Related
Hi,
So, I got a Samsung Galaxy TAB 8.9 (GT-7300) WiFi+3G. Nordic/European version. I have a long history of rooting and running custom ROM's on my Android devices, but this time i f##ed up a bit.
1. Installed root_original.zip from this thread by copying it on to the tablet and applying it from stock recovery.
2. Booted and installed Superuser and ROM Manager from Market.
3. Used ROM Manager to install CWM for Galaxy Tab 10.1 (Yes, I know...).
4. Tab would not boot, but I could still get in to download mode. Browsed some XDA threads and came across this guy who seemed to have the same problem. I did not see that he had a P7310 (WiFi only) tablet. So, I used Odin 1.85 to install the bootloader, which was for the P7310, not for P-7300. Now, the tablet boots but the display is just flickering, like it is using a wrong refresh rate or wrong resolution. Not at all possible to read anything, but I can still get into Download mode.
5. Installed stock rom from here, specifically this one: P7300XWLA2------2012 January----P7300NEELA1-----Nordic countries----
Still no luck. The tablet boots into Android but the display is still flickering.
$20 for anyone who gets me out of this mess
Can you come in recovery ?
Than try this?
http://forum.xda-developers.com/showthread.php?t=1519564
There is an option in CWM under the mount and storage tab where stands mount usb connection click on that and move this to your tab after that install it
I hope it will work!
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Oh and btw, my advice is for free.
Hi safariking,
I can get in to recovery, but I'm unable to read anything, as the display is just flickering. I would need a press-by-press guide in order to perform the steps correctly... :/
Thanks kallt_kaffe, I'll try the swedish firmware and follow the guide step-by-step
kallt_kaffe said:
You could also try the Swedish firmware: http://hotfile.com/dl/146666862/13403b2/P7300XWKL4_P7300NSEKL1_NSE.zip.html
The NSE are usually pretty much the same as NEE with some swedish bloatware. Worth a try I guess.
Click to expand...
Click to collapse
Installs correctly but does not fix my display problem.
kallt_kaffe said:
Also see this guide for how to use Odin in case you did something wrong: http://forum.xda-developers.com/showthread.php?t=1406137
Click to expand...
Click to collapse
I followed the guide step-by-step. No errors occured during flashing.
kallt_kaffe said:
One thing that I've noticed when flashing with Odin is that even if I check the F.reset checkbox it still does not do a factory reset (at least it did not do it for me). You should be able to do a factory reset using the stock recovery.
Click to expand...
Click to collapse
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
kallt_kaffe said:
Oh and btw, my advice is for free.
Click to expand...
Click to collapse
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
snubbel said:
Installs correctly but does not fix my display problem.
I followed the guide step-by-step. No errors occured during flashing.
I can't really verify the factory reset. I can get into stock recovery, but the display is still rubbish so I can't do a manual factory reset.
I voted for you guys in ESC so I guess we're even
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
Wooow that looks not good man i think you must return it back to samsung
you can run a logcat maybe
snubbel said:
I have attached a photo of the tab in stock recovery so you can see what's wrong. This happens no matter if I start normally, recovery or download mode.
Click to expand...
Click to collapse
If you turn it off and charge it, is the charging-mode-display also distorted?
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to General
kallt_kaffe said:
If you turn it off and charge it, is the charging-mode-display also distorted?
Click to expand...
Click to collapse
If I turn it off it automatically turns back on and boots Android. So I can't see if the "charging while turned off" icon is also distorted.
kallt_kaffe said:
Also if I were you I would leave it on in download or recovery mode and let the battery drain completely. Worth a shot I guess.
Click to expand...
Click to collapse
I left it in download mode last night, it's still turned on. I'll let the battery drain and see what happens when I connect the charger.
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
snubbel said:
When I flash a complete ROM with Odin (e.g. the Swedish ROM you suggested) - is there anything left to flash that could be causing this? If I were to return the tablet to the dealer, will there be any evidence of dumb-user-flashing?
Click to expand...
Click to collapse
I honestly do not know.
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
nirogu325 said:
Have you tried flashing the PIT file (in the PIT section) along with the ODIN image (in the PDA section)? You can download the PIT file so you can click on Repartition, right here. It's a very small file. Be sure you have F.Reset Time checkmarked too. Best of lucks.
Click to expand...
Click to collapse
Re-partitioning with the PIT file along with the ROM did not help :/
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
snubbel said:
Thanks for your suggestion, but unfortunately: no luck.
Just to be sure this isn't a compatibility issue on my computer, I set up a clean install Win7. I'm using x64, could this be an issue?
Click to expand...
Click to collapse
As long as you have the right drivers installed, no. That's my setup.
I had a similar issue. It occured only when I turned display off and on, both in android and in battery charging mode while powered off. I just went back to the store and got it replaced. xD
Anyway the flickering began to show up after flashing 3.2 back from a 4.0 rom... So I think there was something wrong with the bootloader.. Didnt find any tar file containing the original bootloader.. Perhaps someone here can make it for you
hey,
i got same problem after i tried to install cm9. now i cant install nothing (i formated cash, data, system and preload) no data factory reset working. i have nonstop bootloops and format cache and dalvik not working but cwm ist starting but not working really. but can start download mode too ... so i think its not a super-brick for my gt 7300 from switzerland.
so, i will try to download from samMobile the original firmware and to flash with odin. anybody knows a tutorial with odin for gt 7300? cant find nothing for pit, csc, tar ...
please help me
thx sophie from switzerland
suwandiapr said:
If you flash a bootloader for P7310 so when you trying to flash P7300 ROM with odin, the bootloader will mapping all file just like P7310 with their partition Layout.. I think the pit file is not the solution..
First you need turn back the bootloader to original form.. I dont know where I can find P7300 bootloader..
After you finish with the bootloader, try to install P7300 Stock rom, with pit file and repartition..
I dont know if this post will help you.. but it worth to try..
EDIT:
maybe you can use firmware from P7300ZSKH5 from this link
This file include with bootloader and pit file..
Flash with Odin like image below
Sorry for my english..
Click to expand...
Click to collapse
I have to say, I was about to send the tablet to samsung, it was dead, no rom, no boot, no partition, no USB connection to store, what save me was the Odin up load that you recommended me, the tablet was really crashed.
I Think that is a sollution for actually almost any problem on the tablet (a complete format, sure, but still a good solution for ROM problems).
anyway, Many Thanks!!!!!!
Newbie try to help.
Have you try to install another CMW version using odin? Maybe it's caused by wrong CMW version. Try CMW v5.5.0.4 here http://forum.xda-developers.com/showthread.php?t=1312218
Hello,
I am a completely new person to all this flashing. I wanted to put ICS on my galaxy s. It is already on 2.3.3 and I just recently rooted it using superoneclick.
Odin was doing its thing, then it came up with 'FAIL'. Now my screen looks like this (see attachment) and will only let me go into download mode.
What can I do??
All help is greatly appreciated.
Hey
Dont panic..just read my UnBrick Guide (Below)..itll solve ur issue..else you can downgrade to a stock firmware and start all over again..
you also goes into charging? Try to flash a kernel by odin in pda unmarked pit or partition
Hey. That's not such a bad thing. Your phone has no software on it, that's why you can't start or go into recovery. Simply get a ROM that can be flashed via Odin and flash it. That'll solve everything.
U can find roms here:
http://forum.xda-developers.com/showthread.php?t=1102881
tzutzyalex said:
Hey. That's not such a bad thing. Your phone has no software on it, that's why you can't start or go into recovery. Simply get a ROM that can be flashed via Odin and flash it. That'll solve everything.
Click to expand...
Click to collapse
Thanks heaps,
Any chance that I could flash an ICS rom?
marcelle3 said:
Thanks heaps,
Any chance that I could flash an ICS rom?
Click to expand...
Click to collapse
Yes flash a GB stock rom with odin, cf root it, go into recovery and flash a custom rom of your choice
Could you please give a bit more detail on how to do this? Im sorry im just new to all this stuff.. Thanks heaps.
Help You
Please take a look here, you will find all the needed tools and soft
http://forum.xda-developers.com/showthread.php?t=948790&highlight=stock
No panic, read on the forum how to work with Odin. And you will be on track soon.
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
BIGGEST EDIT:
All of the methods in this thread are NOT WORKING. Still stops at factoryfs and CWM says "Installation Aborted". SO, WHAT I CAN DO? He is desperated, I'm desperated. PLEASE ANSWER FAST !!
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
Click to expand...
Click to collapse
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
msedek said:
He did successfully bricked his devices.. If you are not able to enter into download mode you have a paperweight in your hands... If he has warranty try to get it replaced.. If he doesn't then try the pit file method on the general forum..
You don't need any 3 files.. It's the same or at least the effect its the same with 1 or 3 files
Tapatalking on my n7000
Click to expand...
Click to collapse
He is able to enter into DL mode. Even PIT doesn't work.
Mr.Indigo said:
He is able to enter into DL mode. Even PIT doesn't work.
Click to expand...
Click to collapse
Well then your only option its the warranty or pay samsung either for a new phone or a mother board replacement...
That pit file method its only a partial solution to help you get your device partially working maybe a couple of months.. When the emmc bug happens it does damage the Emmc chip so the hardware its fried and there's no software that can repair it..
The pit method could work for someone but not for others.. Depends on the damage
Tapatalking on my n7000
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried it, but didn't work. This solution is too much dangerous?
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
It's doesn't matter if it's 1 or 3 files.. The pit file just repartition the emmc in order to reacomodate the memory and so you can flash the rom.. Flashing separately phone csc and PDA won't make any difference..
Tapatalking on my n7000
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
Mr.Indigo said:
Hello guys!
My friend gave his Galaxy Note for me to get a brick fix. He said that he flashed the German ICS STOCK ROM and wiped using CWM. He said that he entered in a bootloop. Then he tried to flash using ODIN, but it stopped at factoryfs, as known at the eMMC bug. In the bug, he disconnected the USB cable and he is seeing a message which says to connect to Kies and select recovery. But he said that didn't worked and Kies didn't recognized the phone. Even with ODIN, loaded with PIT and PDA, the phone wasn't able to receive factoryfs, the same file from the 1st error. I followed a lot of tutorials here on XDA and used the search to find a similar thread. He needs help, since recovery mode, charging mode and normal mode are blocked by the message. I need a ROM which contains the PDA, the CSC and the MODEM files. I already have the PIT, so I need those 3 files to try again.
--PHONE DETAILS--
Samsung Galaxy Note N7000
16GB Storage
LAST Firmware completelly flashed: XXLRQ (I think that is the firmware which you can't wipe)
ICS Stock
Thanks!
EDIT: I tried with another GB firmware and with an ICS firmware. Still NOT WORKING.
EDIT #2: The phone still have Download mode open!
Click to expand...
Click to collapse
I have the same problem!!!
I'm desperated, since it's my main phone!
I will try the last solutions!!!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
That's what I need.... I didn't found the 3 files. I will try!
andreaonelove said:
Have you tryed to flash a GB ROM with three files?
And the solution proposed here?
Click to expand...
Click to collapse
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Aldenucci said:
This solution is based on a GB kernel. I'm in the same situation as Mr.Indigo, with the same ROM and the same problems. I need to use CM9 kernel to use with ICS, right? Or I can use GB kernel?
Click to expand...
Click to collapse
IDK, you must do it at your own risk.
andreaonelove said:
Here I think you may find a solution for your problem.
If you think you need to flash the 3 files with odin try flashing an old GB ROM, you can find it here, some (NOT ALL) of the ROM in this post has PDA, CSC and PHONE part.
Good luck!
Click to expand...
Click to collapse
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Mr.Indigo said:
I tried this solution. The cellphone starts to make strange noises and a lot of characters entered in ADB command. Any other solution??
Click to expand...
Click to collapse
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
msedek said:
Yeah already told you.. Walk to the nearest samsung center and claim the warranty or pay for a replacement
Tapatalking on my n7000
Click to expand...
Click to collapse
He didn't have warranty. I'm trying to flash any PIT which owns factoryfs. He said that fails to wipe into some minutes and I have 88 factoryfs PITs. So I have to flash ALL of them to know. BTW I can flash a kernel using ODIN!
mistajoe83 said:
unfortunately sound like a brick to me. failed flashing via pc odin and stuck at factoryfs has something to do with your root. so i heard.. the best way is to send it to SSC for repair while you still have the warranty
Click to expand...
Click to collapse
My problem is SOLVED!
I found 88 PITs, whick it was intended for factoryfs. I tried the first ten PITs, and the 7th WORKED!
It was 17xx MB. Now the phone is working! THANKS FOR ALL OF YOUR GUYS HELP!
I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.
Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .
ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download
Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.
grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.
@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.
Hi Im trying to help out a friend whos note 4 SM N910T keeps booting in recovery mode. There is no possible way to flash another rom to fix it without the use of Odin but for some reason I cant find a ROM in .tar format to flash it.
Any help with this? Thanks
TempezT said:
Hi Im trying to help out a friend whos note 4 SM N910T keeps booting in recovery mode. There is no possible way to flash another rom to fix it without the use of Odin but for some reason I cant find a ROM in .tar format to flash it.
Any help with this? Thanks
Click to expand...
Click to collapse
Flash twrp recovery in odin and flash any n910t rom from twrp.
Trex888 said:
Flash twrp recovery in odin and flash any n910t rom from twrp.
Click to expand...
Click to collapse
Hi ,my note 4 boots on twrp only but for some reason will not mount internal xd,system,data anything I canot flash anything from withing phone, I try flashing stock with odin but something since to went run I can sure use a rom tar to give it a shot.
androidtv11 said:
Hi ,my note 4 boots on twrp only but for some reason will not mount internal xd,system,data anything I canot flash anything from withing phone, I try flashing stock with odin but something since to went run I can sure use a rom tar to give it a shot.
Click to expand...
Click to collapse
You cannot flash custom rom in odin even if it's in tar format.
Check twrp version should be latest and must be for your particular model.
Make wipe first before flashing any rom to avoid and errors.
Trex888 said:
You cannot flash custom rom in odin even if it's in tar format.
Check twrp version should be latest and must be for your particular model.
Make wipe first before flashing any rom to avoid and errors.
Click to expand...
Click to collapse
Thanks will try that.
Trex888 said:
You cannot flash custom rom in odin even if it's in tar format.
Check twrp version should be latest and must be for your particular model.
Make wipe first before flashing any rom to avoid and errors.
Click to expand...
Click to collapse
This is whats been happening.
androidtv11 said:
This is whats been happening.
Click to expand...
Click to collapse
You have emmc read fail if you see at the top in download mode.
You might look at link below could help.
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Trex888 said:
You have emmc read fail if you see at the top in download mode.
You might look at link below could help.
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Click to expand...
Click to collapse
Thank for the help.