Sorry for my english, I use the google translator.
Put on my watch android wear worked fine until I stopped taking bluetooh signal
I try to restore it with the sammobile rom and when I want to start it goes:. "" An unknow error has occurred. If the problem etc etc etc. "" ""
Anyone help me ??:crying::crying:
Solution
You have to do a restore with odin with new flash with restore files
Try doing it with 15 different firmware from sammobile page and different xables usb and the latest version of odin and nothing
I left the screen in black when you try to start tizen only the samsung logo is seen and ready, the only way to boot now is to return to android wear the which does not link
Related
i was trying to update to tizen my galaxy gear 1 using kies 3 but the update got stuck on 2% and than i disconnected my galaxy gear from my pc . I pressed the power button for a while and then it showed up in download mode so i tried to update it to tizen but this time with odin and that too failed and now my galaxy gear is just showing dots and lines of random colors. and now nor kies 3 ,2 or odin are detecting it.. Please help help needed
thanks
jordan235 said:
i was trying to update to tizen my galaxy gear 1 using kies 3 but the update got stuck on 2% and than i disconnected my galaxy gear from my pc . I pressed the power button for a while and then it showed up in download mode so i tried to update it to tizen but this time with odin and that too failed and now my galaxy gear is just showing dots and lines of random colors. and now nor kies 3 ,2 or odin are detecting it.. Please help help needed
thanks
Click to expand...
Click to collapse
if you reboot by holding the power for like 10 sec, can you get to recovery? Or download mode?
noellenchris said:
if you reboot by holding the power for like 10 sec, can you get to recovery? Or download mode?
Click to expand...
Click to collapse
No just random colors as I mentioned please help
jordan235 said:
No just random colors as I mentioned please help
Click to expand...
Click to collapse
Hmm, does it charge? It may have been bricked. If there is no chance of returning it or warranty then I'm not sure what to do. Since it seems it's been this way for a few days, you may have to be creative. I've had mine fail a few times via Odin and after a few times holding the power I would get back to the kies screen on the Gear which I would try to fix in the recovery part of kies and that would not work since I wasn't installing the update via Kies. But moral of the story was after trying to see the gear in kies and failing, I again tried with Odin 3.09 and it would see the device again. Where I loaded the Odin version which failed, then rebooted gear and tried 2nd time and closed my eyes.. and it loaded. I would make sure nothing is running in the background ( 1st fail I noticed windows detecting device halfway through Odin flash and that caused my issue).
Also if you have another device like a samsung phone, you may see that device in Odin (only suggest this as a way to test if Odin and windows drivers for samsung device are loaded). But hopefully with some reload of the drivers on you computer (on that....try another computer if possible) you will have some success.
If you try all that and it's a no go and still crazy colors and lines.....only thing I can think of is to let battery die and then connect charger and see if it charge's or goes to charge screen. Let me know if you can get to anything else...
Chris
jordan235 said:
No just random colors as I mentioned please help
Click to expand...
Click to collapse
Ditto - rushed into the update before reading up properly and ending flashing with latest Tizen when I should have used the older version with boothloader. Thought I'd recovered the situation when I managed to flash with Android 4.2.2, Odin showed as completed but the Galaxy Gear continued to be stuck on the downloading screen albeit with a download bar showing however it did not reset. Switched it off after a while and then that's when the corrupt screen started and failure to be recognised by the pc
Any help would be appreciated before it hits the bin.............
Binda69 said:
Ditto - rushed into the update before reading up properly and ending flashing with latest Tizen when I should have used the older version with boothloader. Thought I'd recovered the situation when I managed to flash with Android 4.2.2, Odin showed as completed but the Galaxy Gear continued to be stuck on the downloading screen albeit with a download bar showing however it did not reset. Switched it off after a while and then that's when the corrupt screen started and failure to be recognised by the pc
Any help would be appreciated before it hits the bin.............
Click to expand...
Click to collapse
Did the same, reflashed STOCK 4.4.2 (has to original it came with) and restored android. Then updated to NE9 rom then to NF1... Unfortunately the NF1 rom needs some base files installed in NE9. Can't just jump to lastest...
Then rooted it...
How to unbrick galaxy gear !
Hello friend.. ( u can try this method to unbrick your GG )
Previously im also got the same problem as u when im trying to upgrade my GG1 but after a long search i found this link . What u need is just follow the instructions as given and the important things is dont try to skip anything !
How to UnBrick Galaxy Gear: h*t*t*p://youtube/fS4878klPAQ
( delete * from h t t p coz im not allowed to post link yet )
I hope this will help u coz my GG1 has been recover back .. not to original stock rom but it also upgrade my GG1 to TIZEN !!! :good:
And dont forget to thanks to that guys that send the video and me ( coz i need a credit to post another reply to whom that need a help ) and good luck to u all.
AND TO ADMIN : PLEASE DO NOT BANNED ME COZ IM JUST TRY TO HELP SOMEBODY THAT HAS THE SAME PROBLEM WITH ME .... PEACE !
thanks for posting....will give it a try
update: no joy - pc or odin fail to detect the Galaxy Gear when connected via USB
Try this.. maybe it can help
1 - close odin
2 - connect your samsung phone first with the pc via usb cable
* ( pc will detect your phone and auto install usb driver for it )
3 - disconnect your phone
4 - open odin
5 - connect your GG with odin via usb cable that you use to connect your phone to pc
6 - Repeat back the instruction as given
This happen to me before.. but its works for me
*( sorry to forgot to mention that situation ) ... peace
I've got the same problem with my Gear. Screen with random colored dots and lines. Did anyone find a way to fix this? Any help is appreciated.
Did you get this fixed?
PLease Help Urgent my only phone doesnot working!!!!:crying::crying:
Hello Guys, Please help me because my phone is not working and this is the only phone i have so please help me soon.
What Happened:-
I had bought this phone 3 years back in 2012 after 1 month of purchase i updated my phone to official Jelly bean via Samsung kies but my phone had issues like blank screen failing to install official update, So i went to samsung service centre first they refused to service and told me that my motherboard is to be replaced because emmc not working but later they say no need to replace motherboard and installed official update and phone working fine later on i rooted my phone and installed various custom ROMS.
I had been using AICP rom based on kitkat and it is working fine. Some call comes and my phone launcher changed so i goto settings change my launcher but it doesnt change so i rebooted my phone. After that phone booted and AICP bootscreen logo comes after then automatically phone was switched off, Again i switch on the phone but same issue so i go to TWRP recovery and do wipe cache and wipe partition and rebooted my phone but nothing happened galaxy note logo appears and again phone goes switched off.
Problem:-
After that again i went to TWRP Recovery but now failed to go in Recovery mode. Then i go to Odin 3.07 and trying to install official jelly bean via Odin & it displays Pass. Again booted the phone samsung logo comes and then language settings came then after pressing next button phone switch off. After that i tried to install custom ROMS, Clockwork Recovery , Safe Kernels, and official ROMS but situation is same as earlier. Then i install PIT FILE via odin 16 gb pit file with official rom odin shows pass but the situation is same.
Then i go to samsung service centre they go to download mode and where it shows custom binary count:- 1 they told me that you install custom rom i said yes but right now it is on official one ( As i installed Official Firmware via Odin ). They told me that as your phone is old and has no warranty so we try to install our official firmware via odin with all files Like Pit File, Phone, Csc etc. but there is 50 -50 % chance if we fail then you have to replace your motherboard costs around Rs 8500/- or USD $134 which is huge money . Now after installing official firmware with all files got success in odin Phone rebooted with samsung logo and settings come after that phone again switch off means it fails according to samsung service centre.
So after that i become sad but i tried to go to recovery but now good news is yes i get samsung official recovery working perfectly now what to do ? How to check is my emmc corrupted or not ? How to install Lollipop Rom of bauner? How to make my phone working ?
I search xda forum on my issue but not getting exact my situation so Please Help me guys fast .... i think my phone is soft brick not hard bricked.
Thanks in advance for cooperating many needful person and making life easier with sharing of knowledge.:good:
Hi, try going back to official firmware ( i know you already have) , but look for a firmware package with "phone", "pda" and "csc" files to flash, then you're back to square one and can go to a lollipop rom. I had a similar problem and this fixed it
coko___bear said:
Hi, try going back to official firmware ( i know you already have) , but look for a firmware package with "phone", "pda" and "csc" files to flash, then you're back to square one and can go to a lollipop rom. I had a similar problem and this fixed it
Click to expand...
Click to collapse
Which official firmware you are saying and where to find that firmware with phone pda csc files because i searched many official firmware but there download links are dead now. So no option to download. If you have any then please give me link to download and step by step guide or Using Odin just like normally we do .
Thanks buddy for giving your valuable time and suggestion for help.
Does Anybody will help Dr. Ketan, forest 1971
Please Help me guys Dr. Ketan, Forest 1971 plz
Its 4 days and my phone is still not working everything tried but all results FAil:crying::crying:
I've got a second hand Samsung gear (from the bay of fleas)
which has been rooted.
search on here for a stock rom and how to do it.
so downloaded odin v3.09
drivers
and firmwear BTU-V700XXUCOA2-20150427111535 ( took hours to download)
followed the instructions to the letter.
odin just sat and seemed to do nothing for hours (yes hours)
now I have a bricked gear watch.
display reads :-
firmware upgrade encountered an issue. please select recovery mode in Kies & try again.
can't get out of this screen on the watch.
Keis doesn't want to help comes up with :-
SM-V700 Does not support initialising
searched here and on google, tried a few things but still nothing.
please help!!
good day members. I have a samsung galaxy s3 mini and I have not been able to solve an error that I have. when I turn on the device it shows the samsung s3mini logo and then a screen with a ring spinning, after a few seconds, the device is rebooted.
I have tried to install cm, a stock rom, lineage and even nothing. the odin program shows me that the installation of twrp and any rom was successful, but when I turn on the device, it remains the same with the same reboot. What I can do? If someone knows Spanish, I would appreciate it.
I give him a netflix account to help me solve my problem.
The same thing happen to my s3 mini , I not found any solution :/
It seems to be a softbrick.
you could try this: https://androidfilehost.com/?fid=24269982087010584
Put it on AP and flash throug odin
Hi everyone, I am having a similar problem to thread https://forum.xda-developers.com/galaxy-s3-mini/help/bootloop-recovery-installed-odin-t3735947.
In March 2018 I have installed Novafusion RR distribution to S3 Mini because it was rebooting all the time, but since I didn't liked it I went back to the original firmware (Austrian, the cell was bought in Vienna and when my brother gave to me I had to hard reset because was restarting when using some apps. I tried to install Cyanogen but didn't work well and the only firmware I was able to use was the original from Austria, when I've tried the Italian one it didn't work...).
A month later my cell died, it wasn't turning on. The guy in the repair shop told me it wasn't the battery because it was not turning on with direct cable connection... the next day it was when I tried again it turned on, buy kept rebooting after Samsung Logo and model name. I bought a new original battery, charged it but still the same problem.
I tried to install twrp and cwm via Odin but nothing works, it freezes on the "Samsung Galaxy s3 mini" or it keeps rebooting...
If I enter in Odin mode, on Keys it keeps turning the wheel trying to connect but nothing happens. The PC install the samsung drivers normally.
I would like to know if there is something that I can do, because I want to backup some contacts that were saved in the phone memory, sms and the last Whatsapp chat, for some reason the last automatic one is from January even if in march I did have all the chats in Novafusion RR and when I went back to the stock...
I can enter in download mode only. Is it possible to use Odin or something else, like adb, to back up the files? In some threads I've read that if I flash the firmware via Odin, like an update it should keep all the programs, but some people says it delete everything... since I don't want to risk, I would like to know if it is true or not...
Any help, suggestions etc?
wrong edit...
Is it possible to backup files from download mode?