install VIE-L29C636 on VIE-L29C185? - Huawei P9 Plus Questions & Answers

i want upgrade to N that's not happen to now on my VIE-L29C185
can i install VIE-L29C636 or any same model on my p9 plus VIE-L29C185?

yassine78 said:
i want upgrade to N that's not happen to now on my VIE-L29C185
can i install VIE-L29C636 or any same model on my p9 plus VIE-L29C185?
Click to expand...
Click to collapse
U have Nougat to C185, u can use Firmware Finder to upgrade to B360.
Sent from my VIE-L29 using XDA Labs

Mostar088 said:
U have Nougat to C185, u can use Firmware Finder to upgrade to B360.
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
don't work with it

yassine78 said:
don't work with it
Click to expand...
Click to collapse
Yes it does if u follow this guide.
What you need?
1. Charged phone
2. Enabled installing unknown apps
3. Download Firmware Finder from Google Store (the free version)
what next?
1. Run Firmware Finder
2. Go to settings and Enable Installation via system update.
3. Tool will prompt to download Firmware Finder Proxy - do it then install it
4. Go back to the tool and select firmware of your choice - make sure you select FULL (not OTA)
5. Firmware Finder Proxy window will open - do as described - go to Wifi, advanced add manual proxy as local host with 8080 port
6. Go to phone Settings - System update, DO NOT CLICK ON UPDATE, just click on Menu and choose to "Download latest full package" and then click on Update the phone
7. It will attempt to download it but it may fail (as in my case) with message about unstable internet connection - go back to wifi settings and disable proxy, go back to update and resume it - update should start to download then follow as on screen instructions.

Mostar088 said:
Yes it does if u follow this guide.
What you need?
1. Charged phone
2. Enabled installing unknown apps
3. Download Firmware Finder from Google Store (the free version)
what next?
1. Run Firmware Finder
2. Go to settings and Enable Installation via system update.
3. Tool will prompt to download Firmware Finder Proxy - do it then install it
4. Go back to the tool and select firmware of your choice - make sure you select FULL (not OTA)
5. Firmware Finder Proxy window will open - do as described - go to Wifi, advanced add manual proxy as local host with 8080 port
6. Go to phone Settings - System update, DO NOT CLICK ON UPDATE, just click on Menu and choose to "Download latest full package" and then click on Update the phone
7. It will attempt to download it but it may fail (as in my case) with message about unstable internet connection - go back to wifi settings and disable proxy, go back to update and resume it - update should start to download then follow as on screen instructions.
Click to expand...
Click to collapse
i tried that before and fail, when the phone restart to install the update always fail in 37%

did you locked the bootloader?

kurosaki01 said:
did you locked the bootloader?
Click to expand...
Click to collapse
no i don't installed twrp

Related

[Q] root lg d415?

i have tr .apk installed on my phone then i tried to install the root and it says phone is not currently supported is there anyway i can try and root the device?
If you are on the D415-10e firmware you will how to downgrade it to 10c first using LG_Flash_Tool (it's in the forums if you search by that). After downgrading you can use towelroot to root the device and then disable OTA updates by dialing the following code: 3845#*415#
Having entered the system menu, scroll to WLAN Test.
Select OTA Setting option and turn it off by tapping the Disable button. You can search for the 10c firmware also. I am going to try to attach them, but do not know if XDA will let me yet. Anyhow...the instructions for the Flash Tool are at
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
And the fastboot via adb instructions are:
http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-t-mobile-l90-t2836457

[P8 Lite] Updating the huawei p8 lite when it rootes

Hello,what going to append if i update my rooted phone on B136 to B170 because i readed that if i update with OTA Update my phone can go in a bootloop. Thanks for the answer.
It might be possible. Do not update ota when you are rooted. Download the latest firmware from huawei-updates.ru for your specified model, take the zip into your sdcard in a folder named dload ( you can create it if you dont have it) and go to updater, local update and select it.
Thanks ! and like that I'm not gonna have any problem ?
And and I can directly go to B170 or not?
cristian95 said:
It might be possible. Do not update ota when you are rooted. Download the latest firmware from huawei-updates.ru for your specified model, take the zip into your sdcard in a folder named dload ( you can create it if you dont have it) and go to updater, local update and select it.
Click to expand...
Click to collapse
I made that you say but didn't worked ... thanks for the help .
Keep it in that folder and try to force update by powering down your phone and power it up pressing vol up+ down and power button
Thanks it worked !
No problem sir, here to help
Nooo! don't know why but my phone go to a bootloop.... tried everythink....
Hmm, try to plug in it an usb cable and flash an old firmware for it trough adb.
Can you give me some link to do that ? and thanks !
U need adb toolkit, a version of b170, search on huawei-updates.ru , prefferably the european version. Get huawei package extractor and extract from update.app found in the zip of b170, system.img, cust.img, boot.img,recovery.img. and flash them one by one in fastboot mode. If not, if u had a nandroid backup made with twrp u can restore. U can search google on a detailed guide to do that, as I may induce you in error, not a native explainer talent here
Or you can extract it and flash automatically all in one clic with a script(for all firmware )
dkonect said:
Or you can extract it and flash automatically all in one clic with a script(for all firmware )
Click to expand...
Click to collapse
I got to beta 6.0, installed twrp, root it, but it did not permanently, uninstall some system app (google+, maps, etc) after a few reboots superSU was asking for binaries; so I unroot it.
How can I get back to stock recovery? And if so, If I make a factory reset, would it boot correctly for a new setup (because of the erased apps earlier).
Thanx mates, regards

How to update firmware with TWRP installed?

So I unlocked my bootloader and installed TWRP on the p20pro. Just received status that there's full update available. I downloaded and try to install, but the phone would boot into recovery and nothing happens. How should I go about updating the firmware on the device with TWRP?
Bump
Sent from my SM-G955F using Tapatalk
twe90kid said:
So I unlocked my bootloader and installed TWRP on the p20pro. Just received status that there's full update available. I downloaded and try to install, but the phone would boot into recovery and nothing happens. How should I go about updating the firmware on the device with TWRP?
Click to expand...
Click to collapse
Either reflash the stock recovery or keep TWRP and use HuRUpdater Tool (search for it here on XDA)
Pretoriano80 said:
Either reflash the stock recovery or keep TWRP and use HuRUpdater Tool (search for it here on XDA)
Click to expand...
Click to collapse
Hi.Same issue. Does reflash stock recover wipe all my datas ?
How to use HuruUpdater as ther current TWRP does not allow to access on local files (no decryption).
THanks
JP
here's the details
- Unlock bootloader from Huawei : http://emui.huawei.com/en/plugin/unlock/index
- (It's still possible to unlock the bootloader. Just send an email to your local support or tweet them (HuaweiUK). They'll ask you for some info and send you the unlock code. Took me two days to get the code)
- TWRP : https://forum.xda-developers.com/hua...2-1-0-t3779400
- hurupdater_0.3.zip https://forum.xda-developers.com/hon...overy-t3769279 also works perfectly for P20 Pro
Magisk file (if you want to get rooted) https://******************/Magisk/Magisk-v16.0.zip
Now, get patient, an old man did it!
In future direct links for our CLT-L29 european(C432)..
http://pro-teammt.ru/firmware-databa...irmware_page=0
Click on FullOTA-MF (only!) and click on filelist I had to click several times on filelist to get the links to the 3.zip files needed (thinks to Tecalote for his patience!)
So, the difficult part was to rename the.zip files( I went to #32, page 4 and renamed exactly like it was : Download firmware files (for official firmware use Huawei Firmware Finder).
1. Put files you want to flash in a seperate folder on sdcard.
Supported zip files to flash are (name must match):
o update.zip (use FullOTA file)
o update_full_hw.zip
o update_data_full_public.zip
2. Optional: Put recovery.img (rename your TWRP downloaded "recovery_ramdisk twrp_clt_0.1.img") in same folder if you want to keep custom recovery.
3. Put HuRUpdater zip in same folder. Example:
4. Select only HuRUpdater to flash in custom recovery.
5. Follow instructions on screen. Flashing can take multiple minutes.
Then I followed exactly step by step.
It didn’t work and I had error messages flashing with hurupdater_0.3.zip:
No update_data_public.zip found in /sdcard/”name of your folder”
No update_all_hw.zip in /sdcard/”name of your folder”
As you can see the name of the .zip files did’nt match #32.
I renamed exactly as asked to get rid of the error messages, and BINGO!
Click to expand...
Click to collapse
Update CLT-L29 8.1.0.128(C432) with TWRP already installed
Update CLT-L29 8.1.0.128(C432) with TWRP already installed
Hello,
Many thanks to all of your for your kind support , so I intend to create a summary of what I did, hoping it could help others !
I had already unlock previsouly my Bootloader (of course, else this topic would not exist) via Unlock bootloader from Huawei :https://emui.huawei.com/en/unlock_detail
I already had TWRP and Magisk installed and wanted to get the latest official firmware for my P20-PRO-CLT-L29(C432) - > CLT-L29 8.1.0.128(C432).
When intending to update (from my phone), it could not work (I allways boot back to TWRP), upgrade failed.
Special credits to : @Pretoriano80
sarichter said:
@sarichter
SpH1nX said:
@SpH1nX
Start with : Do your Backup !
Removed then all security (screen unlock in developper mode =0) , no pin, no pattern, no password, no fingerprint, no faceunlock
Download the following set of files (that I've uploaded and ready to use) : https://mega.nz/#F!pEpRDB7R!pmPDjlqgtdHTs39gyLdJhg
(nota : my upload is quite slow, so please wait some hours before it is available)
It contains : HuRUpdater_0.3.zip, Magisk-v16.4-Beta.zip, twrp_clt_0.1.img, recovery.img
, update.zip, update_all_hw.zip, update_data_public.zip
- On your phone create a folder including all files from the package above.
- Boot in TWRP
- Install : HuRUpdater zip from the folder where you had put all files (no issue with decryption, at least in my case)
Nota : I had almost an heart attack during installation as it did a reference to CLT-09... not CLT-29 but it works and this despite some strange error messages.
When achieved : wipe/cache dalvik.
Phone will reboot and optimize the apps.
In my case, I lost my root access and TWRP, so I've done it again, but normally it was supposed to stay when using HurUpdater
Install TWRP (again if needed) :
- Start your device in fastboot mode
- Install the recovery using the following command : fastboot flash recovery_ramdisk twrp_clt_0.1.img
Restart with this command: fastboot reboot
Important : As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP, so the device will boot to TWRP. This is to avoid that the device boot to OS,overwritting TWRP recovery.
Reboot again in recovery
(re)Install : Magisk-v16.4-Beta.zip
Have fun,
JPh
Click to expand...
Click to collapse
Click to expand...
Click to collapse
You lost twrp because you didn't rename the file as recovery.img
SpH1nX said:
You lost twrp because you didn't rename the file as recovery.img
Click to expand...
Click to collapse
I did...but I might have used the wrong version of twrp.
Hi is there any body who testet the New CLT-029 C432B131 (8.1.0.131) ? Ihave try to download via the Firmware Finder but is Says that the File is no longer availiable on the server.
Is there another source where iam able to download the 3 Firmware files to Update with Huru Updater?
blackst225 said:
Hi is there any body who testet the New CLT-029 C432B131 (8.1.0.131) ? Ihave try to download via the Firmware Finder but is Says that the File is no longer availiable on the server.
Is there another source where iam able to download the 3 Firmware files to Update with Huru Updater?
Click to expand...
Click to collapse
You're OT here, try asking here https://forum.xda-developers.com/hu...lt-l29c432b131-firmware-improvements-t3804068
twe90kid said:
here's the details
Click to expand...
Click to collapse
THANK YOU! THIS WORKED SO PERFECTLY!
Until now, I tried the following:
Back up my data and apps to SD card with EMUI Backup App
Download OTA update (it first downloads the incremental ~100-200MB update) and click install
This doesn't work of course - TWRP tries to execute the update command but dies with error messages
Reboot, try downloading/installing updates again, the downloader then downloads the -FULL update
Extract recovery.img from update.zip>update.app
Flash stock recovery over TWRP
Initiate update again from Update App (System Settings)
Update runs smoothly, but bootloader is locked again afterwards
Restore from backup, flash TWRP again, flash SuperSU again
BUT THIS IS MARVELOUS! I will only lose SuperSU and Xposed, and given that HuRUpdater is provided with the correct filenames including TWRP renamed to recovery.img, I will just have to install SuperSU and Xposed again after updating the firmware.
It worked flawlessly with the stock firmware files from update.hicloud.com, and you'll usually find all the links a few hours after the release somewhere on the internet.
EdRoxter said:
THANK YOU! THIS WORKED SO PERFECTLY!
Until now, I tried the following:
Back up my data and apps to SD card with EMUI Backup App
Download OTA update (it first downloads the incremental ~100-200MB update) and click install
This doesn't work of course - TWRP tries to execute the update command but dies with error messages
Reboot, try downloading/installing updates again, the downloader then downloads the -FULL update
Extract recovery.img from update.zip>update.app
Flash stock recovery over TWRP
Initiate update again from Update App (System Settings)
Update runs smoothly, but bootloader is locked again afterwards
Restore from backup, flash TWRP again, flash SuperSU again
BUT THIS IS MARVELOUS! I will only lose SuperSU and Xposed, and given that HuRUpdater is provided with the correct filenames including TWRP renamed to recovery.img, I will just have to install SuperSU and Xposed again after updating the firmware.
It worked flawlessly with the stock firmware files from update.hicloud.com, and you'll usually find all the links a few hours after the release somewhere on the internet.
Click to expand...
Click to collapse
I have a few questions regarding this method to update :
Do I need to make a new backup using twrp after this update since the system files changed due to the update? (correct if i'm wrong i'm a previous iphone owner this my first android device)
Is the any method to force update 8.0 even it will erase every thing and after that just flash twrp and restore backup (i think all the methods mentioned are complicated for me)
P10 Lite
twe90kid said:
here's the details
Click to expand...
Click to collapse
Hi, I have the same problem but with my Huawei P10Lite WAS L1XA with firmware oreo installed from the phone and on reboot enters twrp mode.
Can I ask you to look for the files for my model?
(I spent three hours looking for those files but I could not find anything) ...

How to go to download mode no OS

So I have no OS installed and right now I'm in TWRP how can I go into download mode without a OS. Is there a way without turning off my phone because it says there is no OS when in the reboot options in TWRP.
I went to sammobile the model I have is the
SM-N960F/DS and I don't know which firmware I should download?
R77 said:
So I have no OS installed and right now I'm in TWRP how can I go into download mode without a OS. Is there a way without turning off my phone because it says there is no OS when in the reboot options in TWRP.
I went to sammobile the model I have is the
SM-N960F/DS and I don't know which firmware I should download?
Click to expand...
Click to collapse
Just choose in TWRP to go into download mode.... if it promotes the (No OS) thing... just skip it and it will reboot to download mode either way
Da-BOSS said:
Just choose in TWRP to go into download mode.... if it promotes the (No OS) thing... just skip it and it will reboot to download mode either way
Click to expand...
Click to collapse
But which firmware should I download from Sam mobile or from samfrew?
R77 said:
But which firmware should I download from Sam mobile or from samfrew?
Click to expand...
Click to collapse
Any latest firmware build of your region and if even isn't the latest.. Your firmware will automatically notify you for new update..
Da-BOSS said:
Any latest firmware build of your region and if even isn't the latest.. Your firmware will automatically notify you for new update..
Click to expand...
Click to collapse
Well I only know the model number but I don't know which region I should pick I didn't get a photo or did a check on my phone?

Question Upgrade rooted NE2213 from A12 to A13

Hi,
Do we have an upgrade path to install full OTA of NE2213_11_A.13?
Not sure how to install the update and keep or re root the install? Would also love to keep internal storage intact.
Nevermind. Managed to update following https://forum.xda-developers.com/t/guide-magisk-unlock-root-keep-root.4436663/#post-86896107
xfsck said:
Hi,
Do we have an upgrade path to install full OTA of NE2213_11_A.13?
Not sure how to install the update and keep or re root the install? Would also love to keep internal storage intact.
Click to expand...
Click to collapse
1. Don't recover Magisk in first step
2. Download the Incremental Update. It will fail 3 times. After the phone offers you the Full OTA Update 4.xx GB.
3. Download and Extract it
4. Install Magisk into other Slot. DONT PRESS RESTART
5. Go to settings and press Install Now on OTA.
6. Phone will reboot and install update directly. After reboot, root is still there
paper88 said:
1. Don't recover Magisk in first step
2. Download the Incremental Update. It will fail 3 times. After the phone offers you the Full OTA Update 4.xx GB.
3. Download and Extract it
4. Install Magisk into other Slot. DONT PRESS RESTART
5. Go to settings and press Install Now on OTA.
6. Phone will reboot and install update directly. After reboot, root is still there
Click to expand...
Click to collapse
You need the local update app.. the phone won't offer the reboot option
dladz said:
You need the local update app.. the phone won't offer the reboot option
Click to expand...
Click to collapse
This worked for me.. settings > about phone > download and extract it. After i could press Install Now
paper88 said:
This worked for me.. settings > about phone > download and extract it. After i could press Install Now
Click to expand...
Click to collapse
Yep you can click install. But then it will not stop and will reboot automatically
dladz said:
Yep you can click install. But then it will not stop and will reboot automatically
Click to expand...
Click to collapse
Yes thats true. But before you click install, you can install magisk into the other slot without pressing restart in magisk. After you click install in the update and it will install and reboot automatically. I did this steps and got still root after the update

Categories

Resources