Hey guys,
I had a broken touchscreen in my Wizard so I replaced the whole display. Right now the touchscreen works like a charm but something is wrong with contrast...
Someone told me to re-flash the phone so that Windows installs proper drivers for the display, is that right? Or maybe the screen is not 100% compatible with my Wizard?
I'm writing this because I've seen some people here with broken screens, maybe they have some experiance in this matter. BTW if everything works out fine I will have pretty cheap full screens for this kind of phones...
TroLoo
What exactly is wrong with the contrast?
You may be able to correct it by adjusting the contrast settings.
In HKLM\ControlPanel\Contrast delete the redirect key (if there is one) and make a new dword called Groups with value 0 and it will put a Contrast icon in Start>Settings with a slider that lets you select from 16 settings...
Using this reg tweak I get the Contrast applet, but it doesn't work. You can move the sloder, but there is no way to apply the change, and closing out of it doesn;t save the settings. Is there something else that needs to be done? (already soft-reset plenty of times since I did this)
IgwanaRob said:
Using this reg tweak I get the Contrast applet, but it doesn't work. You can move the sloder, but there is no way to apply the change, and closing out of it doesn;t save the settings. Is there something else that needs to be done? (already soft-reset plenty of times since I did this)
Click to expand...
Click to collapse
Doesn't work here also.
It really would be a cool applet....IF it worked (on my Qtek 2.18 Rom).
I have the same problem after replacing the LCD on my HTC Touch Cruise.
The screen seem to have wrong contrast/Brightness settings and I couldn't find a way to calibrate that.
the above twick may have a needs reg key for the value maybe?!
Same problem after installing a new lcd on my touch cruise. The HTC representative said that these are new screens not the same with the old ones.....I don't know if these is true
where did you get the new screen?
Someone have the instruction to change touchscreen fro HTC Diamond.
Thanks
Marco
http://wiki.xda-developers.com/index.php?pagename=HTC_Service_Manual
This link is found at the WIKI of this page......download the Diamond service manual there - you should find all the info you need.....
what do you mean .. change ?
iliescu902 said:
what do you mean .. change ?
Click to expand...
Click to collapse
By "change" I am assuming he wants to change the touchscreen .....I mean, physically replace it.....
If it was meant differently, he should have asked how to change the "look" of the touchscreen but not the screen itself....
But then again, English is not my mother tongue.....
Hi all.! I have a question .. I got my touch Viva to my father (now I have the Touch HD) and now his camera does not work. He reported that it closed a .exe's process from taskmanager (but he doesn't remember it's name). But before everything works, though occasionally had always some little problems (if i open the camera, it occasionally show colored lines across the screen). Now if I click the link from manila 2D or executable link in the start, nothing happens and it seems that there's a software problem. what happened.? how can we solve this problem.?
Pls is important your help i hope that you respond me rapidly..!
devilpera64 said:
Hi all.! I have a question .. I got my touch Viva to my father (now I have the Touch HD) and now his camera does not work. He reported that it closed a .exe's process from taskmanager (but he doesn't remember it's name). But before everything works, though occasionally had always some little problems (if i open the camera, it occasionally show colored lines across the screen). Now if I click the link from manila 2D or executable link in the start, nothing happens and it seems that there's a software problem. what happened.? how can we solve this problem.?
Pls is important your help i hope that you respond me rapidly..!
Click to expand...
Click to collapse
1. You can create Ticket to HTC site and will get the support from HK.
2. You can setup your HTC again (Factory setting). Start > Setting > System > Clear Device (password 1234). but this will remove your current contact. will get a new HTC. and hope camera problem will solved by this way!
Munna
i am also facing the same problem i tried resting but still camera is not working
please help
i also tried to copy the camera.exe but cant replace it
help needed
amandeepkamboj19 said:
i am also facing the same problem i tried resting but still camera is not working
please help
i also tried to copy the camera.exe but cant replace it
help needed
Click to expand...
Click to collapse
guys help me
my camera is not working since 3 months
i tried every thing soft and hard reset but nothing is working.
please help me
i tried to execute camera.exe file in windows folder but nothing happens.
now what should i do??
i tried to replace camera.exe.0409.mui but unable to as it is write protected
please help
is there any way by which i can fix this problem???
I have this problem too!!
hi, does anyone know how to hard reset a t5353 Dual OS so that both Android and WM go back to factory settings?
i was able to do a reset on wm by going thru the settings and all but i'm having problems with android part of it.
HERE IS WHAT HAPPENED TO ANDROID OS!!!
i tried to calibrate the ANDROID screen and instead my finger, i used my stylus. It picked up my stylus during calibration but after that my screen stopped responding to any touch what so ever. i can press volume, windows, back buttons (or soft keys?) etc and they work just fine showing that the OS itself is working but it's not picking up anything on the screen. Actually, i did notice that when it is about to "sleep" and the lights get "dim", me touching on the screen wakes it up... any help would be appreciated....
i have tried the two of the following available HARD REST combination - neither one worked.
i also know that the touch screen itself is working because when i boot it in WM, the screen and everything else works just fine.
i've made a post in another thread but it's under WM area and my problem is with Android (for mods, just in case they think it's double posting--i'm sorry).
more info.
here is some more stuff that i've tried with the advice from adstrylight who was kind enough to spend some time on my problem
adstraylight said:
Android vs WM..
Which version of android do you have with your phone btw? Is it running from internal storage, or the sdcard(the easy way to tell this is if your SDcard contains a file called zimage or not)? I only ask as my phone originally came with android running from th SD, and was laggy/buggy beyond belief, and the latest version of A2.1 (the "fourth edition") is a world away in terms of stability etc.
Click to expand...
Click to collapse
not sure but when it boots, it shows the android logo (monkey or bugg or whatever it is), then it shows SOHO 2, and then shows a screen with "android" written on it...
no Zimage on SDcard. My device did not come with an SD card either and there is only one slot ( that i can see ) and it has my own SD card from before (which does not contain zimage). i even did a search on my entire phone and did not find zimage.
adstraylight said:
Don't know where this came from, but did you try pressing the zoom bar bellow where it says 'ok'? I only did this once, a long time ago, but this thought just occured to me over dinner....
Click to expand...
Click to collapse
yes, that is what i though initially. I was tapping all over the screen, trying to press "zoom out", trying to slide my finger towards "zoom out". I am not sure if it responded to me pressing over "OK" on the screen or "ZOOM OUT" or "CALL BUTTON" but it rebooted and did a hard reset. I was very happy at first only to find out that it only performed a hard reset on WM [very disappointing].
a_sun_of_beach said:
no Zimage on SDcard. My device did not come with an SD card either and there is only one slot ( that i can see ) and it has my own SD card from before (which does not contain zimage). i even did a search on my entire phone and did not find zimage.
Click to expand...
Click to collapse
I think, this device not use zImage and use bootloader.
DmK75 said:
I think, this device not use zImage and use bootloader.
Click to expand...
Click to collapse
i'm not sure what that means... someone asked me in a different post if there was an external SD with a file named zimage... and my answer was that the device itself did not come with an SD card, i installed my own and it does NOT have zimage file.
thanks in advance for anyone who can help.
anyone? i'd really appreciate any ideas.
It could mean that you have a very different setup, or perhaps that it's an Android OS clone. Are you able to install apps through Android Market place ?
shavenyaknz said:
It could mean that you have a very different setup, or perhaps that it's an Android OS clone. Are you able to install apps through Android Market place ?
Click to expand...
Click to collapse
i "was" able to download apps from market place but since the screen does not respond to me "touching an icon", i cant really do much (nothing at all).
NOTE: the screen does however respond when the back light turns dim, me touching the screen wakes it up.
Mann i don't understand how no one knows the answer. All the hackers and crackers making big softwares available to everyone, and no one knows why android OS is not responding to touch????
a_sun_of_beach said:
Mann i don't understand how no one knows the answer. All the hackers and crackers making big softwares available to everyone, and no one knows why android OS is not responding to touch????
Click to expand...
Click to collapse
Pardon?! You own a freaking clone which probably nobody else outside china owns and you are requesting any in deep assistance when nobody has the slightest knowledge about these fancy copy&paste devices?
Form you descriptions though, just to get that right... you had to calibrate your screen where you had to touch the 5 white boxes? If your Android installation is somehow a copy of the XDANDROID system which contains the touchscreen calibration app, then look for a file called "ts-calibration" on your device. Delete it and reboot into Android. (However that is done your device.)
Michael
mweirauch said:
Pardon?! You own a freaking clone which probably nobody else outside china owns and you are requesting any in deep assistance when nobody has the slightest knowledge about these fancy copy&paste devices?
Form you descriptions though, just to get that right... you had to calibrate your screen where you had to touch the 5 white boxes? If your Android installation is somehow a copy of the XDANDROID system which contains the touchscreen calibration app, then look for a file called "ts-calibration" on your device. Delete it and reboot into Android. (However that is done your device.)
Michael
Click to expand...
Click to collapse
1. thank you very much for your response. i will try to find the ts-calibration file and give it a try. i can upload the "rom" online, it says SOHO 2 when it's loading (if that helps?)
2. i think this device reboots like my samsung galaxy s, press and hold POWER and it asks you if you want to go in flight mode, power off etc.
i looked for this file, i actually did a search through my computer to see if i could find the "ts-calibration" but did not find it.
in WM section (using Resco Reg), i found a few .DLL files that had the word "touch" in them. One was "TouchRecognizer" and one was "touch.dll". i'm not sure which one exactly, but there were a few #s that changed after i did a caliberation ( on WM ). Is there a file in Android that's like that, maybe i could just copy those #s from WM into the .dll or something for Android?
thanks again for taking time to help.
No, you can't copy windows DLL to Android. I assume the only chance you have is searching the net, or some dedicated clone forums for the answer on how to reset your android installation.
Sent from my MSM using XDA App
a_sun_of_beach said:
i "was" able to download apps from market place but since the screen does not respond to me "touching an icon", i cant really do much (nothing at all).
NOTE: the screen does however respond when the back light turns dim, me touching the screen wakes it up.
Click to expand...
Click to collapse
Perhaps there is simply no Android?
DmK75 said:
Perhaps there is simply no Android?
Click to expand...
Click to collapse
i hope that the android i messed around with when i first received the phone, and saw all the setting etc was not an illusion? how can there be no android in it?
http://www.moon0755.com/
a_sun_of_beach said:
i hope that the android i messed around with when i first received the phone, and saw all the setting etc was not an illusion? how can there be no android in it?
http://www.moon0755.com/
Click to expand...
Click to collapse
I want to say, no working android.
Read and search in this topic, and you find custom roms.
Even with updated to 2.1 system.bin and data.bin android files.
DmK75 said:
I want to say, no working android.
Read and search in this topic, and you find custom roms.
Even with updated to 2.1 system.bin and data.bin android files.
Click to expand...
Click to collapse
thank you for your help. I have already been talking to some people in the link you just posted.
I've solved my issue by simply re-flashing it.
Thanks everyone who responded.
I have read all thread about this topic, the fact is, G-Sensor is not saving calibration data, and i need that to use the autorotation or gremote mouse features.
Bubbles successfuly calibrates, but seems like the GSensor tool is unable to save the calibration changes, and 1 sec after calibrator, settings are wrong again, always wrong at the same values... lets say -40 on L to R
Is there any fix for this?
Thanks!!!
WeeDv2 said:
I have read all thread about this topic, the fact is, G-Sensor is not saving calibration data, and i need that to use the autorotation or gremote mouse features.
Bubbles successfuly calibrates, but seems like the GSensor tool is unable to save the calibration changes, and 1 sec after calibrator, settings are wrong again, always wrong at the same values... lets say -40 on L to R
Is there any fix for this?
Thanks!!!
Click to expand...
Click to collapse
here , use Diamond GSensor Calibrator to fix it...
yeah, i already tried that one, but the calibration does not save...
Any other idieas?
Thanks btw
can someone help Ms to take the android rom
thanks i needed that!
It worked for you? could you explain what you did?