Off and CID 11111111, though the bootloader was locked (like any other locked HBOOT from factory, not relocked).
BD619 said:
You forgot the most important thing to do before doing something like this....read.
Have you tried running the command to change the MID while booted to twrp?
Click to expand...
Click to collapse
Kindly show me direct me to a thread on how I can change the MID while booted to twrp. Thank you.
Economistaterry said:
My M8 is a GSM Model. I use to use my GSM SIM in it.
Click to expand...
Click to collapse
HTC One M8_WHL
Click to expand...
Click to collapse
is Sprint which is CDMA not GSM.
You said in your first post you could not revert your MID because you can't run adb shell... adb works in recovery...it's worth a shot.
Try changing your CID to SuperCID then try the Sprint RUU.
BD619 said:
is Sprint which is CDMA not GSM.
You said in your first post you could not revert your MID because you can't run adb shell... adb works in recovery...it's worth a shot.
Click to expand...
Click to collapse
ADB Shell won't start in TWRP sideload. But ADB devices comes out positively with the list of devices attached.
BD619 said:
Try changing your CID to SuperCID then try the Sprint RUU.
Click to expand...
Click to collapse
This was one of my first options. Didn't work.
Economistaterry said:
This was one of my first options. Didn't work.
Click to expand...
Click to collapse
Have you tried changing it back to Sprint CID?
BD619 said:
Have you tried changing it back to Sprint CID?
Click to expand...
Click to collapse
I haven't. The device came with Super CID. Let me try that and see. However, I tried flashing the firmware of Sprint via RUU with Super CID. The MID error showed up. I feel same will happen even if I change to Sprint CID, but I'll give it a shot.
BD619 said:
Have you tried changing it back to Sprint CID?
Click to expand...
Click to collapse
No luck.
adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling TWRP i just tested it on v2.8.6 2015-04-22 p1
---------- Post added at 05:06 AM ---------- Previous post was at 05:00 AM ----------
Economistaterry said:
Kindly show me direct me to a thread on how I can change the MID while booted to twrp. Thank you.
Click to expand...
Click to collapse
here is the link(post #2 has code for sprint), please be very careful it can easily turn your M8 into a piece of aluminum.
Vcek said:
adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling TWRP i just tested it on v2.8.6 2015-04-22 p1
---------- Post added at 05:06 AM ---------- Previous post was at 05:00 AM ----------
here is the link(post #2 has code for sprint), please be very careful it can easily turn your M8 into a piece of aluminum.
Click to expand...
Click to collapse
Bookmarked thanks.
vcek said:
adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling twrp i just tested it on v2.8.6 2015-04-22 p1
---------- post added at 05:06 am ---------- previous post was at 05:00 am ----------
here is the link(post #2 has code for sprint), please be very careful it can easily turn your m8 into a piece of aluminum.
Click to expand...
Click to collapse
yes! Yes! You are a life saver! Thank you so much!
It worked! It worked!
Phone is back alive! Wheew!
Hi professional developer.
I have a big problem on my htc one m7 phone
i have bricked it with invalid hboot version with S-ON
Now i can't return back to S-Off with any tool : firewater, revone, rumrunner, moonshine or even free chimera toolbox it still get error can't access or have no permission though i have super user.
the phone now has problem with auto restart caused by htcdialer has stopped problem.
and i want to go back to stock rom even with s-on (if no way to go back s-off) with OTA or without.
Please help me pleeeeeeeeeeeeeeease :crying::crying::crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hanannasr90 said:
Hi professional developer.
I have a big problem on my htc one m7 phone
i have bricked it with invalid hboot version with S-ON
Now i can't return back to S-Off with any tool : firewater, revone, rumrunner, moonshine or even free chimera toolbox it still get error can't access or have no permission though i have super user.
the phone now has problem with auto restart caused by htcdialer has stopped problem.
and i want to go back to stock rom even with s-on (if no way to go back s-off) with OTA or without.
Please help me pleeeeeeeeeeeeeeease :crying::crying::crying:
Click to expand...
Click to collapse
Help us and do
Fastboot getvarall and posted here without IMEI
Would also like to know what do you mean by "invalid hboot". Isn't 2.49 the right version for a dual sim?
KARIM9377 said:
Help us and do
Fastboot getvarall and posted here without IMEI
Click to expand...
Click to collapse
Here's Required info : Hope can help you to find solution to me
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: U3.15.3509.12
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.17.401.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4141mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks for reply.
hanannasr90 said:
Here's Required info : Hope can help you to find solution to me
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: U3.15.3509.12
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.17.401.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC3B9W9E0190
(bootloader) imei: 355868057892698
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4141mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks for reply.
Click to expand...
Click to collapse
Relock bootloader and flash this ruu
https://www.androidfilehost.com/?fid=24052804347778519
KARIM9377 said:
Relock bootloader and flash this ruu
https://www.androidfilehost.com/?fid=24052804347778519
Click to expand...
Click to collapse
Thanks For Reply. Hope it works.
hanannasr90 said:
Thanks For Reply. Hope it works.
Click to expand...
Click to collapse
@KARIM9377 , I See that its version is 7.17.402.5 and mine is 5.17.401.6 so, Are you sure that it will work ?
Thanks
http://download1350.mediafire.com/dqddw719g6wg/14idau489nab47d/PN07IMG_M7C_DUG_L50_SENSE60_MR_HTC_Europe_7.17.401.5_Radio_1237.29.35.0903_release_425785_signed_Hboot.zip
Could you please let me know how can this file be used ? Did it for install official Hboot ?
Please confirm me.. Thanks
hanannasr90 said:
@KARIM9377 , I See that its version is 7.17.402.5 and mine is 5.17.401.6 so, Are you sure that it will work ?
Thanks
Click to expand...
Click to collapse
Yes just relock bootloader first and flash this ruu
Sent from my XT1254 using Tapatalk
---------- Post added at 11:55 PM ---------- Previous post was at 11:50 PM ----------
Wiat
Sent from my XT1254 using Tapatalk
KARIM9377 said:
Yes just relock bootloader first and flash this ruu
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Hi,
I want to Thank you very much for your valuable help.
I have installed The RUU and get OTA Update.
I'll test it in next couple of hours to check if the auto restarts problem solved.
All words of thanks didn't give you what you really deserve.
:good::good::good::good::good::victory::victory::victory::victory::victory:
Biiiiiiiiiiiiig Thanksssssssssss
Don't flash 402 if you have 401
Sent from my XT1254 using Tapatalk
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
PN07IMG_M7C_DUG_L50_SENSE60_MR_HTC_Europe_7.17.401.5_Radio_1237.29.35.0903_release_425785_signed_Hboot.zip
Sent from my XT1254 using Tapatalk
---------- Post added 15-01-2017 at 12:00 AM ---------- Previous post was 14-01-2017 at 11:58 PM ----------
hanannasr90 said:
Hi,
I want to Thank you very much for your valuable help.
I have installed The RUU and get OTA Update.
I'll test it in next couple of hours to check if the auto restarts problem solved.
All words of thanks didn't give you what you really deserve.
:good::good::good::good::good::victory::victory::victory::victory::victory:
Biiiiiiiiiiiiig Thanksssssssssss
Click to expand...
Click to collapse
Is everything good with you now
Sent from my XT1254 using Tapatalk
---------- Post added at 12:04 AM ---------- Previous post was at 12:00 AM ----------
I am so happy when I help someone has problems with HTC
Sent from my XT1254 using Tapatalk
KARIM9377 said:
Don't flash 402 if you have 401
Sent from my XT1254 using Tapatalk
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
PN07IMG_M7C_DUG_L50_SENSE60_MR_HTC_Europe_7.17.401.5_Radio_1237.29.35.0903_release_425785_signed_Hboot.zip
Sent from my XT1254 using Tapatalk
---------- Post added 15-01-2017 at 12:00 AM ---------- Previous post was 14-01-2017 at 11:58 PM ----------
Is everything good with you now
Sent from my XT1254 using Tapatalk
---------- Post added at 12:04 AM ---------- Previous post was at 12:00 AM ----------
I am so happy when I help someone has problems with HTC
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Hi,
If you mean that i don't install 401 HBOOT file on 402 OS version.
It's OKAY I will not install it . I just want to ask you what's that file!!
:good: I'm really so happy and Thankful
hanannasr90 said:
Hi,
If you mean that i don't install 401 HBOOT file on 402 OS version.
It's OKAY I will not install it . I just want to ask you what's that file!!
:good: I'm really so happy and Thankful
Click to expand...
Click to collapse
If you get OTA that's mean all is good
On 402 or 401 that's mean everything is good don't worry
If you flash 402 on 401 the deferent is QSC if the QSC pass when flash ruu it's good and everything will
Sent from my XT1254 using Tapatalk
KARIM9377 said:
If you get OTA that's mean all is good
On 402 or 401 that's mean everything is good don't worry
If you flash 402 on 401 the deferent is QSC if the QSC pass when flash ruu it's good and everything will
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Hi,
After few hours from usage and being out of charge, This message has been appeared (Previous issue) and when tap Send or Don't send the Phone auto restarts again :crying: !!
https://s30.postimg.org/6r7kv0ku9/16010014_1230605987030795_812363595_o.jpg
Please help me to resolve this issue.
Thanks
How to recalibrate your HTC One M7 battery
hanannasr90 said:
Hi,
After few hours from usage and being out of charge, This message has been appeared (Previous issue) and when tap Send or Don't send the Phone auto restarts again :crying: !!
https://s30.postimg.org/6r7kv0ku9/16010014_1230605987030795_812363595_o.jpg
Please help me to resolve this issue.
Thanks
Click to expand...
Click to collapse
Try to recalibrate your battery by doing the following steps:
Go to Settings and disable Fast Boot
#Turn off the phone.
#Charge the phone using your HTC charger for at least ten minutes.
#While the M7 is charging, press and hold down the following buttons: Volume Up, Volume Down, and Power.
#Continue holding the three buttons for at least two minutes. The phone will repeatedly turn on and off every 15 seconds while you’re doing this.
#After 2 minutes, release the buttons when the phone is on.
#Let the M7 charge normally to 100% and give it more 30 mutes
and give it two full charger with use and you will see deterrent
#### IF THIS DIDN'T WORK THAN ITS BATTERY REPLACEMENT TIME ####
FOR THE ERROR message its not important you see this message when you recover your phone
---------- Post added at 09:49 AM ---------- Previous post was at 09:43 AM ----------
DO factory reset from recovery before recalibrate
---------- Post added at 09:57 AM ---------- Previous post was at 09:49 AM ----------
If you haven’t tried doing a factory reset before, here are the steps:
First, press and hold the Volume Down key.
Do the same thing for the Power key.
Release the buttons once the three Android images appear on the screen.
Go to Factory Reset option using the Volume Down button.
Press the Power key to confirm your selection.
Note: factory reset will delete all data stored in the phone’s internal memory (but not the SD card). Make sure you have a backup of all your photos, videos, contacts, messages, etc before doing so.
To be safe, kindly unmount your SD card from the phone as well.
KARIM9377 said:
Try to recalibrate your battery by doing the following steps:
Go to Settings and disable Fast Boot
#Turn off the phone.
#Charge the phone using your HTC charger for at least ten minutes.
#While the M7 is charging, press and hold down the following buttons: Volume Up, Volume Down, and Power.
#Continue holding the three buttons for at least two minutes. The phone will repeatedly turn on and off every 15 seconds while you’re doing this.
#After 2 minutes, release the buttons when the phone is on.
#Let the M7 charge normally to 100% and give it more 30 mutes
and give it two full charger with use and you will see deterrent
#### IF THIS DIDN'T WORK THAN ITS BATTERY REPLACEMENT TIME ####
FOR THE ERROR message its not important you see this message when you recover your phone
---------- Post added at 09:49 AM ---------- Previous post was at 09:43 AM ----------
DO factory reset from recovery before recalibrate
---------- Post added at 09:57 AM ---------- Previous post was at 09:49 AM ----------
If you haven’t tried doing a factory reset before, here are the steps:
First, press and hold the Volume Down key.
Do the same thing for the Power key.
Release the buttons once the three Android images appear on the screen.
Go to Factory Reset option using the Volume Down button.
Press the Power key to confirm your selection.
Note: factory reset will delete all data stored in the phone’s internal memory (but not the SD card). Make sure you have a backup of all your photos, videos, contacts, messages, etc before doing so.
To be safe, kindly unmount your SD card from the phone as well.
Click to expand...
Click to collapse
Hi
I have reseted it and became better than before but restart issue already exist but not much as before reset it to factory default.
Thanks for all your effort.
Really appreciated