Database Develop

GT-N7000 Usb Bricked !

I have been trying to find a solution for my usb bricked GT-N7000
I have rooted my stock GB rom and flashed a custom ICS rom which i cant remember since its been a long time.
I have wiped the rom too but after all the process phone was working flawlessly,
After a few months, i couldnt connect it to my laptop.
What i have done so far to fix,
1) Cleaned ports, no luck
2) flashed stock gb and ics roms, many other custom roms via mobile odin and cwm, no luck.
3) Checked eMMC bug threads and tried to look for a bad sector on my phone but all sectors were fine.
4) Tried to connect vie ADB but cant seem to get it working except wifi connection...
5) CWM can mount usb storage no matter which version i try.
6) Download mode doesnt trigger odin, despite the fact that i tried several usb cables on different pc's.
7) Factory reset, no luck.
8) Replaced the usb port, tried jig but no matter what i do, this cant seem to connect pc.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device ( USB Debugging On / Off )
I would really appreciate if anyone can assist me about this brick-saga.
I know that this is a quite long post but i tried to be in details as much as possible.

Have tried to manually download and install drivers for the phone on your PC if you do not have the proper drivers installed it will never connect search for n7000 drivers for PC and give it a try
sent from the DARKNESS

ttibbetts83 said:
Have tried to manually download and install drivers for the phone on your PC if you do not have the proper drivers installed it will never connect search for n7000 drivers for PC and give it a try
sent from the DARKNESS
Click to expand...
Click to collapse
Tried every possible solutions about the drivers.
Phone says charging but there is no notification on the pc.

are you trying mtp or mass storage

ttibbetts83 said:
are you trying mtp or mass storage
Click to expand...
Click to collapse
Tried both with GB-ICS-JB but no difference.

problem GT-N7000
Please Is there a solution to the problem of non-recognition computer
GT-N7000

Maybe KIES would help?

[q] vanir aosp

After installing update of VANIR AOSP (28TH AUG 2014) my phone has developed following issues:
1. Not able detect in any PC though other phones can with same cable. (USB Device Not Recognized)
2. Shows continuous charging even after charger disconnected till next reboot.
3. Error: Can't connect to network this time.
4. Wi-Fi direct not working.
Please guide to flash stock firmware through other than Odin. I have flashed other customized ROMs after all necessary wipe & dalvik cache wipe, but issues were remained same. Thanks in advance.

sumansave said:
After installing update of VANIR AOSP (28TH AUG 2014) my phone has developed following issues:
1. Not able detect in any PC though other phones can with same cable. (USB Device Not Recognized)
2. Shows continuous charging even after charger disconnected till next reboot.
3. Error: Can't connect to network this time.
4. Wi-Fi direct not working.
Please guide to flash stock firmware through other than Odin. I have flashed other customized ROMs after all necessary wipe & dalvik cache wipe, but issues were remained same. Thanks in advance.
Click to expand...
Click to collapse
You already have a guide for Odin:
http://forum.xda-developers.com/showthread.php?t=1985398
You MUST to have Samsung USB drivers installed. And use firmware for your phone, if it is non P then non P firmware - if it is P then P firmware.
BTW try to turn on allow mock location in developers settings. I remeber sometimes it helped me. And you did full clean install?

shut_down said:
You already have a guide for Odin:
http://forum.xda-developers.com/showthread.php?t=1985398
You MUST to have Samsung USB drivers installed. And use firmware for your phone, if it is non P then non P firmware - if it is P then P firmware.
BTW try to turn on allow mock location in developers settings. I remeber sometimes it helped me. And you did full clean install?
Click to expand...
Click to collapse
It was a clean installation. Tried to connect to PC after turning on mock installation but same error- USB device not recognized. Also not detected by Odin in download mode. Thanks in advance.

sumansave said:
It was a clean installation. Tried to connect to PC after turning on mock installation but same error- USB device not recognized. Also not detected by Odin in download mode. Thanks in advance.
Click to expand...
Click to collapse
Kill Odin on PC if you have it installed. In Task manager.

sumansave said:
After installing update of VANIR AOSP (28TH AUG 2014) my phone has developed following issues:
1. Not able detect in any PC though other phones can with same cable. (USB Device Not Recognized)
2. Shows continuous charging even after charger disconnected till next reboot.
3. Error: Can't connect to network this time.
4. Wi-Fi direct not working.
Please guide to flash stock firmware through other than Odin. I have flashed other customized ROMs after all necessary wipe & dalvik cache wipe, but issues were remained same. Thanks in advance.
Click to expand...
Click to collapse
Disable and enable android debugging aka usb debugging in developer options to solve USB device not recognized
Sent from my GT-I9070 using XDA Free mobile app

And turkish language not supported ?

Hard brick help 911

I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.

Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps

herculesPh said:
Just flash a stock rom from sammobile.com
Pre req:
*Odin(any vers)
*Stock rom
Steps
*Extract the downloaded stock rom in your PC
*In twrp wipe everything except internal, then boot in to download mode.
*Once in download mode, connect your phone to your pc, then open Odin.
*In Odin, check the "AP" section and locate the downloaded stock rom(the extracted one)
*Hit start.
Hpe that helps
Click to expand...
Click to collapse
Thank you for your reply but it seems you didn't read my post. My phone is not recognized by any pc.

What is the terminal command to restore a backup? That's pretty much my last ditch effort.

Well I broke my recovery so I'm screwed. I contacted Samsung and they said they would service it for free. Wish me luck.

What would cause the phone to stop being recognized by the PC? I narrowed it down to the MTP software or the micro usb charge port. My Windows computer says Device Descriptor Request Failed. Linux box does nothing. No USB devices are listed when I run lsblk.

weinerwad3000 said:
I'm in a big predicament. A few weeks ago I installed the MOAR ROM on my Note 5. After installing this ROM I was no longer able to connect my phone to PC. I tried a Windows 8 PC which says I have an unrecognized USB device plugged in. I tried going into Developer settings to set USB mode to MTP but the option didn't exist. I had all USB drivers installed as well. My wife's phone is recognized no problem. When plugging the phone into my linux machine absolutely nothing happened. It used to show the phone in the left navigation panel in my window manager but after installing MOAR ROM it was no longer detected.
Anyway, today I was trying to play Cartoon Wars 3 and since my phone is rooted it wouldn't let me play. I decided to go into the Super User app and disable it to see if the game would work and it didn't. When I went to re-enable the app it said installation failed and asked me to reboot. I clicked reboot and was sent into a boot loop. I thought okay no big deal, I'll just restore a backup in TWRP. When I go to restore the backup and select the backup file it asks which partitions to restore, but there are no boxes to check. It usually has options like system and data but now it's just blank. I tried a factory reset and I'm still in a bootloop. I'm at a complete loss. I don't know what else to do. I've tried download mode and everything but no matter what I do my phone isn't detected by my pc.
I appreciate any help. I don't know what to do. I'm out of a phone right now and don't have a backup. Not to mention I'm in between jobs right now and can't afford a new one right now.
Click to expand...
Click to collapse
you can try this code and test if it work
*#0808#

Familiaaa said:
you can try this code and test if it work
*#0808#
Click to expand...
Click to collapse
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.

weinerwad3000 said:
The phone does not boot. Recovery does not boot. The only thing the phone does is go into download mode. The phone does not connect to any computer so I cannot use odin.
Click to expand...
Click to collapse
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)

jubei79 said:
when your phone is in download mode,it doesn't work to connect it with samsung kies on your pc?
You could try using the Kies software to reload the stock firmware. Here's an overview of what to do:
- if you don't already have the Kies software installed on your PC, download it (just search Google) and install it. The first time it runs it'll update itself to the latest version so make sure you run it once before proceeding.
- put your phone in Download mode: with the phone completely off, press and hold the Volume Down and Home and Power buttons simultaneously, and release them all when you see the Samsung splash screen
- connect the phone to your PC with the USB cable that came with the phone
-- if you've never had the phone connected to your Windows-based computer before, you'll see messages about installing drivers, etc - just wait until this is done (may take 5 or 10 minutes) [I don't know what happens if you have a Mac - it probably just works]
- in the Kies software, select the second item in the Tools menu and just follow the prompts to enter the model number (in CAPS) and IMEI/Serial Number (both found under the battery - it's ok to remove the battery at this point)
- the Kies software should start downloading the correct firmware for your phone from the Internet; once that's done (depending on your Internet connection speed) it'll begin downloading that to the phone (this probably takes 10 minutes or so)
Click to expand...
Click to collapse
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.

weinerwad3000 said:
Kies doesn't work either. I already tried that. When I hook up the phone It says "Device Descriptor Request Failed". It used to connect to my computers until I put MOAR ROM on the phone. Since then it stopped being recognized by my computers. There's either something wrong with the connection or something got corrupted.
Click to expand...
Click to collapse
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html

jubei79 said:
What have you already tried?
- are you sure you're using a data cable and not a charging-only cable?
- have you tried a different computer?
- have you installed the Kies software?
- what does Device Manager show when the phone is connected?
- assuming that the phone is working normally, does the phone show anything when you connect it?
- do you have try windows 8 or 10?
can be you found a solution in this forum
http://forums.androidcentral.com/sa...-not-being-recognised-download-mode-odin.html
Click to expand...
Click to collapse
I've tried 4 different cables. My wife's S5 works perfectly fine on all computers. I have tried in Windows 7, 8, 8.1, and 10. I've also tried in Linux Mint. It used to work until I installed MOAR Rom. Windows says Device Descriptor Request Failed. Linux doesn't do anything when hooked up. lsblk doesn't show the device either.

I have a bit of an update. Apparently something happened with all my data cables. I hooked up my wife's phone the other day and I was all of a sudden receiving the same error as the note 5. I went out and bought a new data cable and now her phone connects again. I'm waiting for the Note 5 to charge up so I can try Odin. I'll post back my results.
I apologize to those who told me it was the cable. I just didn't see that it was conceivable that all 4 of my data cables were all of a sudden damaged. Never underestimate the ability of children to destroy every working cable you own.

Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.

weinerwad3000 said:
Well I'm still getting the error. I have some usb cables coming in the mail so once i try those out I'll get back to everyone.
Click to expand...
Click to collapse
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.

musab_bari said:
Were you able to fix your issue. I have the same issue. Note 5 N9208, I can get into Recovery (TWRP) and Download mode, but can not boot. The USB connection is showing USB Device Descriptor failed. I have tried 5 different cables and Windows 7/10 Ubuntu and cant get the phone to show up on the PC. I also have changed the USB port of the phone. Any insight would be helpful.
Click to expand...
Click to collapse
I ended up trying to replace the port and accidentally cut the ribbon for the LCD screen. Ended up getting a new phone.

couldn't connect to computer via MTP by cable to transfer files ?

hi all,
i'm new in forum, and i've just flashed this ROM theOne3TOS v3.6; after that my phone couldn't connect to computer via MTP to transfer files by cable (it only charging) (everything else stay normal, i have to boot to recovery and connect through Mount button to transfer files)
does anyone meet this problem ? and know how to fix this ?
thanks all.

bakhiem91 said:
hi all,
i'm new in forum, and i've just flashed this ROM theOne3TOS v3.6; after that my phone couldn't connect to computer via MTP to transfer files by cable (it only charging) (everything else stay normal, i have to boot to recovery and connect through Mount button to transfer files)
does anyone meet this problem ? and know how to fix this ?
thanks all.
Click to expand...
Click to collapse
Does the USB Connection type notification appear in the status bar?

ya7hu said:
Does the USB Connection type notification appear in the status bar?
Click to expand...
Click to collapse
no bro, it doesnt show any notification , it just show the LED light of charging through usb cable.
first time after flashing it still have notification shown to choose charging or change other methods: mtp / ptp / ....
then after i'd installed all apps & reboot phone to finish recover apps from Store, this problem shown up

bakhiem91 said:
no bro, it doesnt show any notification , it just show the LED light of charging through usb cable.
first time after flashing it still have notification shown to choose charging or change other methods: mtp / ptp / ....
then after i'd installed all apps & reboot phone to finish recover apps from Store, this problem shown up
Click to expand...
Click to collapse
I see, have you tried clearing the cache of MTP Host from Apps in the System Settings. Also try disabling USB Debugging.

I have this same issue using LOS 15.1. The solution is to go into Developer Settings and enable MTP using the 'Select USB Configuration' option. Then when you plug in via cable you will get the notification as normal. The problem is you have to do this every reboot, otherwise it's the same situation all over again. No Notification on plugging in and no way for your PC to see the device as it defaults to Charging mode.

I have "select USB conf" set as default (charging) and never had this issue. My PC sees the device even if I don't change the mode, I just don't see any files then. What drivers are you using?

przemcio510 said:
I have "select USB conf" set as default (charging) and never had this issue. My PC sees the device even if I don't change the mode, I just don't see any files then. What drivers are you using?
Click to expand...
Click to collapse
I just installed the Official Oneplus drivers but it didn't help. I didn't think it would. The generic Windows 10 drivers were working fine with LOS 14.1. As you said, the PC does see the phone just fine, but not files until MTP is enabled.
It's the lack of a Notification when plugging in that's the problem. Without the Notification i can't switch from Charging to MTP mode. I've tried all Notification levels too. The only way to get the Notification to appear is to use the MTP setting in Dev Options, and then it works.. until next reboot.
Edit: Enabling 'USB Debugging' seems to be a working fix currently!

ya7hu said:
I see, have you tried clearing the cache of MTP Host from Apps in the System Settings. Also try disabling USB Debugging.
Click to expand...
Click to collapse
DirkGently said:
I just installed the Official Oneplus drivers but it didn't help. I didn't think it would. The generic Windows 10 drivers were working fine with LOS 14.1. As you said, the PC does see the phone just fine, but not files until MTP is enabled.
It's the lack of a Notification when plugging in that's the problem. Without the Notification i can't switch from Charging to MTP mode. I've tried all Notification levels too. The only way to get the Notification to appear is to use the MTP setting in Dev Options, and then it works.. until next reboot.
Edit: Enabling 'USB Debugging' seems to be a working fix currently!
Click to expand...
Click to collapse
Thanks you guys, i've tried, but it still doesnt work for me, even when i flashed back to OOS OpenBeta 23, this problem still remain the same
i'm so confused ...

bakhiem91 said:
Thanks you guys, i've tried, but it still doesnt work for me, even when i flashed back to OOS OpenBeta 23, this problem still remain the same
i'm so confused ...
Click to expand...
Click to collapse
I spoke too soon about USB Debugging working. It doesn't help across reboots. Gonna Clean Install now. Hope you find a fix.

Clean install didn't help me. Just Google 'Oreo no mtp' to see how common this is.
I have a Nexus 5X on Oreo that doesn't have this problem. Other N5X owners do have it. It's totally random.

Good news everyone...
A fix is coming:
https://review.lineageos.org/#/c/209834/
At least for LOS 15.1 and any other ROMs based upon it.
@bakhiem91

USB connection dialogue not showing up, unable to connect

I have a very weird issue with my S10: it wont connect via usb to pc. Once connected a notification should display and the option "file transfer" should be there, but no such menu appears. When i plug it in to a pc it just starts charging, the pc also does not see a (bad) usb connection or whatever. I have been reading fora and watching youtube for over 1,5 hours. I feel now is the time to ask for help.
What might be usefull context: i have had the "moisture detected" error many times, it started showing up 2 weeks after i bought the device. Gladly i mainly use wireless charging so effectively it hasnt bothered me much, but it was weird since even after waiting for hours for the phone to dry (i dont think it was wet but whatever) the error was still there. One week ago the problem got quite severe, lasted for more than 24 hours and it just refused to charge, tried rebooting, turning it off, going into safe mode... to no avail. I had no wireless charger then, it was nasty.
I am using the usb cable provided by samsung (but used two others as well).
What i tried:
wiping cache and data from usb settings
wiping cache via recovery
reinstalling samsung drivers to pc
looking for a yellow exclamation mark in device manager on pc (not there)
different usb cables
different pc's
different ports on pc
rebooting the phone
booting in safe mode
installed dex on pc
via developper mode select file transfer as standard
via developper mode select any of the other modes to see if that helps
via developper mode revoked usb debugging authorizations
via developper mode enable usb debugging
The next logical step seems a factory reset. I am unwilling to do that however, since there are many gigs of photo's on the device that i want to backup first (the whole point of trying to connect it via usb heheh).
Your advice please!

Your could try to reflash your present OS via Odin but when doing so remember to use HOME_CSC. This way your data will be present when done flashing and phone reboots.

Norup58 said:
Your could try to reflash your present OS via Odin but when doing so remember to use HOME_CSC. This way your data will be present when done flashing and phone reboots.
Click to expand...
Click to collapse
How he can do the flash with odin when phone is not recognized by the computer !

Clean the charging port with a clean toothbrush and try again ... Also make sure that the charging cable supports data transfer ... If you tried all of these things and did not work, then most likely the charging port has a problem that may be oxidized or cut in the tracks..Try the solution that I gave it to you, and if it doesn't work, take it to a technician

charge from the wall.

I too have a similar predicament. Tried all the cables and USB ports I could get my hands on... I have a custom ROM also, so it could be that. I have done a full format and reflashed ROM (from SD card) - but it made no difference, the phone refuses to communicate via USB.
SO, if you have any solutions, please let me know!
I can however communicate via ADB over network. So, if you know some adb commands you can pull over an entire folder with the "adb pull" command.