I had finally been able to unbrick my phone using the guide on the forums.
So I decided to update to the latest oxygen OS, I downloaded it, hit install, then got a message saying that installation failed. So I hit reboot, and when it rebooted, a screen comes up that says "Decryption Unsuccessful. Your phone storage has been damaged, please download the firmware package to brush"
Now I am totally lost. I can't seem to find my phone on my computer either. Any help would be appreciated.
Use the Root Toolkit in the development section. From there you can choose the option to Force Decryption! I was.in your shoes a couple of weeks ago. I've stayed away from flashing roms for now at least. This should fix you phone and give you access to.your internal memory
luisangel89 said:
Use the Root Toolkit in the development section. From there you can choose the option to Force Decryption! I was.in your shoes a couple of weeks ago. I've stayed away from flashing roms for now at least. This should fix you phone and give you access to.your SD card.
Click to expand...
Click to collapse
If this works, I will love you forever
luisangel89 said:
Use the Root Toolkit in the development section. From there you can choose the option to Force Decryption! I was.in your shoes a couple of weeks ago. I've stayed away from flashing roms for now at least. This should fix you phone and give you access to.your internal memory
Click to expand...
Click to collapse
How did you get your computer to see your phone?? I get "error: no device/emulators found" "<waiting for any device>"
You have to be in fastboot mode. Reboot your phone and using the volume up choose reboot to fastboot. Did you enable usb debugging in the develeoper settings in your phone?
luisangel89 said:
You have to be in fastboot mode. Reboot your phone and using the volume up choose reboot to fastboot. Did you enable usb debugging in the develeoper settings in your phone?
Click to expand...
Click to collapse
It has been enabled before but if you were in the same situation as I was before then you know that I am unable to change that setting now.
peterb37 said:
It has been enabled before but if you were in the same situation as I was before then you know that I am unable to change that setting now.
Click to expand...
Click to collapse
OK you can still Force decrypt though. Have you tried it in fastboot mode?
luisangel89 said:
OK you can still Force decrypt though. Have you tried it in fastboot mode?
Click to expand...
Click to collapse
I just get
"Error: no devices/emulators found
target reported max download size of 442499072 bytes
erasing 'userdata' ...
FAILED <remote: Partition erase is not allowed>
finished. total time: 0.011s"
peterb37 said:
I just get
"Error: no devices/emulators found
target reported max download size of 442499072 bytes
erasing 'userdata' ...
FAILED <remote: Partition erase is not allowed>
finished. total time: 0.011s"
Click to expand...
Click to collapse
Did you reboot?
luisangel89 said:
Did you reboot?
Click to expand...
Click to collapse
Yes and I get the same screen as before
Related
So like a moron I installed ViperRom 5.0 with regular old CWM. Now as a result I'm stuck at the bootloader with no access to recovery.
I have no idea what to do now. PLEASE HELP!!!!
S-ON
Hboot 1.55.0000
Can you not boot into recovery from the boot loader or reboot and hold the volume down button?
Sent from my HTC One Max using Tapatalk!
gimmeitorilltell said:
Can you not boot into recovery from the boot loader or reboot and hold the volume down button?
Sent from my HTC One Max using Tapatalk!
Click to expand...
Click to collapse
I only have access to my bootloader......can't get into recovery or boot into the rom.
My terminal window keeps hanging on "waiting for device" so I don't think USB Debugging was enabled.....
The only thing that is looking bright is that my computer is recognizing my phone in Fastboot.
I'm completely clueless on what to do now.....
Please anyone help
Maybe try flashing recovery again?
Sent from my HTC One Max using Tapatalk!
Does it say fastbootusb? If not press the power button to select fastboot.
BD619 said:
Does it say fastbootusb? If not press the power button to select fastboot.
Click to expand...
Click to collapse
I can get to fastboot USB but from there I'm honestly lost...
nickhernandez said:
I can get to fastboot USB but from there I'm honestly lost...
Click to expand...
Click to collapse
I can help you remotely PM if interested
i'm in the same boat, but when I go to flash another recovery in fastboot my phone freezes after it fails to flash.
sending 'recovery' (9786 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 0.016s
Then my phone freezes and I have to reboot into bootloader.
Never mind solved it.
Morghan said:
i'm in the same boat, but when I go to flash another recovery in fastboot my phone freezes after it fails to flash.
sending 'recovery' (9786 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 0.016s
Then my phone freezes and I have to reboot into bootloader.
Click to expand...
Click to collapse
I had to run RUU to fix mine
My bootloader is unlocked already, I deleted HTC Sync, debugging on, usb is in disk mode, etc. but for the life of me I can't get any recoveries to flash. I get the "Remote: not allowed" and if I try again it just gets stuck on sending recovery. It shows up as a fastboot device in cmd. Any suggestions?
Try the tool kit in development.
redmanjoey said:
My bootloader is unlocked already, I deleted HTC Sync, debugging on, usb is in disk mode, etc. but for the life of me I can't get any recoveries to flash. I get the "Remote: not allowed" and if I try again it just gets stuck on sending recovery. It shows up as a fastboot device in cmd. Any suggestions?
Click to expand...
Click to collapse
redmanjoey said:
My bootloader is unlocked already, I deleted HTC Sync, debugging on, usb is in disk mode, etc. but for the life of me I can't get any recoveries to flash. I get the "Remote: not allowed" and if I try again it just gets stuck on sending recovery. It shows up as a fastboot device in cmd. Any suggestions?
Click to expand...
Click to collapse
Are you in bootloader/fastbootusb?
BD619 said:
Are you in bootloader/fastbootusb?
Click to expand...
Click to collapse
Yes, I am in fastbootusb. The same thing happens on the toolkit. I doubt it is any kind of hardware defect, but the device is recognized in fastboot which is why I am SUPER confused. This is the first time I have ever run into an issue with fastboot.
redmanjoey said:
Yes, I am in fastbootusb. The same thing happens on the toolkit. I doubt it is any kind of hardware defect, but the device is recognized in fastboot which is why I am SUPER confused. This is the first time I have ever run into an issue with fastboot.
Click to expand...
Click to collapse
I initially had a bad download and had issues with both ways to flash. Redownloaded and it worked.
Also, with the tool I've had issues with usb switching from storage to media which affected even using adb to push files. Make sure that's not an issue with the push method.
Sent from M8 on XDA Premium APP
joshuaw84 said:
I initially had a bad download and had issues with both ways to flash. Redownloaded and it worked.
Also, with the tool I've had issues with usb switching from storage to media which affected even using adb to push files. Make sure that's not an issue with the push method.
Sent from M8 on XDA Premium APP
Click to expand...
Click to collapse
Are you implying the fastboot download was bad or the recovery? I tried three different recoveries now and none worked. I also tried using hassoon2000s method and just get an error saying device not found.
Also, I am using the fastboot file that came directly from HTC so I am really scratching my head right now...
redmanjoey said:
Also, I am using the fastboot file that came directly from HTC so I am really scratching my head right now...
Click to expand...
Click to collapse
It could be outdated.
Do you have android sdk on your PC?
If so make sure it's up to date.
If not get it HERE
redmanjoey said:
Are you implying the fastboot download was bad or the recovery? I tried three different recoveries now and none worked. I also tried using hassoon2000s method and just get an error saying device not found.
Click to expand...
Click to collapse
Just giving you my experience where there were a couple issues that made it seem like I was stuck. Take it or leave it I guess.
Sent from M8 on XDA Premium APP
joshuaw84 said:
Just giving you my experience where there were a couple issues that made it seem like I was stuck. Take it or leave it I guess.
Sent from M8 on XDA Premium APP
Click to expand...
Click to collapse
Sorry if I sounded mean or anything I was literally just asking which one you meant lol. I now realize "are you implying" does sound kinda snarky. Anyway, it must have been something with my computer because I did it on another computer and got it to work.
So the thread doesn't go to waste, if anyone is having issues try on another computer.
Okay, now trying to flash the stock recovery to get the phone exchanged for radio issues, I am running into the same problem. I tried both computers now. Hopefully I figure it out soon, had to activate an old blackberry for the time being.
"sending 'recovery' (16472 KB)...
FAILED (remote: not allowed)
finished. total time: 0.007s"
I have had the same problem before on a different phone. All you need to do is put it on the sd card and use the boot loader method. The phone will automatically find it and flash it. Then just remove sd card and delete file so it doesn't keep prompting to flash it every time you reboot.
{ParanoiA} said:
I have had the same problem before on a different phone. All you need to do is put it on the sd card and use the boot loader method. The phone will automatically find it and flash it. Then just remove sd card and delete file so it doesn't keep prompting to flash it every time you reboot.
Click to expand...
Click to collapse
To flash a recovery? Just rename the recovery as a radio file?
Yes. Go to http://forum.xda-developers.com/showthread.php?t=2696652 and all the info you need is there along with directions.
Hello, everyone.
So, about an week ago, I posted a thread to ask for your help regarding my broken N6. Since then, nothing has changed(but got worse, I guess...?). Here is what is happening with my N6 right now.
1) It powers up(thank god) but goes straight to the boot-loader screen(I believe this means that my device doesn't have system image file within the device)
2) On boot-loader menu(Start, Restart bootloader, Recovery mode, Power off, Factory, Barcodes, BP Tools, QCOM, Bootlaoder logs), only few are working(Restart bootlodaer, Power off, Barcodes). When I try to perform other than these, it just goes back to main boot-loader screen.
3) I tried to use both Nexus Root Tool kit and manual installation of each image but doesn't work for both of them(From this, I believe that my phone is just BROKEN)
With this happening, conclusion that I can think of is
1) There is no 'Recovery' available in my device(that's why I can't do anything to recover my device)
2) ADB is not functioning.
Only solution that I can think of from this point is that contact Motorola and replace my device(which is what I am currently doing but Motorola has huge problem with their customer service that I am waiting for their answer for about 2 weeks now)
If possible, would there other options that I can repair this device by myself?
I appreciate your attention.
Sincerely.
Adb has no impact on bootloader. What do you mean doesn't work when you fastboot the factory image?
Sent from my Nexus 6 using XDA Free mobile app
your problem is the use of toolkits. stay away from them, unless you know what you are doing!
your phone doesnt have any rom on it. you can.. 1. flash the factory img via fastboot, like you are supposed to do(not via a toolkit), or 2. unlock the bootloader, flash a custom recovery then while in the custom recovery adb push a rom, gapps, and supersu and flash them that way. what you did does not give you the right for a trade in.
The two previous posters are correct. You just need to fastboot flash the factory rom and factory recovery. It is fairly simple, if you take the time to read how to do it. There are posts all over XDA for beginners on how to do this. And I cannot stress how correct @simms22 is. Toolkits may seem to make things easy, but when there is a problem, you need to know how to manually fix it. I just personally stay away from toolkits. And I was in your shoes. I didn't know jack about flashing roms and such. Just reading XDA got me to where I am. (and i am still learning!)
Like the others have pointed out, you are fine. You have access to your bootloader screen, this is a Nexus. Take a deep breath. Take some time and read this site about flashing a factory image. Please do it the best way - manually with fastboot commands. If you get stuck come back here and someone will help. It really is easy. Please repeat after me "I will avoid all toolkits from now one".
Start with this and read lots.
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Flashing the factory image should still work from boot loader with fast boot.
Follow the second link for manual flashing after downloading the zip from the first link.
https://developers.google.com/android/nexus/images
If you run into the missing system.img problem here is the link to fix it:
http://www.androidpolice.com/2014/11/12/running-into-the-dreaded-missing-system-img-error-flashing-android-5-0-factory-images-heres-how-to-get-around-it/
This way you can start from the beginning.
Problem with flashing factory image manually.
First, thanks everyone for helping me by providing useful information but there is a problem when I flash factory image manually.
Whenever I try to flash image(for example, 'boot.img', or other images, I always get the same error 'FAILED <remote failure>' and not installed on my device. From here, I have no idea what to do.
chg911225 said:
First, thanks everyone for helping me by providing useful information but there is a problem when I flash factory image manually.
Whenever I try to flash image(for example, 'boot.img', or other images, I always get the same error 'FAILED <remote failure>' and not installed on my device. From here, I have no idea what to do.
Click to expand...
Click to collapse
first off, does fastboot see your device?? you can check by typing.. fastboot devices
if it doesnt see your device, do you have the driver instslled?
simms22 said:
first off, does fastboot see your device?? you can check by typing.. fastboot devices
if it doesnt see your device, do you have the driver instslled?
Click to expand...
Click to collapse
fastboot detects my device. but when I tried to TWRP recovery, it shows following error.
sending 'recovery' <11668 KB>...
OKAY [ 0.375s]
writing 'recovery'...
<bootloader> Failed to erase partition
<bootloader> Failed to flash partition recovery
FAILED <remote failure>
finished. total. time: 6.133s
chg911225 said:
fastboot detects my device. but when I tried to TWRP recovery, it shows following error.
sending 'recovery' <11668 KB>...
OKAY [ 0.375s]
writing 'recovery'...
<bootloader> Failed to erase partition
<bootloader> Failed to flash partition recovery
FAILED <remote failure>
finished. total. time: 6.133s
Click to expand...
Click to collapse
look for the command to erase the recovery partition. youll have to google it as i dont know(or remember) it. i dont even own a computer :angel:
then youll have to reflash the recovery.
simms22 said:
look for the command to erase the recovery partition. youll have to google it as i dont know(or remember) it. i dont even own a computer :angel:
then youll have to reflash the recovery.
Click to expand...
Click to collapse
found the command "fastboot erase recovery" but not working with following error message.
fastboot erase recovery
erasing 'recovery'
<bootloader> Erase allowed in unlocked state
<bootloader> Failed to erase partition
FAILED <remote failure>
finished. total time: 5.763s
*my phone is unlocked for sure(I checked 'fastboot oem unlock' and it said
fastboot oem unlock
...
<bootloader> Device already unlocked!
FAILED<remote failure>
finished. total time: 0.003s
chg911225 said:
found the command "fastboot erase recovery" but not working with following error message.
fastboot erase recovery
erasing 'recovery'
<bootloader> Erase allowed in unlocked state
<bootloader> Failed to erase partition
FAILED <remote failure>
finished. total time: 5.763s
*my phone is unlocked for sure(I checked 'fastboot oem unlock' and it said
fastboot oem unlock
...
<bootloader> Device already unlocked!
FAILED<remote failure>
finished. total time: 0.003s
Click to expand...
Click to collapse
i have no idea, but this is a good thread to read and post questions about fastboot in http://forum.xda-developers.com/nexus-6/general/noob-read-adb-fastboot-how-help-t3006500
RIP. What did you do to your N6?
OP how did you install your fastboot. I would assume you did it from within a toolkit. That is probably your problem. If that is the case, please do this. Go here and install the .exe: http://developer.android.com/sdk/index.html#Other
It's big I know it but just do it please.
Make sure everything (SDK) gets installed in a folder path like c:\android or something you will easily remember. This is very important because it is within this folder you will place the extracted factory image files (.img). Place all full unzipped .img files in this folder.
Please follow method #2 in this excellent guide:
http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
zetsumeikuro said:
RIP. What did you do to your N6?
Click to expand...
Click to collapse
One day it just shut down by itself and since then it's like this. I just contact Motorola and they are going to ship me new device with different color(idk y they are still having problem with their stocking their devices in because what I had was Cloud White 32Gb but only model that were present when I contact them was Midnight blue with 32Gb, other options are all out of stock. really wished they had a white color...)
This phone is a damn Nexus, it can't die. It's user error.
Sent from my Nexus 6
Long time lurker first time poster, but I need help!!!
Getting tired of waiting for my OTA 7.11 and after a long night at work decided rather than just manually flashing the file that I would use the NRT. I must've encountered an error as it left me in Fastboot so I try to manually flash everything with it being stuck on the "Google" pre-boot screen. I try again with the version that I was on prior to update (NBD91X) and still the same results. Looking at the log from my Command Prompt I notice upon flashing the bootloader I have this error:
sending 'bootloader' (4071 KB)...
OKAY [ 0.219s]
writing 'bootloader'...
(bootloader) Motoboot: invalid GPT
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.408s
I am only able to boot into Fastboot and unable to boot into Recovery. What are my options to getting my N6 back?
Thank you all for the help.
Hi. Download last adb + fastboot executables here:
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Extract the files somewhere.
Download Google factory image and extract it in the same folder you have the fastboot executable.
Boot in bootloader "power + volume down" and follow this guide:
https://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
I always choose the second option (manually flashing all files).
Good luck..!
5.1 said:
Hi. Download last adb + fastboot executables here:
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Extract the files somewhere.
Download Google factory image and extract it in the same folder you have the fastboot executable.
Boot in bootloader "power + volume down" and follow this guide:
https://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
I always choose the second option (manually flashing all files).
Good luck..!
Click to expand...
Click to collapse
Thanks for your reply. Even after getting a fresh download of adb/fastboot files I'm still encountering this error when trying to flash the bootloader;
c:\Users\matt\Downloads\platform-tools>fastboot devices
ZX1G3249HB fastboot
c:\Users\matt\Downloads\platform-tools>fastboot flash bootloader C:\Users\matt\D
ownloads\platform-tools\shamu-n6f26r\bootloader-shamu-moto-apq8084-72.01.img
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:bootloader: not found
target reported max download size of 536870912 bytes
sending 'bootloader' (4071 KB)...
OKAY [ 0.134s]
writing 'bootloader'...
(bootloader) Motoboot: Preflash validation for aboot
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.433s
Any other suggestions?
bootloader is locked correct?
SynisterWolf said:
bootloader is locked correct?
Click to expand...
Click to collapse
The bootloader has been unlocked from the day I took it out of the box. I still have the little "unlocked" icon at the bottom of the "Google pre-boot" screen that it stays stuck at when I try to boot the phone.
Can you issue this command while in bootloader:
fastboot oem device-info
"Remote failure" sounds like as the bootloader is locked...
Also your problem sounds similar to this one:
https://forum.xda-developers.com/nexus-6/help/bricked-t3523844
I really don't know what you can do now sorry
5.1 said:
Can you issue this command while in bootloader:
fastboot oem device-info
"Remote failure" sounds like as the bootloader is locked...
Also your problem sounds similar to this one:
https://forum.xda-developers.com/nexus-6/help/bricked-t3523844
I really don't know what you can do now sorry
Click to expand...
Click to collapse
I just issued the command and got this back:
C:\Users\matt\Downloads\platform-tools>fastboot devices
ZX1G3249HB fastboot
C:\Users\matt\Downloads\platform-tools>fastboot oem device-info
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
(bootloader) 'device-info' is not a supported oem command
(bootloader) See 'fastboot oem help'
FAILED (remote failure)
finished. total time: 0.011s
I hope I'm not screwed like the thread you suggested. At this point if I could just get a fresh install I'd be happy with that. Otherwise I guess I could start looking for an N6 replacement...I've put my sim card in my old MotoX 2013 and boy is this phone smaller than I remember.
AGGHHHHH!!! Thanks for your help and please let me know if there is anything else you could suggest for me to try.
Try: fastboot getvar all
Paste the result. Just hide you imei...
5.1 said:
Try: fastboot getvar all
Click to expand...
Click to collapse
I'm not sure, but wasn't it possible to unbrick the n6 by flashing the 7.0 developer preview image????
coremania said:
I'm not sure, but wasn't it possible to unbrick the n6 by flashing the 7.0 developer preview image????
Click to expand...
Click to collapse
That's interesting. I'd be game for whatever weird ass technique there is to get it up and running.
the200sx said:
That's interesting. I'd be game for whatever weird ass technique there is to get it up and running.
Click to expand...
Click to collapse
But I can't find a download of any early preview, maybe a member here has made backup. If you get a copy, try to flash it step by step without inserted simcard
Edit: may najoor has the original file for you
https://forum.xda-developers.com/nexus-6/general/android-n-preview-2-npc91k-flashable-t3358335
coremania said:
But I can't find a download of any early preview, maybe a member here has made backup. If you get a copy, try to flash it step by step without inserted simcard
Edit: may najoor has the original file for you
https://forum.xda-developers.com/nexus-6/general/android-n-preview-2-npc91k-flashable-t3358335
Click to expand...
Click to collapse
I just read through the entire thread, while it sounds like method 2 would most likely be the option considering how I can't get into recovery, I wasn't able to find where anyone talked about it unbricking the phone. At this point I'm ready to try just about anything, but I had hoped there would be a method to keep data. It may have to wait until tomorrow so I can dedicate enough time to it. In the meantime, if anyone can point me into the direction of someone being stuck similarly to me and what they did to get out of it, I would be extremely grateful.
Thanks
Hmm... Could you just try to flash twrp?
https://dl.twrp.me/shamu/twrp-3.0.3-0-shamu.img
Place the file in fastboot folder open a cmd, cd in fastboot folder and flash it:
fastboot flash recovery twrp-3.0.3-0-shamu.img
There's 0.01% it works but doesn't anything to try at this point...
5.1 said:
Hmm... Could you just try to flash twrp?
https://dl.twrp.me/shamu/twrp-3.0.3-0-shamu.img
Place the file in fastboot folder open a cmd, cd in fastboot folder and flash it:
fastboot flash recovery twrp-3.0.3-0-shamu.img
There's 0.01% it works but doesn't anything to try at this point...
Click to expand...
Click to collapse
I'll give it a shot
the200sx said:
I just read through the entire thread, while it sounds like method 2 would most likely be the option considering how I can't get into recovery, I wasn't able to find where anyone talked about it unbricking the phone. At this point I'm ready to try just about anything, but I had hoped there would be a method to keep data. It may have to wait until tomorrow so I can dedicate enough time to it. In the meantime, if anyone can point me into the direction of someone being stuck similarly to me and what they did to get out of it, I would be extremely grateful.
Thanks
Click to expand...
Click to collapse
Ok, I didn't remember this right, the developer preview ota sideloading with adb was for fixing the Google ota update which bricked some devices as the n previews were released.
But you have nothing to loose, so you may try to do this. Here's a working download in the link, if you don't sideloading the userdata your data may stay intact. https://www.reddit.com/r/nexus6/comments/49txh3/bricked_nexus_6_after_android_n_ota_update_stock/
5.1 said:
Hmm... Could you just try to flash twrp?
https://dl.twrp.me/shamu/twrp-3.0.3-0-shamu.img
Place the file in fastboot folder open a cmd, cd in fastboot folder and flash it:
fastboot flash recovery twrp-3.0.3-0-shamu.img
There's 0.01% it works but doesn't anything to try at this point...
Click to expand...
Click to collapse
It looks like it pushed the TWRP recovery but I still can't seem to get it to boot it into recovery. Only the main fastboot screen pops up trying to Power + Vol and when I VOL select it recovery, it will just reboot back to the main fastboot screen.
Damn... Try:
fastboot erase cache
And try to boot in twrp again?
5.1 said:
Damn... Try:
fastboot erase cache
And try to boot in twrp again?
Click to expand...
Click to collapse
That didn't work either. However it made it take a split-second longer to restart, which gave me a moment of hope. Hope Crushed!!!
Last question... When you power your phone, does it stay on Google logo, or boot animation forever? Or directly bootloader?
If one of the first two, is the phone detected on your computer device manager? If yes, how?
Hello guys. Thanks for tacking a look at this thread.
I have a P8Lite ALE-L21 that some time ago I seat my ass on it and screen broke and even bend a bit the frame. I have lots of pictures from a trip that I´m desperate thinking that maybe I will lose them.
First of all I brought a new frame with new screen. Replace the good looking board to new frame. Tried to turn on the phone and starts to loop trying to boot but never boots. I have read that this is an usual issue with this phones.
Now I´m stuck at the fastboot & rescue mode not knowing what to do next.
Is it possible to restore the phone to factory settings and after that try to recover the pictures? If it´s possible to restore it can someone give me some instruction on how to do it?
I will apriciate all the help from you guys.
Thanks
tcolaco said:
Hello guys. Thanks for tacking a look at this thread.
I have a P8Lite ALE-L21 that some time ago I seat my ass on it and screen broke and even bend a bit the frame. I have lots of pictures from a trip that I´m desperate thinking that maybe I will lose them.
First of all I brought a new frame with new screen. Replace the good looking board to new frame. Tried to turn on the phone and starts to loop trying to boot but never boots. I have read that this is an usual issue with this phones.
Now I´m stuck at the fastboot & rescue mode not knowing what to do next.
Is it possible to restore the phone to factory settings and after that try to recover the pictures? If it´s possible to restore it can someone give me some instruction on how to do it?
I will apriciate all the help from you guys.
Thanks
Click to expand...
Click to collapse
Hmm, if you have twrp dirty flash personas mod. If you don't, try t flash twrp, and after flash the mod. That won't delete your files, only make your phone to boot. Hopefully you had Android 6 already.
tcolaco said:
Hello guys. Thanks for tacking a look at this thread.
I have a P8Lite ALE-L21 that some time ago I seat my ass on it and screen broke and even bend a bit the frame. I have lots of pictures from a trip that I´m desperate thinking that maybe I will lose them.
First of all I brought a new frame with new screen. Replace the good looking board to new frame. Tried to turn on the phone and starts to loop trying to boot but never boots. I have read that this is an usual issue with this phones.
Now I´m stuck at the fastboot & rescue mode not knowing what to do next.
Is it possible to restore the phone to factory settings and after that try to recover the pictures? If it´s possible to restore it can someone give me some instruction on how to do it?
I will apriciate all the help from you guys.
Thanks
Click to expand...
Click to collapse
flash twrp, if your internal storage isnt encrypted then put a microsd card into your phone and copy your data.
Sent from my LG-K220 using XDA Labs
D1stRU3T0R said:
Hmm, if you have twrp dirty flash personas mod. If you don't, try t flash twrp, and after flash the mod. That won't delete your files, only make your phone to boot. Hopefully you had Android 6 already.
Click to expand...
Click to collapse
In the fastboot & rescue mode it the bottom it says in green "PHONE Locked". This might be a problem to flash ?
I run adb and my device is detected if I use "fastboot devices". When I try to run "fastboot flash recovery" it gives me the message below;
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (26000 KB)...
OKAY [ 0.621s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.627s
tcolaco said:
In the fastboot & rescue mode it the bottom it says in green "PHONE Locked". This might be a problem to flash ?
I run adb and my device is detected if I use "fastboot devices". When I try to run "fastboot flash recovery" it gives me the message below;
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (26000 KB)...
OKAY [ 0.621s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.627s
Click to expand...
Click to collapse
Unlock your bootloader... Get the unlock code, unlock it, and than repeat.
D1stRU3T0R said:
Unlock your bootloader... Get the unlock code, unlock it, and than repeat.
Click to expand...
Click to collapse
How do I get the codes ?? can you please clarify me.
Thanks
tcolaco said:
How do I get the codes ?? can you please clarify me.
Thanks
Click to expand...
Click to collapse
Search in the megathread and you will find it