Database Develop

[Q] RUU / Stock Advice :(

Hey Guys,
I am currently looking to set my phone back to Stock/Out of box, to send in to retailer for repairs (Warranty). I would greatly appreciate it if anyone could help me.
I am about to follow this guide http://htc-one.wonderhowto.com/how-to/return-your-rooted-unlocked-htc-one-back-factory-settings-for-warranty-repairs-0149204/
All of my backup data, was on an external hard-drive which became corrupted, However as I have previously posted my Getvar details, before flashing any CFW... So I have managed to retrieve my original version and CID ect. (Thanks to XDA )
I was firstly going to Change my CID back to it's original state and then follow the guide further...
However I can not find the Correct RUU file for my version?
Phone Info (Current State):
*Bootloader Unlocked
*S-Off
*Rooted
*SuperCID (11111111) - Enabled
*Recovery In Use - (openrecovery-twrp-2.6.3.4-m7ul.img)
Current Getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA************
(bootloader) imei: 35**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3701mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Stock Getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA*************
(bootloader) imei: 35*************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I am also currently on EE network
Best Wishes
Danny

dannybbb said:
Hey Guys,
I am currently looking to set my phone back to Stock/Out of box, to send in to retailer for repairs (Warranty). I would greatly appreciate it if anyone could help me.
I am about to follow this guide http://htc-one.wonderhowto.com/how-to/return-your-rooted-unlocked-htc-one-back-factory-settings-for-warranty-repairs-0149204/
All of my backup data, was on an external hard-drive which became corrupted, However as I have previously posted my Getvar details, before flashing any CFW... So I have managed to retrieve my original version and CID ect. (Thanks to XDA )
I was firstly going to Change my CID back to it's original state and then follow the guide further...
However I can not find the Correct RUU file for my version?
Phone Info (Current State):
*Bootloader Unlocked
*S-Off
*Rooted
*SuperCID (11111111) - Enabled
*Recovery In Use - (openrecovery-twrp-2.6.3.4-m7ul.img)
Current Getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA************
(bootloader) imei: 35**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3701mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Stock Getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA*************
(bootloader) imei: 35*************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4073mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I am also currently on EE network
Best Wishes
Danny
Click to expand...
Click to collapse
follow nkk71's guide linked in my signature, not that guide you have linked.
basically, youll have to revert your cid back to htc__001 and then flash the 1.28.401 ruu. if you want to s-on, do it while still on hboot 1.44 or 1.54

OK firstly, Thank you very much for you reply...
I have read the thread, and still have a small amount of confusion/doubt as to what I need to do.
Here is what I am planning to do:
Step 1:
Open command prompt in fastboot directory
fastboot oem writecid HTC__001
fastboot reboot-bootloader
(Confirm CID has updated)
Step 2: Remove TAMPERED Banner
adb devices
adb shell
echo -ne '\x00' | dd of=/dev/block/mmcblk0p7 bs=1 seek=4265988
echo -ne '\x00\x00\x00\x00' | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
exit
Step 3:
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader";
once finished: continue with
adb reboot bootloader, and confirm no TAMPERED and LOCKED status
Step 4: ??????
Additional info: RUU EXE Reads - You may need to flash hboot 1.44 before the RUU will install. S-Off Required. Download - 1.29.401.12_hboot_1.44 http://www.htc1guru.com/dld/ruu_m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-exe/
But RUU ZIP - Does not mention 1.29.401.12_hboot_1.44 at all http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-zip/
I am restoring via RUU.zip: I need to be S-On for warranty purposes, So the confusion I have is do I
A: Flash RUU 1.29.401.12_hboot_1.44 - First in order to downgrade the HBOOT from 1.55 and gain S-ON?
B:Just flash RUU 1.28.401.7 and attempt S-On
C:Flash RUU 1.29.401.12_hboot_1.44 , Gain S-On, Then flash RUU 1.28.401.7
fastboot oem rebootRUU
fastboot flash zip ruu.zip (TBC)
fastboot flash zip ruu.zip (TBC)
fastboot reboot-bootloader
Step 5 Gain S-On
fastboot oem writesecureflag 3
Reboot 3 Times
No further steps required, Os should be bootable and returned to stock - Is this correct
Thanks

dannybbb said:
OK firstly, Thank you very much for you reply...
I have read the thread, and still have a small amount of confusion/doubt as to what I need to do.
Here is what I am planning to do:
Step 1:
Open command prompt in fastboot directory
fastboot oem writecid HTC__001
fastboot reboot-bootloader
(Confirm CID has updated)
this is good
Step 2: Remove TAMPERED Banner
adb devices
adb shell
echo -ne '\x00' | dd of=/dev/block/mmcblk0p7 bs=1 seek=4265988
echo -ne '\x00\x00\x00\x00' | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
exit
not needed because it will be done at step 3 using the guru bootloader reset tool
Step 3:
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader";
once finished: continue with
adb reboot bootloader, and confirm no TAMPERED and LOCKED status
Step 4: ??????
download the 1.28.4017 ruu.zip from here: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/ and save it in the same folder you have adb and fastboot on your computer. rename the file "ruu" ("ruu.zip")
Additional info: RUU EXE Reads - You may need to flash hboot 1.44 before the RUU will install. S-Off Required. Download - 1.29.401.12_hboot_1.44 http://www.htc1guru.com/dld/ruu_m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-exe/
not needed if using the 1.28.401.7 ruu.zip
But RUU ZIP - Does not mention 1.29.401.12_hboot_1.44 at all http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-zip/
I am restoring via RUU.zip: I need to be S-On for warranty purposes, So the confusion I have is do I
A: Flash RUU 1.29.401.12_hboot_1.44 - First in order to downgrade the HBOOT from 1.55 and gain S-ON?
B:Just flash RUU 1.28.401.7 and attempt S-On <----- change cid, lock and remove tampered from bootloader using the guru tool, flash ruu and finally s-on
C:Flash RUU 1.29.401.12_hboot_1.44 , Gain S-On, Then flash RUU 1.28.401.7
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot-bootloader
Step 5 Gain S-On
fastboot oem writesecureflag 3
Reboot 3 Times
No further steps required, Os should be bootable and returned to stock - Is this correct
correct
Thanks
Click to expand...
Click to collapse
read the quote above with comments in red. follow steps in guide with what commented above and you'll be fine

alray said:
read the quote above with comments in red. follow steps in guide with what commented above and you'll be fine
Click to expand...
Click to collapse
Thank you, I will give it a go now... and let you know

Rather than creating a new thread, I think I would like to hijack this thread for a while with a question regarding RUU.
@alray I have been unable to flash RUU.exe on my HTC One which seems to be giving the errors:
Error 170
Error 155
HTC_Fastboot.exe stopped working
I have in the past been able to flash the same RUU for the same phone without any issues. My phone is S-Off already and I am using a USB 2.0 port (also tried with the 3.0).
Tried in 2 different PC's (Win 8 and Win 7) Any recommendation?
Thanks

fareed_xtreme said:
Any recommendation?
Click to expand...
Click to collapse
yes
post the output of fastboot getvar all (except imei/sn)
what ruu are you using exactly? (complete file name please)
btw
error 170 = usb error, either because of a bad usb cable, bad usb port, driver issues
error 155 = image error, either because you are not using the right ruu for your phone (to determine with the getvar all), or because your hboot version is higher than the one in the ruu. in that case, you must downgrade hboot prior to running the ruu.exe. Using ruu.zip avoids that kind of issue because zip ruu doesnt check for bootloader version.

fareed_xtreme said:
Rather than creating a new thread, I think I would like to hijack this thread for a while with a question regarding RUU.
@alray I have been unable to flash RUU.exe on my HTC One which seems to be giving the errors:
Error 170
Error 155
HTC_Fastboot.exe stopped working
I have in the past been able to flash the same RUU for the same phone without any issues. My phone is S-Off already and I am using a USB 2.0 port (also tried with the 3.0).
Tried in 2 different PC's (Win 8 and Win 7) Any recommendation?
Thanks
Click to expand...
Click to collapse
Is it showing in adb / fastboot devices?

*edit*

alray said:
yes
post the output of fastboot getvar all (except imei/sn)
what ruu are you using exactly? (complete file name please)
btw
error 170 = usb error, either because of a bad usb cable, bad usb port, driver issues
error 155 = image error, either because you are not using the right ruu for your phone (to determine with the getvar all), or because your hboot version is higher than the one in the ruu. in that case, you must downgrade hboot prior to running the ruu.exe. Using ruu.zip avoids that kind of issue because zip ruu doesnt check for bootloader version.
Click to expand...
Click to collapse
I have tried the following RUU's:
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
RUU M7 UL JB 50 HTC Europe 1.20.401.1 Radio 4A.13.3227.06 10.27.1127.01 Release 308001 Signed 2 4
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: [COLOR="Silver"]REMOVED[/COLOR]
(bootloader) imei: [COLOR="Silver"]REMOVED[/COLOR]
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
Furthermore, in regards to the Error 170 of the USB, it comes after the HTC_Fastboot.exe crashes. I have already tried 3 different USB Cables (Brand New Original cables were used 1. Samsung, 2. Sony, 3. HTC)
dannybbb said:
Is it showing in adb / fastboot devices?
Click to expand...
Click to collapse
Yes, it shows my device Serial Number and the device. No issues at all.

fareed_xtreme said:
I have tried the following RUU's:
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
RUU M7 UL JB 50 HTC Europe 1.20.401.1 Radio 4A.13.3227.06 10.27.1127.01 Release 308001 Signed 2 4
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: [COLOR="Silver"]REMOVED[/COLOR]
(bootloader) imei: [COLOR="Silver"]REMOVED[/COLOR]
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
Furthermore, in regards to the Error 170 of the USB, it comes after the HTC_Fastboot.exe crashes. I have already tried 3 different USB Cables (Brand New Original cables were used 1. Samsung, 2. Sony, 3. HTC)
Yes, it shows my device Serial Number and the device. No issues at all.
Click to expand...
Click to collapse
1.20.401.1 RUU is a pre-release ruu. Don't try to flash this one, there is no ota update for that version and you'll be stock on 1.20.401.1 forever.
4.19.401.9 ruu.exe is a lower version than your phone so it will require to downgrade the hboot 1st.
Im not sure about the HTC_fastboot.exe error
Since you are s-off, what i recommend you is to use the 1.28.401.7 ruu.zip.
http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
save the file in your adb/fastboot folder and rename it "ruu" ("ruu.zip"). reboot phone in bootloader mode and open a command prompt from your adb/fastboot folder
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
then download and install each ota from settings --> about ---> software updates

alray said:
1.20.401.1 RUU is a pre-release ruu. Don't try to flash this one, there is no ota update for that version and you'll be stock on 1.20.401.1 forever.
4.19.401.9 ruu.exe is a lower version than your phone so it will require to downgrade the hboot 1st.
Im not sure about the HTC_fastboot.exe error
Since you are s-off, what i recommend you is to use the 1.28.401.7 ruu.zip.
http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
save the file in your adb/fastboot folder and rename it "ruu" ("ruu.zip"). reboot phone in bootloader mode and open a command prompt from your adb/fastboot folder
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
then download and install each ota from settings --> about ---> software updates
Click to expand...
Click to collapse
Thanks. I am sure the Zip has to work as firmware etc was able to flash.. I will confirm later when I try it.

fareed_xtreme said:
Thanks. I am sure the Zip has to work as firmware etc was able to flash.. I will confirm later when I try it.
Click to expand...
Click to collapse
don't forget this ruu will flash everything on the phone including the firmware so hboot will be downgraded to 1.44. Make sure you are not using a windows 8.1 computer because fastboot doesnt work with 8.1 and 1.44 so the ruu will not flash completely if you are using windows 8.1

damn man ı wanna be free

Cant downgrade from gpe / 5.01

Hi, Hope this post is in the right place, apologies if not.
I recently got a HTC One (M7) which was already unlocked, S-OFF and rooted and had 4.4 on it but i wanted to upgrade that OS so installed GPE and then it updated a few times to 5.01 which was all good but now i want to go back to 4.4 and this is the problem i'm having.
I'm in the UK using a O2 UK RUU file which i know does work but now when i go to use it i get as far as 'Checking Header' (5%) and thats it ..it wont go any further? I have tried in compatibility mode but that just returns errors.. I am using Fastboot & ADB tools and tried pushing the firmware but i'm really quite a novice when it comes t stuff like this ..
I tried fastboot getvar and all i get it a list of commands now which i dont understand
I do know my CID is 111111
Here's the Bootloader Info:
*** UNLOCKED***
M7 UL PVT SHIP S-OFF RH
CID 11111111
HBOOT 1.54.0000
RADIO 4T.30.3218.21
OPEN DSP v34.120.274.0429
OS 5.11. 1700 .3
All i want to do it flash the phone back to original Stock with OS 4.4 ..
also, when i try to go into recovery it wont let me, i get the green android laying on his back with a red exclamation on him and pressing up with power dont take me into recovery.
Any idea's please?
I would like to thank xda and it's members for all the help previously.. thanks guys

Craig_CFC said:
Hi, Hope this post is in the right place, apologies if not.
I recently got a HTC One (M7) which was already unlocked, S-OFF and rooted and had 4.4 on it but i wanted to upgrade that OS so installed GPE and then it updated a few times to 5.01 which was all good but now i want to go back to 4.4 and this is the problem i'm having.
I'm in the UK using a O2 UK RUU file which i know does work but now when i go to use it i get as far as 'Checking Header' (5%) and thats it ..it wont go any further? I have tried in compatibility mode but that just returns errors.. I am using Fastboot & ADB tools and tried pushing the firmware but i'm really quite a novice when it comes t stuff like this ..
I tried fastboot getvar and all i get it a list of commands now which i dont understand
I do know my CID is 111111
Here's the Bootloader Info:
*** UNLOCKED***
M7 UL PVT SHIP S-OFF RH
CID 11111111
HBOOT 1.54.0000
RADIO 4T.30.3218.21
OPEN DSP v34.120.274.0429
OS 5.11. 1700 .3
All i want to do it flash the phone back to original Stock with OS 4.4 ..
also, when i try to go into recovery it wont let me, i get the green android laying on his back with a red exclamation on him and pressing up with power dont take me into recovery.
Any idea's please?
I would like to thank xda and it's members for all the help previously.. thanks guys
Click to expand...
Click to collapse
Flash the firmware that matches your RUU first
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
then flash the RUU ... RUU gets stuck on the Hboot update step, flashing firmware first eliminates this problem

clsA said:
Flash the firmware that matches your RUU first
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
then flash the RUU ... RUU gets stuck on the Hboot update step, flashing firmware first eliminates this problem
Click to expand...
Click to collapse
Hi and thank you for your help.. i tried looking for the correct firmware.zip but after trying to flash it i get errors and 'fails' i'm not exactly sure which firmware i should be using - i did go to HTC site and selected what i thought were O2 UK FW files (1 was MR 3, 1 MR2 and 2 x zip files) so i assumed the .zip files were the FW files but its with these i got the errors. When i flashed them it did read them but aftr a few seconds returned a fail.
The RUU i am trying to put back on is RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2 which i know works on my device as i used it before i installed the GPE.
Any ideas please? I'm sorry i cant provide any more information.
Getvar Info:
C:\Users\Craig\Desktop\platform-tools>fastboot g
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: o2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4097mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.152s
C:\Users\Craig\Desktop\platform-tools>
Thanks again!

Craig_CFC said:
Hi and thank you for your help.. i tried looking for the correct firmware.zip but after trying to flash it i get errors and 'fails' i'm not exactly sure which firmware i should be using - i did go to HTC site and selected what i thought were O2 UK FW files (1 was MR 3, 1 MR2 and 2 x zip files) so i assumed the .zip files were the FW files but its with these i got the errors. When i flashed them it did read them but aftr a few seconds returned a fail.
The RUU i am trying to put back on is RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2 which i know works on my device as i used it before i installed the GPE.
Any ideas please? I'm sorry i cant provide any more information.
Getvar Info:
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: o2___001
(bootloader) security: off
all: Done!
finished. total time: 0.152s
C:\Users\Craig\Desktop\platform-tools>
Thanks again!
Click to expand...
Click to collapse
Well you phone is having a bit of an identity crises
you have hboot 1.54 ( assume it's the Dark bootloader for GPE)
your Firmware version is 6.x.401.x which is for the International version
and your CID is O2
I'm going to recommend you convert to International by changing you CID
fastboot oem writecid HTC__001
then flash this firmware
https://www.androidfilehost.com/?fid=23329332407574077
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
followed by this RUU
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
or
RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe - 1.50 GB

Maybe a little late but you could also try this:
http://forum.xda-developers.com/showthread.php?t=2358781
Go to post #2 and follow those instructions. Then flash whatever RUU you want.
I converted to GPE one time, didn't like it and also had trouble getting back to KK.

ANGRY_robert said:
Maybe a little late but you could also try this:
http://forum.xda-developers.com/showthread.php?t=2358781
Go to post #2 and follow those instructions. Then flash whatever RUU you want.
I converted to GPE one time, didn't like it and also had trouble getting back to KK.
Click to expand...
Click to collapse
Thanks again for the help.. much appreciated - im using TWRP v2.7 and wiped the whole phone by accident - i'm trying to push (adb sideload fw_4.19.401.9_custom.zip) but keeps coming back as no device - i have a yellow exclamation in device manager under 'other devices' 'one' and cant seem to find a windows 7 driver for this? once i can push or sideload the firmware i can flash it correct?
Thanks again

So to refresh my memory, you were on stock GPE and want to go back to stock sense correct? Now you have wiped the phone using twrp and twrp is all that is left?
Sent from my HTC One using XDA Free mobile app

ANGRY_robert said:
So to refresh my memory, you were on stock GPE and want to go back to stock sense correct? Now you have wiped the phone using twrp and twrp is all that is left?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Yes thats correct - i'm new to all this flashing stuff but have been reading lots of various posts on xda ...
This is whats returned from fastboot flash:
C:\Users\Craig\Desktop\platform-tools>fastboot flash zip fw_4.19.401.9_custom.zi
p
target reported max download size of 1526722560 bytes
sending 'zip' (27605 KB)...
OKAY [ 2.357s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 2.408s
C:\Users\Craig\Desktop\platform-tools>
and...
C:\Users\Craig\Desktop\platform-tools>adb push zip fw_4.19.401.9_custom.zip
adb server is out of date. killing...
* daemon started successfully *
error: device not found
i really dont know what to do now - i have all the correct files in the platform tools folder where i run the fastboot & adb commands (firmware & ruu) and have changed the CID to HTC___001
When i'm in recovery mode (TWRP) i get the yellow exclamation (screenshot hopefully attached)

First you need to get the driver working. Click on "one" and see if you can select from a list of devices on the pc. Now if the last working firmware on the phone was gpe then you need to push/sideload a gpe based Rom. This is because the partition structure is different than sense. You need to get a working Rom onto the phone first.
Sent from my HTC One using XDA Free mobile app

Craig_CFC said:
Yes thats correct - i'm new to all this flashing stuff but have been reading lots of various posts on xda ...
This is whats returned from fastboot flash:
C:\Users\Craig\Desktop\platform-tools>fastboot flash zip fw_4.19.401.9_custom.zi
p
target reported max download size of 1526722560 bytes
sending 'zip' (27605 KB)...
OKAY [ 2.357s]
writing 'zip'...
FAILED (remote: not allowed) You get this when the bootloader is locked did you relock the bootloader ?
finished. total time: 2.408s
C:\Users\Craig\Desktop\platform-tools>
and...
C:\Users\Craig\Desktop\platform-tools>adb push zip fw_4.19.401.9_custom.zip This is useless the firmware has to be flashed in fastboot RUU mode
adb server is out of date. killing...
* daemon started successfully *
error: device not found
i really dont know what to do now - i have all the correct files in the platform tools folder where i run the fastboot & adb commands (firmware & ruu) and have changed the CID to HTC___001
When i'm in recovery mode (TWRP) i get the yellow exclamation (screenshot hopefully attached)
Click to expand...
Click to collapse
Read my instructions again in post 4 and follow them
Your drivers are easy to fix see post 2 faq 2 here >> http://forum.xda-developers.com/showthread.php?t=2541082

clsA said:
Read my instructions again in post 4 and follow them
Your drivers are easy to fix see post 2 faq 2 here >> http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
Thank you clsA, i'm doing this now - flashed firmware success.. just adding the RUU now - will let you know how it goes

Craig_CFC said:
Thank you clsA, i'm doing this now - flashed firmware success.. just adding the RUU now - will let you know how it goes
Click to expand...
Click to collapse
All fixed thank you so much - back to good old KitKat thanks for all your help !! very very much appreciated

Craig_CFC said:
All fixed thank you so much - back to good old KitKat thanks for all your help !! very very much appreciated
Click to expand...
Click to collapse
your welcome // Please use the Thanks button below my name

clsA said:
your welcome // Please use the Thanks button below my name
Click to expand...
Click to collapse
Getvar Info:
C:\Users\Craig\Desktop\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3860mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Thanks again, ive clicked the like button

Craig_CFC said:
Getvar Info:
C:\Users\Craig\Desktop\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3860mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Thanks again, ive clicked the like button
Click to expand...
Click to collapse
Looks good .. you should get some OTA updates almost immediately

clsA said:
Looks good .. you should get some OTA updates almost immediately
Click to expand...
Click to collapse
Had 2 OTA's immediately - phone is running sweet again :good: :good:

[Q] Returning to stock - H3G__001

Hi All,
For months I have been trying to return my HTC One to stock ROM without success. When installing cyanogenmod I wasn't successful in creating a backup and didn't realise the implications of this until I tried to return to stock.
I have tried a few things - finding a back up for a H3G HTC one, changing the CID to 1111111 ((bootloader) [JAVACARD_ERR] SD/USBDISK Init error), installing from a RUU.exe and nothing has worked.
ADB and Fastboot are correctly set up on my laptop and communicating with my phone.
My GetVar all returns.
C:\Users\User\cminstaller\resources\tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.14.771.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3906mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.090s
Any help would be greatly appreciated.
Thanks in advance.

piney88 said:
Hi All,
For months I have been trying to return my HTC One to stock ROM without success. When installing cyanogenmod I wasn't successful in creating a backup and didn't realise the implications of this until I tried to return to stock.
I have tried a few things - finding a back up for a H3G HTC one, changing the CID to 1111111 ((bootloader) [JAVACARD_ERR] SD/USBDISK Init error), installing from a RUU.exe and nothing has worked.
ADB and Fastboot are correctly set up on my laptop and communicating with my phone.
My GetVar all returns.
C:\Users\User\cminstaller\resources\tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.14.771.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3906mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.090s
Any help would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
you cant change the CID without s-off
heres your latest stock Lollipop RUU.zip: https://www.androidfilehost.com/?fid=95916177934542817
it will wipe your entire phone, so backup anything you want to keep before flashing it.
As you are s-on you will need to relock your bootloader before flashing, but backup first as once the bootloader is locked or relocked, your custom rom wont boot.
rom taken from here and instructions on how to flash it are at the top of the page: http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944

Seanie280672 said:
you cant change the CID without s-off
heres your latest stock Lollipop RUU.zip: https://www.androidfilehost.com/?fid=95916177934542817
it will wipe your entire phone, so backup anything you want to keep before flashing it.
As you are s-on you will need to relock your bootloader before flashing, but backup first as once the bootloader is locked or relocked, your custom rom wont boot.
rom taken from here and instructions on how to flash it are at the top of the page: http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Click to expand...
Click to collapse
Thanks for the very quick reply. I downloaded the file.
Apologies for needing the extra help but I am unsure what to do with zip file - quote from the instructions "As many in this thread, ask about zip corruption, zip are not corrupted they are encrypted and can't open normally , they need decryption check md5 and dont try to unzip them"
Can you help on how I decrypt the file?

piney88 said:
Thanks for the very quick reply. I downloaded the file.
Apologies for needing the extra help but I am unsure what to do with zip file - quote from the instructions "As many in this thread, ask about zip corruption, zip are not corrupted they are encrypted and can't open normally , they need decryption check md5 and dont try to unzip them"
Can you help on how I decrypt the file?
Click to expand...
Click to collapse
why do you want to decrypt it, just follow the instructions and flash it as it it, rename that zip file to RRU.zip, put it in the same folder as your adb and fastboot files on your computer, and flash it.
Go from here: How To Flash
1. Rename file to RUU.zip
2. Place it in adb folder
3. Reboot phone to fastboot mode
4. S On need to relock bootloader (fastboot oem lock) , S Off lock not needed
5. Also use the htc_fastboot.exe not the normal fastboot.exe
get the htc_fastboot.exe here : https://www.androidfilehost.com/?fid=95916177934539737
Rename htc_fastboot to fastboot or if you don't rename it, then the command will be "htc_fastboot flash zip RUU.zip"
Run the following commands from your adb folder:
6. htc_fastboot oem rebootRUU
7.htc_fastboot flash zip RUU.zip
8.htc_fastboot reboot-bootloader

Seanie280672 said:
why do you want to decrypt it, just follow the instructions and flash it as it it, rename that zip file to RRU.zip, put it in the same folder as your adb and fastboot files on your computer, and flash it.
Go from here: How To Flash
1. Rename file to RUU.zip
2. Place it in adb folder
3. Reboot phone to fastboot mode
4. S On need to relock bootloader (fastboot oem lock) , S Off lock not needed
5. Also use the htc_fastboot.exe not the normal fastboot.exe
get the htc_fastboot.exe here :
Rename htc_fastboot to fastboot or if you don't rename it, then the command will be "htc_fastboot flash zip RUU.zip"
Run the following commands from your adb folder:
6. htc_fastboot oem rebootRUU
7.htc_fastboot flash zip RUU.zip
8.htc_fastboot reboot-bootloader
Click to expand...
Click to collapse
Seanie,
When I tried the flash it didn't work, I got an error message, I then read the text at the top of the page and misunderstood the guidance for instructions. Hence the decrypting question.
I just retried and it seems to have worked.
I do sincerely appreciate your help. Since November off and on I have been trying to make this happen - I couldn't have done it without you.
Thanks,
Piney

piney88 said:
Seanie,
When I tried the flash it didn't work, I got an error message, I then read the text at the top of the page and misunderstood the guidance for instructions. Hence the decrypting question.
I just retried and it seems to have worked.
I do sincerely appreciate your help. Since November off and on I have been trying to make this happen - I couldn't have done it without you.
Thanks,
Piney
Click to expand...
Click to collapse
For later reference http://forum.xda-developers.com/showthread.php?t=3028559 soon to be updated with latest stock files
Sent from my SM-T230 using Tapatalk

Help returning to 4.4.2 stock from 4.2.2. Nothing works!

Hi guys,
For 5 weeks I've been trying to upgrade my phone to 5.0.2 and nothing works. All I've managed to do is go from 4.4.2 down to 4.2.2 and now I'm stuck here. I've tried RUUs, I've tried fastboot zips, everything fails.
Right now I've got 4.2.2 TWRP, and s-off and this from getvar:
bootloader: 1.54.0000
baseband: 4a.17.3250.14
main 2.24.206.7
cidnum: 11111111
I just want to go back to stock to get OTAs.
Can someone please help me? I've watched so many YouTube videos and read so many threads but nothing has worked. I just keep digging a deeper hole.

download the stock firmware for your phone and flash it with odin

anfalanl said:
download the stock firmware for your phone and flash it with odin
Click to expand...
Click to collapse
Odin? Isn't that for Samsung phones?

SJWackness said:
Hi guys,
For 5 weeks I've been trying to upgrade my phone to 5.0.2 and nothing works. All I've managed to do is go from 4.4.2 down to 4.2.2 and now I'm stuck here. I've tried RUUs, I've tried fastboot zips, everything fails.
Right now I've got 4.2.2 TWRP, and s-off and this from getvar:
bootloader: 1.54.0000
baseband: 4a.17.3250.14
main 2.24.206.7
cidnum: 11111111
I just want to go back to stock to get OTAs.
Can someone please help me? I've watched so many YouTube videos and read so many threads but nothing has worked. I just keep digging a deeper hole.
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (remove imei and serialno)
"everything fails": can you be more precise please? Sometime it will fail for a simple reason, but without knowing the exact error its hard to tell you why it failed...
---------- Post added at 06:15 PM ---------- Previous post was at 06:12 PM ----------
anfalanl said:
download the stock firmware for your phone and flash it with odin
Click to expand...
Click to collapse
Hummm, no
donkeykong1 said:
Odin? Isn't that for Samsung phones?
Click to expand...
Click to collapse
^^

This is output of getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3849mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'f tried using different RUUs (206s and 401s) to get to 4.4.2 but it always fails. The furthest I got was a RUU getting stuck at "Checking Headers ....5%". It sat there for 30 minutes a few different times.
I've tried installing an OTA zip for 5.0.2 (when I was on 4.4.2) through TWRP but that didn't work either.
So I got S-Off and tried all of these again. Still not working.
Ideally what I want is a clean Sense 6 install of 5.0.2 with the latest firmware.
Any help would be very much appreciated. Thanks in advance.

I'm also getting this error from a few RUUs:
An error (-5001 : 0x80070002) has occurred while running the setup.
I've rebooted and run the RUU again and it says the same.

SJWackness said:
This is output of getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3849mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'f tried using different RUUs (206s and 401s) to get to 4.4.2 but it always fails. The furthest I got was a RUU getting stuck at "Checking Headers ....5%". It sat there for 30 minutes a few different times.
I've tried installing an OTA zip for 5.0.2 (when I was on 4.4.2) through TWRP but that didn't work either.
So I got S-Off and tried all of these again. Still not working.
Ideally what I want is a clean Sense 6 install of 5.0.2 with the latest firmware.
Any help would be very much appreciated. Thanks in advance.
Click to expand...
Click to collapse
SJWackness said:
I'm also getting this error from a few RUUs:
An error (-5001 : 0x80070002) has occurred while running the setup.
I've rebooted and run the RUU again and it says the same.
Click to expand...
Click to collapse
update your firmware to 7.19.401.2 then flash the 7.19.401.22 ruu. You must use htc_fastboot.exe to flash the ruu <--- important. Save htc_fastboot.exe, the 7.19.401.2 firmware and the 7.19.401.22 ruu in the same folder you have adb.exe and fastboot.exe on your computer.
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip
htc_fastboot reboot
First boot can take longer than usual (stuck at HTC splash screen) just wait it will boot eventually.

alray said:
update your firmware to 7.19.401.2 then flash the 7.19.401.22 ruu. You must use htc_fastboot.exe to flash the ruu <--- important. Save htc_fastboot.exe, the 7.19.401.2 firmware and the 7.19.401.22 ruu in the same folder you have adb.exe and fastboot.exe on your computer.
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip
htc_fastboot reboot
First boot can take longer than usual (stuck at HTC splash screen) just wait it will boot eventually.
Click to expand...
Click to collapse
THANKS A MILLION! It looks like it's updated! Cheers!!

[HELP] Returning HTC One (M7) to Stock ROM

Hey guys, What's up?
First of all, I must mention what happened, I always had an iPhone, and I bought a HTC One (M7) like 2 years ago, and I never thought about rooting it..
One year ago, my friend suggested that he can upgrade it to Lollipop, and he seemed so confident lol, and I think he messed it up, I do have Lollipop on it, but it's SO BUGGY!, The phone gets so HOT easily! keeps crashing! and many many other problems..
So I decided to have the Stock ROM back, and I started reading how, but honestly, it's so difficult since I don't know what he has done to the phone..
The only thing I remember he did: He was coming to this forum and mentioned that this is the best forums for Android devs..
So.. Can anyone please help me get my phone back to Stock ROM?
Tell me what to do first? What I need to have?
And most important, help me find the right files for my phone?
Thanks alot,
Have a nice day

Stock like in GPE or Sense?
IF you have international M7 not verizon, sprint etc.
The most simple method would be just flashing nearly stock tweaked rom through recovery i.e. this one:
Sense: http://forum.xda-developers.com/showthread.php?t=2183023
GPE: http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927
Full on back to stock would require using fastboot and RUU images, but you wouldn't gain anything from that.

MahmoudM10 said:
Hey guys, What's up?
First of all, I must mention what happened, I always had an iPhone, and I bought a HTC One (M7) like 2 years ago, and I never thought about rooting it..
One year ago, my friend suggested that he can upgrade it to Lollipop, and he seemed so confident lol, and I think he messed it up, I do have Lollipop on it, but it's SO BUGGY!, The phone gets so HOT easily! keeps crashing! and many many other problems..
So I decided to have the Stock ROM back, and I started reading how, but honestly, it's so difficult since I don't know what he has done to the phone..
The only thing I remember he did: He was coming to this forum and mentioned that this is the best forums for Android devs..
So.. Can anyone please help me get my phone back to Stock ROM?
Tell me what to do first? What I need to have?
And most important, help me find the right files for my phone?
Thanks alot,
Have a nice day
Click to expand...
Click to collapse
We will first need to know the exact info about your phone. You'll need to have adb and fastboot installed on your computer, if you don't have it yet, I would suggest you to download the simplified version (Minimal adb and fastboot). You'll also need to have HTC drivers installed on your computer. Once both are installed, reboot your phone in bootloader mode (hold power and volume down), make sure your phone is in "fastboot usb" (showing a red "fastboot usb" caption, if not select "fastboot" from the bootloader menu), then start a "minimal adb and fastboot" command prompt (start menu --> program --> Minimal adb and fastboot ---> Minimal adb and fastboot.exe). Type "fastboot getvar all" and hit enter. Copy/paste the output here (remove your IMEI, MEID and SerialNo before posting).
Should look like this:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-baseband: 4A.13.3231.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.707.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FAxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxxx
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4011mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT

FeelThePoveR said:
Stock like in GPE or Sense?
IF you have international M7 not verizon, sprint etc.
The most simple method would be just flashing nearly stock tweaked rom through recovery i.e. this one:
Sense: http://forum.xda-developers.com/showthread.php?t=2183023
GPE: http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927
Full on back to stock would require using fastboot and RUU images, but you wouldn't gain anything from that.
Click to expand...
Click to collapse
Hey FeelThePoveR,
Well, I don't really know what are verizon or sprint... and I don't know how to know..
but I live in Israel, and bought it from a private store, so I guess I have the international M7.. (makes sense? :/ )
Honestly, I want it back to stock so I can do whatever I want with my phone knowing what I'm doing..
I have some experience with adb and fastboot already.. I have ubuntu as well, it's not gonna be hard for me to follow instructions.. my WHOLE problem is.. that I don't know the condition of my phone.. what's wrong with it..
for example.. all the time I thought I have root, I tried to follow instructions few days ago to install something..
and I checked my root via Root Checker app, and it says that I don't have root installed proberly..
So yeah.. I want my phone back to stock.. :/
And yeah it's Sense not GPE..
Any suggestions?
(I'm gonna post in a reply the "getvar" info in few hours..)
Thanks alot for giving me some of your time
Have a nice day..

alray said:
We will first need to know the exact info about your phone. You'll need to have adb and fastboot installed on your computer, if you don't have it yet, I would suggest you to download the simplified version (Minimal adb and fastboot). You'll also need to have HTC drivers installed on your computer. Once both are installed, reboot your phone in bootloader mode (hold power and volume down), make sure your phone is in "fastboot usb" (showing a red "fastboot usb" caption, if not select "fastboot" from the bootloader menu), then start a "minimal adb and fastboot" command prompt (start menu --> program --> Minimal adb and fastboot ---> Minimal adb and fastboot.exe). Type "fastboot getvar all" and hit enter. Copy/paste the output here (remove your IMEI, MEID and SerialNo before posting).
Should look like this:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-baseband: 4A.13.3231.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.707.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FAxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxxx
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4011mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Click to expand...
Click to collapse
Hey alray,
I've been trying to get fastboot to work on my Windows for all day now..
and I tried following your instructions and files you mentioned above..
But I still get "< waiting for any device >", it doesn't recognize my phone..
tried downloading Android-SDK and installed google usb drivers as well..
It didn't work..
That's why I didn't post the getvar info yet :/
So I'm thinking about trying to do that on my Ubuntu..
but It's gonna take few hours until I'm on my laptop..
then I'll post the getvar info
For now, I don't know if that helps,
But I do know that my phone is TAMPERED + UNLOCKED + S-OFF
Thanks for your time..

Windows can be weird that way. You just have to manually install the driver.
I think I used that driver pack http://d-h.st/23V .
Unpack it, connect your phone in fastboot mode, go to device manager in the control panel and search for your device, than right click on it and select update drivers, browse my computer and select the folder with drivers.
Voila it should be working now.

Hey..
Here's my getvar info:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__K18
(bootloader) battery-status: good
(bootloader) battery-voltage: 3874mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
NOTE: I didn't hide the meid field.. it's all zeros (is that okay?)

MahmoudM10 said:
Hey..
Here's my getvar info:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__K18
(bootloader) battery-status: good
(bootloader) battery-voltage: 3874mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Since your phone is S-OFF you can simply flash the international version on it but before flashing the international RUU, you'll have to change your CID and then update your firmware.
Download these 2 files and save it in your adb/fastboot folder on your computer:
RUU: https://www.androidfilehost.com/?fid=24391638059058554
htc_fastboot.exe (this version is needed to flash the RUU, not the regular fastboot): https://www.androidfilehost.com/?fid=24341993505161791
Change your CID to SuperCID:
Code:
fastboot oem writecid 11111111
fastboot reboot-bootloader
and confirm your cid is now 11111111 (8 times 1) using "fastboot getvar all"
Download the attached firmware.zip file and save it in your adb/fastboot folder on your computer
Then with the phone in bootloader mode:
Code:
fastboot oem rebootRUU
phone will reboot to a black screen with silver HTC logo (RUU mode), you can now flash the firmware:
Code:
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
You'll have to do the "fastboot flash zip" command twice, fist time it will fail. Ignore the green progress bar on your phone, it will not reach 100% just confirm in the command window that everything is OK.
Now that you are back in bootloader make sure your hboot is now 1.57 and your version-main is 7.19.401.102. If yes go back in ruu mode and flash the RUU:
Code:
fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_U_L50_SENSE60_MR_HTC_Europe_7.19.401.151_Radio_4T.35.3218.16_10.33Q.1718.01D_release_458806_signed.zip
fastboot reboot
Make sure to use htc_fastboot to flash the RUU and not the regular fastboot.
NOTE: I didn't hide the meid field.. it's all zeros (is that okay?)[/QUOTE]
Thats fine, only CDMA phones have both an IMEI and MEID numbers (yours is GSM and only have an IMEI number)

alray said:
Since your phone is S-OFF you can simply flash the international version on it but before flashing the international RUU, you'll have to change your CID and then update your firmware.
Download these 2 files and save it in your adb/fastboot folder on your computer:
RUU: https://www.androidfilehost.com/?fid=24391638059058554
htc_fastboot.exe (this version is needed to flash the RUU, not the regular fastboot): https://www.androidfilehost.com/?fid=24341993505161791
Change your CID to SuperCID:
Code:
fastboot oem writecid 11111111
fastboot reboot-bootloader
and confirm your cid is now 11111111 (8 times 1) using "fastboot getvar all"
Download the attached firmware.zip file and save it in your adb/fastboot folder on your computer
Then with the phone in bootloader mode:
Code:
fastboot oem rebootRUU
phone will reboot to a black screen with silver HTC logo (RUU mode), you can now flash the firmware:
Code:
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
You'll have to do the "fastboot flash zip" command twice, fist time it will fail. Ignore the green progress bar on your phone, it will not reach 100% just confirm in the command window that everything is OK.
Now that you are back in bootloader make sure your hboot is now 1.57 and your version-main is 7.19.401.102. If yes go back in ruu mode and flash the RUU:
Code:
fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_U_L50_SENSE60_MR_HTC_Europe_7.19.401.151_Radio_4T.35.3218.16_10.33Q.1718.01D_release_458806_signed.zip
fastboot reboot
Make sure to use htc_fastboot to flash the RUU and not the regular fastboot.
NOTE: I didn't hide the meid field.. it's all zeros (is that okay?)
Click to expand...
Click to collapse
Thats fine, only CDMA phones have both an IMEI and MEID numbers (yours is GSM and only have an IMEI number)[/QUOTE]
Hey alray,
Thanks for the instructions, but I have a question..
The fastboot you mentioned, ends with '.exe', which means it's for Windows, and I couldn't get my Windows to recognize my phone, so I'm using Ubuntu..
How can I get this fastboot for linux?
Thanks alot

MahmoudM10 said:
Hey alray,
Thanks for the instructions, but I have a question..
The fastboot you mentioned, ends with '.exe', which means it's for Windows, and I couldn't get my Windows to recognize my phone, so I'm using Ubuntu..
How can I get this fastboot for linux?
Thanks alot
Click to expand...
Click to collapse
Idk if there is a Linux version but there is a Windows and a MacOS version on htcdev.com

thanks boyy
thanks friends