Database Develop

Gear VR Manager APK (for Canadians!)

just got my gear vr that i ordered from the states but can not get it setup, i assume i need the gear vr manager apk. when i put my phone in it says on the display to take the phone out and install the software and it does but then says I need to update my phone could someone post the apk and I will see what happens thanks.

erik10002 said:
just got my gear vr that i ordered from the states but can not get it setup, i assume i need the gear vr manager apk. when i put my phone in it says on the display to take the phone out and install the software and it does but then says I need to update my phone could someone post the apk and I will see what happens thanks.
Click to expand...
Click to collapse
its not an apk, i tried the apk still didnt work you need the newer firmware, im with telus. obviously will need root to do this.
Downlaod apk should work. https://www.dropbox.com/s/2cmbkeyamj...dStub.apk?dl=0
install ael kernel v5, clear cache dalvik, reboot
download apk from above link
After downloading apk you wont see that app, I used Nova, created a shortcut, chose activities, then vrsetupwizardstub, then samsung gear vr, then hit the created shortcut and done. or you can download quick short cut maker from the play store
then when you install phone into gear vr the first time everything should be golden!

Was going to try and avoid having to root but I don't have much patience to wait for lollipop and don't want $200 collecting dust so I will try this. Thanks
*you link is not working though*
Can you also link me to the thread for that kernel thanks

Alight let's try again.
Kernel http://forum.xda-developers.com/not...pment/30-november-2014-n4-ael-kernel-t2961240
Vr setup apk https://mega.co.nz/#!7xd2xDob!uqqCiYYpTaDIoenAK4H-cBTineKRG4xiTp-ZlVb6P98
Dk 3.0 rom in t-mobile android dev forum
1. Flash rom first
2. Flash kernel right after do not boot after flashing the rom! or it will bootloop. If you do then boot into recovery and flash kernel
3. After downloading apk you wont see tha app, I used Nova, created a shortcut, chose activities, then vrsetupwizardstub, then samsung gear vr, then hit the created shortcut and done. or you can download quick short cut maker from the play store
then when you install phone into gear vr the first time everything should be golden!

Cant I use the kernel with just the stock bell mobility rom one rooted?

Mine wouldn't boot with the stock Telus kernel. Plus ael is really nice. Try it if works great if not flash ael.

Flashed all on top of my bell stock rom and it worked, ran the vr setup and still didn't work then realized that it is most likely the phone software/build that needs to be a newer version. Just Flashed dk 3 with ael kernel and will try setup and report back.

I have cm12 on my note the unofficial version is there anything I can do to make the setup.work on this rom

i flashed firekat with the ael kernel and when i start up the vrsetup wizard it still tells me my phone needs to be upgraded, what am i doing wrong?
edit: figured it out, if you are installing firekat you have to install the version 7 regular version not the canadian one, then flash AEL on top and it works.
still wondering if its possible though to get this going on AOSP.

VR app with Google Cardboard
Hi friends! One question... is posible to launch VR app without Samsung Gear VR? For example to use Google Cardboard with my Note 4? haha

jdnichollsc said:
Hi friends! One question... is posible to launch VR app without Samsung Gear VR? For example to use Google Cardboard with my Note 4? haha
Click to expand...
Click to collapse
I would like to know this.I am trying to do this,but i didn t find way anywhere

Anyone? I'm trying to do the same thing. Didn't know that it's an exclusive app that is only enabled with the Gear VR.

ThaiM said:
Anyone? I'm trying to do the same thing. Didn't know that it's an exclusive app that is only enabled with the Gear VR.
Click to expand...
Click to collapse
I've tried this several times to see if i can get Oculus Home to run properly with a Google Cardboard. Furthest I can tell you I got was loading up developer mode in Gear VR service to run downloaded apps from the Oculus store. Depending on what kernel and version of lollipop you're running you may run into some odd screen errors. However, low persistence mode should change your screen display to a bright flickering when developer mode is enabled. After loading up a downloaded app/game from oculus within Gear VR service you won't be able to look around because the tracking data is specific to enhancements made by the Gear VR HMD.
Long story short, you could theoretically play bluetooth controller enabled games. You wouldn't have any headtracking

zenoknite said:
I've tried this several times to see if i can get Oculus Home to run properly with a Google Cardboard. Furthest I can tell you I got was loading up developer mode in Gear VR service to run downloaded apps from the Oculus store. Depending on what kernel and version of lollipop you're running you may run into some odd screen errors. However, low persistence mode should change your screen display to a bright flickering when developer mode is enabled. After loading up a downloaded app/game from oculus within Gear VR service you won't be able to look around because the tracking data is specific to enhancements made by the Gear VR HMD.
Long story short, you could theoretically play bluetooth controller enabled games. You wouldn't have any headtracking
Click to expand...
Click to collapse
Yep. I recently figured that out. It uses the headtracking in the Gear VR headset. I originally thought it was just a fancy shell. Apparently now. I wish there was a mod to be able to use the Note 4's gyros. But there are mods out there where people are creating headtracking circuit boards. But that seems out of my league.

ThaiM said:
Yep. I recently figured that out. It uses the headtracking in the Gear VR headset. I originally thought it was just a fancy shell. Apparently now. I wish there was a mod to be able to use the Note 4's gyros. But there are mods out there where people are creating headtracking circuit boards. But that seems out of my league.
Click to expand...
Click to collapse
Yea... I'd say wait for Rift CV1 if you got a good computer. Gear VR is just a novelty piece tbh. You can only use it in short bursts of time until it overheats. I'd say an hour at max without a fan blowing into your face. Don't get me wrong though, it's worth the $99USD price tag to experience and share with family and friends.

marxim4 said:
I would like to know this.I am trying to do this,but i didn t find way anywhere
Click to expand...
Click to collapse
will never work. Not fully. Its optimzed for the Gear VR headset depending on the display size as well.

not sure anybody still cares but i went to a friends house in VT a few weeks back, got a Gear VR delivered to his place by amazon.com, brought it back home (canada) and I have an american VPN and had no issues at all to set it up, I have access to any and all US only content such as MilkVR. It seems, unlike the playstore, the content is geo-restricted and doesnt take into account the billing info on your samsung account. If anybody has issues, try a free VPN, or rent one for a month.

Is anyone still looking/having issues with the Gear VR on Note 4 in canada using the Arcadia lollipop 5.1.1 Rom by Emporia.
My headset worked, asked me (in a vr environment) to remove the headset and install the necessary apps. once complete, it had me re-insert my phone into the headset, only to display a single image of the welcome screen and then hang on the health and safety warning, (that was also in 2d and only viewable in its entirety without the headset on.
if I remove the phone, within a brief second it shows "calibrating" before it realizes it has been disconnected. and the oculus software shuts down.
I appreciate any help anyone could provide, I too hate the idea of the money having been wasted on something that no longer works at all.

gear manager and samsung custom ROMS don't play nice together

I have been trying all the advice I can find for two weeks. It's an obsession now, it's not healthy. Any help would be life changing. I have a lot of experience flashing roms and tinkering, I've been doing this for several years... like since CM7 with multiple phones. usually I can follow some instructions and make things work but this has been an epic fail.
I have a galaxy s3 and an s4 I've tried gear manager on both.... connects fine with a touchwiz ROM on the phone(s)., but I despise touchwiz and I'd rather get rid of the watch if I have to. I almost always use AOSP roms... currently CM13. gear will not work. I've tried editing build.prop changing samsung to htc. I've downloaded .apk's for gear plugin and samsung accessory service and install before and after gear manager. I've tried multiple older versions.
the latest stumbling block is an error message that says, "check if your phone is compatible and if the samsung gear app needs to be updated"
has anyone seen this message, I can't find any similar problems on this site or anywhere else?
am I missing something. did they update the gear app and now previous solutions are not working?
Thanks for your help. XDA usually saves me! I have never had to ask for help before.

I had the same issue with my Galaxy s5 kltedv with AICP Nougat custom rom. I got the Gear S3 and downloaded the gear manager app but it wouldn't open due to it "detecting and unauthorised OS." In the meantime I've had to return to the stock touchwiz (MM) rom to get it to work. Seems ridiculous that the app won't open with a custom rom yet it can be used on non Samsung phones. I'm still hunting around for an answer/solution so can't help you out just yet.
Found a work around answer for you at https://forum.xda-developers.com/gear-s2/help/samsung-devices-running-cm13-12-1-pair-t3290076

2Mecky: Try editing your build.prop and replace your make with "google" or "htc". I've been able to get as far as getting the manager to open on my S5, but I can't get it to detect my Gear 2. I just got the watch today, though so I haven't had a lot of time to mess around. I am kind of surprised that I was able to get this far, though.

S6 Active with gearVR/gearVR apps?

I am trying to get my S6 Active to work with the gearVR, and I am struggling with the process. Users here: https://forums.oculus.com/community/discussion/comment/322781/#Comment_322781 have been messing around with the USB connector to get the active to fit. The next problem is software.
Back in 5.0.2, the S6 active had the software for gearVR. I remember it having 4 gearVR apks listed under system software. The software was then gone in updates 5.1.1 and 6.0.1, of course.
I reinstalled Gear VR SetupWizard, Gear VR Service, Gear VR Shell, and Gear VR System from aptoide. I believe these are the four apks that are found in S6s and S7s. The problem now is that whenever I activate gear VR SetupWizard, I click download and it gives me "An unexpected error has occurred, please try later". I tried WIFI and over the network. My next plan would be to mess with the build.prop file to spoof another device. However, S6 Active's bootloaders are locked and unrootable at the moment with 5.1.1 and above. I would just be satisfied at this point with just the Oculus store working without the actual gearVR headset, and have the oculus apps run with cardboard headsets.
Any idea what to do at this point? Do I even have the right 4 apks installed?

hi i try to root s6active 5.0.2 to do the same can you send me link to do ??
Plese give me link to root S6 active 5.0.2 i try to do the same and i have a vertion of Vr good apk

SmartThings cannot read data

Hi all, I have my Watch 3 the very first day. Do you use SmartThings application? It does not work on my device (it did on my previous Gear S3 Classic). It claims it cannot read data. Does anyone use this app? Or is there any better remote TV application? Can't find any at Galaxy Store.
Thanks,
Lubos

Every time I try to use smartthings it tells me that I need to log into smartthings with Bixby. When I go on my phone it pulls up the Bixby modules and when I tap on smartthings it tells me all the wonderful things I can do but none of those things work with no where to sign in. On Samsung's website it says that if you are using the Samsung account (aka have migrated from the smartthings account) then it should automatically work, but it doesnt. Seems like a bug to me but it doesn't make sense as it seems like all the hooks are there for it to work.

Have to wait.
If someone did not know, the appropriate version of the application has not yet been prepared for Tizen 5.

After updating to version 1.5.18, the Smartthings application works fine.

Need help cracking Samsung VR app

As some of you know, Samsung not only stopped supporting Samsung VR, they actually sabotaged the app totally by not allowing new installs to open.
Essentially there is a user agreement that you have to agree to but it requires an “internet connection” to accept but this is the part which was sabotaged.
I believe that Samsung took the verification server offline so the app always thinks you are not connected.
I need someone to look into how that verification happens and how it can be circumvented.
As a backup, if anyone knows a SPECIFIC version of Samsung VR app which does not have this verification process (sideloaded) please post the version.

UP i need too please somebody help

anyone who has a samsung vr app backup via titanium backup please share

Only the old ones work without Internet connection. The last working one is Samsung VR 1.59.4.
Check here: android-apk.org/com.samsung.vrvideo/
It also works with the Oculus Go.
Can anyone test this with an Oculus Quest 2 ?

this is backup from titaniumbackup
this is backup from titaniumbackup drive.google.com/file/d/1beqb6fVw2D5xN384wgaUZjIrqr0hPtil/view?usp=sharing

Made a little progress....
I was playing around trying to get Gear VR to work on my new Galaxy S20 plus, I tried installing Occulus from the app store but when I plugged the phone into the GearVR nothing would happen, so I Extracted all the Occulus and GearVR apps from my old S9 into APK's and then sideloaded them onto my S20, and now when I plug it in, it tries to load the setup program but it comes up with an error saying I have no network connection.... is there any way around this?

hi,
i found workaround
1. uninstall Gear VR SetupWizard ( 3.2.03.9 )
2. install version ( 3.0.21 ) from aptoide : https://gear-vr-setupwizard.pl.aptoide.com/app
3. run setup, configure, upgrade to newest version
and it works

handsolo said:
hi,
i found workaround
1. uninstall Gear VR SetupWizard ( 3.2.03.9 )
2. install version ( 3.0.21 ) from aptoide : https://gear-vr-setupwizard.pl.aptoide.com/app
3. run setup, configure, upgrade to newest version
and it works
Click to expand...
Click to collapse
Hi. We have tried to put the 3.0.21 version on and it has installed on phone but don't know how to get it to link with the Gear VR (SMR325) . Anyone with suggestions?

Hi guys, does any one have the full package of apps - I also got a S20 and wanted to try with my old Gear VR R325 headset - it works finr with my Galaxy Note 9 but is not rooted so cant extract the APK's.

geared2003 said:
Can anyone test this with an Oculus Quest 2 ?
Click to expand...
Click to collapse
Just tried. It doesn't work. It installs fine, opens fine (no messages), shows that gridded floor pattern (of very old versions of Samsung VR) but nothing else happens (no buttons to click on, no nothing. Just void.
Did you find a way to make Samsung VR to work on Quest 2 ?

oplix said:
I believe that Samsung took the verification server offline so the app always thinks you are not connected.
Click to expand...
Click to collapse
I have the APK for version 2.12.7 and it works fine in my Gear VR with Samsung Galaxy S7 (yes, the phone still works too).
I'm not sure exactly what you're trying to do, but it's not only the verification server they shut down. The whole online video server was shut down. So, I do see a "No internet connection" message, but I'm still able to click the other buttons and explore my local media folders using this app, which is exactly what I want to do.
However I was not able to port this version (or any other APK I found) to my Quest 2. The closest I got was to install an Oculus Go APK on the Quest 2, but when I open the app and the "No internet connection" message appears, my Quest 2 controllers are not recognized, so I can't click anywhere to browse my folders. Is that your issue too?
Anyways, I'm in desperate need of a Samsung VR APK that works with Quest/Quest 2. Please let me know if you come across this APK.

I have the same problem with my new Galaxy S10+ now. I cannot accept the terms and conditions in Samsung VR because it says "no internet connection". I tried with SIM and wireless also, but no luck.
I have a Galaxy S9+ too, there i accepted Samsung VR terms and conditions long before Samsung switched off the verification server. So on the S9+ i can still use Samsung VR.
Even tho I noticed in the recent months that on the S9+ it also says "no internet connection", but probably in the appdata folder is a flag or file which they check if you accepted their ToS. If thats not there you cannot go forward to the main menu of Samsung VR.
So I see only one way and this would be you need a Titanium Backup from the Samsung VR app where the ToS are already accepted. Then you also would need to root the new phone that you can install Samsung VR with app data right?
Or is there any way to inject appdata of Samsung VR to your new phone without having root access?
Someone tried that if that even works?

Nytro87 said:
I have the same problem with my new Galaxy S10+ now. I cannot accept the terms and conditions in Samsung VR because it says "no internet connection". I tried with SIM and wireless also, but no luck.
I have a Galaxy S9+ too, there i accepted Samsung VR terms and conditions long before Samsung switched off the verification server. So on the S9+ i can still use Samsung VR.
Even tho I noticed in the recent months that on the S9+ it also says "no internet connection", but probably in the appdata folder is a flag or file which they check if you accepted their ToS. If thats not there you cannot go forward to the main menu of Samsung VR.
So I see only one way and this would be you need a Titanium Backup from the Samsung VR app where the ToS are already accepted. Then you also would need to root the new phone that you can install Samsung VR with app data right?
Or is there any way to inject appdata of Samsung VR to your new phone without having root access?
Someone tried that if that even works?
Click to expand...
Click to collapse
Can confirm that restoring app+data won't work.... at least the backup I found in this thread not.
Restored app+data in Titanium backup and still asks to accept terms with no internet connection..
Best regards,
Niels

I just fixed it, the app checks a txt file in the root Android\data\com.samsung.vrvideo folder. I made a zip file of that folder from my Galaxy S9+, it works at the S10+ too. Just copy that folder with the subfolders and the file inside to "Android\data\"
This folder is avaiable even without root. Even tho I dont see any content in that folder with the normal file manager on the phone, but once you plug your Galaxy to a regular PC you can access that Android/data folder.
So when you unzip it, the path to the file should look like this:
Android\data\com.samsung.vrvideo\files inside that folder 2 files: "VR360Video_3_00_0_EULA_agreed.txt" and "MVRI.txt"
My Samsung VR App now opens without that EULA message and works in offline mode.
Let me know if its working!

Nytro87 said:
I just fixed it, the app checks a txt file in the root Android\data\com.samsung.vrvideo folder. I made a zip file of that folder from my Galaxy S9+, it works at the S10+ too. Just copy that folder with the subfolders and the file inside to "Android\data\"
This folder is avaiable even without root. Even tho I dont see any content in that folder with the normal file manager on the phone, but once you plug your Galaxy to a regular PC you can access that Android/data folder.
So when you unzip it, the path to the file should look like this:
Android\data\com.samsung.vrvideo\files inside that folder 2 files: "VR360Video_3_00_0_EULA_agreed.txt" and "MVRI.txt"
My Samsung VR App now opens without that EULA message and works in offline mode.
Let me know if its working!
Click to expand...
Click to collapse
This is working!!
Thanks a lot, never thought this would be this simple!!
Best regards,
Niels

Great! Yeah I was surprised too, that no one else found it out before. I almost deleted it while resetting my S9+ but then I checked that Android/data folder lol...

I must be missing something here. Aside from the Android\data\com.samsung.vrvideo\files directory and associated files, what other apk's should be installed? I've installed the oculus app from the Play store and it still does not launch when I place my S21 into the Gear VR headset.

The play store oculus app does not work with gearvr. It has to be installed by the gearvr setup app.

can someone explain/walk me through the process like i'm 5. Just pulled out my gear vr for the first time in a year and am trying to get it to work with my old s9+ that had to be factory reset.

jetxten said:
can someone explain/walk me through the process like i'm 5. Just pulled out my gear vr for the first time in a year and am trying to get it to work with my old s9+ that had to be factory reset.
Click to expand...
Click to collapse
put the fone into gear vr and it tells u to install gear vr components take the fone out and confirm- it should start auto install all files u need ...