Hello,
I recently rooted my Walkman F886 (Android 4.1.1) and I did something wrong (messed with some system settings, I know my mistake.).
My main problem is that the SystemUI does not shown the statusbar as well as the softkeys anymore.
Does a systemUi.apk from a other modder help, if I install it?
I uploaded some files from my systemUI (Raw files and APK), maybe you can figure it out what happened.
Thanks for helping me out!
Nii-Nii said:
Hello,
I recently rooted my Walkman F886 (Android 4.1.1) and I did something wrong (messed with some system settings, I know my mistake.).
Click to expand...
Click to collapse
Simply undo whatever it is you have done, which is a guessing game for everyone else at this point.
Nii-Nii said:
Hello,
I recently rooted my Walkman F886 (Android 4.1.1) and I did something wrong (messed with some system settings, I know my mistake.).
My main problem is that the SystemUI does not shown the statusbar as well as the softkeys anymore.
Does a systemUi.apk from a other modder help, if I install it?
I uploaded some files from my systemUI (Raw files and APK), maybe you can figure it out what happened.
Thanks for helping me out!
Click to expand...
Click to collapse
Try this...
Try this...
Click to expand...
Click to collapse
Does not help, but thanks anyway!
Related
Hello, I am trying to fix the flashlight in my SGA with Adrenaline ROM Final Edition.
I found in another thread how to fix the flashlight in 14 toogle mod.
source:
http://forum.xda-developers.com/showpost.php?p=31913516&postcount=36
I tried to modify the SystemUI.apk myself but keep getting FC. Can someone with more experience test this and if it works upload the apk?
Thanks!
nobody??
If you uploa systemui.apk i will do
Sent from my GT-S5830 using xda premium
@CoolCatGetHome
I attached the systemui.apk.
I tried again to modify and now the status bar dissapeared when i rebooted the phone...
Maybe it is because i am trying to modify the files with notepad¿???
I tried signing, not signing, copy classes.dex, not copying .dex... don't know what else to do
Thanks in advance!
@CoolCatGetHome
Are you back from your vacations?? can you modify the apk please??
thanks.
franciz said:
@CoolCatGetHome
Are you back from your vacations?? can you modify the apk please??
thanks.
Click to expand...
Click to collapse
try this
replace and fix permissions
remove (systemui dalvik-cache), remove (data / data / sytemUI)
reboot
comment
walter11av said:
try this
replace and fix permissions
remove (systemui dalvik-cache), remove (data / data / sytemUI)
reboot
comment
Click to expand...
Click to collapse
Thanks a lot for your response walter11av.
I must have been through 10 different roms since I posted this, but with the last ROM, the flashlight worked great, it was a CM10.1.
Now I have an UMI X2 and I have the SGA for replacement in case something happens to the new one.
Thanks again!!!
Hi to all. I want to include Lidroid Toggles v2 in Warrior Rom SystemUI.apk with SystemUIsettings.apk. Someone could tell me what are the files to modify? Thanks
gorneman said:
Hi to all. I want to include Lidroid Toggles v2 in Warrior Rom SystemUI.apk with SystemUIsettings.apk. Someone could tell me what are the files to modify? Thanks
Click to expand...
Click to collapse
Is Lidroid Power Widget already included in your rom (I think this is the case) ? Do you want to change only the icons ?
Yes, lidroid included, but I suppose version 1.
I want to update it to version 2 and replace icons with these. And add SystemUIsettings.apk.
I decompiled SystemUI.apk and changed icons, but do not work.Thanks for the help
gorneman said:
Yes, lidroid included, but I suppose version 1.
I want to update it to version 2 and replace icons with these. And add SystemUIsettings.apk.
I decompiled SystemUI.apk and changed icons, but do not work.Thanks for the help
Click to expand...
Click to collapse
- First download XperiaT_JB_NotificationWidget_v2.
- Then extract SystemUI.apk from this zip.
- Open SystemUI.apk with Winrar (don't extract anything just open).
- Go in res/drawable-xhdpi
- remove the old icons and copy the new ones
- close Winrar
- copy SystemUI.apk in the zip
- flash the zip
- Enjoy
nreuge said:
- First download XperiaT_JB_NotificationWidget_v2.
- Then extract SystemUI.apk from this zip.
- Open SystemUI.apk with Winrar (don't extract anything just open).
- Go in res/drawable-xhdpi
- remove the old icons and copy the new ones
- close Winrar
- copy SystemUI.apk in the zip
- flash the zip
- Enjoy
Click to expand...
Click to collapse
I did it, but I can't access settings (Icon is gone from drawer)
gorneman said:
I did it, but I can't access settings (Icon is gone from drawer)
Click to expand...
Click to collapse
Strange...
Try to flash my mod Elegance and say me if it works.
You mod is great, but I don't like nav bar buttons (I like blue, but I prefer old icons), Could I change them?
gorneman said:
You mod is great, but I don't like nav bar buttons (I like blue, but I prefer old icons), Could I change them?
Click to expand...
Click to collapse
I'll do it, with the stock buttons
nreuge said:
I'll do it, with the stock buttons
Click to expand...
Click to collapse
nreuge I love the sony style icons and I really want to get them working on my xperia t with lidroid v1 however I have tried and tried with apktool and then with the opeining the systemui.apk in winrar and dropping the png files into there but I am still left with the original style icons.
Would you please be kind enough to make me a .zip with the sony style icons in the v1 lidroid please it would help me out alot as I love the mod, but want to keep my phone looking the sony style.
Thank You
dougie175 said:
nreuge I love the sony style icons and I really want to get them working on my xperia t with lidroid v1 however I have tried and tried with apktool and then with the opeining the systemui.apk in winrar and dropping the png files into there but I am still left with the original style icons.
Would you please be kind enough to make me a .zip with the sony style icons in the v1 lidroid please it would help me out alot as I love the mod, but want to keep my phone looking the sony style.
Thank You
Click to expand...
Click to collapse
Ok, try the attached mod. It's v2 with Sony style icons. No reason that v2 wouldn't work with your rom (with service.jar unsigned, it can be the reason of your previous failures).
nreuge said:
Ok, try the attached mod. It's v2 with Sony style icons. No reason that v2 wouldn't work with your rom (with service.jar unsigned, it can be the reason of your previous failures).
Click to expand...
Click to collapse
Thank You so much, works perfect and looks superb, really happy.
dougie175 said:
Thank You so much, works perfect and looks superb, really happy.
Click to expand...
Click to collapse
No need to say thanks, just click on thanks button beside my posts
nreuge said:
No need to say thanks, just click on thanks button beside my posts
Click to expand...
Click to collapse
Hehe I already did, really getting there with this phone now, if the bluetooth fix you posted works which I can test on monday all I have left to do is get to the bottom of why my phone will display having full service and work as normal, but if I try and make a call or text sometime it will randomly have no service, but I will start a new topic about that
nreuge said:
Ok, try the attached mod. It's v2 with Sony style icons. No reason that v2 wouldn't work with your rom (with service.jar unsigned, it can be the reason of your previous failures).
Click to expand...
Click to collapse
Does this work on any ROM? Like stock ROM?
peter-k said:
Does this work on any ROM? Like stock ROM?
Click to expand...
Click to collapse
It has worked beautifully on deodexed .141 and deodexed .145 for me
dougie175 said:
It has worked beautifully on deodexed .141 and deodexed .145 for me
Click to expand...
Click to collapse
Yes, it should work on all JB stock rom rooted & deodexed.
hi guys so im stripping down the firmware for my note, going to use it for pure gaming now, and im trying to get rid of the signal bar at the top, iv tried using apktool, with no luck, got it decompiled and edted the pic's(resized and set the transparency) needed saved, but failed to recompile, so i replaced the RES Folder with the edited one, via winrar, that still does not work,
if i provide the framework and system ui please can someone do it for me and then tell me how you have done it? its pa 4.4.2
also trying to edit the ouya launcher, so i can use that also, i got it to start and work, just by installing the apk, but the resolution is all wrong, i have no clue where to even start with that, so all help is needed please, just trying to convert it to a gaming device,
thanks, craig
attached files.
181jenkins said:
hi guys so im stripping down the firmware for my note, going to use it for pure gaming now, and im trying to get rid of the signal bar at the top, iv tried using apktool, with no luck, got it decompiled and edted the pic's(resized and set the transparency) needed saved, but failed to recompile, so i replaced the RES Folder with the edited one, via winrar, that still does not work,
if i provide the framework and system ui please can someone do it for me and then tell me how you have done it? its pa 4.4.2
also trying to edit the ouya launcher, so i can use that also, i got it to start and work, just by installing the apk, but the resolution is all wrong, i have no clue where to even start with that, so all help is needed please, just trying to convert it to a gaming device,
thanks, craig
attached files.
Click to expand...
Click to collapse
I think your best bet would be to simply change your ROM. PA has many great features, but it lacks in customizability. I know CarbonROM (I'm using it) has an option to remove the signal icon in the status bar.
Settings -> Carbon Fibers -> Statusbar ->Signal status style -> Hidden
XxPixX said:
I think your best bet would be to simply change your ROM. PA has many great features, but it lacks in customizability. I know CarbonROM (I'm using it) has an option to remove the signal icon in the status bar.
Settings -> Carbon Fibers -> Statusbar ->Signal status style -> Hidden
Click to expand...
Click to collapse
yeah i did change rom in the end, to bean... something lol, but still trying to get the ouya launcher to work, still driving me crazy!
Is that ouya launcher meant for tablets? Because if it is then try changing the screen density through build.prop
XxPixX said:
Is that ouya launcher meant for tablets? Because if it is then try changing the screen density through build.prop
Click to expand...
Click to collapse
no its ouya launcher from the ouya Android gaming console thingy
also what carbon version are you running? i cant get wifi to work
WiFi works fine, running the latest nightly 4.4.4
XxPixX said:
WiFi works fine, running the latest nightly 4.4.4
Click to expand...
Click to collapse
got it working thanks,
can anyone still help with the ouya launcher please?
edit, got the dpi sorted, now works on my note, next question how can i make my Games show in the "play" menu?
Hello everyone !
I have tried to port the latest Z2 Home Launcher and fix some bug on JB.
It is working fine on my device XV Stock ROM JB 4.3.
Sorry for my poor english.
Feautures:
Latest Xperia Launcher 6.3.A.0.5
Full screen show on JB 4.3
A bit fast
Install instructions:
Download the .zip
Put it to SD card
Reboot to CWM and flash it
If you got fc add this two line to your build.prop
Code:
dalvik.vm.dexopt-flags=v=n,o=v,m=y
dalvik.vm.verify-bytecode=false
Download:
- Initial release Dev-Host
Thanks to:
-Sony Mobile
[email protected]Ben Ling for lastest Home.apk
[email protected]serajr for ZU Home full screen ported
[email protected]niaboc79 for old version ported
My first port is base on their ported
Thanks you!!!!
Fully working on my Xperia TX
Waiting more ports
how to make the border around like this.
Can be made with transparent status bar and navigation bar..
Please, thanks in advance
devilmaycry2020 said:
how to make the border around like this.
Click to expand...
Click to collapse
raditzava said:
Can be made with transparent status bar and navigation bar..
Please, thanks in advance
Click to expand...
Click to collapse
in my phone
it is
systemui.apk involved
Leo said:
in my phone
it is
systemui.apk involved
Click to expand...
Click to collapse
Ok, I've got it, need some smali coding and it ok now
bcc290786 said:
Hello everyone !
I have tried to port the latest Z2 Home Launcher and fix some bug on JB.
It is working fine on my device XV Stock ROM JB 4.3.
Sorry for my poor english.
Feautures:
Latest Xperia Launcher 6.3.A.0.5
Full screen show on JB 4.3
A bit fast
Install instructions:
Download the .zip
Put it to SD card
Reboot to CWM and flash it
If you got fc add this two line to your build.prop
Code:
dalvik.vm.dexopt-flags=v=n,o=v,m=y
dalvik.vm.verify-bytecode=false
Download:
- Initial release Dev-Host
Thanks to:
-Sony Mobile
[email protected]Ben Ling for lastest Home.apk
[email protected]serajr for ZU Home full screen ported
[email protected]niaboc79 for old version ported
My first port is base on their ported
Click to expand...
Click to collapse
Taiwaneese?
It works in Xperia V Lt25i with storck firmware 9.2.A.2.5?
How does it really differ? What is improved over the older versions? I mean is there a benefit for the user, ergonomics, functions, fuel consumption? Or is it just the higher version number?
devilmaycry2020 said:
Ok, I've got it, need some smali coding and it ok now
Click to expand...
Click to collapse
Perhaps you mean have to edit smali too? But smali home.apk or sytemUI.apk ??
raditzava said:
Perhaps you mean have to edit smali too? But smali home.apk or sytemUI.apk ??
Click to expand...
Click to collapse
need edit smali home.apk and edit some png file.
devilmaycry2020 said:
need edit smali home.apk and edit some png file.
Click to expand...
Click to collapse
You know where his smali files ?? You mean change the png files in a transparent ??
raditzava said:
You know where his smali files ?? You mean change the png files in a transparent ??
Click to expand...
Click to collapse
you need to decompile the systemui.apk . then you can find smali, xml and png files where you can edit:silly:
Does it need a deodexed rom?
Here Stock Xperia T Rooted 4.3 reporting that work just by moving .apk file, set permission and replace into system folder. It doesn't FC so far at all. No need to flash on CMW in my case.
Transparency by Xposed.
Installed secssufully on Xperia V.
Thanks!
I am working on mods lockscreen on stock lollipop .228 and make it look like xperia x lockscreen,
My problem is i cant make the lockscreen colored cover work on my systemui, please help me to make it work, what smali should i edit?
some of xperia x lockscreen features are successufully ported.
See my attachment.
@STRYDER~007, please just give me a clue bro, i need your help
nophyan said:
@STRYDER~007, please just give me a clue bro, i need your help
Click to expand...
Click to collapse
What exactly do you want to do?
STRYDER~007 said:
What exactly do you want to do?
Click to expand...
Click to collapse
I want to make my lollipop systemui like xperia xz, last thing that make me confused is how to port lockscreen cover. I have searching and reading the smali but there is no clue
nophyan said:
I want to make my lollipop systemui like xperia xz, last thing that make me confused is how to port lockscreen cover. I have searching and reading the smali but there is no clue
Click to expand...
Click to collapse
You can't do that without porting the entire SystemUI.