Database Develop

ZUK Z2Pro Bricked

Help! I think i flashed something wrong for my Z2Pro, now it's stuck in recovery/fastboot mode, i can still access the menu, but i cannot flash anything via fastboot, my computer says waiting for adb device, inputting the command adb devices show nothing. Trying to flash stock ROM via QFIL but instead of port 9008, its showing port 900E, if i try to flash, it says this:
Download Fail: Switch to EDL Fail Failed to switch to Emergency Download Mode.

@OP
Try this method, I think you'll be OK!
But you need to use Google Translation!
and download a Rom from the "Rom Section".
Good luck.
http://www.zukfans.it/2016/07/06/gu...procedure-di-aggiornamento-sui-terminali-zuk/
Edit: I just saw your thread over "ZUK Fans Europe", I'm glad you got it working again!

Yup! Thanks!

Guys I am facing the exact same problem.
Could you please let me know how you resolved it.
Thanks

@digitalguy13 and @alvintan38, did you already solve it? I have the same problem

DavidWel said:
@digitalguy13 and @alvintan38, did you already solve it? I have the same problem
Click to expand...
Click to collapse
Maybe you can get it to work trying this guide: http://www.androidbrick.com/zuk-z2-z2-pro-qpst-qfil-miflash-rom-flashing-guide/

Thanks for the suggestion, I managed to fix the 900e message using the DIY cable. This was a really easy solution So for anyone, which encouters the same problem, just follow the guide from zukfans called "deep-flash-revive-your-zuk-z2-from-hard-brick-state-9008-mode-easily" (sorry, I'm not allowed to post links yet)

LG L Fino D290n makes error on boot.No download mode or recovery,please help!

Yesterday a LG L Fino was brought to me for repair.It makes an error on boot.The error is the boot certificate verify error.I cannot fix this!
I tried booting in recovery,gives me the boot screen,then the error,black screen.
I tried download mode,same.
I even tried flashing it,but LG Flash Tool does not recognize it.When i connect the phone a whole alphabet of drives would appear with LG Logos on them.I was able to only open one of them,the size was 64MB and it stored a image folder.Device manager recognizes the phone as QHSUSB_BULK and a ton of Unknown Devices would appear,after that they disappear and the phone will be recognized as LGE AndroidNet USB Serial Port(COM4).Thank you :angel:

filipkosteski said:
Yesterday a LG L Fino was brought to me for repair.It makes an error on boot.The error is the boot certificate verify error.I cannot fix this!
I tried booting in recovery,gives me the boot screen,then the error,black screen.
I tried download mode,same.
I even tried flashing it,but LG Flash Tool does not recognize it.When i connect the phone a whole alphabet of drives would appear with LG Logos on them.I was able to only open one of them,the size was 64MB and it stored a image folder.Device manager recognizes the phone as QHSUSB_BULK and a ton of Unknown Devices would appear,after that they disappear and the phone will be recognized as LGE AndroidNet USB Serial Port(COM4).Thank you :angel:
Click to expand...
Click to collapse
Will the device boot to fastboot? Does the device respond to adb commands?
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Droidriven said:
Will the device boot to fastboot? Does the device respond to adb commands?
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Sorry i was inactive,but the LG L Fino is gone now i do not need help.Thank you

Droidriven said:
Will the device boot to fastboot? Does the device respond to adb commands?
DO NOT CONTACT ME VIA PM TO RECEIVE HELP, YOU WILL BE IGNORED. KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Hi, I have the same problem, here is the picture of my screen.
I have tried to follow these steps, but my phone cannot enter Secure boot mode.
Any idea what can I do?
thanks

ndr113 said:
Hi, I have the same problem, here is the picture of my screen.
I have tried to follow these steps, but my phone cannot enter Secure boot mode.
Any idea what can I do?
thanks
Click to expand...
Click to collapse
Hey there
I have a LG L90 D410 (Similar Qualcomm Device)
And I faced the same issue after a bad flash.
Did you flash anything?
Does the LG logo show up?
Please answer the above questions so I would be able to solve your problem

Gaptain4 said:
Hey there
I have a LG L90 D410 (Similar Qualcomm Device)
And I faced the same issue after a bad flash.
Did you flash anything?
Does the LG logo show up?
Please answer the above questions so I would be able to solve your problem
Click to expand...
Click to collapse
Hello sir!
I have never flash the phone. The first problem that I have seen was after one restart, it won't boot the os, I have seen the LG logo and after that it keeps reboots again. I have entered in recovery mode and wipe all data, but it didn't help. After that I started to see the message above(error) and that's all. My battery is completely empty and cannot charge it because the phone doesn't charge.

ndr113 said:
Hello sir!
I have never flash the phone. The first problem that I have seen was after one restart, it won't boot the os, I have seen the LG logo and after that it keeps reboots again. I have entered in recovery mode and wipe all data, but it didn't help. After that I started to see the message above(error) and that's all. My battery is completely empty and cannot charge it because the phone doesn't charge.
Click to expand...
Click to collapse
Hey there did you use advanced wipe to clear your data or was it factory reset.
If the LG Logo shows up and then the error comes then you can enter download mode by switching off the phone and then hold volume up key and at the same time insert a usb. You would enter download mode. If you enter the mode you can flash a KDZ
Gaptain4 here at your service :fingers-crossed:

Gaptain4 said:
Hey there did you use advanced wipe to clear your data or was it factory reset.
If the LG Logo shows up and then the error comes then you can enter download mode by switching off the phone and then hold volume up key and at the same time insert a usb. You would enter download mode. If you enter the mode you can flash a KDZ
Or If you want custom rom only,enter into recovery mode.
Then click wipe and then advanced wipe.
Check data
Check System
Check Dalvik/art
Check Cache.
And then Press install and download the suitable rom for you phone.
If you cannot resolve the problem contact me again
Gaptain4 here at your service :fingers-crossed:
Click to expand...
Click to collapse
No, they didn't use advanced wipe because they don't have a custom recovery installed. If you read their post more carefully, you'll see where they said that they never flashed the device, this means they have stock recovery, not custom recovery. None of what you posted helps them.
Sent from my LGL84VL using Tapatalk

Droidriven said:
No, they didn't use advanced wipe because they don't have a custom recovery installed. If you read their post more carefully, you'll see where they said that they never flashed the device, this means they have stock recovery, not custom recovery. None of what you posted helps them.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
Hey there thank for informing me.
He can still enter into download mode and flash kdz using flash tool
Custom Rom cannot be flashed
But a stock rom can be flashed and can be fixed.
Its a soft brick so he can surely flash a stock rom and recover his phone :fingers-crossed:\
When you try to charge your phone it doesn't show the charging status
But when you completely drain your battery to 0% it will show 0% and shows charging and you can confirm that it is charging

hi everyone
i have a LG L25
and i think i messed up flashing it using TWRP.
it stuck in FIRMWARE UPDATE screen and i cant access its TWRP mode
please help me

Marclance said:
hi everyone
i have a LG L25
and i think i messed up flashing it using TWRP.
it stuck in FIRMWARE UPDATE screen and i cant access its TWRP mode
please help me
Click to expand...
Click to collapse
Did you try to flash a stock update using TWRP?
If so, that is the problem. Stock updates can't be applied to a rooted device or a device that has TWRP installed, any one or both of these will interfere with applying the update. You can only apply stock updates to devices that have an unmodified system partition(no root, no Xposed) and have stock recovery, stock recovery is required for applying stock updates.
If this is what you did, your only option to fix this is to flash your full stock firmware. Do a Google search for:
"Return to stock (your model number)"
If the tools and files exist for your device, that should find it.
Sent from my LGL84VL using Tapatalk

Bricked! Help me please.

Hello everyone
My brother's Mi A2 is bricked for no reason. I tried to solve this problem and searched a lot but didn't manage to solve it. I hope you can help.
* before telling my story here is some stuff to know:
- The phone was running official firmware and bootloader is locked, I've never played with it's software before.
- Oem unlocking option isn't turned on.
- The phone doesn't go to recovery mode, only fastboot or regular boot.
- I used EDL mode in every flashing attempt.
- I don't remember that there is a mi account assigned to the device.
* Here is what happened:
- The phone suddenly shut down during a call and never passed the AndroidOne logo after that.
- Tried EDL mode and miflash to flash the latest firmware. Flashing completed successfully but the phone still stuck on the androidone logo.
- Did it again and again but the result was constant.
- Tried flashing older firmware "Oreo 8.1" but during flashing system.img the process stopped with an error. (I don't remeber what the error was).
- I tried to turn on the phone but after showing AndroidOne logo This message appeared:
"Your device is corrupt. It can't be trusted and will not boot.
Visit this link on another device: g.co/ABH"
and the device shuts down in a minute.
Hint: Sometimes when I try to turn one the phone the above message appears after androidone logo and sometimes the device just keep showing the logo.
- Trying to flash any firmware version by using Miflash Beta gives an error message "Can not found programmer file" immediately. when I try again it gives: "can't read from port COM4", Changing the port gives the same error with different port number.
-When I use any other version of "Portable miflash", The flashing process starts normally but fails when trying to flash "dsp.img", giving an error of "writing time out".
- I tried reinstalling all drivers needed with no change at all.
I hope that you guys can help me solving this problem.
Thank you so much!

Try EDL mode opening your phone...

Badotti said:
Try EDL mode opening your phone...
Click to expand...
Click to collapse
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.

Ahmed A. Mohsen said:
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...

Badotti said:
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...
Click to expand...
Click to collapse
I opened the phone and used edl mode already but the problem is still present.

up

Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x

HTCDevil said:
Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x
Click to expand...
Click to collapse
This needs bootloader to be unlocked and my device's bootloader is locked.
Any solutions?

Go to service center this is last option you save RIP mi a2 ?

As I can see from picture you have posted, your bootloader is unlocked.

SkullSatan88 said:
Go to service center this is last option you save RIP mi a2
Click to expand...
Click to collapse
They refused to receive my device because I bought it from another country.

bomil said:
As I can see from picture you have posted, your bootloader is unlocked.
Click to expand...
Click to collapse
when I checked bootloader status in the beginning it was locked.
Are you sure that it's now unlocked?

Text me on telegram. @dejavutr

Phone in Hard Brick mode

I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?

You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room

Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0

when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?

It worked, but how did you know all this? Just spot on :good:

I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!

Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress

Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?

Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9

dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!

htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?

I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.

Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc

Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs

Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.

Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?

Question hardbrick

my narzo 50 got hardbrick can someone help me?

You should better explain, how you ended with your device as it is right now, which modes you have available to enter to, how is acting your device...

please help i accidentally deleted the whole android via mtk client GUI and flashed RMX3151GDPR_11_A.44 on sp flash tool and it booted successfully but the touch stopped working and when i put it on charging it restarts automatically after a few seconds is it HW or SF? I really don't know what to do, do you have any solution?

SubwayChamp said:
You should better explain, how you ended with your device as it is right now, which modes you have available to enter to, how is acting your device...
Click to expand...
Click to collapse
it just like a brick, i cannot access fastboot or any modes

Be sure to try download mode, so you can use SPFT. Also, you have this tool to try it https://github.com/bkerler/mtkclient

SubwayChamp said:
Be sure to try download mode, so you can use SPFT. Also, you have this tool to try it https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
i cannot access anything , download mode, too :/

hoangnguyen320 said:
i cannot access anything , download mode, too :/
Click to expand...
Click to collapse
Sorry. But, are you sure, did you try to enter the download mode? What method did you try? Did you install the drivers for MediaTek? Did you check the devices were listed/updated in the Device Manager on Windows?
All the MediaTek devices, even in a serious brick state, can enter in download mode. Provide some screenshot, so someone can help you better.
Also, Realme devices have a "special" AKA different way to enter the fastboot mode, Which method did you try?

I think you need to disable protection for download mode to work,
if it worked for me, it must work for you.

also on the sp flash tool it booted to the welcome screen successfully, but after the flash the touch stopped working and when I put it on charge it automatically restarts after a few seconds

so I finally fixed it, it was a problem with the software because I had some empty partitions there that were important for touch and charging or for more things, and then I flashed them from the unofficial Realme ui 3.0, for Realme 8i, finally we touch and charging works.

User_Player_126 said:
so I finally fixed it, it was a problem with the software because I had some empty partitions there that were important for touch and charging or for more things, and then I flashed them from the unofficial Realme ui 3.0, for Realme 8i, finally we touch and charging works.
Click to expand...
Click to collapse
how did you manage to fix yours? I have the same issue on realme narzo 50 (RMX3286) where did you download your firmware? i need global rom