Database Develop

[Q] need help in slimkat rom

hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this

harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
what i normally do using philz recovery
1) wipe data ( complete wipe to install a new rom)
2) flash slimkat rom
3) flash slim gapps
4) as im having as c6902, i need to flash modules of c6902, hence, flash the modules provided in the monx thread in Xperia Z1 android development
5) flash superuser zip to gain root access later on
6) reboot

Hey
[/COLOR]
harishke said:
hi guys,
I did installed cwm recovery ,unlocked bootloader and tried to flash slimkat rom and got stuck with bootloop with error "process system isn't responding do you want to close".i did reflashed couple of times i have done complete wipe including data.fixed permisions in recovery after all that i am still not able to boot the rom.please help me in solving this
Click to expand...
Click to collapse
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.

Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
stoan123 said:
[/COLOR]
you have to download this file: https://drive.google.com/file/d/0B_3SvSLy59OXUTUweFJpWjYwd1E/edit?usp=sharing
then flash it.
Click to expand...
Click to collapse
Working. thanks bro
Sent from my z1 on slimkat rc2

a
jobangill99 said:
Exact problem. Give This zip a try. Also can you explain what is This file do???
---------- Post added at 04:57 PM ---------- Previous post was at 04:24 PM ----------
Working. thanks bro
Sent from my z1 on slimkat rc2
Click to expand...
Click to collapse
there're diferent between c6903 and c6902. i think that is modem
you can read more detail from thread

thanks a ton guys finally it worked by flashing modem and was able to use the rom:good:

[Q] Not able to install custom recovery in Xperai SP 4.3 .205 Root & BL unlocked

Hi,
I am using Xperia SP, C5302, with Android version: 4.3 and Firmware: 12.1.A.205. I want to install CyanogenMod 11 in my mobile.
Going though different tips and tricks, I was able to root my phone, as well as unlock the bootloader. However, I'm unable to install a custom recovery. It is advised everywhere not to proceed with installing any custom ROM without installing custom recovery.
Currently not able to install CWM recovery in my phone. Also when I tried to boot my phone into recovery, it is not working. Is it because there are no custom recovery installed?
If anyone can tell me how to install the custom recovery in my system, will be very helpful. I've tried installing ROM Manager from Play Store, but it is unable to recognize my device. Also Quick Boot app from Play Store is not able to boot into recovery mode. Also tried using Flashtool and fastboot, not working either. :crying:
Right now, I'm not able to proceed with installing CM11 ROM in my Xperia because I'm afraid I will not be able to boot into recovery mode and hence will not be able to complete the installation and ultimately end up with a bricked phone.
Any help will be greatly appreciated..!!
Regards,
~Ayan

here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop

Nevermind...

deathviper said:
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Click to expand...
Click to collapse
Thanks deathviper. Followed the instructions and got it installed. Also completed installing CM11 ROM in my Xperia. The link was very helpful. I also followed this link: http://www.teamandroid.com/2014/03/...11-xperia-sp-c5302-c5303-kitkat-custom-rom/2/ to install CM11 ROM in my Xperia SP.
Thanks again..!!

rbertoche said:
I've allways thought that a locked bootloader would break your boot to a non-stock kernel. I think I read it from doomlord.
Now I wonder if it only blocks fastboot...
Recently I saw a post about CM10.2 working on locked devices... Now you're saying the same, maybe it started working lately somehow...
Though... Sure you saw that work?
I'm about to relock my device and take my chances, should get to it
Update: You may not want to test something for the first time... This one is tested: http://forum.xda-developers.com/showthread.php?t=2649923
It's a much longer way. To start with you must get root and CWM recovery on 4.1.2, only to get ROOT on 4.3.
Click to expand...
Click to collapse
i was talking bout ubl.... not lbl

Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app

rbertoche said:
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
no prb.... always try to clear your thought and others tooo...

deathviper said:
no prb.... always try to clear your thought and others tooo...
Click to expand...
Click to collapse
I flashed my xperia sp ( same firmware ) to candy5 using the same method . But I did not flash Gapps in one go . After booting the new ROM everything works fine but I am unable to get into recovery now( remains stuck in sony logo) . I used Rashr , the CWM SP too which I used it when my phone was on stock ROM . Left without essential Gaaps . Please help .

you can do this
Download xperia recovery manager from play store

[STOCK][LOLLIPOP 5.0.1] D6502 23.1.A.0.726 IN | Rooted | [NUT] Dual Recovery | ODEXED

Here's a pre-rooted stock Lollipop for locked & Unlocked bootloaders (I've not tested on Unlocked Bootloader) with [Nut]'s Dual recovery.
Made on latest D6502 23.1.A.0.726 Indian version might work on other variations of Z2.
Install Instructions
1) Reboot in recovery and flash the zip
2) Flash The Zip: D6502 23.1.A.0.726 IN.zip
3) Reboot
Link: https://drive.google.com/file/d/0B7hR3gLMx07tOHFhNE9WdmZYTUk/view?usp=sharing
Anyone is welcome to mirror the link
Credits: @[NUT]
Sony for the stock Rom
Sorry for the typo in the subject the LP version is 5.0.2 =

is there any way to get recovery on the rooted lollipop rom?

adi7yli3 said:
is there any way to get recovery on the rooted lollipop rom?
Click to expand...
Click to collapse
This rom contains the recovery. If you are already on a rooted 5.0 rom then you can try installing the recovery from http://forum.xda-developers.com/showthread.php?t=2785598

I'm curious of which customization version is this, like R7C.

Waiting deodexed version from you

Hello, i'm on the existenz 4.5 D6502 , Can i flash this lollipop rom ?
If yes give me the procedure.
Thank u

moba1700 said:
Hello, i'm on the existenz 4.5 D6502 , Can i flash this lollipop rom ?
If yes give me the procedure.
Thank u
Click to expand...
Click to collapse
as far as i know the procedure for installing lollipop is same as all roms before so it goes like that... 1.go to recovery 2.wipe(factory setings) 3. flash this rom and reboot. this rom contains STOCK FIRMWARE so no need to flash stripped ftf also it has ROOT and RECOVERY so there is no worries of loosing it.hope i helped u

Thank u cocagenda2 , but what about the kernel
Should i flash a lollipop kernel ? becouse i'm on kitkat now

I tried to update from 690 w/o wipe nothing, it's working but do not use .690 mods like framework or else - not compatible

moba1700 said:
Thank u cocagenda2 , but what about the kernel
Should i flash a lollipop kernel ? becouse i'm on kitkat now
Click to expand...
Click to collapse
no need to flash lollipop kernel becouse this rom has it in flashable zip so it will flash a lollipop kernel when u install this rom...if u end up somehow in bootloop then u CAN flash KERNEL but i think u wont need that :fingers-crossed:

After flash this fw i have no Signal. no baseband

fumanschuh said:
After flash this fw i have no Signal. no baseband
Click to expand...
Click to collapse
you sure you have D6502 model and not D6503? wont work on that.

Damn you are right i have a D6503. And now?
ok now it works

flashed and working fine
thank u

Sorry guyz for the delayed response down was down with flu....
babydown said:
Waiting deodexed version from you
Click to expand...
Click to collapse
Tried to deodex but was getting many FC's so din't upload the deodex file
cocagenda2 said:
as far as i know the procedure for installing lollipop is same as all roms before so it goes like that... 1.go to recovery 2.wipe(factory setings) 3. flash this rom and reboot. this rom contains STOCK FIRMWARE so no need to flash stripped ftf also it has ROOT and RECOVERY so there is no worries of loosing it.hope i helped u
Click to expand...
Click to collapse
Thanks @cocagenda2 for replying to other users and helping on installation queries....

Which version of NUT recovery is there in this zip?

hello @puneethv...well since im on android for a few years already and have flashed tons of roms on different devices i think i can try my best to help those who are new to this...hope i sad it right for that instaling procedure, cuz for me it worked flawesly. cheers

get installed .zip successfully but the rom seems to be not installed
i reboot to recovery, wipe then flash the zip file.
am i doin it wrong?
used twrp and cwm, they said md5 file not found so i think thats the problem?

cdorepm said:
get installed .zip successfully but the rom seems to be not installed
i reboot to recovery, wipe then flash the zip file.
am i doin it wrong?
used twrp and cwm, they said md5 file not found so i think thats the problem?
Click to expand...
Click to collapse
try to re-download the file. i think it got corrupted.

kunaltyagii said:
try to re-download the file. i think it got corrupted.
Click to expand...
Click to collapse
finally succeed..but now, i have new issue.. memory unavailable in album
---------- Post added at 03:43 PM ---------- Previous post was at 03:10 PM ----------
cdorepm said:
finally succeed..but now, i have new issue.. memory unavailable in album
Click to expand...
Click to collapse
ok, its fine now.done factory reset
---------- Post added at 03:44 PM ---------- Previous post was at 03:43 PM ----------
cdorepm said:
finally succeed..but now, i have new issue.. memory unavailable in album
Click to expand...
Click to collapse
ok, its fine now.done factory reset

Bootloop Problem after flashing stock rom via SP TOOL

I tried flashing stock rom in my lenovo A7000a with lollipop version via SP Flash tool but it stuck in bootloop. Then i installed twrp recovery and root it and flash a custom rom "Androim 7" by thinking that it will solve my problem but it didn't. It still get stuck in bootloop. When it get first boot up in custom rom, for first time bootanimation get change a littel and then it get stuck again and every time i flash stock rom or custom rom it get stuck at bootanimation.

Did u enable da/dl with all checksum in spft?if not u must reflash it again with stock rom after enabling them in spft thats it ????????.???? :highfive:
Hit thanks if i helped

Yes, I have checked da dl all checksum in option->download

Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help

aswinp222 said:
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
Click to expand...
Click to collapse
I did try it by download another stock rom from *Flashing Stock Rom Via SP Flash Tool[Lenovo A7000] by*PrashantRana
But it gets into bootloop.

If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers

aswinp222 said:
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
Click to expand...
Click to collapse
I did as you said above and i downloaded cm13 and istalled it but it didnt work. I have uploaded a video see it. For first time i installed cm13 it goes to cm13 boot animation but in another boot it didnt go to cm13 boot animation. I have provided a video. Have a look.

In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???

aswinp222 said:
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
Click to expand...
Click to collapse
Both are same. A7000a is the model number and Lenovo A7000 Plus is official name of the Device.
I have tried two methods.
1st Method.
First I flash stock rom then I wipe data/cache/dalvik-cache.
2nd Method
I did same as above in this method but I wipe data/system/cache/dalvik-cache.
I have tried two method
1. Dowload only
2. Firware Upgrade
Third method format all didnt didnt work.
It shows some error.

A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.

aswinp222 said:
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
Click to expand...
Click to collapse
Heyy, i got boot up but It again gets reboot and and then its goes to loop. I think the problem is in Cpu Governer. So is there a way to fix cpu frequency?

just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.

aswinp222 said:
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
Click to expand...
Click to collapse
But the kernel is for marshmallow and my phone has lollipop
Does it wok with Cm13

near broken phone after wipe

After I rooted my phone I decided to install a ROM in it. I Found MIUI 7 for the phone and with some instructions it told me to wipe the phone data, use custom recovery and install the .zip and it should be fine. but it went into a boot loop and never booted up. Then I went to download My-ROM v3.3 and still did not work. then I realised it needed the original EMUI to work.
So now I'm stuck here. its been 3 days and my phone still isn't working. my recovery is TWRP.

ImJustChew said:
After I rooted my phone I decided to install a ROM in it. I Found MIUI 7 for the phone and with some instructions it told me to wipe the phone data, use custom recovery and install the .zip and it should be fine. but it went into a boot loop and never booted up. Then I went to download My-ROM v3.3 and still did not work. then I realised it needed the original EMUI to work.
So now I'm stuck here. its been 3 days and my phone still isn't working. my recovery is TWRP.
Click to expand...
Click to collapse
What was the last official version that you were running? Give us as much information as possible.

milan-xda said:
what was the last official version that you were running? Give us as much information as possible.
Click to expand...
Click to collapse
emui 2.3 (b133sp01)

ImJustChew said:
emui 2.3 (b133sp01)
Click to expand...
Click to collapse
That explains why MyRom didn't work. Ok, do you have official UPDATE.APP (B133) on your PC?

No

ImJustChew said:
No
Click to expand...
Click to collapse
I'll dig on the internet later and post a link for you to download.

https://mega.nz/#!RptkFSCa!2y8Ti2qL7ROldNAUZTqecaCUJ03FFWaClD_Hp4Zwuvc
---------- Post added at 03:55 PM ---------- Previous post was at 03:50 PM ----------
Or this one
http://download-c.huawei.com/download/downloadCenter?downloadId=30342&version=54004&siteCode=at