[Tutorial] Rollback from N to MM for C432 devices - Huawei P9 Lite Guides, News, & Discussion

Many people have problems to get back from C432B336 to C432B160/151/etc. so I decided to briefly explain, how to rollback using official Huawei tools. I am not responsible for any damage, soft bricks, hard bricks, etc. Internal storage will be wiped clean! This method worked for me, I did it twice on L31 and L21, both times without any problems. All firmware files come from official Huawei support for Germany, UK, and Poland. Here we go:
1. Preparation
A few things are necessary before we can rollback:
SD Card (needed to apply update)
Huawei Rollback File
For L31C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93787&siteCode=de
For L21C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93800&siteCode=pl
For L11C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93764&siteCode=uk
Full OTA Software File (for the system You want to finally end up with)
L31C432B160: http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=de
L21C432B160: http://download-c1.huawei.com/download/downloadCenter?downloadId=93802&siteCode=pl
L11C432B161: http://download-c1.huawei.com/download/downloadCenter?downloadId=93804&siteCode=uk
PC/Mac and USB cable
2. Going to C900B300
Rollback file will change Your software info to C900B300. As far as I know, this is a specific firmware key, that alows to fully update firmware to any other version. What you need to do:
Download and unpack Huawei Rollback File for Your device (links in chapter 1)
Copy "dload" folder from unpacked file to Your SD card
Turn off Your phone and turn it back on, holding POWER, VOL+ and VOL- buttons
Now, Your phone should apply update from SD card, and reboot
In Your phone, go to "Settings" -> "About Phone". If Your software version is LXXC900B300, everything is fine, and You can proceed
2. Switching to Marshmallow
Download and unpack Software File for Your device (links in chapter 1)
Remove all files from "dload" folder on Your SD Card, and copy "UPDATE.APP" from the file You just unpacked to this folder
Turn off Your phone and turn it back on, holding POWER, VOL+ and VOL- buttons
Now, Your phone should apply update from SD card, and reboot
Second reboot may last a while, but eventually You'll see a popup informing about removing user data
Next reboot will bring You a fresh install of MM,
Done
Again, I'm not responsible for any bricks, crashes, etc. If You want more information or help, please, leave a comment in this thread.

SteadyDisorder said:
[*]In Your phone, go to "Settings" -> "About Phone". If Your software version is LXXC900B300, everything is fine, and You can proceed
Click to expand...
Click to collapse
Hmm, update process of rollback file went fine, but in settings>about, it says build number is NRD90M test keys..
Should I proceed to next step?
EDIT: never mind, I did second step, and it worked like a charm

SteadyDisorder said:
Many people have problems to get back from C432B336 to C432B160/151/etc. so I decided to briefly explain, how to rollback using official Huawei tools. I am not responsible for any damage, soft bricks, hard bricks, etc. Internal storage will be wiped clean! This method worked for me, I did it twice on L31 and L21, both times without any problems. All firmware files come from official Huawei support for Germany, UK, and Poland. Here we go:
1. Preparation
A few things are necessary before we can rollback:
SD Card (needed to apply update)
Huawei Rollback File
For L31C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93787&siteCode=de
For L21C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93800&siteCode=pl
For L11C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93764&siteCode=uk
Full OTA Software File (for the system You want to finally end up with)
L31C432B160: http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=de
L21C432B160: http://download-c1.huawei.com/download/downloadCenter?downloadId=93802&siteCode=pl
L11C432B161: http://download-c1.huawei.com/download/downloadCenter?downloadId=93804&siteCode=uk
PC/Mac and USB cable
2. Going to C900B300
Rollback file will change Your software info to C900B300. As far as I know, this is a specific firmware key, that alows to fully update firmware to any other version. What you need to do:
Download and unpack Huawei Rollback File for Your device (links in chapter 1)
Copy "dload" folder from unpacked file to Your SD card
Turn off Your phone and turn it back on, holding POWER, VOL+ and VOL- buttons
Now, Your phone should apply update from SD card, and reboot
In Your phone, go to "Settings" -> "About Phone". If Your software version is LXXC900B300, everything is fine, and You can proceed
2. Switching to Marshmallow
Download and unpack Software File for Your device (links in chapter 1)
Remove all files from "dload" folder on Your SD Card, and copy "UPDATE.APP" from the file You just unpacked to this folder
Turn off Your phone and turn it back on, holding POWER, VOL+ and VOL- buttons
Now, Your phone should apply update from SD card, and reboot
Second reboot may last a while, but eventually You'll see a popup informing about removing user data
Next reboot will bring You a fresh install of MM,
Done
Again, I'm not responsible for any bricks, crashes, etc. If You want more information or help, please, leave a comment in this thread.
Click to expand...
Click to collapse
It works with unlocked bootloader?

I failed on the first step, it says "Software install failed! Incompatibility with current version. Please download the correct update package." I'm on VNS-L21C432B336

edyy1111 said:
It works with unlocked bootloader?
Click to expand...
Click to collapse
I think it will, but haven't tested it

Acoca said:
I failed on the first step, it says "Software install failed! Incompatibility with current version. Please download the correct update package." I'm on VNS-L21C432B336
Click to expand...
Click to collapse
Try downloading rollback package for Your country, maybe that will help. You can find them on Huawei support site.

Did it yesterday. Works perfect for me. THX for the links

Done today and it worked perfectly (rollback from c432b335 to c432b161).
Bye, folks!

First file installed, rebooted... stuck seeing the Huawei logo... :/
Edit: it booted but the build number says i'm on test-keys and still android 7...And missing half of the apps
So I don't know if I can continue with the rollback

Chippie_83_ said:
First file installed, rebooted... stuck seeing the Huawei logo... :/
Edit: it booted but the build number says i'm on test-keys and still android 7...And missing half of the apps
So I don't know if I can continue with the rollback
Click to expand...
Click to collapse
Are you sure you used correct rollback package?

SteadyDisorder said:
Are you sure you used correct rollback package?
Click to expand...
Click to collapse
At the moment I'm not so sure anymore! But I am sure I used the L31 version, which is the one I need...
Edit: solved! See this thread

I can't downgrade to 6.0
It always fails when I try to apply the first step, and I can't find an package for my country(Romania) VNS-L31C432B336. I tried all the possible packages, and it doesn't work...

I can't downgrade to 6.0 too...i fail the fist step(the install upgrade goes well but the reset doesn't), i'm quite sure i used the right rollback package. I'm now stuck, hiSuite doesn't work(it doesnt' recognize the device or something like that) eRecovery cannot retreive the package to reset. I really don't know what to do.
Update: the phone is not bricked,there's some part of a OS similar to android,witout keybord, navigation bar and notification bar. Is it a clone??D: i should have wiped cache and factory reset(somehow)but nothing seems to work, everything fail.

SteadyDisorder said:
Many people have problems to get back from C432B336 to C432B160/151/etc. so I decided to briefly explain, how to rollback using official Huawei tools. I am not responsible for any damage, soft bricks, hard bricks, etc. Internal storage will be wiped clean! This method worked for me, I did it twice on L31 and L21, both times without any problems. All firmware files come from official Huawei support for Germany, UK, and Poland. Here we go:
1. Preparation
A few things are necessary before we can rollback:
SD Card (needed to apply update)
Huawei Rollback File
For L31C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93787&siteCode=de
For L21C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93800&siteCode=pl
For L11C432 (EU): http://download-c1.huawei.com/download/downloadCenter?downloadId=93764&siteCode=uk
Full OTA Software File (for the system You want to finally end up with)
L31C432B160: http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=de
L21C432B160: http://download-c1.huawei.com/download/downloadCenter?downloadId=93802&siteCode=pl
L11C432B161: http://download-c1.huawei.com/download/downloadCenter?downloadId=93804&siteCode=uk
PC/Mac and USB cable
2. Going to C900B300
Rollback file will change Your software info to C900B300. As far as I know, this is a specific firmware key, that alows to fully update firmware to any other version. What you need to do:
Download and unpack Huawei Rollback File for Your device (links in chapter 1)
Copy "dload" folder from unpacked file to Your SD card
Turn off Your phone and turn it back on, holding POWER, VOL+ and VOL- buttons
Now, Your phone should apply update from SD card, and reboot
In Your phone, go to "Settings" -> "About Phone". If Your software version is LXXC900B300, everything is fine, and You can proceed
2. Switching to Marshmallow
Download and unpack Software File for Your device (links in chapter 1)
Remove all files from "dload" folder on Your SD Card, and copy "UPDATE.APP" from the file You just unpacked to this folder
Turn off Your phone and turn it back on, holding POWER, VOL+ and VOL- buttons
Now, Your phone should apply update from SD card, and reboot
Second reboot may last a while, but eventually You'll see a popup informing about removing user data
Next reboot will bring You a fresh install of MM,
Done
Again, I'm not responsible for any bricks, crashes, etc. If You want more information or help, please, leave a comment in this thread.
Click to expand...
Click to collapse
if you have oeminfo l31c636 you can share for me thanks

Success!
I actually did this exactly the same way with the help of Huawei Customer Service. They saved my life and this tutorial will save many more!

markositoo said:
I actually did this exactly the same way with the help of Huawei Customer Service. They saved my life and this tutorial will save many more!
Click to expand...
Click to collapse
They didn't answer to me..

robi10101298 said:
They didn't answer to me..
Click to expand...
Click to collapse
That is really strange. I received an answer from them the very next day after I sent my e-mail describing my problem. Then it was just a matter of a few hours and constant e-mail exchange with them, talking about the problem, and eventually they found a way to fix it and it worked like a charm. The fix is exactly the same as in this thread.

Followed the guide to rollback from vns-l31c432b336 to b161 and worked flawlessly: just to give more details on the installation progress, if you see an error message during data erase in the first dload installation, don't mind it, reboot and proceed to next step, if you did follow exactly what the OP says, you will have no problem with last installation!
Thanks a lot for the tutorial, saved me lot of time and efforts!

Thanks!
works perfect!
Thanks a lot!

markositoo said:
That is really strange. I received an answer from them the very next day after I sent my e-mail describing my problem. Then it was just a matter of a few hours and constant e-mail exchange with them, talking about the problem, and eventually they found a way to fix it and it worked like a charm. The fix is exactly the same as in this thread.
Click to expand...
Click to collapse
I finally received a message from them.. They said my phone it's not made for Romanian market and they can't help me with this problem.. Very nice..

Related

Cannot upgrade P7-L07 with EMUI 2.0

Hi,
a friend of mine has got in China a P7 with a strange EMUI 2.0 firmware (I always knew that P7 came with 2.3 since the first version). I wanted to upgrade it to the EMUI 3.0, then I downloaded the package from emui.com, I extracted the dload directory and copied to the internal memory (the same procedure I succesfully did with mine) but when I booted it holding Vol-, Vol + and Start button I just went into the stock recovery interface.
I though was a problem of the recovery, then I restarted with adb into bootloeader mode but the screen was all empty except for "fastboot mode" wrote at the bottom. When I tried to flash another recovery I got an error saying that flashing the recovery was not allowed.
Anyone knows what the problem is?
Thanks in advance
locked bootloader..
blueIBI said:
locked bootloader..
Click to expand...
Click to collapse
And also is resisting to any attempt to unlock: do not give Product ID so I cannot produce the unlocking code, neither are working all methods I found on the web. I may have to give up
maybe there is a firmware for your p7-L07 like there is for the p6-u06 where you can flash a so called unicom version and first downgrade and then upgrade/update..
and hopefully this downgrade unlocks the bootloader..
just my thoughts..
blueIBI said:
maybe there is a firmware for your p7-L07 like there is for the p6-u06 where you can flash
Click to expand...
Click to collapse
Thanks blueIBI, the problem is how to flash it, since the normal way do not work. After copying the dload directory on the phone memory, if I use the system menu to perform local upate or I reboot by pressing Vol+ Vol- Start I always end up in the recovery menu, the firmware gets never installed.
Will try harder.
jimmi61 said:
Thanks blueIBI, the problem is how to flash it, since the normal way do not work. After copying the dload directory on the phone memory, if I use the system menu to perform local upate or I reboot by pressing Vol+ Vol- Start I always end up in the recovery menu, the firmware gets never installed.
Will try harder.
Click to expand...
Click to collapse
Are you sure this is original P7 not some chinese crap looking like P7?
mrcs64 said:
Are you sure this is original P7 not some chinese crap looking like P7?
Click to expand...
Click to collapse
The phone belongs to a friend of mine. I own another P7 and they look exactly the same. It came in the original box with everything, so I have no doubt that it is original.
The fact that it has EMUI2.0 make me think that it was one of the first released to the market. The phone is working fine, just it is not upgrading on-line and I cannot find a way to upgrade it manually. I will try contacting Huawei support.

Lenovo K4 Note Marshmallow TWRP and Root (Android 6.0) (207, 208, 209,214)

By the Grace of GURU jI.
This process is only for LENOVO K4 NOTE aka A7010a48 aka X3 LITE. 16GB/3GB RAM ONLY THIS MODEL OF PHONE IS SUPPORTED
AND ONLY ON LENOVO FULL STOCK ROM 152 ROW and 207 ROW and 208 ROW and 209 ROW WHICH IS PROVIDED IN THIS THREAD. NOT WITH INCREMENTAL UPDATES.
This Thread is fo The Usersr Familier with Flashing MTK Devices. Noobs have nothing to do with This Thread.
Video Is Here all working.: https://www.youtube.com/watch?v=C0zs-kX-myQ&feature=youtu.be
I'm starting this Thread from my own. Kindly If anyone try this and get bricked or no boot or BootLoop then revert back to Stock 152 ROW. I will not be liable of if any Loss
occurs.
I have accumulated all the files in this thread to make it easy to follow for the users.
A. I'll be Thankful of @gursewak.10 for providing and modified Sevenmaxs TWRP which can install A7010a48 Roms, As sevenmaxs TWRP can only update A7010 Roms.On Lollipop only. This is a major change neeeded for our devices.
Here is Gursewak.10 Thread : http://forum.xda-developers.com/android/general/k4-note-bootloader-unlock-twrp-t3346546
B.I'll Be thank full to @Krishnas096 for his contribution here : http://forum.xda-developers.com/android/general/how-to-install-xposed-framework-lenovo-t3363786
C.Thankfull to Sevenmaxs for Introducing TWRP for Lenovo K4 Note.
D. Greatly Thankful to 'Eisada Sangkant' for providing The TWRP for Marshmallow with no bugs.
Start Process: Download to your Computer :
ROW 208 is here: https://mega.nz/#!9Q8xWZCC
Its Decryption Key is : !kkvRqO7hDo1X2B2Lp7ejh83CXjM6cZyJ__rwMg7M2go
Row 209 Is here: https://mega.nz/#!pJt2wIZD
Its Decryption key is here : !DLvV6sMM2vWrhALHP3vNT_qTzx7K75Nb6gz-k0_WGAs
ROW 214 is here with Decryption key :
https://mega.nz/#!5E8hzS6R!G0mYbdCM2hsm0lcCTtE_98QI7nXYHXyKTrvfKh8CCqY
Follow Steps Fully.
1/.Unlocking recovery Process and Recovery on Lollipop Here : https://mega.nz/#!lYsSmaAZ
Its Decryption key is : !alctx3e34xep7TGGF0e5f3W4vjf9mStadU7vJpumJUg
2/.Marshmallow Recovery for use in Marshmallow only.
Here it is : https://mega.nz/#!FRNDSaRC
Its decryption key is :!RLq93IhCv3DyF2lcD5DR1QEYm0M1usqPATjOfXyrigw
GOLDEN TWRP is here : https://mega.nz/#!5J1lkazC
Decryption Key for GOLDEN TWRP is here: !lqKIfWCftv7_MhTonUsZy6aQVAobYAYZc9kJZVjow5Y
Kindly don't try this recovery on Lollipop.
3/.Stock Rom 207 ROW Here: https://mega.nz/#!dFtiSaIC
Its Decryption Key is: !fGHs1wihBQIuVuu5H8UENY3bUKEinYVHYDBol1WP2xo
4/. NewKingroot v4.90 here : https://mega.nz/#!QV0hECwS
Its Decryption Key Here : !Nw9MUhR_44Z-G0S_EkpGhLTEKHVJbwCl8oIkZyMgH3Q
5/. Supersu v2.71 is here : https://mega.nz/#!9AUASTLC
Its Decryption Key is here : !2fxnrVMPz058dwj-qLM6_-V6a7yf7zAuDDggX0JY7Q8
1.Install ROW 152 directly to your K4 Note. Flashtool provided inside this ROM folder.
Here you can download : https://mega.nz/#!tFNEFLhZ
And its Decryption Key: !6wrzTgkRm8dNOEgEXoRKF0o5F5daXu3VsvQpC3ST9QU
2. Don't start your phone to Normal yet. Just keep it ON by pressing power button, and quickly start pressing both the Volome buttons that you see that you are shaking your
phone in your hands, Stock recovery opens up. Now go to 'Delete User Data' and press'yes. Now go to 'Clear User Data' and press 'yes'.SO TO END RETURN TO MAIN MENU OF STOCK
RECOVERY AND SELECT SHUTDOWN.
PLEASE DONOT 'ON' YOUR PHONE TILL I SAY.
GO BACK TO FlashTool, CLICK (Scatter-loading) GO TO THE FOLDER (lenovo_k4_Note) THEN SELECT (MT6753_Android_scatter.txt) IN PART THAT HAS SEVERAL squares clear ALL AND ONLY
MARK (preloader) AND GO TO (lenovo_k4_Note) Folder then SELECT (preloader.bin) PRESS 'DOWNLOAD NOW' AND ATTACH LENOVO K4 NOTE SWITCHED OFF PHONE TO PC. WHEN YOU GET A BIG
GREEN TICK. TAKE OFF YOUR PHONE FROM USB. FLASHTOOL MUST BE 'ON' TO GO FURTHER.
NOW TICK THE PRELOADER IN FLASHTOOL IN DOWNLOAD AND CLICK CTRL+ALT+V AND YOU GET 'ADVANCED MODE' IN FLASHTOOL. NOW CLICK ON 'WINDOW' AND YOU WILL FIND 'WRITE MEMORY' OPTION
NOW CLICK IT. THEN CLICK 'PHONE PATH' THEN GO TO 'lenovo_k4_Note' FOLDER AND THEN IN 'PATCH' FOLDER CLICK ON 'UBOOT.BIN' AND IT WILL LOAD IT. NOW select 'BEGIN ADDRESS' AND
WRITE THIS ADDRESS THERE 0x1c80000.
NOW 'REGION' SHOULD BE 'EMMC_USER'
CLICK WRITE MEMORY AND CONNECT SWITCHED OFF PHONE TO PC
AFTER SHOWING 'WRITE MEMORY' 'OK' MESSAGE DICONNECT THE PHONE.
NOW REPEAT THE PROCESS: Just keep it ON by pressing power button, and quickly start pressing both the Volome buttons that you see that you are shaking your
phone in your hands, Stock recovery opens up. Now go to 'Delete User Data' and press'yes. Now go to 'Clear User Data' and press 'yes'.SO TO END RETURN TO MAIN MENU OF STOCK
RECOVERY AND SELECT 'RESTART' TO NORMAL.
3. Now keep your phone ON to Normal. After restart go to the 'Settings' and 'About' press several times to 'BuilD Number' to become a Developer. Now keep ON 'Usb Debbuging' and 'Oem Unlocking' Keep it ON also.
4.Now connect yuour phone to your PC or Laptop. A screen popup on your phone now. Tick and press Ok. This is a Must.
5. Now Copy NewKingroot 4.90 to your phone. And start it. Root your Loolipop Phone. May it take two or three times to restart programme to root again.
6. Now Connet your Phone usb with PC. And then click unlock_recovery.bat file in folder 'lenovo_k4_Note' please DON'T USE 'run as administrator' click it simply
Now phone will ask to unlock the bootloader and . confirm by pressing volume + only. Hold it through the process.
Watch the command prompt on PC for messages and continue by pressing enter after reading instructions in command prompt.
Disconnect the phone from Usb and switch it on by pressing power button untill vibrate.
Now THE BOOTLOADER UNLOCK AND CUSTOM RECOVERY INSTALLED.
Now repeat 3rd and 4th process again.
and then run 7th process and 8th process
7. DownLoad 'mrw' Folder here : https://mega.nz/#!5UUQmTpK
Its Decryption Key is : !7UkiTLJYAE1D8T5fyrGqlSAvXdlhrgxrKXzP2tUVrmc
Now transfer whole the 'mrw' folder in Phone's Internal Memory.
And after root just install 'Terminal Emulator' and open it.
Then type 'su' it will step down, now write' sh /sdcard/mrw/root.sh '
And it will start and then it will aks to remove 'Kingroot' click ok. then it will ask to download Supersu Bineries now clickok. then click 'Normal' it will start downloading. then it will show upgrade Successful. Then will aks to reboot. click ok. Now you have Supersu installed succesfully.
8. Now download : Xposed Installer Here : https://mega.nz/#!gZlzhZSZ
Its Decryption Key is : !051gdCXlmsaOcv4OJn5fbJ-8LXKxnS4j9m81bDe3V3w
Install Busybox from this folder and install XposedInstaller_3.0_alpha4
Now Copy 'Installer.bin' from this folder to Root of the Internal memory.
Then copy 'xposed-v80-sdk22-arm64' to the Root of The Internal Memory.
Now run 'Terminal Emulator' and in window of your phone just type 'su'
now it will step down. Now type ' sh /sdcard/installer.bin '
it will ask you to type '1' and click 'ok'
it will now install xdaframework. at at end it will say 'cheers' Now check the Xposed installer whether framework is installed or not. Ilenovo_k4_Note not then Please Reboot your phone and check again now xposed installer will work as xdaframework is installed now.
9. Now rum xda installer and go to 'download' and search for 'XBlast tool' download newest version is 1.88.
Now open it in xdaintaller Modules only. And First Tick it then open it and and go to 'Miscellaneous' now click ' Advanced Power-off menu ' now keep 'On' the ' Master Switch' then 'tick' 'Advance power-off menu'
10. Now transfer 'xposed-v79-sdk23-arm64.zip' to your Phone's root of Internal Memory.
Download Here : https://mega.nz/#!NA1B1SDL
Its Decryption Key is : !BMox8oTqaVCQhd2CjJP4c--Ar7Brxmu6l3tJhojIBQQ
Copy the Stock Rom 207 ROW RENAME it update.zip first to the root of your Phone's Internal Memory'
Copy Supersu v2.71 also in the root of the Internel memory of your phone.
Then Reboot and you find Now mode that when you press power button it wil ask for Restart then click it now it will show up For Restart to Recovery also. Press Recovery then phone boot up in Recovery.
Now press install and your screen now in root of Internal Memory. scroll down to update.zip. click it. it will now ask to install then swipe right and it will start Installing, After install go back to menu and click Wipe, then Click Advanded Wipe now 'Tick Dalvik and Cache only and swipe to wipe. After this go back to menu of recovery Now again click Install and go to supersu 2.71 zip file and swipe to install. now again in go to xdaframework v79 only. swipe to install. then reboot your phone and boot to normal.
Now you are now on Marshmallow 207 version. Kindly repeat steps 3rd 4th and 5th (optional). Then copy that 'RECOVERY' for Marshmallow to root of your Phone's Memory.
Now login to play store and download 'Root Explorer' install it then run it.
Let it will attain Root. Then Open it and and go to root and then in system now scroll down and find 'recovery-from-boot.p' Rename it 'recovery-from-boot.bak'
Now again go to Play store and searh for 'Flashify' Install it then open it. Let it attain root. Then go to 'Recovery image' then install recovery.img for Marshmallow at 2/. at top.
Now By the the Grace of GURU JI. You will be on ROW 207 Marshmallow and rooted AND unlocked Bootloader and The TWRP and Fingerprint working with zero bugs.And this Marshmallow TWRP will acknowledge External Sd Card also.
I Myself confirm that My Process in thread will work on 208 ROW also. If you are working from scratch then follow the process as it is. But if you have worked through the process and already on 207 ROW, Then you have to do That you Transfer 208 ROW to your phone's root of Internal Memory. And rename it as update.zip.Then boot to TWRP and Install that update.zip. Then delete Dalvik and Cache only after update 208 ROW. Noe Precautionly Install supersu 2.71 and Xda framework v82 agane and then boot to normal. Now you are on 208 ROW version and rooted and TWRP working without any bugs. Cheers.
Carliv Recovery 6.1 is available but have restriction as Version 214 only and bootloader unlocked. I have Installed carliv recovery via Golden TWRP already on my phone.
Link is here: https://mega.nz/#!4N8zzIbS!4aQtQvAfhT1am9e277KdpFF0wx7wsirn_9tNZbCecV0
Thanks dude. Let me try this as soon as I get home. Long pending and thanks again for sharing the procedure.
Sent from my Lenovo A7010a48
Superb thread...
Now this is what I call a superb and well detailed thread! Thanks @ramisumi for going in such details. I will surely try these steps out once I download s207 rom(Crap wifi). I will let you know if I come across any problem or bugs.
Well done and keep it going!
Krishnas096 said:
Now this is what I call a superb and well detailed thread! Thanks @ramisumi for going in such details. I will surely try these steps out once I download s207 rom(Crap wifi). I will let you know if I come across any problem or bugs.
Well done and keep it going!
Click to expand...
Click to collapse
Thanks Bro, I have listed those Files I have tried Myself. And I don't wanted that anybody get messed up.
@ramisumi
This is the real work. Thanks a lot brother.
All the K4 users will never forget your contribution.
<MOD EDIT - Don't Quote Long posts.>
Can i follow the same steps for S208 ?
wisewords said:
@ramisumi
This is the real work. Thanks a lot brother.
All the K4 users will never forget your contribution.
Click to expand...
Click to collapse
Thanks Brother, Really your words are so high for me. Overwhelming.
redindian said:
Can i follow the same steps for S208 ?
Click to expand...
Click to collapse
You can try brother and give your response here, So others can also be benefited.
Although I have not noticed any bugs in 207. So if 208 is also bug free or Lenovo have not done any thing to bootloader then YOu can try.
@ramisumi I couldn't get it worked for my phone. Everything was working(twrp,root,supersu,xposed, etc on lollipop) until step 10. After upgrading to marshmallow I ended up boot loop where it says "Android is upgrading". I restarted it's even more worse. It's not booting to stock or twrp recovery also.
spikywits said:
@ramisumi I couldn't get it worked for my phone. Everything was working(twrp,root,supersu,xposed, etc on lollipop) until step 10. After upgrading to marshmallow I ended up boot loop where it says "Android is upgrading". I restarted it's even more worse. It's not booting to stock or twrp recovery also.
Click to expand...
Click to collapse
What Phone do you have pls type the Model exactly n specific
Just keep off your phone for 10 minutes. Then try to ON it. If Fails then revert back to 152 Row I provided here only.
ramisumi said:
What Phone do you have pls type the Model exactly n specific
Just keep off your phone for 10 minutes. Then try to ON it. If Fails then revert back to 152 Row I provided here only.
Click to expand...
Click to collapse
I have India model 7010a48 - 3 GB memory, 16 GB internal version. I left it for around 20 minutes when it was starting apps, nothing happened, so switched off and restarted. This time didn't even go past the boot logo.
Yes I reflashed now back to 152 row only.
spikywits said:
I have India model 7010a48 - 3 GB memory, 16 GB internal version. I left it for around 20 minutes when it was starting apps, nothing happened, so switched off and restarted. This time didn't even go past the boot logo.
Yes I reflashed now back to 152 row only.
Click to expand...
Click to collapse
Sorry Bro, But may you have missed some there in process, I think.
Have you followed 1 n 2 steps? Or you were on 152 before n tried this method?
ramisumi said:
Sorry Bro, But may you have missed some there in process, I think.
Have you followed 1 n 2 steps? Or you were on 152 before n tried this method?
Click to expand...
Click to collapse
I followed Gursewak.10 procedure for 1 and 2 steps as I have s147 row image only and did incremental updates to s152 before unlocking bootloader and recovery. But that's where the difference ends rest were all your steps and files.
I don't mind downloading s152 row image(1.4GB) if anyone else here confirms the procedure works and they could see both twrp and root on marshmallow.
Appreciate your work anyway, its just that am not lucky and I might give a try another time tomorrow.
spikywits said:
I followed Gursewak.10 procedure for 1 and 2 steps as I have s147 row image only and did incremental updates to s152 before unlocking bootloader and recovery. But that's where the difference ends rest were all your steps and files.
I don't mind downloading s152 row image(1.4GB) if anyone else here confirms the procedure works and they could see both twrp and root on marshmallow.
Appreciate your work anyway, its just that am not lucky and I might give a try another time tomorrow.
Click to expand...
Click to collapse
No Bro, I said clearly that you have to update 152 ROW I provided only and then 1 n 2 nd process. You done it wrong. If you are here then follow my steps only. Otherwise this will happen you again n again.
I written these steps was awfull. and if not applied then not complain
spikywits said:
I followed Gursewak.10 procedure for 1 and 2 steps as I have s147 row image only and did incremental updates to s152 before unlocking bootloader and recovery. But that's where the difference ends rest were all your steps and files.
I don't mind downloading s152 row image(1.4GB) if anyone else here confirms the procedure works and they could see both twrp and root on marshmallow.
Appreciate your work anyway, its just that am not lucky and I might give a try another time tomorrow.
Click to expand...
Click to collapse
Then How could you apply even 1st Process?
If Gursewak.10 have posted detailed process a month before. then what were the use of mine
It is not a a question of lucky or unlucky. just follow my steps only. U Will succeed I'm sure.
I say this. It may not work with Gursewak.10 files. And can't work with incremental updates. If any one not follow my Procedure then Don't complaint here.
ramisumi said:
I say this. It may not work with Gursewak.10 files. And can't work with incremental updates. If any one not follow my Procedure then Don't complaint here.
Click to expand...
Click to collapse
Thank you dude I have successfully installed twrp on s207 but first I have installed twrp on s147 and then I update to MM.because I am unable to download s152 firmware as u provide because connection was bad.so I take risk instead of s152 I installed twrp on s147 with all your steps as u provided...thanks dude..
Sent from my Lenovo A7010a48 using XDA-Developers mobile app
Nik001 said:
Thank you dude I have successfully installed twrp on s207 but first I have installed twrp on s147 and then I update to MM.because I am unable to download s152 firmware as u provide because connection was bad.so I take risk instead of s152 I installed twrp on s147 with all your steps as u provided...thanks dude..
Sent from my Lenovo A7010a48 using XDA-Developers mobile app
Click to expand...
Click to collapse
You are the First To confirm it. CHEERS Dude.
Can anyone tell me why my recovery is in Chinese? And how do I get English recovery?
Sent from my Lenovo A7010a48 using Tapatalk

Tried updating to 6.0, stuck at Huawei loadingscreen

Afternoon gents.
So yesterday i tried to update my Mate S with 5.1 Android to the 6.0 version with Huawei´s Firmware. After adding the Dload file to the mobilephone and starting the update sequenze, the phone does a double boot, basically does the first boot as usual, after loading the first boot it reboots and does a second boot. The second boot just gets stuck at the Huawei loadingscreen.
Ive tried to clear both the cache folder and do a factory reset, both did not work. I tried to do a recovery from the Hisuit software from Huawei, but as my phone is not supported by the software, that did not work either. (And yes, i did get the phone into the Fast Boot menu).
So from what i can see, im left with doing a manuel reset of the ROM. This is not something im very good at, allthough i do know alot about PCs, phones is a whole nother area i have not exlored yet.
So i was wondering if anyone here had any help they could provide me with how i can fix this for this specific phone. I do have the stock ROM and the newest ROM with 6.0 Android.
Ive been fooling around with ADB and SP Flash Tools, but i constantly get stuck as im not too sure what im doing.
Any help is greatly appreciated!
Edits
Just a few Edits:
The ADB i simply could not figure out how to use, the SP Flash Tools on the other hand looked quite simplistic and easy to use. Problem i had with the SP Flash Tools is that i only have the Update.APP file, but i did need a Scatter file (and possibly some other files), this is where i got stuck using this software.
Also, i forgot to mention. Whenever i turn off the phone by holding inn the ON/OFF Buttion, it automatically restarts and tries to boot again. Basically i cannot turn it off.
hi..
try to get a full 5.1.1 rom for your mate s..
which cust version do you have?
eu is c432
global is c900
and all others are provider based firmwares or other countries..
so you need to get your proper firmware which is for your country, then take an external sd card..format it on pc (fat32), put a folder on it named "dload", inside this you put the update.app (no need for other files)..
then start your phone by pressing all three hardware buttons (power, vol+ & vol-) at the same time and hold them until the update screen is showing up..
then it should flash/install this firmware..
after that try to start the OTA updater by huawei..
if this doesn't work, take the correct update.app (full version) of the next higher version (in my example it was c432b145 (android 5) - c432b321 (android 6 beta) - c432b361 (android 6 final) ) and do the same as before..
good luck
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk
blueIBI said:
hi..
try to get a full 5.1.1 rom for your mate s..
which cust version do you have?
eu is c432
global is c900
and all others are provider based firmwares or other countries..
so you need to get your proper firmware which is for your country, then take an external sd card..format it on pc (fat32), put a folder on it named "dload", inside this you put the update.app (no need for other files)..
then start your phone by pressing all three hardware buttons (power, vol+ & vol-) at the same time and hold them until the update screen is showing up..
then it should flash/install this firmware..
after that try to start the OTA updater by huawei..
if this doesn't work, take the correct update.app (full version) of the next higher version (in my example it was c432b145 (android 5) - c432b321 (android 6 beta) - c432b361 (android 6 final) ) and do the same as before..
good luck
Gesendet von meinem HUAWEI CRR-L09 mit Tapatalk
Click to expand...
Click to collapse
Hi, thanks for the reply.
To be honest, im not completly sure which i have, but considering i bought it in Norway i supose the EU version is the correct: eu is c432
I did not know you coul boot from an external SD card. this made things alot easyer. Ill drive out to my office where i have a micro SD card coverter and try this fix. Ill bring all the Firmwares and lets hope it all works!
Cheers for the reply man, might just be my lifesaver.
Hello again,
I tried what you suggested with both the stock ROM and the new updated ROM, but it did not seem to work. The problem i get is when the update starts, it reaches 5% when it verifies the software, then i get a "Software install failed!".
Please note i had this problem before i tired this, problem first occured when i did a factory reset of the device. So i belive the phone is still not booting from the SD card, but from thge phone itself as before. How do i solve this?
I could also add. before i did the factory reset, the update did work, but it still got stuck on the boot logo.
I gues ill be sending the phone inn for service tomorrow unfortunatly, cause i cannot figure this out. Thanks though!

Flashing Stock Android

I'm kinda sick of EMUI not letting me use some normal Google features, so I wanted to know whether or not you could flash a Google stock ROM from their website.
Do these ROMs only work with Nexus devices or do they work with any device? Would it be a good idea to flash 7.1.1 directly from Google? Thanks.
Only works with Nexus devices.
No it is a catastrophic idea to try to flash them on a incompatible not listed as compatible device. You will run into a plethora of issues.
benjamen50 said:
Only works with Nexus devices.
No it is a catastrophic idea to try to flash them on a incompatible not listed as compatible device. You will run into a plethora of issues.
Click to expand...
Click to collapse
Ok. Do you know what's a good close-to-stock ROM for my device? Thanks.
Which Huawei P9 do you have? EVA-L09? EVA-L19?
Stock roms
Hello if you broke your Huawei P9 devices i explain how to rebuild and make your phone work without losing your warranty. Lets start:
THIS WORK ONLY WITH HUAWEI P9-EVAL19C432 ONLY WITH PHONE WAS INSTALL ANDROID 7.
THE OFFICIAL ROM CONTAIN THE KEYBOARD HUAWEI AND PROGRAM PACK.
1. You need an sd card 4 gb or largest to put stock firmware update.app on it.
2. Download rollback pack from here and official huawei p9 rom - europe
www point ftpbuzau point hi2 point ro/resurse/android
3. Create a folder on sd card with name: dload
4. Extract the HUAWEI_P9_Rollback Package and copy on card folder dload file update.app
5. Insert sd card on phone and press together VOLUM UP + VOLUM DOWN + POWER button. Phone now will start install the rollback pack. Rollback pack restore phone with a blank firmware code to accept the Android 6 stock rom.
6. After install complete the phone automatic restart after that remove the sd card and copy official rom on dload folder.
ATTENTION after restart please don't precedes wizard just power off phone. If you start install wizard of phone you don't see the keyboard only google voice activate and the official rom don't install huawei keyboard after that.
7 Copy the update.app from HUAWEI_P9_Firmware_EVA-L19 archive on dload card folder an press together VOLUM UP + VOLUM DOWN + POWER button firmware install will start. After reboot power off phone insert gsm sim card and power on phone. Now you can precedes to wizard configuration and the keyboard appear. After start check on system update ota and update your phone to EVAL19C432B210.
This procedure was test on HUAWEI P9-EVAL19C432 with ANDROID 7 after fail to update on EVAL19C432B386. The best rom with this phone is Android 6 EVAL19C432B210 I will recomande to you because the life of battery . Daily usage the phone keep on going 2 days.
benjamen50 said:
Which Huawei P9 do you have? EVA-L09? EVA-L19?
Click to expand...
Click to collapse
EVA L29

Need help to flash stock rom on P SMART 2019

Hi everyone,
I need to flash stock rom on a huawei P SMART 2019
Unfortunately I followed all steps on this link : https://firmwarefile.com/huawei-p-smart-2019-pot-lx1
I installed all drivers, software but when I put in donwload mode, it shows ADB interface ready but not downloading on the phone or sometime I get a fastbook status failed
If anyone had a little trick with this
Thank you.
If you’re still looking for a solution, I reverted a Huawei P Smart 2019 (POT-LX1 but may also be known as POT-L21) back to 9.1 stock ROM by:
1. Downloading the firmware from here: https://androidhost.ru/search.html
2. Putting the 3 zip files from the firmware in a dload directory on a clean SD card then putting it in the phone (please note that some documentation instruct you to put UPDATE.APP in the dload directory. This didn’t work for me.)
3. Powering on the phone while holding both the volume buttons down
The phone would reboot in EMUI recovery, check the presence of the firmware on the SD card, and install it if correct.
Hi
Unfortunately I can't test anymore since I don't have the demo unit with me but thank you
breversa said:
If you’re still looking for a solution, I reverted a Huawei P Smart 2019 (POT-LX1 but may also be known as POT-L21) back to 9.1 stock ROM by:
1. Downloading the firmware from here: https://androidhost.ru/search.html
2. Putting the 3 zip files from the firmware in a dload directory on a clean SD card then putting it in the phone (please note that some documentation instruct you to put UPDATE.APP in the dload directory. This didn’t work for me.)
3. Powering on the phone while holding both the volume buttons down
The phone would reboot in EMUI recovery, check the presence of the firmware on the SD card, and install it if correct.
Click to expand...
Click to collapse
hey..
i have flashed a rom from this site and now my pot-lx1 only boots in recovery.. no erecovery works, no other update.. every time i try to updste again with sd card it fails with error.. so i think i flashed wrong dload firmware.. i was wondering that the first try to flash with sd card and dload works perfectly.. phone says to verify update and pass verifying the firmware on sd card.. update success but phone doesn start now..
i tried factory reset again and this doesnt work..
can u please give me the name or the link for the fitmware files that worked for u?
thanks
I think it was Huawei_P_Smart_2019_POT-LX1_9.1.0.314_C432E8R4P1_Firmware_EMUI9.1.0_05015PRL_Dload.zip
breversa said:
I think it was Huawei_P_Smart_2019_POT-LX1_9.1.0.314_C432E8R4P1_Firmware_EMUI9.1.0_05015PRL_Dload.zip
Click to expand...
Click to collapse
thanks, but does not work for me.. update files from sd not verified from phone.. no update with these files possible..
i tried some other files and find some which updates perfectly..but almost the same.. phone says:
"Your Device has failed verification and may not work properly"
maybe it is bricked for ever...
I hope you'll find a solution. I can't help you any further as I've spent way too much time on that ****ty phone (stay away from Huawei/Honor/Oppo in the future).

Categories

Resources