i was on lineage os, but after that i flash stock firmware 5.1 thrgh command prompt. all done well and device booted after that i got security patch upadate 2016. while installing that update in recovey mode my phone goes off. after that i cant boot mobile i think its hard brick. i am unable to open bootloader too. tried all key combination but nothing happn when i connect phone to pc no devices detected but somtimes green light blink. on phone. i have installed all driver i.e adb and motorola and qualcomn one. but unable to detect device on pc . anyone know solution plz hlp meee. my devices is xt1052 retail asia
manoj3101 said:
i was on lineage os, but after that i flash stock firmware 5.1 thrgh command prompt. all done well and device booted after that i got security patch upadate 2016. while installing that update in recovey mode my phone goes off. after that i cant boot mobile i think its hard brick. i am unable to open bootloader too. tried all key combination but nothing happn when i connect phone to pc no devices detected but somtimes green light blink. on phone. i have installed all driver i.e adb and motorola and qualcomn one. but unable to detect device on pc . anyone know solution plz hlp meee. my devices is xt1052 retail asia
Click to expand...
Click to collapse
You cant install that update while you were using roms, check videos about to revive the moto x from hard brick
YedanyXD said:
You cant install that update while you were using roms, check videos about to revive the moto x from hard brick
Click to expand...
Click to collapse
found one video but when he connect device somthing like hqsusb appers. but in my case nothing happn when i cnnt device to pc. if u find any hlpful video plz provide me link
Related
i try to flash my device but fast boot recovery bricked now i cant open droid boot or android Os. when i try to power on device an USB logo show in the screen and device powered off in 1 second. in my device connect to computer via USB cable ,USB logo remain in screen for a few minutes. fastboot and adb cant find my device. any one can help me?? tanks
Sorry for the Long wait
I hope u receive this before going off to buy a new tablet.Or did u send it to Asus warranty and did they give u a new one for free.(Plzz reply and tell me. Also I found this procudure in how to get adb and fastboot to work again. Go to this fourm http://forum.xda-developers.com/memo-pad-7/general/howto-unbrick-hardbricked-memo-pad-t3105945 and follow the instrucftions. it works with the me170cx well but with other versions not so much. i'm going to try this and hopefully this works:laugh:
Does anyone know how to unlock me170c bootloader and have custom recovery installed?
Bricked Asus Me70cx
I am having the exact same problem. Tried using Intel flash tool and keep getting windriver error timeout. I have tried starting flash before usb screen comes and waiting for screen to load. I have loaded all usb drivers like other post state and still can't get tablet working. Please someone help!
My moto x will not start, does not fall even in fastboot mode. my computer not recognize it. I was in kitkat 4.4.4 and was installed by the ota fastboot 5.0.2 (first) and suddenly the phone number is off and there does nothing but nothing I could do to get the full brick ??
kayserxx said:
My moto x will not start, does not fall even in fastboot mode. my computer not recognize it. I was in kitkat 4.4.4 and was installed by the ota fastboot 5.0.2 (first) and suddenly the phone number is off and there does nothing but nothing I could do to get the full brick ??
Click to expand...
Click to collapse
Could you be more specific? what did you do? you were on stock 4.4.4? then what did you do? you flashed the 5.0.2 from fastboot by your self? or it was an OTA notification for the upgrade? did you root your phone before? did you make any changes to the stock firmware? Is your Moto X's bootloader is unlocked? Remember always be specific when posting about your problem mate it would be helpful for others to solve your problem quickly.
Yep, you need to be a bit more specific of what exactly happened.
Does a qualcomm device appear in your device manager under windows?
dagoban said:
Yep, you need to be a bit more specific of what exactly happened.
Does a qualcomm device appear in your device manager under windows?
Click to expand...
Click to collapse
had the soak test 5.0.2 v38, turned to kitkat 4.4.4 to do a clean install, but does not grab me the ota 5.0.2 from kitkat, it occurs to me flash the gpt of the soak test and nothing, turned to download first soak test and grab the ota, when they were installing the phone was in black, pin attempt, enter fastboot mode but does nothing that is black screen. on the pc (I have windows xp no qualcomm device in device manager)
kayserxx said:
had the soak test 5.0.2 v38, turned to kitkat 4.4.4 to do a clean install, but does not grab me the ota 5.0.2 from kitkat, it occurs to me flash the gpt of the soak test and nothing, turned to download first soak test and grab the ota, when they were installing the phone was in black, pin attempt, enter fastboot mode but does nothing that is black screen. on the pc (I have windows xp no qualcomm device in device manager)
Click to expand...
Click to collapse
So you tried to downgrade the BL and GPT file?
Have you installed all drivers? Also try this: Press Vol down and Power button for at least 120 seconds! It must be at least 120
kayserxx said:
had the soak test 5.0.2 v38, turned to kitkat 4.4.4 to do a clean install, but does not grab me the ota 5.0.2 from kitkat, it occurs to me flash the gpt of the soak test and nothing, turned to download first soak test and grab the ota, when they were installing the phone was in black, pin attempt, enter fastboot mode but does nothing that is black screen. on the pc (I have windows xp no qualcomm device in device manager)
Click to expand...
Click to collapse
Its already been posted everywhere in the Moto X development never ever downgrade your BL. and you are not mentioning the proper information.. Please elaborate properly. And yes download the Motorola drivers... Install them restart your pc and then connect your phone with pc and see if something happens also follow what @dagoban said...
Sent from my XT1058 using Tapatalk
@kayserxx any news on your side?
dagoban said:
@kayserxx any news on your side?
Click to expand...
Click to collapse
not the truth, bring it to a technical service and they said they do not recognize the pc, just turn on a green light
my pc does not recognize, have all installed driver not I manage to get lucky to revive
is that many are in the same plan in which I walk, so if you help me to solve this, could help more people
kayserxx said:
not the truth, bring it to a technical service and they said they do not recognize the pc, just turn on a green light
my pc does not recognize, have all installed driver not I manage to get lucky to revive
is that many are in the same plan in which I walk, so if you help me to solve this, could help more people
Click to expand...
Click to collapse
Sorry, I'm having some problems understanding your English. Do you mean you already brought your phone to an authorized Motorola Service Station and they couldn't help you? If you can't get the phone displayed in the device manager as qualcomm device then there is nothing you can do. Make sure you really have all the drivers correctly installed, try another PC etc.
kayserxx said:
had the soak test 5.0.2 v38, turned to kitkat 4.4.4 to do a clean install, but does not grab me the ota 5.0.2 from kitkat, it occurs to me flash the gpt of the soak test and nothing, turned to download first soak test and grab the ota, when they were installing the phone was in black, pin attempt, enter fastboot mode but does nothing that is black screen. on the pc (I have windows xp no qualcomm device in device manager)
Click to expand...
Click to collapse
So you have installed 5.02, then tried to downgrade to 4.4.4, and now your phone has a black screen, and device manager on your PC does not list/see the phone?
KidJoe said:
So you have installed 5.02, then tried to downgrade to 4.4.4, and now your phone has a black screen, and device manager on your PC does not list/see the phone?
Click to expand...
Click to collapse
exact, not take, does not enter fastboot mode, my pc does not recognize it, tried it on windows xp and windows 7, windows are both 32bit and nothing
kayserxx said:
exact, not take, does not enter fastboot mode, my pc does not recognize it, tried it on windows xp and windows 7, windows are both 32bit and nothing
Click to expand...
Click to collapse
Plug it into an AC adapter. Leave it connected (and hopefully charging) over night.
Press/hold the power button until the phone vibrates. Then try connecting it to the PC.
My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!
Maybe died flash boot
Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?
Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so
Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you
hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.
Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.
Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it
Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.
same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.
my moto g 2014 has unlocked the boot loader and installed cyanogenmod and is android 4.4
i want to install the stock rom of moto g 2014 and installed the motorola device manager on my pc and downloaded the firmware and all set
but when i turn my handset into bootloader and connected to pc ,it does not recognising my phone...
on my phone there is no change in the status of "connect usb cable"
what should i do now ???
:crying:
rahuldravid said:
my moto g 2014 has unlocked the boot loader and installed cyanogenmod and is android 4.4
i want to install the stock rom of moto g 2014 and installed the motorola device manager on my pc and downloaded the firmware and all set
but when i turn my handset into bootloader and connected to pc ,it does not recognising my phone...
on my phone there is no change in the status of "connect usb cable"
what should i do now ???
:crying:
Click to expand...
Click to collapse
Im with a similar probem but i think i can help U. Did U enabled debbuging after install of lineage?
Have U tried to unistall install again/
Download Google's ADB and Fastboot. Turn off the phone. Hold Power+Vol Down for two seconds, then release at once. Plug into computer. Open a terminal.
Code:
$ fastboot devices
If you don't get anything or you get "unauthorized" you need to fix your drivers.
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
I can help you, just visit my blog
tickernel.tk
Present status
QbaQbaPL said:
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
Click to expand...
Click to collapse
Is it solved? I am also facing same problem.
BiswashKoirala said:
Is it solved? I am also facing same problem.
Click to expand...
Click to collapse
I am facing the same problem as well. Can anybody help pls??
No..I tried few solutions but the phone was still dead. So I bought a new phone.