I flashed Micromax Canvas A1 AQ4501 KPW53 using sp flash tool and stock rom. It was working earlier. Bootloader was unlocked. It showed success after 100% completing the process. Now it is fully dead not charging also... I tried all method but still dead yet.... Please reply me anyone ...how to unbrick. I tried various versions of SP F tool and stock ROMs ,it shows progress from 0 to 100% and the sound of connection and disconnection are proper when I connect the phone and disconnect. Flashing is occurring successfully but the phone is showing no sign of life. Only sound is heard when connected and disconnected to pc
How to unbrick it?
Please reply
Rohitdahiya said:
I flashed Micromax Canvas A1 AQ4501 KPW53 using sp flash tool and stock rom. It was working earlier. Bootloader was unlocked. It showed success after 100% completing the process. Now it is fully dead not charging also... I tried all method but still dead yet.... Please reply me anyone ...how to unbrick. I tried various versions of SP F tool and stock ROMs ,it shows progress from 0 to 100% and the sound of connection and disconnection are proper when I connect the phone and disconnect. Flashing is occurring successfully but the phone is showing no sign of life. Only sound is heard when connected and disconnected to pc
How to unbrick it?
Please reply
Click to expand...
Click to collapse
Do you have proper adb/MTK device drivers installed in pc or laptop ? Is it seen in device manager in pc ? And try to work in windows xp rather than windows 7 or newer version
Thanks for the replies
I tried all available versions of SP tool but stil no luck. I am using windows 8.1. All unsigned drivers installed. KPW53 is the s/w version of my a1. If someone is having experienced the same and was able to recover, I am awaiting the response
Related
hi
i was updating my phone with standard method with lg program.. (without downloading kdz file separately)
but an error occurred in 15% , " ..
"problem communication between cell and phone"
and my phone has locked in s/w upgrade mod and don't turn on.. even if i put the battery off and insert it again it turn on , in s/w upgrade mod...
please help..
If it's still at 15 % it shouldnt even have started flashing U are lucky so to say
Just pull out USB and battery, wait a few seconds and restart. Then try to install the latest drivers, maybe run it as admin or another PC if available.
If it's stuck in bootloop, try emergency recovery in B2C tool (LG update tool), or read in my noob how to, how to unbrick devices.
Also this thread needs to be in Q&A
I was using 64bit PC and had the same problem then I used another PC and the problem was gone
Had the same problem. Resolved using emergency recovery in LG tool, but using another pc.
Sent from my LG-P970 using XDA
Please my xperia z is bricked and i havnt used for over a week now,
i installed pc companion on my pc, it detected an update for my phone, i accepted the update, my phone powered down to install the update, and it got stuck there, refused coming back on, i have tried contacting sony customer service, they gave me some procedures which i have followed to the letter, i have used the pc companion to repair but it tells me there is no update for my phone or sometimes it would tell me update engine could not update your device (error 100), i have also tried using flashtool as well and it gave error, my phone is down and if i power it on it tells me update failed, make sure the phone is connected to a computer and try again,
i have tried all the repair/update procedures known to me several times, disabled my antivirus and firewall, attached is an error i got while using the flashtool...
the phone was rooted with a locked bootloader...
any solution would be highly appreciated..
Don't Upset........!!
Change your PC USB port..!! (im using 2.0 port)
then Cleen
C:\Flashtool\firmwares
folder
IT work's for me..!!
:good::good::good:
Hi,
I have Micromax Canvas Turbo a250 and it is stuck at boot.
I was trying to install kitkat rom and in TWRP mode i got the error E:A request to render failed.
After full Wipe from TWRP i am getting no os available. Now the problem is my phone is not showing up on my pc and laptop. Om LAptop i have win 8.1 and pc win xp.
Doenloaded lots of sowtware and watched many youtube videos but not able to connect my phone to either of my laptop and pc.
Please help used sp tools but it is also not detecting my phone ?
Am i missing something ? tried adb interface connection but my phone is not listed in device manager not even yellow ballon is coming ?
PLEASE HELP NEED TO FIX IT ASAP ALL YOU GENIUSES OUT THERE ?
While I was flashing Original MMX A250 ROM Through sp Flash Tool Suddenly Power was Cutted N From Then I my phone Is Not Showing Charging Indicator N Unable To Power Up And So Tool Is Not Detecting My Phone... I have used Various Tips Like Reinstalling Vcom n mobistyl drivers but isnt working out for me plz Help...
i think i have also bricked my mmx a250
Have you solved the issue? Cheers
i was on lineage os, but after that i flash stock firmware 5.1 thrgh command prompt. all done well and device booted after that i got security patch upadate 2016. while installing that update in recovey mode my phone goes off. after that i cant boot mobile i think its hard brick. i am unable to open bootloader too. tried all key combination but nothing happn when i connect phone to pc no devices detected but somtimes green light blink. on phone. i have installed all driver i.e adb and motorola and qualcomn one. but unable to detect device on pc . anyone know solution plz hlp meee. my devices is xt1052 retail asia
manoj3101 said:
i was on lineage os, but after that i flash stock firmware 5.1 thrgh command prompt. all done well and device booted after that i got security patch upadate 2016. while installing that update in recovey mode my phone goes off. after that i cant boot mobile i think its hard brick. i am unable to open bootloader too. tried all key combination but nothing happn when i connect phone to pc no devices detected but somtimes green light blink. on phone. i have installed all driver i.e adb and motorola and qualcomn one. but unable to detect device on pc . anyone know solution plz hlp meee. my devices is xt1052 retail asia
Click to expand...
Click to collapse
You cant install that update while you were using roms, check videos about to revive the moto x from hard brick
YedanyXD said:
You cant install that update while you were using roms, check videos about to revive the moto x from hard brick
Click to expand...
Click to collapse
found one video but when he connect device somthing like hqsusb appers. but in my case nothing happn when i cnnt device to pc. if u find any hlpful video plz provide me link