Has anybody gotten magisk to work on their oneplus 3t running OOS 4.0.1? I've tried and it seems to work, but I can't enable magisk hide. After I check the box then reboot, the box goes back to being unchecked. The magisk manager says I have the latest version and I am rooted properly
I have Magisk working on 4.0.1 and Magisk Hide works correctly for me. Are you using phh Superuser or SuperSU for root? Magisk Hide only works with phh Superuser.
illmatic416 said:
I have Magisk working on 4.0.1 and Magisk Hide works correctly for me. Are you using phh Superuser or SuperSU for root? Magisk Hide only works with phh Superuser.
Click to expand...
Click to collapse
I tried using phh superuser but for some reason it doesn't seem to work. I get a notification saying the su binaries need to be updated and when I click on it nothing happens
Related
I used SuperSU included in TWRP from http://forum.xda-developers.com/showpost.php?p=67791618&postcount=10 to root my device. In this thread, it is said that only this modified version of SuperSU is working.
Is it possible to flash the included SuperSU systemless and then flash suhide from http://forum.xda-developers.com/apps/supersu/suhide-t3450396?
Just in case someone else also wants to try this - I got SuperSU + suhide working.
What I did:
- Unrooted from SuperSU app
- Rebooted system (happened automatically)
- Rebooted into TWRP and systemless flashed SuperSU 2.78-SR1 from here: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
- Rebooted system
- Rebooted into TWRP and flashed suhide
-> SuperSU is working, Pokemon Go 0.39.1 is also working
Hi zendertrick,
thanks for the heads up!
It worked fine so far, but now I have a major issue with vibration: a few seconds after I unlock my SIM, my phone doesn‘t vibrate anymore.
Is this also happening to you?
Thanks and best regards
Tek
zendertrick said:
Just in case someone else also wants to try this - I got SuperSU + suhide working.
What I did:
- Unrooted from SuperSU app
- Rebooted system (happened automatically)
- Rebooted into TWRP and systemless flashed SuperSU 2.78-SR1 from here: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
- Rebooted system
- Rebooted into TWRP and flashed suhide
-> SuperSU is working, Pokemon Go 0.39.1 is also working
Click to expand...
Click to collapse
Do you have xposed installed?
Sent from my SM-G930F using Tapatalk
Tek5 said:
It worked fine so far, but now I have a major issue with vibration: a few seconds after I unlock my SIM, my phone doesn‘t vibrate anymore.
Is this also happening to you?
Click to expand...
Click to collapse
No, vibration works for me, but I don't have a SIM lock.
madhero said:
Do you have xposed installed?
Click to expand...
Click to collapse
No, i don't have xposed installed.
I have sound bug with SuHide, when i install it, the speaker don't working with Mokee Rom on Zuk Z2 Pro and i have somes popup who advertise me somes Apk Qualcomm crash after system start.
If i dont install it, Systemless SuperSu and Systemless Xposed works very well.
I Installed Magisk Manager and i already had supersu. Well now ive got magisksu installed. So i deleted the supersu. But the busy box app is still on my device. But busy box says not installed. Do i need busy box with magisksu? I'm confused
If you have apps that need busybox you can enable Magisk busybox in the Manager settings. Otherwise you can ignore it.
Didgeridoohan said:
If you have apps that need busybox you can enable Magisk busybox in the Manager settings. Otherwise you can ignore it.
Click to expand...
Click to collapse
Okay thanks. And do you know why the force doze app isnt putting my phone into deep sleep after switching to magisk?
BenClay13 said:
Okay thanks. And do you know why the force doze app isnt putting my phone into deep sleep after switching to magisk?
Click to expand...
Click to collapse
Don't know. Your description of your installation is a bit vague. If you already had systemless SuperSU installed when installing Magisk, Magisk will use SuperSU rather than MagiskSU. In that case you'll still need the SuperSU app for root management.
Didgeridoohan said:
Don't know. Your description of your installation is a bit vague. If you already had systemless SuperSU installed when installing Magisk, Magisk will use SuperSU rather than MagiskSU. In that case you'll still need the SuperSU app for root management.
Click to expand...
Click to collapse
I had SuperSU but when i installed magisk it changed to MagiskSU under the properly rooted tab. I don't know how it happened. I just let magisk do its thing and then when my phone rebooted my kernel was back to stock(previously had FK), and magiskSU was now under the properly rooted tab.
BenClay13 said:
I had SuperSU but when i installed magisk it changed to MagiskSU under the properly rooted tab. I don't know how it happened. I just let magisk do its thing and then when my phone rebooted my kernel was back to stock(previously had FK), and magiskSU was now under the properly rooted tab.
Click to expand...
Click to collapse
In that case your installation of SuperSU wasn't systemless. If you want FK back it's just to install it again. Hm... I have never tried installing FK over Magisk through the FK Manager & Updater. If you get issues, reflash your stock boot image, flash FK and then Magisk.
About your Force Doze issue: does the app ask for superuser access? To keep with the FK theme, I've tested Naptime with MagiskSU and it works well.
I've just clean flashed latest official from Oneplus (wiped everything and sideload from stock recovery) Using Magisk 14.3 with the bundled latest Magisk Manager 5.4.0, bluspark TWRP. Root and root apps work fine with SafetyNet pass.
It gets stuck at boot animation if I reboot after load a Magisk module. OP3T A3003.
Anyone managed to get working Magisk modules in OOS? And how? OOS Oreo is really snappy I like it
Thanks
I have the exact same setup as you, so I suspect it may be the module you're trying to use that is incompatible with OOS 5.0.
I am currently using "iOS 11.1 Emoji" and "HEVC+SM" Google Camera modules, working perfectly.
huilun02 said:
It gets stuck at boot animation if I reboot after load a Magisk module. OP3T A3003.
Anyone managed to get working Magisk modules in OOS? And how? OOS Oreo is really snappy I like it
Thanks
Click to expand...
Click to collapse
Which module isn't working? As said above, depending on what it does it may not be compatible.
I'm using iOS 11.1 emoji aswell, iYTBP, Extended Volume Steps and Display SELinux Status without any issue.
Android version: 11
Phone: Redmi K30 Pro Zoom Edition
Soft version: 20.9.17 dev miui.eu
I'm fighting with magisk, so first of all I installed latest Magist Manager and via Manager I download Magisk latest version (20400). Then I boot my phone into recovery mode (TWRP) and install zip with magisk. Here everything is good, magisk should be installed without problems. But when I open Magisk Manager I get error "Magisk is not installed". Also There is a problem with SafetyNet Check (ctsProfile: false).
Magisk v20.4 doesn't support A11... You need to use the Canary release or wait for the next beta/stable release.
And note that there has been issues with Magisk and A11 if you have TWRP installed. Booting TWRP without installing it has been working fine though.
Didgeridoohan said:
Magisk v20.4 doesn't support A11... You need to use the Canary release or wait for the next beta/stable release.
And note that there has been issues with Magisk and A11 if you have TWRP installed. Booting TWRP without installing it has been working fine though.
Click to expand...
Click to collapse
With the canary should work everything fine ? so just uninstall magisk manager install canary apk and fine ?
Didgeridoohan said:
Magisk v20.4 doesn't support A11... You need to use the Canary release or wait for the next beta/stable release.
And note that there has been issues with Magisk and A11 if you have TWRP installed. Booting TWRP without installing it has been working fine though.
Click to expand...
Click to collapse
So now I have installed canary version. Via magisk canary i download latest magisk version (20425) and install it via TWRP and now it looks like Magisk is installed but still safetyNet check failed and also I cannot hide Magisk Manager so = I cannot still use it.
SafetyNet: https://www.didgeridoohan.com/magisk/MagiskHide#hn_SafetyNet
And you need to be more detailed if you want help. What doesn't work about hiding the Manager? Also: https://www.didgeridoohan.com/magisk/Magisk#hn_Cant_hide_the_Magisk_Manager
Didgeridoohan said:
SafetyNet: https://www.didgeridoohan.com/magisk/MagiskHide#hn_SafetyNet
And you need to be more detailed if you want help. What doesn't work about hiding the Manager? Also: https://www.didgeridoohan.com/magisk/Magisk#hn_Cant_hide_the_Magisk_Manager
Click to expand...
Click to collapse
Hmm how can I be more specific. I will try. When I'm pushing button "Hide Magisk Manager" afret typing new app name after few seconds I get toast "canno't hide magisk manager" that's all.
KyluAce said:
Hmm how can I be more specific. I will try. When I'm pushing button "Hide Magisk Manager" afret typing new app name after few seconds I get toast "canno't hide magisk manager" that's all.
Click to expand...
Click to collapse
Did you check the second link i posted?
Didgeridoohan said:
Did you check the second link i posted?
Click to expand...
Click to collapse
Yea I checked. Suddenly starts worked with hide "Magisk Manager" but still I have problem with passing safetynet check
Didgeridoohan said:
Did you check the second link i posted?
Click to expand...
Click to collapse
OK I do this and i works now https://www.youtube.com/watch?v=wKYC0r-m0Mo
Hi,
I have tried the Magisk Canary but then I wanted to install the version 23.0. Now it says the root isn't successful. How can I completely install magisk?
Regards,
I can't access anymore my banking app