Hello,
I use Malaysk ROM (V9.1) on my Erisin 3015 with original MCU MTCD_LM_V1.77_1. Everything works fine.
BUT
The VPN connection to my lokal network doesn't work.
My Erisin 3015 is connected with my mobilphone S3mini (CM 12) via WiFi. Without VPN everything work well.
When I start the VPN connection (I use the buildin VPN connector) to my local router (FritzBox) it shows "connected", but I have no access to the internet or to my lokal network. The App IPTools shows me no IP address and the Log of my local router shows no event.
When I use a other mobilephone (Android 4.4.2) with the same connection and the same login data (WiFi to mobilephone S3mini and VPN to my local router) it works and the local router shows me "VPN connection to XXX was successfully...". So I guess it's a problem of the Erisin 3015 and/or the Malaysk ROM.
Does anyone have a successful VPN connection with the Malaysk ROM or Stock-ROM?
Related
Hi,
I have an interesting problem. I am in Dubai, where the ISP (Etisalat) provides Internet via Fiber-optic cables to my residence. They have this modem which I connect my wi-fi router to.
After connecting to my wi-fi router the usual way, I have to dial-in via a Broadband PPPoE connection, where I provide the ISP username and password. I have to do this every time I connect to the Internet.
Unfortunately, this means I cannot connect my Nexus One to the Internet This is because I am not aware of any app/functionality that enables PPPoE dialing on Android.
I had installed Connectify for Windows 7 that enabled me to share my authenticated Internet connection with other devices (and hence my N1). However, after FR83, this seems to have stopped working as well, for some reason. It is extremely difficult to connect to the shared Wifi created by Connectify, and even after connecting, I cannot browse the Internet.
I have already tried setting a static IP address for the N1, but this did not resolve the issue.
Can anybody offer guidance, ideas? Any help would be much appreciated!
Cheers,
PI
Get a router, set the router to connect through PPPoE and every device that connects to the wireless router will work.
Thanks, but I wouldn't want to spend more money...
lorin.bute said:
Get a router, set the router to connect through PPPoE and every device that connects to the wireless router will work.
Click to expand...
Click to collapse
Thanks, but I wouldn't want to spend more money on another router. I have a Wi-fi router already, but I don't know if it has the ability to connect via PPPoE. It's a 3COM 3CRWDR200A-75.
Will try and research if I can enable PPPoE via this somehow.
Cheers,
PI
Protocol Set: Dynamic and static IP addressing, DHCP Server, NAT/PAT (with TCP and UDP), PPTP/PPPoE, CHAP, IPCP, SNTP.
http://www.3com.com/products/en_US/detail.jsp?tab=prodspec&sku=3CRWDR200A-75&pathtype=purchase
There you go.
Set your current router to connect through pppoe and you are ready.
Good luck.
droid does
https://market.android.com/details?id=com.cnddu.wifipppoe&feature=search_result
I believe ur wifi "router" is only a wifi access point...
just download wifi pppoe
elgarteo95 said:
I believe ur wifi "router" is only a wifi access point...
Click to expand...
Click to collapse
More accurately, it is a router that happens to have a wireless interface. Most home wireless routers usually have the functionality of a switch as well (that is, providing multiple connections to the same local network), but they usually include routing capability to move traffic from your local area network to the Internet.
Hi guys. I have not access to market because of my region. Can any body get me the WIFI PPPoE ?
wifi pppoe doesnt work for me
Hi,
I have just upgraded mi N1 to froyo with the official update.
I tried the tethering function and it works just fine except for the fact that i am not able to use the cisco VPN client from my laptop when connecting to the internet via tethering.
The VPN session works up to when it is already connected without any error but then it doesn't transfer any data.
Is the traffic filtered somehow? Did anyone find a workaround for this problem?
Thanks in advance
Gas
I was using CiscoVPN and now Juniper through N1's tethering, never a problem.
Check the connection - check that you have DNS servers and you can access public servers using ping, etc. From the laptop, I mean.
I finally got it to work.
The strange part is that it works when using WIFI tethering but fails when using USB tehtering.
Gas
Same here.
I plug in my phone and turn on tethering. I can surf the web. I logon to VPN and then it wont let me connect to anything on the VPN. I decided to try turning the phone in to a hotspot, this works, i get connected. I VPN in and poof! i can hit all the servers. ... anyone else run in to something like this.
USB Tether + VPN and I cant hit anything on VPN
Wifi Hotspot + VPN and everything works as it should
Tmobile G2 - Stock
Cisco VPN software
Thanks
I had the same problem using USB tethering.
I found a solution:
- change at the Cisco client software the transport to "IPSec over TCP"
This worked for me fine.
I had the same problem with Hotspot and Cicso VPN, and the change in transport protocol to "IPSec over TCP" fixed it. Thanks.
Hello at all !!!!
I have a samsung tab with gingerbread 2.3.3 rooted and with wpa replaced.
I would like to sharing my notebook internet connection with my tab using wifi ad hoc network.
These are my settings:
Notebook:
Static IP: 192.168.0.1
Subnet : 255.255.255.0
Tab:
Static IP: 192.168.0.3
Subnet: 255.255.255.0
Gateway: 192.168.0.1
DNS 1: 192.168.0.1
My internet connection on notebook is shared and my tablet connect at my ad hoc network correctly but if I try to ping with this command ping 192.168.0.3 dont work. Also internet dont work on my tab.
What's wrong??
I used tablet settings with another pc desktop. My pc desktop and notebook are fine connected. So i think that settings are correctly. Internet sharing work fine. When try with my tablet , notebook dont see connection tablet, but tablet is connected.
Someone tells me his experience??
i had d same experience. but i was able to solve mine. but sorry can't post the link here. also with wpa_supplicant thing but also with adb shell thing. got mine solved from youtube.
There is a apk application to configure or testing network ad hoc??
I tried many times but connection dont work!!
I lost my hopes!!!!!
Someone tell me where is problem??
If I set static ip on tablet and on my pc, tablet seems connected ( from tablet) but not connected from pc.
If I set automatically ip address my tablet remains on "obtaining ip address" without connect.
Solved
I have solved!!!!!
Problem was my notebook wifi card.
Now I use an usb wifi and all work fine!!!
I have to use a vpn for incoming services using sprints network. Im connect to my vpn on my phone and route the vpn through my hotspot so every computer gets the public address and all that is working. My hotspot config is gateway 192.168.2.1 and the ddwrt router that my clients connect to is 192.168.2.5. Problem is. When i connect to the vpn it changes the gw and i cannot ping or connect to any services on 192.168.2.5 from the phone. However i can ping 192.168.2.1. Can someone tell me how to add a route so that i can talk to 192.168.2.5 from the phone when the vpn is connected. Thankyou my phone is rooted.
Hello,
Since the last Update (global Rom) my mi9 can't connect to my WiFi, neither 2,4 GHz nor 5ghz. Has anyone else figured the same Problem or is it just me? It just says connecting and stops then.
I have the same issue but just with one router (Vodafone). Any other router connects perfect. Did factory reset on both, didn't help. Tried static ip, didn't work. I guess your router has the same problem as mine: it can't handle the changing Mac address of Android 10. Workaround for me now is to restart the phone and voila it connects.
As soon as I can get a new router I will change it.
Had the same issue. I had to put my phone ip and mac address in address reservation option in my router and now working as have to be