Full Brick On My Moto X - Help Plz - Moto X Q&A

My moto x will not start, does not fall even in fastboot mode. my computer not recognize it. I was in kitkat 4.4.4 and was installed by the ota fastboot 5.0.2 (first) and suddenly the phone number is off and there does nothing but nothing I could do to get the full brick ??

kayserxx said:
My moto x will not start, does not fall even in fastboot mode. my computer not recognize it. I was in kitkat 4.4.4 and was installed by the ota fastboot 5.0.2 (first) and suddenly the phone number is off and there does nothing but nothing I could do to get the full brick ??
Click to expand...
Click to collapse
Could you be more specific? what did you do? you were on stock 4.4.4? then what did you do? you flashed the 5.0.2 from fastboot by your self? or it was an OTA notification for the upgrade? did you root your phone before? did you make any changes to the stock firmware? Is your Moto X's bootloader is unlocked? Remember always be specific when posting about your problem mate it would be helpful for others to solve your problem quickly.

Yep, you need to be a bit more specific of what exactly happened.
Does a qualcomm device appear in your device manager under windows?

dagoban said:
Yep, you need to be a bit more specific of what exactly happened.
Does a qualcomm device appear in your device manager under windows?
Click to expand...
Click to collapse
had the soak test 5.0.2 v38, turned to kitkat 4.4.4 to do a clean install, but does not grab me the ota 5.0.2 from kitkat, it occurs to me flash the gpt of the soak test and nothing, turned to download first soak test and grab the ota, when they were installing the phone was in black, pin attempt, enter fastboot mode but does nothing that is black screen. on the pc (I have windows xp no qualcomm device in device manager)

kayserxx said:
had the soak test 5.0.2 v38, turned to kitkat 4.4.4 to do a clean install, but does not grab me the ota 5.0.2 from kitkat, it occurs to me flash the gpt of the soak test and nothing, turned to download first soak test and grab the ota, when they were installing the phone was in black, pin attempt, enter fastboot mode but does nothing that is black screen. on the pc (I have windows xp no qualcomm device in device manager)
Click to expand...
Click to collapse
So you tried to downgrade the BL and GPT file?
Have you installed all drivers? Also try this: Press Vol down and Power button for at least 120 seconds! It must be at least 120

kayserxx said:
had the soak test 5.0.2 v38, turned to kitkat 4.4.4 to do a clean install, but does not grab me the ota 5.0.2 from kitkat, it occurs to me flash the gpt of the soak test and nothing, turned to download first soak test and grab the ota, when they were installing the phone was in black, pin attempt, enter fastboot mode but does nothing that is black screen. on the pc (I have windows xp no qualcomm device in device manager)
Click to expand...
Click to collapse
Its already been posted everywhere in the Moto X development never ever downgrade your BL. and you are not mentioning the proper information.. Please elaborate properly. And yes download the Motorola drivers... Install them restart your pc and then connect your phone with pc and see if something happens also follow what @dagoban said...
Sent from my XT1058 using Tapatalk

@kayserxx any news on your side?

dagoban said:
@kayserxx any news on your side?
Click to expand...
Click to collapse
not the truth, bring it to a technical service and they said they do not recognize the pc, just turn on a green light
my pc does not recognize, have all installed driver not I manage to get lucky to revive
is that many are in the same plan in which I walk, so if you help me to solve this, could help more people

kayserxx said:
not the truth, bring it to a technical service and they said they do not recognize the pc, just turn on a green light
my pc does not recognize, have all installed driver not I manage to get lucky to revive
is that many are in the same plan in which I walk, so if you help me to solve this, could help more people
Click to expand...
Click to collapse
Sorry, I'm having some problems understanding your English. Do you mean you already brought your phone to an authorized Motorola Service Station and they couldn't help you? If you can't get the phone displayed in the device manager as qualcomm device then there is nothing you can do. Make sure you really have all the drivers correctly installed, try another PC etc.

kayserxx said:
had the soak test 5.0.2 v38, turned to kitkat 4.4.4 to do a clean install, but does not grab me the ota 5.0.2 from kitkat, it occurs to me flash the gpt of the soak test and nothing, turned to download first soak test and grab the ota, when they were installing the phone was in black, pin attempt, enter fastboot mode but does nothing that is black screen. on the pc (I have windows xp no qualcomm device in device manager)
Click to expand...
Click to collapse
So you have installed 5.02, then tried to downgrade to 4.4.4, and now your phone has a black screen, and device manager on your PC does not list/see the phone?

KidJoe said:
So you have installed 5.02, then tried to downgrade to 4.4.4, and now your phone has a black screen, and device manager on your PC does not list/see the phone?
Click to expand...
Click to collapse
exact, not take, does not enter fastboot mode, my pc does not recognize it, tried it on windows xp and windows 7, windows are both 32bit and nothing

kayserxx said:
exact, not take, does not enter fastboot mode, my pc does not recognize it, tried it on windows xp and windows 7, windows are both 32bit and nothing
Click to expand...
Click to collapse
Plug it into an AC adapter. Leave it connected (and hopefully charging) over night.
Press/hold the power button until the phone vibrates. Then try connecting it to the PC.

Related

[Q] Fastboot mode problem - Xperia SP

Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. I downloaded the Android SDK latest and replaced the USB driver INF file with the one sony give you but it didn't work so reversed back to the other driver the SDK manager installs and that didn't work either.
I've been through the tutorials and even tried to update the driver in device manager in the few seconds it stays there but that didn't work either! USB debugging is enabled too!
Please help, I'm not a noob and have done fastboot booting before and yes for those who may ask have already checked to make sure the bootloader can be unlocked and yes it can also the phone is NOT branded and is unlocked to all networks.
Any help will be appreciated, thanks!
Dave.
Are you on Windows 8? Using USB 3.0?
"As your flesh bears the sigil....your name is that....of a recusant."
First be sure you're using a 2.0 usb port, if this is ok maybe it's a windows 8 driver problem, so you should try this http://forum.xda-developers.com/showthread.php?t=2170114. It works for me
For also fastboot and flashmode come for 5 Sec. So Make sure you prepare the file and attach the device to fastboot or flashmode when it is asked.
Still problems
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
darkdemon32 said:
I'm still working on a 2012 laptop with Windows 7 Premium installed. It's fully up to date and all the drivers are installed properly I just don't get it, I've tried everything and it's still making the noise as if it won't connect. I don't know what to do to be honest. Also yes it is USB 2.0.
Click to expand...
Click to collapse
Hmm...how many USB ports are being used when you're flashing the phone?
"你看到了没? 爱让我流胆怯的泪..."
"Have you seen it? Love has made me cry cowardly tears..."
Fastboot with Xperia XP
I have the same problem, can't get it to fastboot mode.
Tried the Windows 8 zith USB 2, and also on XP machine where I was succesfully used it for a Xperia U.
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
sarkar1990 said:
Dump Windows..
Opensource rules!!! I switch on a VM with Windows only when I need Photohshop. Otw, Ubuntu and openSUSE FTW!!
Click to expand...
Click to collapse
Opensource forever)))
Sent from my ME371MG using xda app-developers app
same problem...
m having same kind of problem i was trying to flash boot img from cm 11 but fast boot isnt recognizing my device any more.my sp is rooted bootloader unlocked.fast boot was recognizing it yesterday.please tell me what to do
What I did was use a Windows XP machine.
Couldn't get it to work on my Windows 7/8, because of the restrictions in driver signatures.
Sent from my C5303 using Tapatalk
fastboot
darkdemon32 said:
Hi guys, got a slight problem with entering fastboot mode. I hold the volume-up key and connect me USB cable but rather than getting the noise verifying it's been connected ok, I get that dull sound it makes when it hasn't worked. It won't even let me install the drivers and in device manager it comes up as "S1boot Fastboot" for a few seconds before then going into battery charging mode. .
Click to expand...
Click to collapse
I have a similar problem. the power light lights up blue then passes into the phone starts loading mode
Sorry for bad English
The updated version (09.14) don't work properly. It doesn't enable me to go to Flashmode. Uninstalled and used the previous version and it worked as it should, no issues entering Flashmode.
i might have actually found the solution. im on the 4.3fw build version 12.1.a.1.201... in my case, my pc will automatically install the drivers for mass storage giving me no chance to update the driver to the one from sony.
you need to do step 9. and 10. if you havent done so from http://unlockbootloader.sonymobile.com/instructions
what i did was allow developer settings and allow debugging via usb.
plug in and attempt to go in to fastboot and obviously it'll fail.
go to device manager. (control panel->hardware and sound->device manager) quickly scroll down go to other devices. you will see s1fastboot (or something like that) if you're quick enough, if not, in my case, the phone will go in to charging mode.
what i did was to disable xperia sp mass storage from disk drives category too.
right click on it and select update driver software and you will select the file you've unzipped (following step 9 and 10 sony's instructions).
after it has finished updating, unplug your usb and attempt to enter fastboot, it should work.
PS: im no expert, this solution might be out there somewhere already or it could just be a great coincidence. some of these steps might not be useful even.
Had this problem and found a funny solution: I switched my cable and the port I was using. Both Ubuntu and Windoze 7 failed on both fastboot and flash mode, even though in both the phone would charge. I grabbed a spare micro USB cable and plugged it into the front of the PC; voila. Now the phone is rooted and running the latest CM.
Need a final solution for this problem
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
TheTras said:
I don't know what to do!!! The problem is this, very similar to the others mentioned above,: When i conect my xperia sp to fastboot mode, pressing volume up while plugging in usb cable, the phone led turns to blue for few seconds and than it just turns to red showing on the screen the battery image( normal charging mode)...... I' m using windows xp and a rooted xperia sp whit cm11 (for locked bootloader obviously). Just two last things:
the phone can be unlocked( I checked it) and fastboot worked the same as now with stock xperia sp firmware.
Please i need a final and a certain solution for this problem!!!
i'll be very thankful to anyone who give me a hand!!!!
Click to expand...
Click to collapse
Are you trying to unlock your phone?
Have you installed device specific/fastboot/flashmode drivers via FlashTool? If you are on Windows 8/8.1, you need to disable driver verification to get it done.
Alternatively if you just wanna unlock your bootloader, you can use the BLU option in FlashTool. Again all drivers will need to be properly installed for your phone to be detected correctly.
You say you had the same problem with stock firmware which means you probably haven't setup adb/fastboot properly on your PC. Does your phone get detected correctly in Device Manager? Have you tried installing drivers via Device Manager?
....
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
TheTras said:
So the solution is installing flashtool and installato drivers via Emma?? Thanks forma the attention!!
Click to expand...
Click to collapse
I meant install drivers via FlashTool. Go to C:\Flashtool\drivers or wherever you have installed Flashtool and run the Flashtool-drivers.exe.
Select flashmode drivers, fastboot drivers and common drivers viskan board (SP drivers) and install them. Like I said if you are on Win 8/8.1, you will have to disable driver signature enforcement. Just look it up in YouTube and follow a tutorial.

[Q] Motorola logo freeze

Hi Guys!
I was just regular using my phone for the last few months and then suddenly yesterday it decided to get crazy. First the green light was blinking and I couldn't acess my cellphone, so I rebooted and then it all started.
It stops at the Motorola logo.
I can acess the fastboo flash mode, tried to factory reset or either recovery, but once again stops at the same motorola screen
If I turn if off, I can see the charging status of the phone.
I know nothing about flashing, I've looked around and my XT890 it's a retail version, but I don't know what to download and such. And the worst case is that I'm traveling around US and I'll be here for anothers 12 days and I really need my cellphone back.
kursku said:
Hi Guys!
I was just regular using my phone for the last few months and then suddenly yesterday it decided to get crazy. First the green light was blinking and I couldn't acess my cellphone, so I rebooted and then it all started.
It stops at the Motorola logo.
I can acess the fastboo flash mode, tried to factory reset or either recovery, but once again stops at the same motorola screen
If I turn if off, I can see the charging status of the phone.
I know nothing about flashing, I've looked around and my XT890 it's a retail version, but I don't know what to download and such. And the worst case is that I'm traveling around US and I'll be here for anothers 12 days and I really need my cellphone back.
Click to expand...
Click to collapse
You can restore it easily with RSD Lite.
Just download it here: http://www.4shared.com/rar/vYYHCwBj/RSDLite57.html
And then download a factory image from here: http://forum.xda-developers.com/showthread.php?t=2239706
(Select the one you find appropiate)
Make sure you have the Moto drivers installed, your bootloader is unlocked and then install RSD Lite and extract the image somewhere.
Connect your phone in fastboot, open RSD Lite, and in filename browse to the folder whre you extracted the image and select the .xml file in it.
Then press start and wait.
tatazeuz said:
You can restore it easily with RSD Lite.
Just download it here: http://www.4shared.com/rar/vYYHCwBj/RSDLite57.html
And then download a factory image from here: http://forum.xda-developers.com/showthread.php?t=2239706
(Select the one you find appropiate)
Make sure you have the Moto drivers installed, your bootloader is unlocked and then install RSD Lite and extract the image somewhere.
Connect your phone in fastboot, open RSD Lite, and in filename browse to the folder whre you extracted the image and select the .xml file in it.
Then press start and wait.
Click to expand...
Click to collapse
And it's the fastest and best way for doing it, and void the warranty, right?
Still I can't connect withing the RSD. My cellphone is connected, I can see it in the fastload screen
"USB connected", but can't get it to be shown in the "Show device" in RSD. What can I do now?
kursku said:
Still I can't connect withing the RSD. My cellphone is connected, I can see it in the fastload screen
"USB connected", but can't get it to be shown in the "Show device" in RSD. What can I do now?
Click to expand...
Click to collapse
Make sure you have this installed
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
tatazeuz said:
Make sure you have this installed
Click to expand...
Click to collapse
I intalled and uninstalled to see if changed anything. It seems that it doesn't work.
I'm using a Windows 8 64x version, does it has anything to do with it?
kursku said:
I intalled and uninstalled to see if changed anything. It seems that it doesn't work.
I'm using a Windows 8 64x version, does it has anything to do with it?
Click to expand...
Click to collapse
I don't think so. My Windows 8.1 x64 works fine.
Have you tried different usb ports? That made a difference for me once.
tatazeuz said:
I don't think so. My Windows 8.1 x64 works fine.
Have you tried different usb ports? That made a difference for me once.
Click to expand...
Click to collapse
Yes I did, when It's charging and not in Fastboot, it shows up in the computer connected to de USB. When I change to the fastboot it doesn't show as connected. Even though I can use the cmd to work things out, but can't use it to flash it.
So, it works in a weird way all of them.
Those are the pictures of the connected cellphone, when it's in fastboot it shows as fastboot. When it's charging shows as XT890.
kursku said:
So, it works in a weird way all of them.
Those are the pictures of the connected cellphone, when it's in fastboot it shows as fastboot. When it's charging shows as XT890.
Click to expand...
Click to collapse
Start the phone i nfastboot then try the command "fastboot devices"
Send me a screen. Your PC doesnt seem to recognize the device very well.
I'll try to get a different computer tro try it, but so far no success
Try to put your ADB and Ri files to C:\"your foldername". It could be that there are problems when the files are in your user-accounts folders.
Did you already tried to connect with USB on the backside of your PC? Frontside are mostly hubs which could cause trouble.
via Razr I & Tapatalk 4
ICuaI said:
Try to put your ADB and Ri files to C:\"your foldername". It could be that there are problems when the files are in your user-accounts folders.
Did you already tried to connect with USB on the backside of your PC? Frontside are mostly hubs which could cause trouble.
via Razr I & Tapatalk 4
Click to expand...
Click to collapse
Can I do it with the CMD without the RSI?
What does RSI mean?
via Xoom 2 & Tapatalk 4

[Q] Moto X bricked?

So I was going through the rooting process for the second time on my ATT Moto X and while in bootloader flashing 4.2.2 something went wrong and it wasn't fully flashed. There was no error, it just said "Done" on bootloader. So I restarted the phone and ever since then the phone has had a black screen, although when I plug it into my computer it recognizes it. With that said, I've tried to use RSD Lite but it just fails to put it into fastboot mode, and it does not come up under either fastboot devices or adb devices.
Not sure what else I could do from here. Holding the power button and volume down button to get into bootloader doesn't work either. Does anyone here have any ideas?
TsterT said:
So I was going through the rooting process for the second time on my ATT Moto X and while in bootloader flashing 4.2.2 something went wrong and it wasn't fully flashed. There was no error, it just said "Done" on bootloader. So I restarted the phone and ever since then the phone has had a black screen, although when I plug it into my computer it recognizes it. With that said, I've tried to use RSD Lite but it just fails to put it into fastboot mode, and it does not come up under either fastboot devices or adb devices.
Not sure what else I could do from here. Holding the power button and volume down button to get into bootloader doesn't work either. Does anyone here have any ideas?
Click to expand...
Click to collapse
Can you clarify a few things?
First, have you been on 4.2.2 this entire time, or were you attempting to 'downgrade'?
Next, when you "turn on" the device, you say it has a black screen...does it light up at all, or vibrate?
And third, when you say the device is 'recognized' by the PC, how is it recognized? When you go to Device Manager, do you see a listing for "qhsusb_bulk"? If not, what is the device listed as?
Sorry I didn't specify those things in the original post, but I appreciate you taking the time to respond.
I was originally on 4.4 and was in the process of downgrading to 4.2.2 post-camera.
The phone does not light up or vibrate or anything, but I can hear it connect on my computer. Not that this is the computer making the sound, not the phone.
And third, my phone comes up as a listing on RSD Lite v6.5.1. It does not provide any information, it just says it is connected. My device is listed as "Qualcomm HS-USB QDLoader 9008 (COM4)"
TsterT said:
Sorry I didn't specify those things in the original post, but I appreciate you taking the time to respond.
I was originally on 4.4 and was in the process of downgrading to 4.2.2 post-camera.
The phone does not light up or vibrate or anything, but I can hear it connect on my computer. Not that this is the computer making the sound, not the phone.
And third, my phone comes up as a listing on RSD Lite v6.5.1. It does not provide any information, it just says it is connected. My device is listed as "Qualcomm HS-USB QDLoader 9008 (COM4)"
Click to expand...
Click to collapse
OK, I understand. There may be hope for you but it will require patience and exacting precision. Don't get your hopes up TOO much, but I will attempt to help you.
Normally, it is NOT possible to downgrade, but (thankfully) 4.4 > 4.2.2 Post-Camera is the one exception.
First, I realize that RSD Lite shows "Qualcomm HS-USB QDLoader 9008 (COM4)", but I need you to open Device Manager and tell me what it says in there. If you aren't familiar with how to get there, simply press the start button, and type 'device manager' (without quotes, of course). It should show up under "Control Panel", assuming you are on Windows 7.
Also, tell me for sure which version of Windows your PC is running.
Then we can proceed further.
"Qualcomm HS-USB QDLoader 9008 (COM4)" is from Device Manager. RSDLite simply lists the model as "QHSUB_DLOAD"
I am running Windows 8.1 64bit
TsterT said:
"Qualcomm HS-USB QDLoader 9008 (COM4)" is from Device Manager. RSDLite simply lists the model as "QHSUB_DLOAD"
I am running Windows 8.1 64bit
Click to expand...
Click to collapse
Ah, OK. This is good news.... "QHUSB_DLOAD"
Basically, you have somehow corrupted your bootloader.
Please reference this thread: http://forum.xda-developers.com/showpost.php?p=49876179&postcount=1
If you follow the instructions exactly, we should be able to force your phone into fastboot mode. From there, we can manually flash back to 4.4
Remember, there are no guarantees with this, and I don't even know if it has been attempted or is possible in Windows 8. So if you aren't successful, get your hands on a Windows 7 PC, and try again.
If you get stuck, post back here and I will attempt to help.
Sweet man, I really appreciate your help. I'll try all of that and report back here when done. Thank you again.
TsterT said:
Sweet man, I really appreciate your help. I'll try all of that and report back here when done. Thank you again.
Click to expand...
Click to collapse
One last comment: Do NOT use a USB 3.0 port for this. Only use a USB 2.0 port. Good Luck, and let us know how it works out....
Hell ya, it worked like a charm. Back into bootloader. Thank you again for helping me so quickly. You're awesome.
TsterT said:
Hell ya, it worked like a charm. Back into bootloader. Thank you again for helping me so quickly. You're awesome.
Click to expand...
Click to collapse
Welcome!!! Glad it went so smoothly for you. Remember to give 'thanks' to the OP of the De-Bricking thread I linked you to.
:good:
Help please
Help please
hi Bro
I followed ur step bcz my phone got stuck on the 4th step
http://forum.xda-developers.com/moto...t1060-t3118342
when i did the 4th step it got lack for around 30 min and nothing happens i quit the application and the phone is still in black screen
i have attached images with error what i get
i have moto xt1060

Serious problem.Phone not booting!

My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!
Maybe died flash boot
Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?
Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so
Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you
hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.
Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.
Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it
Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.
same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.

moto x hard brick

i was on lineage os, but after that i flash stock firmware 5.1 thrgh command prompt. all done well and device booted after that i got security patch upadate 2016. while installing that update in recovey mode my phone goes off. after that i cant boot mobile i think its hard brick. i am unable to open bootloader too. tried all key combination but nothing happn when i connect phone to pc no devices detected but somtimes green light blink. on phone. i have installed all driver i.e adb and motorola and qualcomn one. but unable to detect device on pc . anyone know solution plz hlp meee. my devices is xt1052 retail asia
manoj3101 said:
i was on lineage os, but after that i flash stock firmware 5.1 thrgh command prompt. all done well and device booted after that i got security patch upadate 2016. while installing that update in recovey mode my phone goes off. after that i cant boot mobile i think its hard brick. i am unable to open bootloader too. tried all key combination but nothing happn when i connect phone to pc no devices detected but somtimes green light blink. on phone. i have installed all driver i.e adb and motorola and qualcomn one. but unable to detect device on pc . anyone know solution plz hlp meee. my devices is xt1052 retail asia
Click to expand...
Click to collapse
You cant install that update while you were using roms, check videos about to revive the moto x from hard brick
YedanyXD said:
You cant install that update while you were using roms, check videos about to revive the moto x from hard brick
Click to expand...
Click to collapse
found one video but when he connect device somthing like hqsusb appers. but in my case nothing happn when i cnnt device to pc. if u find any hlpful video plz provide me link

Categories

Resources