Database Develop

Need help! pls I am stuck at warning bootloader unlocked image

Yesterday I unlocked bootloader and installed TWRP following steps from a thread posted here, got it succesfully done and rooted with SuperSU, booted up no problem. But today I made a mistake by booting into TWRP and performing an advanced wipe with all boxes checked (internal storage, cache, dalvik, etc. ). I think this was my mistake... after that I tried to reboot and it said no OS found try to boot?
I booted up and now it is stuck in the white screen of Warning bootloader unlocked page.
Can someone help me? please. Can I recover? Install OS?
Model: Indian Flipkart version, I believe it is Moto X 1092, had marshmallow on it.

You wiped the System partition, that's where the Android OS is installed, you can't recover (unless you made a backup). Now you can either flash a ROM like CyanogenMod and Gapps with TWRP, or you can flash a full factory firmware with fastboot. I don't know which firmware version your phone uses, but here's a list for the Moto X 2014:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg

Ok, thanks mate I got it that I have to flash a full firmware or a ROM.
Can you pls help me with how can I find which firmware my phone uses?

anirbanhere said:
Ok, thanks mate I got it that I have to flash a full firmware or a ROM.
Can you pls help me with how can I find which firmware my phone uses?
Click to expand...
Click to collapse
I'm only guessing it may be VICTARA_RETEU_XT1092_6.0...
The problem is each firmware version will have modem/radio for a specific region.

Instead of finding what firmware I have to flash, I decided to go with CM 13 ( http://forum.xda-developers.com/mot...om-official-cm-13-0-nightly-releases-t3256580 ) and Slim mini Gapps. will that be good?

anirbanhere said:
Instead of finding what firmware I have to flash, I decided to go with CM 13 ( http://forum.xda-developers.com/mot...om-official-cm-13-0-nightly-releases-t3256580 ) and Slim mini Gapps. will that be good?
Click to expand...
Click to collapse
OK good, but to get info on your phone, boot into bootloader mode, and do "fastboot getvar all", that will show you a lot of specs about your phone, you should copy the info and paste it into Notepad and keep it. Don't paste anything in here though.
NOTE: CM already has root under Developer Options.

Moto xT1068 stuck on formating data and wiping emmc

Hi guys is title says its stuck on formation data (via recovery) and if I try wiping emmc (via factory mode) it gets stuck there.
It all started when I shared 3 apps superbeam,lucky patcher and busybox installer .as I was transferring I started installations them both super beam and lucky patcher installed successfully but in busybox got stuck in installation I tried to switch off by power key but didn't work so I powered off by small key (hidden near SD card) then restarted but got stuck on android logo (bootloop) then I booted into recovery for clearing data and caches but it got stucked there . then I booted into factory mode to wipe emmc but also got stuck there ..
Now here I am with uncharged phone , if I charge it I boot in clearing data and got stuck but if I boot in factory mode and try to wipe emmc it get stuck there ... Please help here I really need to revive it

Please guys help here I really don't wanna lose this phone too (without doing anything) and its Ben detected as v com port....

*been

I am able to connect as fastboot but fastboot OEM get_unlock_data not working for some reason it just keep processing

All you can try now is go and flash the factory firmware stock (according previous android version 5.0.2 or 6.0)
Factory firmware flashing doesnt require bootloader to be unlocked so u can try this

ArtRahul said:
All you can try now is go and flash the factory firmware stock (according previous android version 5.0.2 or 6.0)
Factory firmware flashing doesnt require bootloader to be unlocked so u can try this
Click to expand...
Click to collapse
You mean booting in fastboot then flash stock ROM ?? Sorry man I am new to Motorola and thanks for reply .... Any link to guide would be appreciated.

Mak29 said:
You mean booting in fastboot then flash stock ROM ?? Sorry man I am new to Motorola and thanks for reply .... Any link to guide would be appreciated.
Click to expand...
Click to collapse
Link to Motorola Android 6.0 Stock Firmware, this is the perfect guide with all the steps. viola bhava !

ArtRahul said:
Link to Motorola Android 6.0 Stock Firmware, this is the perfect guide with all the steps. viola bhava !
Click to expand...
Click to collapse
Really sorry to bother you again but now I got it what and how to do (since I m new to Motorola) but after I researched I found I can only flash firmware it was built on so I just need to start flashing xt 1068 br version right? (I found firmware too) I just need pro advice please...

ArtRahul said:
All you can try now is go and flash the factory firmware stock (according previous android version 5.0.2 or 6.0)
Factory firmware flashing doesnt require bootloader to be unlocked so u can try this
Click to expand...
Click to collapse
i tried your method but when trying to flash mfastboot.exe flash partition gpt.bin it says "not supported partition"

Mak29 said:
i tried your method but when trying to flash mfastboot.exe flash partition gpt.bin it says "not supported partition"
Click to expand...
Click to collapse
As I previously said (according to your previous android version means when phone is dead then whatever is the android version (5.0.2 or 6.0) you need to flash the files.)
For eg.
If (your phone is on 5.0.2) then
you need to flash stock 5.0.2 firmware.
elseif (your phone is on 6.0) then
you need to flash stock 6.0 firmware.
endif.
Note: Don't flash wrong files, else it's gonna brick the device.
Don't ever downgrade from latest android version to previous.
Thanks

ArtRahul said:
As I previously said (according to your previous android version means when phone is dead then whatever is the android version (5.0.2 or 6.0) you need to flash the files.)
For eg.
If (your phone is on 5.0.2) then
you need to flash stock 5.0.2 firmware.
elseif (your phone is on 6.0) then
you need to flash stock 6.0 firmware.
endif.
Note: Don't flash wrong files, else it's gonna brick the device.
Don't ever downgrade from latest android version to previous.
Thanks
Click to expand...
Click to collapse
Bro I tried that but unable to flash since gpt.bin is not supported partition

Mak29 said:
Bro I tried that but unable to flash since gpt.bin is not supported partition
Click to expand...
Click to collapse
Have you re-tried that.
That was the last and the least option I knew, hope someone else with higher knwldge will help u out in this.

ArtRahul said:
Have you re-tried that.
That was the last and the least option I knew, hope someone else with higher knwldge will help u out in this.
Click to expand...
Click to collapse
If I retry is is not gonna damage phone?

Mak29 said:
If I retry is is not gonna damage phone?
Click to expand...
Click to collapse
Flashing the factory image never damages the device.
So you can try again but with right things right files and carefully.

ArtRahul said:
Flashing the factory image never damages the device.
So you can try again but with right things right files and carefully.
Click to expand...
Click to collapse
Just 1 more thing ..do I need to start direct flash or follow whole process (locking unlocking) command?

Mak29 said:
Just 1 more thing ..do I need to start direct flash or follow whole process (locking unlocking) command?
Click to expand...
Click to collapse
You can start without lock/unlocking BL.

Zuk Z2Pro Android 7 Version

Hi All,
Was finally able to get a hold of the Android 7 version for Zuk Z2pro, at this point it's in the development phase, looks pretty stable as of now, it's just been an hour since I installed it, Got it from the Chinese site ( Landlord ) a little tough to figure out the content on the site, but the ROM is in English.
I tried flashing it with the Stock Recovery but didn't work , went back to 2.3.044 and then flashed the TWRP ( Chinese Version ) Did a dirty flash, and all the sensors {Heart Rate, UV Sensor, Pedometer, Proximity, etc } seem to be working fine. The file is available in a Baidu link, and it takes a lot of time to download.
The ROM now supports themes but as of now i see only 4 inbuilt themes and no black themes. But inbuilt themes uses nice icons to make it look simple and neat. I shall post pics of the screens. Settings now show the lab features directly to play around with fake location( never got it working though ). As of now calls and Volte working fine. Haven't been successful in making video calls over LTE with Zui Roms.
Need some help in getting a cloud storage to upload the file.
If someone could help me, would be happy to upload it for the benefit of the community. Again ***** Please do install it at your own risk, make sure you backup in TWRP before you flash this ROM , the size is 1.6 GB. ***** All thanks to the Chinese forums BBS.lenovomobiles.

Screenshots
These are the screenshots
And you can download the file from :
https://drive.google.com/file/d/0B6GiX9_gwfCqVXVhRHcyVEdfbkU/view?usp=sharing
Make sure you backup in TWRP, Please use the Chinese version of the TWRP to flash this file,

More screenshots please ??

Some bugs ? Any way to go back to Android 6? After flashing this ROM TWRP still working?
Отправлено с моего Z2 Pro через Tapatalk

Bugs
raber111 said:
Some bugs ? Any way to go back to Android 6? After flashing this ROM TWRP still working?
Отправлено с моего Z2 Pro через Tapatalk
Click to expand...
Click to collapse
Following are the bugs I have noticed
1. Vibration stops working, a reboot will be needed
2. Manual mode in the Camera gives a red tint in faster shutter speeds
3. No Root, haven't been able to root it, maybe I am doing it wrong. Flashing the Superuser in TWRP makes the sim card go an undetected state.
4. No options to set a live wallpaper ( Google Pixel wallpaper with animation ). Figured out a way to fix it by using the app shortcut maker to set a shortcut for the live wallpaper picker.
5. Battery seems to be draining faster.
Will keep adding can't complain as it is a dev version.

anupsnair said:
Following are the bugs I have noticed
1. Vibration stops working, a reboot will be needed
2. Manual mode in the Camera gives a red tint in faster shutter speeds
3. No Root, haven't been able to root it, maybe I am doing it wrong. Flashing the Superuser in TWRP makes the sim card go an undetected state.
4. No options to set a live wallpaper ( Google Pixel wallpaper with animation ). Figured out a way to fix it by using the app shortcut maker to set a shortcut for the live wallpaper picker.
5. Battery seems to be draining faster.
Will keep adding can't complain as it is a dev version.
Click to expand...
Click to collapse
So TWRP still working after flashing?
Gapps working?
Отправлено с моего Z2 Pro через Tapatalk

I'm not able to flash it via chinese TWRP. I've also tried TWRP from Emmaus. If someone can share a working recovery with this ROM I'll tell you my opinion about it. (Error 7 is the problem).

raber111 said:
So TWRP still working after flashing?
Gapps working?
Отправлено с моего Z2 Pro через Tapatalk
Click to expand...
Click to collapse
TWRP works fine, just that I wasn't able to root it, Gapps not required, as I installed the Google sync app and the Google contacts previously on the 2.3.044 build since I did a dirty update, got the play store and the Google contacts in tact

cyBeRdUdE-9 said:
More screenshots please ??
Click to expand...
Click to collapse
Hi Cyberdude,
Is there any specific screen that u are looking for?

anupsnair said:
Hi Cyberdude,
Is there any specific screen that u are looking for?
Click to expand...
Click to collapse
Screens of any major UI changes ??

Hey I was on CM13 By Emmaus, did a TWRP backup.
Flashed the Chinese TWRP.
Wipe -> Flashed the Android 7 ZUI -> Used it for a day and wanted to go back to CM13.
I flashed the TWRP By Emmaus-> Restore-> Now the phone doesnt go past the ZUK logo with the blue LED light.
What do you think needs to be done to restore the TWRP backup and go back to CM13?
Edit: Solution: I had QFIL to 1.9 then flash Emmaus Recovery and restore.

Root Zuk Z2pro Android 7
Hi All,
For those who need to root this ROM, you can flash the following file from twrp it's a modified version of SU,

anupsnair said:
Hi All,
For those who need to root this ROM, you can flash the following file from twrp it's a modified version of SU,
Click to expand...
Click to collapse
I've flashed just the last version of SuperSu beta, no modify version needed in my option because is working like a charm!
Sent from my Z2 Pro using Tapatalk

lucaam said:
I've flashed just the last version of SuperSu beta, no modify version needed in my option because is working like a charm!
Sent from my Z2 Pro using Tapatalk
Click to expand...
Click to collapse
Thank you Lucaam, for the benefit of the forum can you please post a link, when I flashed SU, the sim in my phone stopped working.

Here's to you the link https://download.chainfire.eu/750/SuperSU/BETA-SuperSU-v2.64-20151220185127.zip?retrieve_file=1 of to the file that I've downloaded. I flashed it after the first full boot.
Sent from my Z2 Pro using Tapatalk

syedtahir16 said:
Hey I was on CM13 By Emmaus, did a TWRP backup.
Flashed the Chinese TWRP.
Wipe -> Flashed the Android 7 ZUI -> Used it for a day and wanted to go back to CM13.
I flashed the TWRP By Emmaus-> Restore-> Now the phone doesnt go past the ZUK logo with the blue LED light.
What do you think needs to be done to restore the TWRP backup and go back to CM13?
Edit: Solution: I had QFIL to 1.9 then flash Emmaus Recovery and restore.
Click to expand...
Click to collapse
hey dude, i had same problem, i couldn flash any rom through twrp, nor could i recover any backup.. then i saw your post, i could hardly flash 1.9 firmware, but even then, and even with locked or unlocked bootloader, i could neither update through official firmware update process (OTA) nor could i flash anything through any recovery, it stucks on updating/flashing system image unconditionaly.. so something strange happens when flashing 7.0, so you cannot go back anyway. May you could help. Its just so anoying that i cant restore my backups, cant install any custom rom, official rom, only qfil works but dont solves any problem.
thanks in advance
Ikram

ikram.senguen said:
hey dude, i had same problem, i couldn flash any rom through twrp, nor could i recover any backup.. then i saw your post, i could hardly flash 1.9 firmware, but even then, and even with locked or unlocked bootloader, i could neither update through official firmware update process (OTA) nor could i flash anything through any recovery, it stucks on updating/flashing system image unconditionaly.. so something strange happens when flashing 7.0, so you cannot go back anyway. May you could help. Its just so anoying that i cant restore my backups, cant install any custom rom, official rom, only qfil works but dont solves any problem.
thanks in advance
Ikram
Click to expand...
Click to collapse
I"m not certain about other backups. But I had a CM13 TWRP backup.
What I did was:
QFIL to 1.9. This should work irrespective of what recovery you have. This is like an absolute reset. Once this is done, let your phone reboot and load once.
Then adb reboot bootloader
In the bootloader mode -> Flash the recovery ( You will need to flash Emmaus recovery if you are going back to CM13).
Once flashed. You can wipe the data,system and cache. Install CM13 and you should be all set.
You could also wipe and restore any old CM13 Backup too. Hope this helps.

SOLVED
SOLVED: HOW? STRANGE!
i did everything exact same as at home, but somehow ..just somehow ..it didnt ****ed itself and didnt stuck on everywhere and indeed succeeded flashing every f****** rom!
so here a step-by-step (if some ever expirience same) thanks to you all which i can confirm:
1. flash 1.9.104 rom through qfil (let it boot..)
2. enable usb debuging through enabled developer settings
3. boot in fastboot (adb reboot bootloader) unlock bootloader with your unlock_bootloader.img (fastboot -i 0x2b4c flash unlock unlock_bootloader.img) right after that unlock it (fastboot -i 0x2b4c oem unlock-go) forreal
4. reboot, then enable usb debuging again and boot in fastboot again (adb reboot bootloader)
5. flash emmaus TWRP (fastboot flash recovery recovery.img) DO !NOT! USE ---> [fastboot -i 0x2b4c boot recovery.img] <--- CODE!
6. boot to TWRP, wipe data/cache/dalvik-cache (system not needed, better dont wipe system to be sure)
7. flash AICP, RR or CM13 .zip, NOT ANY OTHER (https://emmaus.pro/?dir=Zuk Z2 Pro & http://forum.xda-developers.com/zuk-z2-pro/development/rom-aicp-11-0-mm-6-0-1-unofficials-t3499283) those work for sure on emmaus TWRP
8. reboot, DONE
to every single zuk z2 pro user out there, please make sure your PC, USB PORT, USB-CABLE is working right, because even if everything seems right, under the hook its sometimes not. In my case, i knew it, but could not believe it since qfil showed me SUCCSESS in every section, the connection betweet cable and usb port was faulty, thats the only possibility. THANK YOU ALL VERY MUCH, this was one of the most HARD-BRIKS ive ever experienced, and ive been through S2, S3, S4, S5, S6, HTC ONE M7 hard-bricks.. so.. yeah!!! THANK YOU VERY MUCH :')

i try this zip on my twrp , but my phone are dead don't run anybody else
what i can do ?

Many thanks to you ! the flash worked very well. i had same issues here . best description ever many many thanks !!

Fix soft-bricked(cannot enter any recovery, nor boot) Blu Vivo XL

From stock Blu vivo XL MM and tWRP2.87 for MM (https://forum.xda-developers.com/vivo-xl/development/cm13-0-2-3-18-19-twrp-t3530909), I flashed one Android N ROM in this forum, it gave me bootloop, and could not enter recovery. It took me a lot of flashing work to make it up and running now. I'd like to summary what I did.
1, Using SP Flash tool, tried all recoveries I found, none of them let me enter it by pressing VOL+ & PWR buttons. Recoveried I've tried:
tWRP for MM / Philz Touch V2 [Marshmallow] / stock 5.1 recovery / tWRP for 5.1
2, Found SP-Flashable Gionee ROM from here: https://firmwarefile.com/gionee-s-plus
Download old version i.e. _T6006.zip which is Android 5.1. Don't use latest MM ROM since that won't work for our procedure.
Use SP Flash tool to flash it
Now Blu Vivo XL can boot to Android with Gionee logo, but as expected, no SIM detected since Gionee has different modem file.
3, Use SP Flash tool to flash tWRP for 5.1
https://forum.xda-developers.com/vivo-xl/development/recovery-t3311601
Make sure you can boot into this tWRP by pressing Vol+&PWR buttons
4, Download Blu Vivo XL stock 5.1 tWRP backup from here:
https://www.dropbox.com/s/x4lgfv27jtgirkh/Blu_VivoXL_backup-2016-03-05.zip?dl=0
I use this one instead of popular one in this forum because, this backup has MODEM backup data.
5, Use tWRP to restore Blu Vivo stock ROM. Now you can boot to it.
6, Use SP Flash tool to flash Blu Vivo XL stoch 5.1 recovery
7, Boot again, do OTA 3 times to get latest stock ROM (build version V08)
8, Use SP flash tool to flash tWRP2.87 for MM :
https://forum.xda-developers.com/vivo-xl/development/cm13-0-2-3-18-19-twrp-t3530909
9, Enter tWRP for MM, flash suspersu zip file
10. Now you have stock latest ROM rooted.

TWRP does not recognize backu do I unzip file ? Where do I put it ? There are two files in zip do I put em together? Thanks any help would be greatly appreciated

joeeboogz said:
TWRP does not recognize backu do I unzip file ? Where do I put it ? There are two files in zip do I put em together? Thanks any help would be greatly appreciated
Click to expand...
Click to collapse
You only need the on with more files. Unzip them, put all files into your phone folder(last part can be other string but no hurt to use it as is):
\TWRP\BACKUPS\BLU_VIVO_XL\2016-02-12--04-36-53_S_plus\

min1968 said:
You only need the on with more files. Unzip them, put all files into your phone folder(last part can be other string but no hurt to use it as is):
\TWRP\BACKUPS\BLU_VIVO_XL\2016-02-12--04-36-53_S_plus\
Click to expand...
Click to collapse
I have successfully backed up thank u but it's not detecting sim for some reason. Do I wipe before restoring or just restore over Gionee firmware

joeeboogz said:
I have successfully backed up thank u but it's not detecting sim for some reason. Do I wipe before restoring or just restore over Gionee firmware
Click to expand...
Click to collapse
You should use 5.1 tWRP to restore from this. It has 2 zip folders, unzip them, use the one with more files. it has 11 files total.
https://www.dropbox.com/s/x4lgfv27jt...03-05.zip?dl=0

Thanks! Your guide saved my phone from being a soft brick.
But this TWRP version seems very odd, it thinks my phone is a V2 Viper and this recovery is ugly and seems misbehaving. Is there maybe a newer version that will work with MM? (3.0.1 gave me a bootloop.)

So many thanks for all your effort with this post, you save my life and my aunt´s phone jajaja.

[ROM] [STOCK] [08-Mar] TWRP flashable Stock ROM [v340]

Code:
[B]NOTE : [/B]PROCEED AT YOUR OWN RISK. Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues.
If already on Stock Rom then visit THIS THREAD for OTA updates.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - TWRP_Stock_v340.zip from this post.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
Users coming from Android Pie reported microphone issues - in case you face it then flash DolbyPlus-Oreo_8.1.zip from THIS post via Magisk which might resolve the issue.
(optional) If you want to boost up by debloating then use this MOD.
(optional) If you want to boost up BATTERY then use this GUIDE.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP : https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.

To ROOT the ROM
Flash Magisk from TWRP and you will have root access

Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......

piku2008 said:
Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......
Click to expand...
Click to collapse
Did you performed factory reset and flashed ROM & decrypt.zip
The TWRP survives the flash and Magisk can be flashed to Root the ROM but after above two files are flashed.

Well I successfully flashed ROM after complete factory reset with internal memory tooo ......
But some how TWRP got replaced with factory default (the one with root checker) with bootloader unlocked screen

Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available

Aftab_khatri said:
Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available
Click to expand...
Click to collapse
Will do

Thank You bro.. Your Guide has tested successfully from AOSiP build to stock ROM 309.. [emoji16]
Sent from my [device_name] using XDA-Developers Legacy app

AOSP to Stock
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...

jroviel18 said:
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...
Click to expand...
Click to collapse
Great .. Sorry could not reply earlier but you got the resolution of the query.
For subseqeunt update with TWRP intact .. please follow this guide in future .. https://forum.xda-developers.com/as...to/rom-update-stock-firmware-keeping-t3808269

Update - WW-15.2016.1805.311
Updated Stock ROM file - TWRP_Stock_v311.zip now avaliable.
For those who are already on stock ROM,
The instructions to flash are in THIS POST.
For those who are on custom ROM,
The instruction to flash are in THIS POST

Do these zips format internal storage or not ??

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
No

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
I believe this is the exact same firmware as the official one. It is just modified to work with TWRP. Nothing more, nothing less.

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
You will have to format data (i.e. factory reset) but the Internal Storage will be safe.

aaa
Work For Max Pro M1 ?
This rom XOOT not XOOTD
---------- Post added at 11:26 AM ---------- Previous post was at 11:07 AM ----------
.A.V.i.n.a.S.h. said:
Code:
[B]NOTE : [/B]Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues. BUT still proceed at your own risk.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - Stock_X00T_Patch_May_Version_311_TWRP.zip.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
This will update your firmware to WW-15.2016.1805.311 to have updates after this follow THIS THREAD.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
Click to expand...
Click to collapse
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english

arielrizuly said:
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english
Click to expand...
Click to collapse
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.

.A.V.i.n.a.S.h. said:
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.
Click to expand...
Click to collapse
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.

Abby 244 said:
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.
Click to expand...
Click to collapse
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.

.A.V.i.n.a.S.h. said:
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.
Click to expand...
Click to collapse
No response even in fastboot.