Related
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440
I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.
calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck
dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!
Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas
I have a G3 wizard. I was stupid and trying to go from button's ROM to Crossbow reloaded. The flash ended up crashing somewhere in the 80% range. Now my wizard will rarely get into bootloader mode. I'm leaving the battery out for 5 minutes at a time. When I put it back in it will go into bootloader mode until I plug the USB cable in it and try to flash it the screen comes goes grey and I get a 260 update error..
I really hope I didn't brick this thing, It's my only connection and I have some important new job related calls to make!
mine is stuck on the flash screen
i have a g3 wizard and today it would not get past the windows mobile 6 professional splash screen (tnt rom). is there anything i can do. i tried reflash it but could not establish a connection. please help
tarusdg said:
i have a g3 wizard and today it would not get past the windows mobile 6 professional splash screen (tnt rom). is there anything i can do. i tried reflash it but could not establish a connection. please help
Click to expand...
Click to collapse
Try holding the camera button while powering it on. Then put in the usb cable and flash away.
tarusdg said:
i have a g3 wizard and today it would not get past the windows mobile 6 professional splash screen (tnt rom). is there anything i can do. i tried reflash it but could not establish a connection. please help
Click to expand...
Click to collapse
Do a Soft reset of the phone,if it works out,fine,otherwise do the Hard reset,although you might lose your personal data but phone will work out.
If both do nothing and it still gets stuck,then there's no other way except to reflash.
Which connectivity your not getting,If you are saying about Activesync connectivity,then you don't need Activesync connectivity to flash,get your phone into Bootloaders(multicolor screen) connect it to your pc via usb cable,when usb appears at the bottom of the bootloadermode,flash the Rom.
But if you cannot establish connectivity through usb cable,then either your usb cable is faulty or the mini usb port of the phone is damaged.
Looks like i've been threadjacked...can anyone help?
Hi there, I reset my Tilt to factory settings yesterday and now when I plug it into my computer it does not detect anything.
The phone does charge, so I know that the connection is there.
I've had this problem before but I can't remember what exactly it is that I did to fix it. I've searched the forum and I can't find anything helpful either.
Anyone know what I need to do to fix this?
Thanks!
jerryjohn said:
Hi there, I reset my Tilt to factory settings yesterday and now when I plug it into my computer it does not detect anything.
The phone does charge, so I know that the connection is there.
I've had this problem before but I can't remember what exactly it is that I did to fix it. I've searched the forum and I can't find anything helpful either.
Anyone know what I need to do to fix this?
Thanks!
Click to expand...
Click to collapse
Go to settings> connections > usb to pc> and uncheck advanced network functionality or enable faster data sync, Whatever it says.
hello,
i've got the same problem, did what you said, but it doesn't work...
and i need the mobile device center connection to flash my tytn! ;-)
mdbq said:
hello,
i've got the same problem, did what you said, but it doesn't work...
and i need the mobile device center connection to flash my tytn! ;-)
Click to expand...
Click to collapse
You should be able to flash using your micro SD.
ChumleyEX said:
You should be able to flash using your micro SD.
Click to expand...
Click to collapse
............but unfortunately you need to initially flash Hardspl thru your PC, from then on everything can be done through the SD card.
details details..
Have you tried another cable?
hi, i got this problem tu. i plug in the usb cable, but nothing appeared on my computer.id doesnt say it detected anything (usually it says found new hardware). i tried with several usb cables.still the same. but the phone is charged with all those cables i tried.
Yeah tried it and still got nothing. I am so stuck on what it could be.
I've tried 3 different cables and still have nothing. It worked a couple days ago, but ever since I reformated my phone it stopped working.
I don't understand why my computer doesn't automatically detect it as it did in the past.
reformat it again?
/grasp at straws
My tilt is doing the same thing. 2 days ago I was updating it and when I connected it to the computer nothing happened. Yesterday I tried flashing a new rom, thinking it would wipe it clean and make it connect again, however, it did not work. I am at a loss. Any ideas?
did hard reset and still unable to detect my phone.i'm using G.DK. ROM
i still have the problem
i trized a lot of cables, but from now the computer even don't say that it an unknown plyg is, he simply doesnt detect it. i'm just able to charge my phone, that's it
and in fact i just wanna put the official french rom on it because it's in dutch, i'm bilingual but it's more pleasant to have my phone in my mother language!
tahnks all of you for your help!
denco7 said:
Go to settings> connections > usb to pc> and uncheck advanced network functionality or enable faster data sync, Whatever it says.
Click to expand...
Click to collapse
Hmmm, this is starting to smell more than fishy with more and more complaints popping up... Just wiped out my laptop thinking it was an update that killed activesync; complete wipe and still no connection; every and any other type of usb cables connect flawlessly from camera, psp, ds, dsi, usb plug in all work no prob; yet kaiser refuses to sync even with new cables before and after activesync updates
Try a different PC if possible. Make sure Active Sync or Mobile Center is installed prior to plugging it in.
Another one
--DELETE THIS POST-- I added to it, then accidentally double-posted.
Another one
I'll add to the pile. Exact same problem. ActiveSync doesn't work, but phone does charge. Various cables used, hard reset done. Haven't yet flashed a new ROM, though. I'm using an HTC official 6.1.
Last successful run of ActiveSync was May 8th. I used System Restore on my PC to pre-date May 8th. Still nothing.
Didn't make any major installations to either the PC (XP SP3) or the Tilt on or around that date. It just...stopped working.
All other functions seemed to work normally, except that I got an alert from QuickGPS that it hadn't been updated since that date. I was able to update that successfully.
Same problem on my fathers tytn II... probably HW prob. Will look into it...
igord said:
Same problem on my fathers tytn II... probably HW prob. Will look into it...
Click to expand...
Click to collapse
Yep, it's definitely a hardware issue with the Kaisers usb port not fully connecting; I pushed the usb bar in a bit with the back end of the stylus and presto! Connected immediately
I'll also confirm success by the use of a little bit of brute force. Back end of stylus, a little manipulation, connect, and the "ba-DING!" sound in XP. Wish I'd done that before a hard reset...
Hi all,
Since a week I can't use active sync, or acces my drive (Diamond Touch)
Battery charging as normal, I tried other mini USB cable, 3 computers, reinstalled active sync (4.5) Also tried different ROM's , hard reset. So I thought the connector is broken or something and went to a store where they repair PDA and stuff. The man told me that the connector was fine and his idea was the hardware port is damaged. Anyone who had the same, or maybe something else what can help me.
I guess I need T mobile Rom before I send it back for warrenty.
Thx in advanced...
can you access drive on the computer or on the phone as well?
Did you hard reset and clear storage as well?
Don't forget to put HSPL back as well if your sending it back
Hi thx for the reply, yes i can acces it on the phone, not computer. And yes i got the original from Tmobile( ugly skin!) Got download it with Wifi. so i guess im pretty save for the warranty.
I recently purchased a wizard/mda (tmobile) and have run into major problems trying to unlock and upgrade the device.
This forum is a wealth of information, but I have hit some major problems.
The main problem is being unable to unlock it.I researched various posts around here, and have not been able to get activesync working.I looked at various troubleshooting info from microsoft and around here as well and have not been able to sync the phone with my computer.
I thought that perhaps it may have something to do with the version of xp I have installed, after spending many hours (25+) trying to get it to work.I then tried on another couple of comps and still no luck.
I am beginning to suspect that the phone itself has a technical problem.I seen the workaround for transferring cab files between the comp and the phone, and am hoping that once I have a mini sd card there is some way to upgrade wm5 on the phone.Can I unlock the phone without syncing it, using a different technique?(perhaps bluetooth or ir?)
Looks like I will have to unlock the phone using an unlock code, without syncing to the computer, but I am looking for any and all suggestions that may help out. I even tried attaching files and emailing them to myself, but wm5 doesn't support attachments.
Throw a dog a bone, before he buries this phone!
nachismo said:
I am beginning to suspect that the phone itself has a technical problem.I seen the workaround for transferring cab files between the comp and the phone, and am hoping that once I have a mini sd card there is some way to upgrade wm5 on the phone.Can I unlock the phone without syncing it, using a different technique?(perhaps bluetooth or ir?)
Click to expand...
Click to collapse
Im not an expert into this - all I can give you is couple of general ideas - maybe something you already knew but I'll give it a try
IMHO flashing via BT or IR can't be done or could be very risky.
Did you try hard reset? No change? Did you try hard reset and then skip installing those cabs that are installed automatically after HR?
You could try to download software WM5Storage into your htc, install it, activate and then you can access your phone as USB mass storage device from your PC. I've used it with my SD card only but it looks as it could use internal memory of your phone too. With this you can check if the data can be transfered via the mini USB.
Does your PC see the phone? Saying something like "installing new device drivers" or something like that. Check device manager.
Can you charge the battery in your phone from usb?
Btw I can't remember exact process of unlocking/flashing - is it really necessary to have synced the device before unlocking/flashing?
Following up.....
Thanks for the ideas, MuF123.
Some time has gone by.....
I tried the hard reset, and that didn't make a difference.
I was able to sync via bluetooth using a friends laptop, but was unable to sync via usb on the same computer or on my own.
I installed WM5storage and my computer doesn't see it as a mass storage device, even though it charges the phone via usb.
I am looking at this:internal error 2356 activesync.cab that comes up when I try repairing activesync, but it was a dead end the first time around.(maybe the answer is deeper there somewhere?)
I really like the phone alot, i think i will try picking up some external memory, and see if i can't use one of those unlocking services to get it up and working with a local cellular provider.
Thanks,
Nacho