All,
I am having issues with the current version of TWRP (unofficial) for the TF701. I doesn't see the data partition and can't do backups.
I have seen that other devices have had similar behaviors but nothing on the TF701 and I can't remember where I got my current version.
I have searched here and have found nothing. Although some users refer to a new version - there are no links.
I am running Katkiss 7.1 #21 and have TWRP 3.1.0 0 installed.
Can anyone provide a link to where any updated versions of TWRP can be found? I promise I will bookmark it this time.
Thanks in Advance
Cheers
Not quite sure what are you looking, but check this one here.
There is only one TWRP version for the TF701 and that's the Kang version you seem to have installed.
There were a few updates to it lately but I gave nit tried the latest version. But it seems to be ok. Check the thread in Original Development.
Sent from my Nexus 5X using Tapatalk
Related
Hi guys,
Recently I've used Cyanogenmod Installer to install Cyanogenmod on my HTC One M7, now I've Cyanogenmod 11.0 (XNPQ32P) and the build date is "Wed Aug 6" (build number KTU84Q). But which version is really installed? If I take a look here: http://download.cyanogenmod.org/?device=m7 I can't find a stable or RC version so I'm assuming I've got a snapshot, but there isn't one from 6 Aug... And there are already new snapshots, so why does the updater don't see these?
My questions:
1) Which Cyanogenmod version does Cyanogenmod Installer install?
2) Which channel does this version follow for updates?
3) Do I make a chance to get an update to Lollipop through the updater when it's available?
I hope someone can help me out!
Thanks in advance!
royduin said:
Hi guys,
Recently I've used Cyanogenmod Installer to install Cyanogenmod on my HTC One M7, now I've Cyanogenmod 11.0 (XNPQ32P) and the build date is "Wed Aug 6" (build number KTU84Q). But which version is really installed? If I take a look here: http://download.cyanogenmod.org/?device=m7 I can't find a stable or RC version so I'm assuming I've got a snapshot, but there isn't one from 6 Aug... And there are already new snapshots, so why does the updater don't see these?
My questions:
1) Which Cyanogenmod version does Cyanogenmod Installer install?
2) Which channel does this version follow for updates?
3) Do I make a chance to get an update to Lollipop through the updater when it's available?
I hope someone can help me out!
Thanks in advance!
Click to expand...
Click to collapse
lollipop is Cyanogen 12 you won't get the update running 11
if you want the latest nightly version just download it to the phone and flash it
Thanks for your reply! Does anyone have the answers to my first and second question?
royduin said:
Thanks for your reply! Does anyone have the answers to my first and second question?
Click to expand...
Click to collapse
settings --> about --> Cyanogenmod version
As written in my first post I know it's CM 11 and I know the build date (6 Aug 2014) but I can't find this version on the CM download page, so I think the CM installer installs an other version... And I've no idea which channel this version follows for updates. I hope someone can help me out with that.
royduin said:
As written in my first post I know it's CM 11 and I know the build date (6 Aug 2014) but I can't find this version on the CM download page, so I think the CM installer installs an other version... And I've no idea which channel this version follows for updates. I hope someone can help me out with that.
Click to expand...
Click to collapse
When you install cyanogenmod using the installer you'll only get updates when there is a newer stable or snapshot release. Don't know why its not updating to the latest snapshot, maybe they are using a different channel for the installer.
Why not flashing the latest snapshot? Then you'll be able to choose which channel (nightly/stable/snapshot) you want to use for updates?
http://wiki.cyanogenmod.org/w/CyanogenMod_Installer
Thanks for your reply! I've no idea why I don't receive any new updates, I'll try on the CyanogenMod forum, thanks again!
Edit: just found it: http://forum.cyanogenmod.org/topic/93185-when-will-your-device-see-an-update/ it's another version, not the CM community version.
royduin said:
Thanks for your reply! I've no idea why I don't receive any new updates, I'll try on the CyanogenMod forum, thanks again!
Edit: just found it: http://forum.cyanogenmod.org/topic/93185-when-will-your-device-see-an-update/ it's another version, not the CM community version.
Click to expand...
Click to collapse
This post also explain it
the one-click installer uses code from a separately maintained and tested branch of CM that is not related nor can be compared to the community builds. It will only install stable builds that are tested by our QA engineers in our offices.
(...)
Stable builds will still be available for one-click devices when they are ready to be rolled out.
(...)
If you are wanting more rapid updates, my suggestion is to switch over to community builds.
Click to expand...
Click to collapse
So if you want updates, flash a CM zip
Yes, I've read it and that explains why, thanks again! I'm helped!
Dear XDA users,
I've installed TWRP 3.0.0 and CM13 on my S5 mini a long time ago, but when I found out there was an update available for cyanognmod, I saw there was a newer version of TWRP available! My question is, how do I install the latest TWRP version? Can I just install it using the older version, or does that brick my device? I'm also wondering if it's really necessary to update, since I think the old TWRP version should work fine.
Thank in advance,
StanleyNL (Stan)
MOD EDIT: Solved, closed per OP request
Hi everyone, so some mistakes have been made today. While playing around with substratum theme engine on my mix running lineage-os 14.1, i had uninstalled one of the themes and then decided to uninstall the app entirely, however after uninstall it didnt reset the theme, so i rebooted. While attempting to reboot it got stuck in a boot loop. At this point I plugged my phone into my pc and booted into twrp so i could access my files and get them off, however when attempting to boot into twrp i could not use the touch screen which is preventing me from re-flashing my rom. and so after troubleshooting for an hour or soi had all my files off of my device, so i decided to format the system partition. so now i have no rom flashed and a twrp that i cannot use due to lack of touchscreen, its temporarily bricked i guess. So my questions are; A. can i use an otg cable and a mouse to control twrp? B. Is there some way to directly flash a rom from adb or from the connected pc. Then I should also state that I have tried older/newer versions of twrp to try to get the touchscreen working, to no avail (currently running 3.1.1-0 lithium). Ive read that it may be touchscreen drivers or something that are mis-matched from the rom. the onlyt issue is that there is no rom, also ive heard that the touchscreen is at a kernel level so i may need to flash a new kernel to get it working. TBH im not going to do anything else so that i dont completely brick my phone. Thank you all in advance for helping out!
Please try this (older) TWRP by MrRaines: https://www.androidfilehost.com/?fid=673368273298927160
It's TWRP 3.0.2-0 based but has different kernel/driver that is more compatible with a varous bunch of ROMs.
You're a god, this is exactly what I needed, thanks!!!
raupe said:
Please try this (older) TWRP by MrRaines: https://www.androidfilehost.com/?fid=673368273298927160
It's TWRP 3.0.2-0 based but has different kernel/driver that is more compatible with a varous bunch of ROMs.
Click to expand...
Click to collapse
I LOVE you, spent hours trying to get recovery working. This was the only fix!
Thank you so much brother.
kanej2006 said:
I LOVE you, spent hours trying to get recovery working. This was the only fix!
Thank you so much brother.
Click to expand...
Click to collapse
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono
raupe said:
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono
Click to expand...
Click to collapse
Just see the kernel img, ramdisk and boot files/blobs
raupe said:
Ok glad to read that it works.
Please keep in mind: the TWRP of MrRaines is an older one and is heavily modified.
ATM i'm trying to investigate what's the specific reason other TWRP versions are conflicting with touchscreen drivers on every new release of an stable or dev rom but MrRaines TWRP is still working ^^
The TWRP compatibility case has become even worse with the release of some Android 7.x / Nougat based ROMs - without an official kernel source release for Android 7 by Xiaomi (Android 6 kernel sources should have been released some weeks ago).
Could take a couple of days to find a reason and some more to find a solution...
... any help, tips and confidential information is very welcome @MrRaines @jcadduono
Click to expand...
Click to collapse
Hmmm. I did try two or even three other versions of TWRP. The first two would not even flash giving me an error. The third worked but touch screen would not work. Final attempt was the one from MrRaines which worked perfect!
Hey guys I'm pretty new to this device. So I need a little advice of the already familiar users here. I'm pretty sure that each developer worked really hard to build their following recoveries for our device that's why I don't want to be disrespectful by asking this.
I've seen 3 twrp builds till now
1.Official one.
2.Blue spark one.
3.Twrp in the unified toolkit.
So out of all these which one has most of the things working and has least bugs?
blu spark is best
Use the latest from Bluspark, it's updated and works fine.
Sent from Funk Tuned 3T
Unified 3.0.4-1,official 3.1.1-0,Blu_spark recovery,
All work fine.
Hey guys,
I checked the official TWRP site and noticed a new version as mentioned in the title. Newly released (yesterday i think?). The instructions for flashing oreo beta say to use the Chinese modded TWRP, due to its ability to decrypt the partitions.
I flashed this new (official) version and seems to be working so far. Wondering why I haven't seen any discussion on this here on XDA.
Maybe I'm dense af today and missing something. Apologies if so.
there has been a few discussions on the new versions (3.2.0-0 & 3.2.1-0) in the official thread:
https://forum.xda-developers.com/on...y-twrp-3-1-1-0-touch-recovery-t3632912/page41
and could you elaborate on what "seems to be working" in your experience? thx..
Thank you! I will move my discussion that way!
isn't working on crypted devices