Huawei ascend p7 stuck in bootloop. Started to try to flash the phone, but when plugged into PC, the computer does not recognize the device at all. The problem is, when the phone has working ,my friend (it's about her phone) set the usb function to Charge only. So, is there any way to set the usb to actually transfer files, and lastly to escape the bootloop?
P.S. The phone suffered a fall onto a hard surface a day ago; then got the same problem, but the phone started working within a few hours.
Related
recently in the last few days ive been having problems with my phone .
when plugging in the usb lead from pc to transfer files ,the computer doesnt detect the phone correctly and i get a usb error . tried hard reset etc no difference .
wifes phone connects perfectly . using darkys 7.6 rom on both phones
when i remove the usb cable the phone still indicates that its charging and will continue to do so until i remove battery and restart phone .
the phone detects the cable as it does the indicator bleep ,but i get no mass storage notification.
just hoping the usb connector isnt damaged internally ,doesnt feel loose and the phone is looked after also its the 16 gb version which arent available anymore.
Hi,
A few days ago i tried to connect my phone to the computer but the computer started making connect and disconnect sounds repeatedly. The phone wasn't able to connect to the pc and it didn't charge. I tried another pc with the same result, i also tried other cables again with the same result. But the phone still charged when I connected it to the charger.
Last night however my phone also stopped charging(AC). It was 1% when i woke up and it refused to charge (tried different chargers/cables). I only got it to charge the second time i turned it off and connected the charger. So, the usb port does still work, sometimes when i shut the phone down.
Is anybody familiar with this problem or do you think it's a hardware problem and should I bring it to the store.
Thanks,
Hello,
I am getting a big problem with my HTC one here, it won't charge. It's been a problem I had for like two weeks, when I messed up the installation of a kernel. I don't know if it's related or if it's just a coincidence, but it has never happened before.
So here is what happened. I make a backup of my rom ( pranoid 4.6 BETA-2) and then install the kernel. I install it and it fails ( can't boot ) because I messed up the choice of the kernel. So I restore my backup and then boot.
Later that day I put my phone to charge, one my computer, and notice that it doesn't really charge. Like I plug the USB cable in, it charges for a few seconds, like maybe 5 but can be up to 30, it's random) and then just stop charging. And if I plug the USB cable out of my phone and put it again, it will charge again, but if I plug in and out of my comp it won't.
I tried charging it with wall adapter, same deal. But the major thing that make me almost sure that it's not hardware, if I plug it on my comp, even when the phone stops to charge, it will continue to detect and be able to access USB storage.
I wiped and flash everything I could and it stopped, just like that and started working normally again. Happened an other time, during the whole afternoon, and then worked again.
But happened to me yesterday and still haven't been able to charge it.
So I came here for help, hope some of you can help me fix this.
Thanks
if you think that this is not the hardware problem, you can try to flash RUU.
Find RUU for your CID and flash it via fastboot.
I assume, that your PC sees your phone in fastboot, right?
If you will have any questions, PM to me, coz I'm not all the time at Q&A here
Hi guys,
recently my wife's phone's USB is not working properly.
When plugged to the charger, it does nothing. When plugged to the computer, neither. When rebooting with the USB cable connected, only then detects and charges. When shutting down the phone, it reboots.
I looked at the connector and it is clean, I don't think it's broken if after rebooting it detects it, so a software problem... but it's only my guess.
I tried with another battery, and with another usb cable, nothing!
I'd make a factory reset, but I fear that this won't solve the problem and we will have to reinstall all the stuff... I don't want to flash a custom recovery to do a backup if not necessary becouse of the binary count and for if I need to take it to the shop...
Do you know what could I try?
Ok , so a few weeks ago i dropped my phone twice. From the next day i was facing problem with charging and usb-otg was not working , One side of the Earphone only worked.
And somehow i f***ed my system up also the recovery. now its pretty much dead
Cant flash anything cause usb is not detected
Went to few service centres, they said they have changed the pcb board but no luck, it only charges, no usb connection.
So, wadda hek do i do now?
Any magical way to flash without usb connection?
(Converted mi-a2) Mi-6x
Since you convert it, you basically f* up, mi a2 android one is basically unbrickable. . . Sort of it uts still android one.
Try to charge your phone with a brick. If it starts charging it means it's not totally dead. You can either try to flash a recovery with a usb 2.0 port from your pc or update the pc adb fastboot drivers or flash in edm mode wich requires opening the phone e connect it to the pc while touching in 2 specific spots. If nothing of that works you usb board may be fried and you can always buy one from AliExpress for cheap. Good Luck