Hello all,
I rooted my teclast x98 plus 2 (c2e3 android only) and everything was perfect. I installed boot animations app and installed a new boot animation. After installling I am get to the animation and it stops and boots again. I did make a backup in twrp but here is my issue. I can hold down the power button and volume down to get to the recovery selector but my power button is unresponsive to select anything. It works to power off and on the tablet though. My options are recovery selector , bios and fast boot dnx. I tried reflashing the official firmware with phone flash tool but fails at 4%. I can also select efi shell ( any commands to recover from there?) any help is so appreciated.
Same problem 100%
But i am with the original files. Didnt flash anything.
Stuck on the boot animition...
Related
Hello,
After rooting my p880, my phone hangs at boot. Just after the boot sound (*pling* ) the phone is hanging. The boot image is still moving.
Things I tried already:
I followed this thread http://forum.xda-developers.com/showthread.php?t=2069723, which tells to do a kdz update. This is not working, as I am not able to get to the S/W upgrade screen. Instead, when I start the phone using the power button + volume down, i get the Android system recovery menu (3e).
I tried to upload a new (cyanogenmod) rom using adb sideload, but that didn't work, as the file I used was damaged (I will retry with new file).
I also did a factory reset and a cache wipe.
Can someone tell me what is best to do?
Kind regards
X-cal
x-calibur1978 said:
Hello,
After rooting my p880, my phone hangs at boot. Just after the boot sound (*pling* ) the phone is hanging. The boot image is still moving.
Things I tried already:
I followed this thread http://forum.xda-developers.com/showthread.php?t=2069723, which tells to do a kdz update. This is not working, as I am not able to get to the S/W upgrade screen. Instead, when I start the phone using the power button + volume down, i get the Android system recovery menu (3e).
I tried to upload a new (cyanogenmod) rom using adb sideload, but that didn't work, as the file I used was damaged (I will retry with new file).
I also did a factory reset and a cache wipe.
Can someone tell me what is best to do?
Kind regards
X-cal
Click to expand...
Click to collapse
you're entering s/w mode wrong. dont press power button. just hold vol down and plug in usb
OOOhhhh noooosss....... That's kind of stupid .
Thanks!
Hello people,
I have an issue with my Phone (i9305) which came to exist doing a factory reset in the normal settings menu (not in recovery).
I rebooted in TWRP recovery, but it's stuck in boot (screen flashes "TEAMWIN" screen over and over)
I wanted to redo the TWRP using Odin3, but it doesn't reconize the phone.
I did find a helpfull post here http://forum.xda-developers.com/showthread.php?t=1974160&page=3 (top post, #21), but the boot with dubbel volume buttons doesn't do anything different for me (other device thing maybe, or what buttons do I all need to press, when to release??).
Does anyone have any suggestions on how I can get TWRP running normally again so I am not stuck with a brick?
Any help will be appreciated!
Hi i have lost my windows boot.
I can used the power and audio+ button to give me the dual boot screen, There i only have the option to choose android (windows logo is missing).
I can Hold the Power and Vol- and boot in to droidboot and in to Andriod recovery.
I can boot in to Android and Press Boot to Windows Tablet will shut down & reboot but will not load windows.
Any Help Please.
Paul
I'm having the same issue. I looked in the bios and it shows one boot option priority, which is set to UEFI OS and cannot be changed. Going to try using a different usb stick now I think, just incase it's that!
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Timing is the key
Set your finger on position where you gonna restart the device.
Hold power + vol down
After the screen restart switch soon as possible you finger to set to recovery by
Hold vol up + down + insert the USB C cable
Remember timing is the key. I have done this for several tabs that screw on my home so you are welcome bro
frontchasack said:
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Click to expand...
Click to collapse
Original firmware I used to fix my sm-t510
Account Suspended
flavarasa said:
Timing is the key
Set your finger on position where you gonna restart the device.
Hold power + vol down
After the screen restart switch soon as possible you finger to set to recovery by
Hold vol up + down + insert the USB C cable
Remember timing is the key. I have done this for several tabs that screw on my home so you are welcome bro
Click to expand...
Click to collapse
I think "restarts" may be confusing. Switch from down to up as soon as the screen turns off.
frontchasack said:
Hey guys,
So I'm having issues trying to fix my Samsung Tab A 10.1 ( SM-T510 ).
At first I was trying to install a custom TWRP recovery image, and I had a boot loop where it kept getting stuck at the SAMSUNG splash screen(not the initial samsung boot screen that shows TAB A 10.1). I however overcame that issue by factory reseting and through some additional tinkering.
Now the part I'm starting to regret.
I tried once again to flash the custom TWRP to the tablet, but this time I forgot to tick the "autoreboot" setting off.
So ODIN shows a PASS for the flash, but now when the tablet boots its stuck in the following boot sequence:
START:
Initial Samsung boot screen asking to press power button to continue due to unknown boot image source etc
PRESS POWER
SAME INITIAL SAMSUNG BOOT SCREEN minus the power button prompt, lasts for about 3-5 seconds
REBOOT
Now I have managed to get into download mode with the tablet connected to a computer.
I CANNOT get into recovery mode to factory reset the tablet, which was the solution the last go around.
I am starting to think that the only way I am going to get the tablet back in original working order, or any working order for that matter is to:
A: LOCATE original firmware for my device, I believe it is GTAXLWIFI firmware for my device. However the files I have found don't seem to be accepted in ODIN...
B: Try to continue on with the TWRP process, which I have tried to reflash the TWRP recovery that I have, and it shows pass. But, the issue persists.
Any suggestions or help would be amazing!
Thanks!
Click to expand...
Click to collapse
You can use frija.exe to get the latest stock firmware. To get TWRP you MUST boot to recovery before system. If you allow the tablet to boot to system first, it will overwrite TWRP with the stock recovery. Do this by pressing vol down and power till the screen turns off. As soon as it does, switch from vol down to up while still pressing power and keep holding both till the red warning message appears. You also need to leave the cable attached to the PC while doing this.
Hi, yesterday my phone goes into boot loop suddenly. By then I still could access recovery mode. I tried to wipe cache and reboot, but it's still stuck in boot loop.
So I flashed original firmware in order to fixed the boot loop ( I've never installed custom rom) and it says succeeded in Odin then the phone restarted, but stuck in Galaxy Note logo. I manually restart the phone and it goes to "Installing System Update" but there are no progress and the animation didn't move. I left it for about half hour and then manually restart again and still stuck in Galaxy Note logo.
By this time, I couldn't access recovery anymore. Pressing vol up + bixby + power do nothing. I could access download mode just fine.
Any suggestion on how to fix my phone ? I'm still in original firmware and have not enabled debugging mode in developer settings
Post a screenshot in recovery mode after reset factory