Dear Senior members,
I was trying to do OTA update on my rooted+TWRP recovery installed oneplus 3. after downloading update i did reboot and stuck now in TWRP recovery .
I was not aware of that we shouldn't do OTA update on rooted phone, now i can only access TWRP and fastboot mode only.
Please help me in making my phone back to normal boot.
Thanks in advance!
Flash the full rom through twrp...Not the ota....
I have the same problem. with TWRP 3.0.3-0 (crying::crying::crying:
cultofluna said:
Flash the full rom through twrp...Not the ota....
Click to expand...
Click to collapse
pls share the link for the full rom. on onplus plus website latest availabe version is Version 3.5.3. where do i get the version 4.
Will i be able to do normal system boot after flashing full rom through TWRP?
in my case, my TWRP is 3.0.3-0 . It can't boot any rom (because it has password )
May be I will try to flash TWRP 3.0.3-1 by fastboot
https://forum.xda-developers.com/oneplus-3t/development/recovery-twrp-oneplus-3t-t3507308
or Unbick tool
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Please share with me if you succeed .
---------- Post added at 02:45 AM ---------- Previous post was at 02:40 AM ----------
ashokyadav668 said:
pls share the link for the full rom. on onplus plus website latest availabe version is Version 3.5.3. where do i get the version 4.
Will i be able to do normal system boot after flashing full rom through TWRP?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-3t/how-to/rom-oos4-0-nougat-op3t-leaked-t3523482
I think it will be possible if you flash rom through USB OTG. (Because if you cant boot into system you will not copy the rom to OP3t storage.)
---------- Post added at 03:08 AM ---------- Previous post was at 02:45 AM ----------
Hi. I've flash succeed the rom.
1. you boot into TWRP
2. make a back up on TWRP
3. Connect to PC , then you can copy rom to storage
4. copy the rom to TWRP folder
5. Flash rom from TWRP
and it boot into system
bebanghonbi said:
in my case, my TWRP is 3.0.3-0 . It can't boot any rom (because it has password )
May be I will try to flash TWRP 3.0.3-1 by fastboot
https://forum.xda-developers.com/oneplus-3t/development/recovery-twrp-oneplus-3t-t3507308
or Unbick tool
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Please share with me if you succeed .
---------- Post added at 02:45 AM ---------- Previous post was at 02:40 AM ----------
https://forum.xda-developers.com/oneplus-3t/how-to/rom-oos4-0-nougat-op3t-leaked-t3523482
I think it will be possible if you flash rom through USB OTG. (Because if you cant boot into system you will not copy the rom to OP3t storage.)
---------- Post added at 03:08 AM ---------- Previous post was at 02:45 AM ----------
Hi. I've flash succeed the rom.
1. you boot into TWRP
2. make a back up on TWRP
3. Connect to PC , then you can copy rom to storage
4. copy the rom to TWRP folder
5. Flash rom from TWRP
and it boot into system
Click to expand...
Click to collapse
Hi,
i tried, but again after successful ROM installation it reboots into TWRP instead of system.
Did you update the TWRP first because i am on Ver 3.0.3-0 & the ROM i am trying to flash is 3.5.4 downloaded from oneplus website.
ashokyadav668 said:
Hi,
i tried, but again after successful ROM installation it reboots into TWRP instead of system.
Did you update the TWRP first because i am on Ver 3.0.3-0 & the ROM i am trying to flash is 3.5.4 downloaded from oneplus website.
Click to expand...
Click to collapse
You should flash recovery first (you down load twrp.img 3.0.3.1 and copy to storage ) you boot into twrp then flash the recovery . img. After that version of twrp is 3.0.3-1. Then flash rom. It's ok. Remember wipe cache/davik
---------- Post added at 05:43 AM ---------- Previous post was at 05:42 AM ----------
I succeed. And feed back by op3t os4. 0.2
Ok, now problem solved!
i updated TWRP to latest version(3.0.3-1) & install the latest available full ROM in download section(V 3.5.4) of oneplus website.
Please share if you have a reliable link for the latest full ROM (V4.0.2).
Appreciate your help @bebanghonbi @cultofluna :good:
Because version 3.0.3-0 is error. When you flash 3.0.3-1. All done
---------- Post added at 05:50 AM ---------- Previous post was at 05:49 AM ----------
Link is above
---------- Post added at 05:50 AM ---------- Previous post was at 05:50 AM ----------
https://forum.xda-developers.com/oneplus-3t/how-to/rom-oos4-0-nougat-op3t-leaked-t3523482
---------- Post added at 05:55 AM ---------- Previous post was at 05:50 AM ----------
The problem is twrp 3.0.3.0 hi. I'm happy when you solved the problem.
Related
I have debloated the stock ROM and replaced the touch wiz apps with custom ones.
Working perfectly fine on SM-G531F
Rooted
Xposed installed
With better RAM management
Works faster than bloated Touchwiz stock
Have a try
Download Link
Custom Stock For SM-G531F
It is a TWRP backup. So, install TWRP before trying this ROM.
TWRP download here
Odin download here
Skip to step 4 if you have installed TWRP
1) Download TWRP
2) Flash it with Odin
3) Reboot
4) Download the file from the above link
5) Unzip it
6) copy the folder to TWRP location
7) Reboot in TWRP recovery mode
8) Restore
9) Reboot to system and Enjoy
10) Hit Thanks!!
Sincerely,
TechnoR1
Thanks bro
---------- Post added at 04:40 PM ---------- Previous post was at 04:28 PM ----------
Link dont work
---------- Post added at 05:25 PM ---------- Previous post was at 04:40 PM ----------
https://www.dropbox.com/s/ar1g1un5czgfhhb/2017-04-02--12-58-37_LMY48B.G531FDDU1APJ2.zip?dl=0 THIS LINK WORK THAT IS IN MASTER THREAD
TechnoR1 said:
I have debloated the stock ROM and replaced the touch wiz apps with custom ones.
Working perfectly fine on SM-G531F
Rooted
Xposed installed
With better RAM management
Works faster than bloated Touchwiz stock
Have a try
Download Link
Custom Stock For SM-G531F
It is a TWRP backup. So, install TWRP before trying this ROM.
TWRP download here
Odin download here
Skip to step 4 if you have installed TWRP
1) Download TWRP
2) Flash it with Odin
3) Reboot
4) Download the file from the above link
5) Unzip it
6) copy the folder to TWRP location
7) Reboot in TWRP recovery mode
8) Restore
9) Reboot to system and Enjoy
10) Hit Thanks!!
Sincerely,
TechnoR1
Click to expand...
Click to collapse
Thank u very much bro i was searching for a custom rom from years.
I moved unziped file to twrp but when i opened twrp and seleted restore option nothing is showing.
TechnoR1 said:
I have debloated the stock ROM and replaced the touch wiz apps with custom ones.
Working perfectly fine on SM-G531F
Rooted
Xposed installed
With better RAM management
Works faster than bloated Touchwiz stock
Have a try
Download Link
Custom Stock For SM-G531F
It is a TWRP backup. So, install TWRP before trying this ROM.
TWRP download here
Odin download here
Skip to step 4 if you have installed TWRP
1) Download TWRP
2) Flash it with Odin
3) Reboot
4) Download the file from the above link
5) Unzip it
6) copy the folder to TWRP location
7) Reboot in TWRP recovery mode
8) Restore
9) Reboot to system and Enjoy
10) Hit Thanks!!
Sincerely,
TechnoR1
Click to expand...
Click to collapse
i need this rom in sm-g530h
xufy3n said:
i need this rom in sm-g530h
Click to expand...
Click to collapse
Oops!! I don't have the device
:good:
Moved unziped file to twrp but when i opened twrp and seleted restore option nothing is showing.
How to unlock FRP lock someone please reply
richie325 said:
How to unlock FRP lock someone please reply
Click to expand...
Click to collapse
Remove your Google and Samsung account
Its giving me error on the installation proces eeror installing zip file ? help?
---------- Post added at 09:48 AM ---------- Previous post was at 09:45 AM ----------
erminatoryt said:
its giving me error on the installation proces eeror installing zip file ? Help?
Click to expand...
Click to collapse
ps: Meta inf file not foud update binary or something help
After isntalling the backup my setting dont work etc any help =?
ErmiNatorYT said:
Its giving me error on the installation proces eeror installing zip file ? help?
---------- Post added at 09:48 AM ---------- Previous post was at 09:45 AM ----------
ps: Meta inf file not foud update binary or something help
Click to expand...
Click to collapse
Looks at the OP
It says Restore from the steps
That means its a backup from TWRP, not a flashable zip
No problem flash G531FXXU1APG2?
Confirmed Working...!!!! Galaxy Grand Prime SM-531F
Just loaded your backup rom. It worked flawlessly. Searching for bugs but none until now.
Copy extracted folder "2017-04-02--12-58-37_LMY48B.G531FDDU1APJ2" to "TWRP/Backups/" and restore from TWRP
Thanks a million...!!!
I will give a video tutorial
in this rom why clock is not present?????
TechnoR1 said:
Oops!! I don't have the device
Click to expand...
Click to collapse
TechnoR1 I have installed your custom stock ROM but this rom why can't contain clock plz reply
Video tutorial tomorrow coming
ganeshbakare said:
TechnoR1 I have installed your custom stock ROM but this rom why can't contain clock plz reply
Click to expand...
Click to collapse
download it from playstore
TechnoR1 said:
I have debloated the stock ROM and replaced the touch wiz apps with custom ones.
Working perfectly fine on SM-G531F
Rooted
Xposed installed
With better RAM management
Works faster than bloated Touchwiz stock
Have a try
Download Link
Custom Stock For SM-G531F
It is a TWRP backup. So, install TWRP before trying this ROM.
TWRP download here
Odin download here
Skip to step 4 if you have installed TWRP
1) Download TWRP
2) Flash it with Odin
3) Reboot
4) Download the file from the above link
5) Unzip it
6) copy the folder to TWRP location
7) Reboot in TWRP recovery mode
8) Restore
9) Reboot to system and Enjoy
10) Hit Thanks!!
Sincerely,
TechnoR1
Click to expand...
Click to collapse
I restored this folder from TWRP and when i am rebooting system it's stuck at Samsung Grand Prime Powered by Android. Any fix?
hi there
i had MIUI 9 Global Stable Rom and then install below rom :
https://forum.xda-developers.com/xi...t/pixel-2-rom-v1-redmi-4x-2017-11-04-t3700153
now my root access is gone and I want to flash SuperSU from recovery again but power key + Vol up do not work to boot into recovery !!!
how can I solve that ?
Press Power, Volume up and Volume down at the same Time.
When you see the mi-logo release only Power.
---------- Post added at 02:21 PM ---------- Previous post was at 02:17 PM ----------
I recommend to install the newest Firmware from this Thread.
Take the last V027 link.
https://forum.xda-developers.com/xiaomi-redmi-4x/how-to/firmwares-t3682965
Is this the correct sequence to flash a custom stable ROM for the FIRST time?
1. Unlock bootloader. Done.
2. Flash latest TWRP (or ZCX TWRP) or step 3 first?
3. Flash minimal required firmware from
(i) miui[dot]com/download-299.html (necessarily 8.1.4 or latest 8.1.25 ?)
OR
(ii) miui[dot]com/a-234.html (according to LOS 14.1 post by bgcngm ) ?
4. Flash minimal required firmware using Miflash tool ... clean all OR save user data OR clean all and lock?
5. Flash LOS and then Gapps using TWRP.
6. Wipe internal storage? So I lose everything?
7. Can I use MIUI's inbuilt tool for backup of my MIUI 9?
8. How do you root? Magisk or LineageOS su addon? Do both survive OTA updates?
Unlock
Twrp latest
If u are on latest no need to flash again
Min 8.14 or above firmware
Then put los15.1&gapps8.1
Wipe all including internal memory
Then install rom +gappas
Just boot up thats all
If u don't wipe internal phone goes to encrypted stage
Thats all done
---------- Post added at 10:29 PM ---------- Previous post was at 10:26 PM ----------
Use magisk zip and just flash the zip for rooting
Thanks a lot! Although , still, I would want someone to be more specific...
Hello,
what's the best rom for P8 Lite (2017)?
What is this GSI it's good? and how to install it?
tks
olivi25 said:
Hello,
what's the best rom for P8 Lite (2017)?
What is this GSI it's good? and how to install it?
tks
Click to expand...
Click to collapse
There is no Best Rom for any device, it depends on the user.
GSI is Generic System Image. These are also known as Treble Roms. You may say that these are universal roms. For more info, Google it?
Installation :
Requirements
1) Unlocked Bootloader
2) must have stock recovery
Flash the rom via Fastboot ( important), once done, reboot to stock Erecovery and factory reset ( don't ever do it via TWRP)
Now restart the mobile and let it boot.
Now it should boot normally.
Now Flash TWRP to have Gapps, use Nano Open Gapps because they work well.
Steps that I took : after flashing Gapps, I flashed stock recovery and factory reset the device, you may ask why?
Because if I wipe cache via TWRP on my mobile, it causes bootloop ( I don't know why)
---------- Post added at 11:36 AM ---------- Previous post was at 11:33 AM ----------
Before proceeding, you must have huru Updator and your Stock rom. Just in case
---------- Post added at 11:36 AM ---------- Previous post was at 11:36 AM ----------
BTW I'm using Havoc OS 2.9
I am rooted and current version i am on is V2.45 and i have been received V.3.25. i am so eager to update it but afraid since i am rooted because Android Q doesn't work with rooted.
Help needed.. Experts...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How dude, I'm still stuck with Android 9 here
kiranaxel said:
I am rooted and current version i am on is V2.45 and i have been received V.3.25. i am so eager to update it but afraid since i am rooted because Android Q doesn't work with rooted.
Help needed.. Experts...
Click to expand...
Click to collapse
Is it andriod beta or final release??
HyperPalBuddy said:
How dude, I'm still stuck with Android 9 here
Click to expand...
Click to collapse
I am on Chinese rom bro
walkwitmeinhel said:
Is it andriod beta or final release??
Click to expand...
Click to collapse
Beta
kiranaxel said:
I am rooted and current version i am on is V2.45 and i have been received V.3.25. i am so eager to update it but afraid since i am rooted because Android Q doesn't work with rooted.
Help needed.. Experts...
Click to expand...
Click to collapse
You can visit website nubia and download Rom V3.25
last updated
---------- Post added at 08:26 AM ---------- Previous post was at 08:25 AM ----------
HyperPalBuddy said:
How dude, I'm still stuck with Android 9 here
Click to expand...
Click to collapse
As above!!
Redmagic 3 Android 10
Android 10 on Chinese rom feels a lot smoother than Android 9 and trust me redmagic version 8 is so much better than the previous one. There is still no option to change launcher.
Redmagic Android 10
No major update in the camera department. Ui feels a lot smoother game space has also been styled with same theme which is found on redmagic 5G. A new option is added on the game space left toggle named as aim assist which actually create a overlayed crosshair. There is also option given in settings as well as in the game space toggle by which we change change the screen refresh rate between 60hz to 90hz.
Amandogra1997 said:
Android 10 on Chinese rom feels a lot smoother than Android 9 and trust me redmagic version 8 is so much better than the previous one. There is still no option to change launcher.
Click to expand...
Click to collapse
How did you install Gapps? Using otg?
souma_rox said:
How did you install Gapps? Using otg?
Click to expand...
Click to collapse
I installed twrp then Gapps. I also flash Magisk so now my phone is rooted.
souma_rox said:
How did you install Gapps? Using otg?
Click to expand...
Click to collapse
I flashed by twrp by just putting the zip in the internal memory and and also flash magisk cause without it Google services are not working
How ?
How ?
tknguyencsu said:
I installed twrp then Gapps. I also flash Magisk so now my phone is rooted.
Click to expand...
Click to collapse
edwsaldana said:
How ?
Click to expand...
Click to collapse
Follow the instruction in the following thread:
https://forum.xda-developers.com/red-magic-3/development/recovery-unofficial-twrp-nubia-red-t3962482
somebody knows how to change launcher?
I'm on V1.20
Which rom am ai exactly on? Because the rom versions stated on nubia website doesn't match what I got.
Just updated to 3.25
RM3
With Twrp + Magisk + Pico Gapps
Successfully Rooted
---------- Post added at 10:40 AM ---------- Previous post was at 10:28 AM ----------
I was using Chinese ROM 2.45
I just Downloaded Latest Rom Zip File
TWRP. Img file
Magisk zip file
All on mobile
No need of pc
When all files downloaded
reboot in to Recovery mode and flash Latest Rom
After flashing Latest Rom
Don't Reboot your device
Just press back and find twrp. Img file(you can select file extension in TWRP which you want to flash like Zip file or img file)
Just find twrp img file and flash it
When you flashing you will get options boot , system , recovery etc
Just select Recovery and swipe to flash
After flashing TWRP img file
Go to Reboot menu of TWRP
And tap on Reboot Recovery & Swipe to Reboot.
When recovery boots again
Just flash Magisk first then flash Pico Gapps.
After all these steps just reboot your device
It will take 10 to 15 minutes
If any Question you can ask me.
Latest Rom Download Link
TWRP file Download Link
---------- Post added at 10:40 AM ---------- Previous post was at 10:40 AM ----------
You can find Gapps and Magisk zip on Google.
sensor problem after downgrading android 10 to android 9
I have flashed android to test new features as I was testing I noticed that there is some pubg lag issues and also the ping which I usually get on android 9 was not the same on android 10. Pubg is not as smooth as android 10 so I decided to downgrade to android 9 but right after downgrading I noticed all of my sensor except fingerprint were not working i tried everything to make the sensors working but all in vain so at last I have to flash the rom via tool using edl mode after that everything came back to normal.
This is the process to downgrade to android 9.
Just use unbrick tool works for andriod 10 to everthing wil be fine
..::Farrukh::.. said:
Just updated to 3.25
RM3
With Twrp + Magisk + Pico Gapps
Successfully Rooted
---------- Post added at 10:40 AM ---------- Previous post was at 10:28 AM ----------
I was using Chinese ROM 2.45
I just Downloaded Latest Rom Zip File
TWRP. Img file
Magisk zip file
All on mobile
No need of pc
When all files downloaded
reboot in to Recovery mode and flash Latest Rom
After flashing Latest Rom
Don't Reboot your device
Just press back and find twrp. Img file(you can select file extension in TWRP which you want to flash like Zip file or img file)
Just find twrp img file and flash it
When you flashing you will get options boot , system , recovery etc
Just select Recovery and swipe to flash
After flashing TWRP img file
Go to Reboot menu of TWRP
And tap on Reboot Recovery & Swipe to Reboot.
When recovery boots again
Just flash Magisk first then flash Pico Gapps.
After all these steps just reboot your device
It will take 10 to 15 minutes
If any Question you can ask me.
Latest Rom Download Link
TWRP file Download Link
---------- Post added at 10:40 AM ---------- Previous post was at 10:40 AM ----------
You can find Gapps and Magisk zip on Google.
Click to expand...
Click to collapse
its twrp had encrypted yours folders or folders cant be shown ?
which version of magisk did you flash? I tried with the last one but I get an error
..::Farrukh::.. said:
Just updated to 3.25
RM3
With Twrp + Magisk + Pico Gapps
Successfully Rooted
---------- Post added at 10:40 AM ---------- Previous post was at 10:28 AM ----------
I was using Chinese ROM 2.45
I just Downloaded Latest Rom Zip File
TWRP. Img file
Magisk zip file
All on mobile
No need of pc
When all files downloaded
reboot in to Recovery mode and flash Latest Rom
After flashing Latest Rom
Don't Reboot your device
Just press back and find twrp. Img file(you can select file extension in TWRP which you want to flash like Zip file or img file)
Just find twrp img file and flash it
When you flashing you will get options boot , system , recovery etc
Just select Recovery and swipe to flash
After flashing TWRP img file
Go to Reboot menu of TWRP
And tap on Reboot Recovery & Swipe to Reboot.
When recovery boots again
Just flash Magisk first then flash Pico Gapps.
After all these steps just reboot your device
It will take 10 to 15 minutes
If any Question you can ask me.
Latest Rom Download Link
TWRP file Download Link
---------- Post added at 10:40 AM ---------- Previous post was at 10:40 AM ----------
You can find Gapps and Magisk zip on Google.
Click to expand...
Click to collapse