hi all,
i'm new in forum, and i've just flashed this ROM theOne3TOS v3.6; after that my phone couldn't connect to computer via MTP to transfer files by cable (it only charging) (everything else stay normal, i have to boot to recovery and connect through Mount button to transfer files)
does anyone meet this problem ? and know how to fix this ?
thanks all.
bakhiem91 said:
hi all,
i'm new in forum, and i've just flashed this ROM theOne3TOS v3.6; after that my phone couldn't connect to computer via MTP to transfer files by cable (it only charging) (everything else stay normal, i have to boot to recovery and connect through Mount button to transfer files)
does anyone meet this problem ? and know how to fix this ?
thanks all.
Click to expand...
Click to collapse
Does the USB Connection type notification appear in the status bar?
ya7hu said:
Does the USB Connection type notification appear in the status bar?
Click to expand...
Click to collapse
no bro, it doesnt show any notification , it just show the LED light of charging through usb cable.
first time after flashing it still have notification shown to choose charging or change other methods: mtp / ptp / ....
then after i'd installed all apps & reboot phone to finish recover apps from Store, this problem shown up
bakhiem91 said:
no bro, it doesnt show any notification , it just show the LED light of charging through usb cable.
first time after flashing it still have notification shown to choose charging or change other methods: mtp / ptp / ....
then after i'd installed all apps & reboot phone to finish recover apps from Store, this problem shown up
Click to expand...
Click to collapse
I see, have you tried clearing the cache of MTP Host from Apps in the System Settings. Also try disabling USB Debugging.
I have this same issue using LOS 15.1. The solution is to go into Developer Settings and enable MTP using the 'Select USB Configuration' option. Then when you plug in via cable you will get the notification as normal. The problem is you have to do this every reboot, otherwise it's the same situation all over again. No Notification on plugging in and no way for your PC to see the device as it defaults to Charging mode.
I have "select USB conf" set as default (charging) and never had this issue. My PC sees the device even if I don't change the mode, I just don't see any files then. What drivers are you using?
przemcio510 said:
I have "select USB conf" set as default (charging) and never had this issue. My PC sees the device even if I don't change the mode, I just don't see any files then. What drivers are you using?
Click to expand...
Click to collapse
I just installed the Official Oneplus drivers but it didn't help. I didn't think it would. The generic Windows 10 drivers were working fine with LOS 14.1. As you said, the PC does see the phone just fine, but not files until MTP is enabled.
It's the lack of a Notification when plugging in that's the problem. Without the Notification i can't switch from Charging to MTP mode. I've tried all Notification levels too. The only way to get the Notification to appear is to use the MTP setting in Dev Options, and then it works.. until next reboot.
Edit: Enabling 'USB Debugging' seems to be a working fix currently!
ya7hu said:
I see, have you tried clearing the cache of MTP Host from Apps in the System Settings. Also try disabling USB Debugging.
Click to expand...
Click to collapse
DirkGently said:
I just installed the Official Oneplus drivers but it didn't help. I didn't think it would. The generic Windows 10 drivers were working fine with LOS 14.1. As you said, the PC does see the phone just fine, but not files until MTP is enabled.
It's the lack of a Notification when plugging in that's the problem. Without the Notification i can't switch from Charging to MTP mode. I've tried all Notification levels too. The only way to get the Notification to appear is to use the MTP setting in Dev Options, and then it works.. until next reboot.
Edit: Enabling 'USB Debugging' seems to be a working fix currently!
Click to expand...
Click to collapse
Thanks you guys, i've tried, but it still doesnt work for me, even when i flashed back to OOS OpenBeta 23, this problem still remain the same
i'm so confused ...
bakhiem91 said:
Thanks you guys, i've tried, but it still doesnt work for me, even when i flashed back to OOS OpenBeta 23, this problem still remain the same
i'm so confused ...
Click to expand...
Click to collapse
I spoke too soon about USB Debugging working. It doesn't help across reboots. Gonna Clean Install now. Hope you find a fix.
Clean install didn't help me. Just Google 'Oreo no mtp' to see how common this is.
I have a Nexus 5X on Oreo that doesn't have this problem. Other N5X owners do have it. It's totally random.
Good news everyone...
A fix is coming:
https://review.lineageos.org/#/c/209834/
At least for LOS 15.1 and any other ROMs based upon it.
@bakhiem91
Related
Hi everyone. I have searched the forums with no luck. I have a I9000 that has a shattered screen and as a result there is no image on the screen nor will touch work at all....I know, big surprise right? My goal is to get the data off of the phone. The phone is booting as I can hear the sounds and responds to Doanload/Recovery Mode commands etc. Before I would plug it into PC via USB and I would have to select one of three options on how the USB should behave. One of those options would enable Kies to access the phone. Because the screen is damaged, how can I force the phone to connect with Kies, or the computer for that matter?
All help is greatly appreciated.
Chris
hi, it will depend on what the usb is set to, if you switch the phone on and connect to the PC you should be able to use it as an external disk. If not start Kies then connect and it should connect, then you can recover your files
slow--welder59 said:
hi, it will depend on what the usb is set to, if you switch the phone on and connect to the PC you should be able to use it as an external disk. If not start Kies then connect and it should connect, then you can recover your files
Click to expand...
Click to collapse
Hi thanks for the reply. Kies actually doesn't recognize the phone and suggests that I turn on Developer Mode (if I remember correctly).
I read of a way to recover the data by activating the Recovery Mode and plugging in to USB. The issue there is I would almost need screenshots of the menus to try and navigate through and mount the device since the screen is unusable.
thejacl said:
Hi thanks for the reply. Kies actually doesn't recognize the phone and suggests that I turn on Developer Mode (if I remember correctly).
I read of a way to recover the data by activating the Recovery Mode and plugging in to USB. The issue there is I would almost need screenshots of the menus to try and navigate through and mount the device since the screen is unusable.
Click to expand...
Click to collapse
Strange experience, you can also try some of these options:
(i) Can use the TV out cable so that the screen is displayed on an external display [Use the 3.5mm TV out cable, even Nokia TV out cable works]
(ii) For using recovery, you should know the cwm/kernal that was installed, as the menu options vary? if not, what last ROM version you had installed, this may also help you get the exact recovery menu options.
gopalasubramanium said:
Strange experience, you can also try some of these options:
(i) Can use the TV out cable so that the screen is displayed on an external display [Use the 3.5mm TV out cable, even Nokia TV out cable works]
(ii) For using recovery, you should know the cwm/kernal that was installed, as the menu options vary? if not, what last ROM version you had installed, this may also help you get the exact recovery menu options.
Click to expand...
Click to collapse
I will try that with a 3.5mm to RCA that I have from a digital camera and see if that works. I have never rooted the phone so it's stock and whatever the latest Android version for that phone is. I THINK its 2.3.1 but not sure.
Hello I have galaxy s1 i9000 and a few months back I rooted it and installed CM10, everything is working fine but just recently I found out that the USB cable is no longer working for data transfer.
Whenever I plug the phone with a computer it just charge (I use the original data cable I got with the device).
On win7 it tells me there is a usb device connected but it fails to install a driver for it, note here that I have used the phone in the same computer before rooting to CM10. I downloaded and reinstaled the samsung driver but nothing changed.
I tried it in my macook as well, OSX 10.9 no love there either, while it worked before the rooting too.
I tried other cables that I confirmed they work with other phones but still no luck.
Any idea on what to do? It is really a pain to move photos from the phone to my pc by sending them with email...
Thanks
@nitro912gr
Did you enable USB storage on your phone after connected?
Scroll down upper left screen part, (where the Cid's head is watching and says "USB debugging connected")
tetakpatak said:
@nitro912gr
Did you enable USB storage on your phone after connected?
Scroll down upper left screen part, (where the Cid's head is watching and says "USB debugging connected")
Click to expand...
Click to collapse
I;m not sure about where you tell me to go, but I think this is about the USB debugging option?
I have USB debugging enabled in developers options but nothing happens, as a side note if I check in networking options for USB tethering it says USB is not connected.
Also I have changed in storage->USB computer connection to mass storage, MTP and PTP but nothing make any of my computers to see the device.
nitro912gr said:
I;m not sure about where you tell me to go, but I think this is about the USB debugging option?
Click to expand...
Click to collapse
Look the attachments.
Can't you enable it so? Scroll down upper left corner of the home screen and it should appear: "Touch to copy files from/to...."
If you click that, second menu appears and you turn it on by clicking on the bottom filed.
tetakpatak said:
Look the attachments.
Can't you enable it so? Scroll down upper left corner of the home screen and it should appear: "Touch to copy files from/to...."
If you click that, second menu appears and you turn it on by clicking on the bottom filed.
Click to expand...
Click to collapse
Hello again, no I don't even get the "usb connected" I plug it in and it just start charging, nothing else.
nitro912gr said:
Hello again, no I don't even get the "usb connected" I plug it in and it just start charging, nothing else.
Click to expand...
Click to collapse
Strange....
Maybe try another USB cable, is it still original one that you use now?
tetakpatak said:
Strange....
Maybe try another USB cable, is it still original one that you use now?
Click to expand...
Click to collapse
Yes this is the original and I tried 2 other USB cables, all confirmed to be working with other android phones, as I said this started after the root and the CM 10 installation maybe something is broken deeper than I can go.
Anyway thanks for your time, for the time being the only way I have found to backup my pictures is from kies air, I guess the only option is to try some factory reset sometime.
nitro912gr said:
Yes this is the original and I tried 2 other USB cables, all confirmed to be working with other android phones, as I said this started after the root and the CM 10 installation maybe something is broken deeper than I can go.
Anyway thanks for your time, for the time being the only way I have found to backup my pictures is from kies air, I guess the only option is to try some factory reset sometime.
Click to expand...
Click to collapse
Try to connect to another USB port, sometimes it helps.
Do you use pawitp's CyanogenMod build or is it modified?
Otherwise, as you have root you can also use app "Samba filesharing" and transfer your files from the phone to the PC via Wi-Fi
tetakpatak said:
Try to connect to another USB port, sometimes it helps.
Do you use pawitp's CyanogenMod build or is it modified?
Otherwise, as you have root you can also use app "Samba filesharing" and transfer your files from the phone to the PC via Wi-Fi
Click to expand...
Click to collapse
I think I got the build directly from cm site, I tried a second pc today still no luck, I used kies and moved the files.
Thanks and best wishes for the new year
nitro912gr said:
I think I got the build directly from cm site, I tried a second pc today still no luck, I used kies and moved the files.
Thanks and best wishes for the new year
Click to expand...
Click to collapse
Thanks mate, for you too (oh, I see it's your very first "thanks" credit from me )
BTW, yes- it is pawitp's build then, it is the great developer for the i9000
As soon as you use Kies, you have ceirtanly installed USB driver already. Try to kill Kies process in task manager next time. It must work!
Just want to add a close to this thread.
After all this time I got myself a newer LG L90 405n, so I decided to wipe clean the galaxy s1 and use it as a media player.
To my surprise now the data cable works like no problem.
I guess it was just some corrupted file after all
nitro912gr said:
Just want to add a close to this thread.
After all this time I got myself a newer LG L90 405n, so I decided to wipe clean the galaxy s1 and use it as a media player.
To my surprise now the data cable works like no problem.
I guess it was just some corrupted file after all
Click to expand...
Click to collapse
Cool
tetakpatalked from 1+One
Hi
I just installed a custom lolipop 5.02 using cyanogenmod CM 12 using ODIN to my galaxy s3 mini. and everything went will
after that i tried to connect my s3 to my PC it installs the drivers and it appears in the Device Manager but it does not appear in my computer and it wont connect to kies.
I tried to enable Debugging mode and the same, i tried to change the connection type,
i went to *settings* then *storage* the from the menu i chose *USB computer connection*, once i chose PTP or MTP it gives me this error "unfortunately, settings has stopped".
It is MTP checked by default although.
this happens even without debugging enabled.
How can i get my device connects to my PC? i need to transfer data.
Thanks
loai.zabin said:
Hi
I just installed a custom lolipop 5.02 using cyanogenmod CM 12 using ODIN to my galaxy s3 mini. and everything went will
after that i tried to connect my s3 to my PC it installs the drivers and it appears in the Device Manager but it does not appear in my computer and it wont connect to kies.
I tried to enable Debugging mode and the same, i tried to change the connection type,
i went to *settings* then *storage* the from the menu i chose *USB computer connection*, once i chose PTP or MTP it gives me this error "unfortunately, settings has stopped".
It is MTP checked by default although.
this happens even without debugging enabled.
How can i get my device connects to my PC? i need to transfer data.
Thanks
Click to expand...
Click to collapse
its a known bug for cm12. novafusion workin on it. you can use twrp's mtp to transfer files.
factorexh said:
its a known bug for cm12. novafusion workin on it. you can use twrp's mtp to transfer files.
Click to expand...
Click to collapse
So how could i transfer data until the fix comes ?
is there anyway to do that ?
Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???
loai.zabin said:
Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???
Click to expand...
Click to collapse
Only if you have TWRP 2.8.0.0 or higher :
1. Boot to TWRP recovery
2. Navigate to "Mount" and enable "enable MTP"
3. Connect your device to your PC
Now you can transfer files between your phone and PC
loai.zabin said:
Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???
Click to expand...
Click to collapse
I had a similar thing happen to me after an update and was forced to do a factory restore. That's why it's always good to save stuff to your removable storage; makes it much easier to transfer/salvage data when something goes wrong.
Hello everyone,
Yesterday I installed CM13 and it is very good. I haven't found any problem as of now in my phone but I am getting BSOD everytime when I connect the mobile to my PC through USB. I tried everything from changing the cord to changing the usb port, even uninstalled LG drivers but still getting BSOD.
Can anyone help me to understand and solve this. Right now my only option is to take SD card out and connect it using Card Reader. Phone is working smoothly. No issues so far. Its just this problem is bugging me. Appreciate if you guys can help me out. Thank You.
Okay so I am getting BSOD only when I am enabling the USB Debugging. By disabling USB Debugging I am able to connect the phone to PC but it is only in the charging mode. I am not able to access any files. It is showing blank. So what should I do now?
kernel.debugger said:
Okay so I am getting BSOD only when I am enabling the USB Debugging. By disabling USB Debugging I am able to connect the phone to PC but it is only in the charging mode. I am not able to access any files. It is showing blank. So what should I do now?
Click to expand...
Click to collapse
1st: The USB Debugging problem only occurs on Windows, Linux distros are fine
2nd:Just pull out the status bar and click on the charging one. You'll be given 3 options: charging, MTP and PTP. (Sorry if I misspelled the names, it's been a long time since I've done this)
Hyoretsu said:
1st: The USB Debugging problem only occurs on Windows, Linux distros are fine
2nd:Just pull out the status bar and click on the charging one. You'll be given 3 options: charging, MTP and PTP. (Sorry if I misspelled the names, it's been a long time since I've done this)
Click to expand...
Click to collapse
Thank You. I can now access the files.
Yes I am on Windows 10. USB Debugging BSOD is still an issue. So is it okay to keep USB debugging off? I always keep that option enabled cause I thought its an important option if you happen to brick the device. So what is the solution? is this happening for everyone who are on custom rom?
Thanks once again.
kernel.debugger said:
Thank You. I can now access the files.
Yes I am on Windows 10. USB Debugging BSOD is still an issue. So is it okay to keep USB debugging off? I always keep that option enabled cause I thought its an important option if you happen to brick the device. So what is the solution? is this happening for everyone who are on custom rom?
Thanks once again.
Click to expand...
Click to collapse
It's okay to leave it off. If you happen to brick your device, it won't boot, meaning no USB debugging.
Hyoretsu said:
It's okay to leave it off. If you happen to brick your device, it won't boot, meaning no USB debugging.
Click to expand...
Click to collapse
Yes, Never bricked the device Thanks to XDA members who are always there to help novice like me from every situation. Thank You.
Someone post answer in cm13 thread - some issues with drivers from LG with cm roms compilations or something like that. Just UNINSTAL driver from PC and u good to go connect l90 via MTP
You mast UNINSTALL driver from PC and reboot PC.
Then install this drivers and reboot PC:
https://yadi.sk/d/8iKJQLio33FusS
L90 with 5.0.2 stok ROM or CM13 works correctly.
uns8816 said:
You mast UNINSTALL driver from PC and reboot PC.
Then install this drivers and reboot PC:
https://yadi.sk/d/8iKJQLio33FusS
L90 with 5.0.2 stok ROM or CM13 works correctly.
Click to expand...
Click to collapse
so with these drivers no BSOD when u put phone via mtp connection ?
EDIT: i test this so with drivers 4.0.4 there IS NO BSOD in Windows 7
So basically I searched everywhere and found many people with this issue.
I tried everything everyone said.
From installing the drivers, to turning on developer mode.
Also fastboot mode is not working.
I hope my is not a hardware issue. I tried a new cable with the same results.
Anything else I can try?
I have been using FTP to transfer files but I want to root my phone and I can't.
MagilsugaM said:
So basically I searched everywhere and found many people with this issue.
I tried everything everyone said.
From installing the drivers, to turning on developer mode.
Also fastboot mode is not working.
I hope my is not a hardware issue. I tried a new cable with the same results.
Anything else I can try?
I have been using FTP to transfer files but I want to root my phone and I can't.
Click to expand...
Click to collapse
Did you enable USB debugging in Developer mode?
Sent from my OnePlus 3T using XDA Labs
BillGoss said:
Did you enable USB debugging in Developer mode?
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Yes, that didn't help either
MagilsugaM said:
Yes, that didn't help either
Click to expand...
Click to collapse
The last time I read about someone having a similar problem it was resolved by using an original cable. But I can't find the thread where this was discussed.
Sent from my OnePlus 3T using XDA Labs
Just to rule it out, after you connect your cable are you seeing the Notification with USB options and have you selected 'Data Transfer', (or whatever it's called)?
If you are seeing the Notification and the PC still can't see the device, uninstall whatever Drivers and ADB packages you currently have installed. Download the ADB package from Google and, when prompted, say 'yes' to installing the Drivers.
Make sure you try all your available USB ports.
Are there any Yellow exclaimation marks in Device Manager? Do you have the most recent Motherboard drivers from your Manufacturers website?
Dirk said:
Just to rule it out, after you connect your cable are you seeing the Notification with USB options and have you selected 'Data Transfer', (or whatever it's called)?
If you are seeing the Notification and the PC still can't see the device, uninstall whatever Drivers and ADB packages you currently have installed. Download the ADB package from Google and, when prompted, say 'yes' to installing the Drivers.
Make sure you try all your available USB ports.
Are there any Yellow exclaimation marks in Device Manager? Do you have the most recent Motherboard drivers from your Manufacturers website?
Click to expand...
Click to collapse
Yes, I updated the drivers too.
I tried uninstalling the google drivers and everything you mentioned.
No the notification doesn't show up and my device doesn't show up on device manager.
I am running windows 10 latest update.
MagilsugaM said:
Yes, I updated the drivers too.
I tried uninstalling the google drivers and everything you mentioned.
No the notification doesn't show up and my device doesn't show up on device manager.
I am running windows 10 latest update.
Click to expand...
Click to collapse
If you have a can of compressed air, try blowing out the USB port. There may be debris up there. It does sound like a Hardware problem. You really need to try it on another PC to know for sure.
You don't have any issues when charging?
Dirk said:
If you have a can of compressed air, try blowing out the USB port. There may be debris up there. It does sound like a Hardware problem. You really need to try it on another PC to know for sure.
You don't have any issues when charging?
Click to expand...
Click to collapse
The phones charges perfectly, I already cleaned out the port.
So, I still have this issue and I wasn't able to solve it. Pretty much the phone only charges, doesn't get recognized by any computer. I also tried my laptop and same thing happens. How do I find out if it's a hardware issue?
Is there any way to save the phone?
i got this too , stuck in recovery and fastboot because i cant connect my device in any pc
MagilsugaM said:
So, I still have this issue and I wasn't able to solve it. Pretty much the phone only charges, doesn't get recognized by any computer. I also tried my laptop and same thing happens. How do I find out if it's a hardware issue?
Is there any way to save the phone?
Click to expand...
Click to collapse
You can connect your PC to your phone without cables using ADB over wifi provided your phone is rooted and on the same wifi network as your PC.
I know this won't solve your hardware problem but it does allow you to move files between your PC and your phone using ADB.
Note that this doesn't work in recovery or fastboot modes.
Here's how:
On the phone using Terminal
su
setprop service.adb.tcp.port 5555
stop adbd
start adbd
On the PC in a command terminal
adb connect xxx.xxx.xxx.xxx:5555
...
adb disconnect xxx.xxx.xxx.xxx:5555
where xxx.xxx.xxx.xxx is the phone's IP address
To set the phone back to normal (optional)
On the phone
su
setprop service.adb.tcp.port -1
stop adbd
start adbd
Sent from my OnePlus 3T using XDA Labs
I fix using a old PC that a have connected and installed drivers before but was a windows 7 , I delet all drivers content about phones and USB and re installed again using the unbrick tools and drivers , plugged the phone in fastboot and magically was recognized again ..
MagilsugaM said:
So, I still have this issue and I wasn't able to solve it. Pretty much the phone only charges, doesn't get recognized by any computer. I also tried my laptop and same thing happens. How do I find out if it's a hardware issue?
Is there any way to save the phone?
Click to expand...
Click to collapse
You could also try using flash drive via OTG. This won't help you connect to PC/Laptop in any way, but could at least progress a bit that the phone hardware is okay for data part.
This problem start again , fortunelly im in nougat so if i go to dev options and change the usb charging to mtp his comes to charging again . I think this is the problem , the phone dont comes to mtp so dont "have" a device in windows to connect , with this im unable to make root and do anything in fastboot because my phone lock to usb only for charge