Related
Hello!
I have opened my BA case, cause the down button on the front panel stopt working as it should (I had to press it REALLY hard to make it work). The rubber part was a bit used.
After reassembling the unit, the screen is dead - it remains black (backlight is on, touchscreen works, but the image is black). What could go wrong?:/
did u figure it out??
check that nothing is torn or broken, espcially those thin soft connectors...
Yep, its functional again. Simply the maiunboard connector did get 'used off' - had to correct the pins (just... move them a little) with a thin needle
_TB_TB_ said:
Hello!
I have opened my BA case, cause the down button on the front panel stopt working as it should (I had to press it REALLY hard to make it work).
Click to expand...
Click to collapse
I've had that twice now, fortunately Orange Care brought me a new one today.
[Update]
Okay, this is bizarre, but I think I have solved the volume key problem. First, I discovered that the volume key problem was oddly related to the USB port. When I put pressure on that port, the volume key would start working again. But I explored further, and it's actually very slight *downward* pressure on the USB port that solves the problem.
So I then just wedged a piece of thin somewhat hard plastic (sliver from a plastic folder) along the top ridge of the USB port, and the volume key now works perfectly.
I think this might also be related to keyboard problems (keys not responsive), because now my keyboard also works perfectly. Can people please test (downward pressure on USB port) and report back?
[Original post]
Hi all - I need help and would appreciate some advice:
My volume key is starting to become unresponsive. At first I thought it was a ROM problem, but it continues with several different ROMs. And if I press the buttons VERY hard, they work.
I presume this is the same basic issue that occurs with the keyboard, but I have it in the volume key.
I am off the warranty. Anyone have ideas/ tricks for how to fix this? I might try a bit of WD-40 for the hell of it.
I have already mapped other keys to control the volume, but I still can't zoom with the camera.
Thanks for any advice.
i too am experiencing the same problem, however i found a solution, pressure on the battery solved this for me....
what i did was put layers of tape on the battery and under the cover...
i guess the hardware becomes worn out after a while, and i dont mean the housing, because i have a brand new housing, i think it lies on the motherboard or the keypad board
this also solves the keyboard letters that never worked too like
m, i and t
HOLY COW, you are right! How did you ever figure that out???!!! So bizarre!
I pressed on the battery and it started working again. Still somewhat unresponsive but definitely better. I'll try your tape trick now.
Spike, a 1000 thank yous! I can't believe there is a fairly simple fix.
lol i figured that out when certain keys on the keyboard wont work, out of anger i tried to put pressure on the bottom slide by squeezing it with a little more pressure on the top and bottom, then the keys worked, weird huh??
anyway, the volume key happened to give trouble too and the pressure fixed it... so, i have some tape on my battery until i can get some spongy sticky tape to replace it
glad it worked for you
Yeah, I had noticed some odd things like when I applied pressure laterally across the top, then pressed the volume key, it would be more responsive.
Unfortunately putting pressure on the battery only worked temporarily, and the tape trick did not work. Perhaps my problem is farther along. But I really appreciate the hint. I'll keep messing with it (till I break it )
For what it's worth:
I can solve this problem by putting the charger into the mini-USB and pushing it in hard while having my finger on the other side just below the volume button. After this the volume button works normally for a while. That's the only consistent fix so far.
So, one thing I can conclude is that it's not the volume button itself, but some connection inside???
I've had my Xperia for a year and 4 months. I'm surprised others aren't reporting this. Anyone else with volume button problems?
I too have this problem, but must be a software problem for me. When I press the volume down button and power on at the same time while the phone is off I do get in the red/blue/green screen.
I have send my phone for repair for two times now because of this problem. When I get it back, the volume buttons are working for two days.
I also have problems with the the following keys: Sym, au, shift, @, Z, X and the blue button. But when I press time for like a 100 times they start working again... grazy
Celio1987 said:
I too have this problem, but must be a software problem for me. When I press the volume down button and power on at the same time while the phone is off I do get in the red/blue/green screen.
I have send my phone for repair for two times now because of this problem. When I get it back, the volume buttons are working for two days.
I also have problems with the the following keys: Sym, au, shift, @, Z, X and the blue button. But when I press time for like a 100 times they start working again... grazy
Click to expand...
Click to collapse
It's tricky sorting out whether it's a hardware or software issue, because it comes and goes. But I am convinced that mine is a hardware issue.
Try the trick I mentioned above. I also just pressed down on the whole keyboard hard in different places. It's been working for 6 hours straight!
[I also wonder if the SE repair people cause the volume button issue. I send mine in for repair 2 or 3 times, including for the same keyboard problem you mention]
See the first post for what I think is the solution to this problem
doesnt work for me... what does is the pressure on the main board
i too have the same issue. pushing down on the usb port seemed to have fixed my volume keys better than adding tape under the battery cover.
sigh.. i don't know how much longer this device is gonna last me..
You need to massage your XPERIA every now and then to smoothen the electricty flow throughout the circuit board. Think of it as a human, hmm... just kidding lol
I've had the same issue and I would like to thank all of you for your valuable inputs.
Alright, fellas, here is what it is. Having the USB port on the opposite side of the keys, means slight pressure nudges the board towards the silicone membrane that is on the inside of the hardened metallized shell that forms the volume key itself. The way it is folded inside means that over time it will mould itself to the housing, hence partial usability problem.
A word of warning: nudging the USB port will dislodge the port itself off the main PCB and then you will have a much bigger problem than partially working volume key.
Tape under the battery cover is a gimmick.
enigma1nz said:
Alright, fellas, here is what it is. Having the USB port on the opposite side of the keys, means slight pressure nudges the board towards the silicone membrane that is on the inside of the hardened metallized shell that forms the volume key itself. The way it is folded inside means that over time it will mould itself to the housing, hence partial usability problem.
A word of warning: nudging the USB port will dislodge the port itself off the main PCB and then you will have a much bigger problem than partially working volume key.
Tape under the battery cover is a gimmick.
Click to expand...
Click to collapse
Thanks for the explanation! Although without a diagram it's a bit hard for me to follow. What's the basic problem? The connection to the volume key gets dislodged?
When I nudge the USB port downwards, it's literally about half a millimeter, so it's hard for me to imagine that that could brick the USB port; then again, I know nothing about the internals.
I've had the "permanent nudge" going for a couple months without problems, but I will report back if something worsens.
the presssure trick really worked for the keyboard and volume
i have the same problem guys nd didnt resolve by the methods u told ... plz help me for this
i have the same problem, y buy a new case housing but the problem of the volume key isnt solved changing the housing...i will try some things in the next days..
Another problem that i have is that my usb port doesnt recognize when its plugging in the computer,so i dont have active sync or mass storage,only usb charging...any ideas??thanks in advance!
Hello everybody!
To make a long story even longer I just got LCD replaced on my Acer Liquid E by a technician and the cable that makes touch keys on the bottom responsive (4 of them - Home, Search, Go Back, Menu) got damaged and now they don't work at all. All other functions are OK including camera button and + and - volume. Is there any way to reassign "camera" or "volume" button to be used as "home" or "go back" button ? Or is there an app that would allow you to get by without using those touch keys below the screen? If there is something that can be done would you please explain in great details cause I'm so damn it's scary.
Thanks a lot guys!
Not much help or advise from anybody to this point. But that is quite OK cause I happen to do some digging around and found solutions to my problems.One app is called Button Savior (Root). That's what the author says in the software description:
"Requires root
Requires USB Debugging enabled
If you are afraid of breaking your hardware keys or you have broken keys or you simply just don't have any key on your device, get Button Savior to make your life easier.
This app will display a floating software key panel which can be summoned everywhere anytime.
[Features]
(1) Simulates 'Home' 'Back' 'Search' 'Back' 'Recent Task' 'Screen Off'
(2) Can set to always open or auto hide based on user
customizable timer
(3) Two types of trigger action to choose from
(4) Added Camera key and Call key simulation
(5) Customizable trigger position"
Another one is called Soft Home for BarTender. And there are many more options available for similar problems.
Hi, I had your same exact problem! I replaced the screen by myself, and soft buttons stopped working. Since i didn't damage the cable, I'm 97% sure that the problem is the adhesive used to replace the old one. You need a special adhesive that "conducts" capacity (see h t t p : // focus.ti.com/lit/an/slaa379/slaa379.pdf at page 16).
When i tried to open the device again to replace the adhesive, I ruined a flat cable so now I have damaged the upper part of the touchscreen too, so I'm actually hoping to get it repaired under warranty without saying a word about what happened.
Fingers crossed!
I hope it worked for you my friend. Those Acers are nice phones till something goes wrong and you need to fix it. And Fido does not give a flying rat's ass if your phone is not on warranty. Their customer service just vanished over night the moment rogers took over. Very sad, it used to be awesome company to deal with. I got myself Galaxy S Captivate from AT&T, rooted and unlocked it and now using it on Fido.
Trying to replace the Display I didn't even noticed how I brake the flat cable of the AB88_A1__V1.1_Keypad_A_FPC. I have just received the Keypad Cable 50.H480W.005 from mk-electronic.de
Wish me luck putting my A1 device together.
Hello everybody!
I just bought a broken Acer S100, it had broken touchscreen (also the flat was broken) and there was no keypad. I mean, dismounting the phone, there was nothing related to the 4 buttons under the screen.
I just received the new new touchscreen, but still I don't have the keyboard. I read that dicer13 has bought the replacement flat, what I wanted to know is if the keypad is made only of 1 piece or if there are several pieces that are connected by the flat cable he bought.
IN few word, if I order the "50.H480W.005 Keypad cable" will I have everything to fix this phone or that's only a connecting flat between the mainboard and an other piece that goes just under the screen, which is missing?
On the other hand, will you suggest me to stop thinking about the phisical keypad and use, instead, the Buttun Saviour app? It is possible to use every normal function or the phone would be quite "limitated" and unconfortable to use?
Thank you very, very much for your answer!
nowhere is there an exact answer is whether or not it
dicer13 said:
Trying to replace the Display I didn't even noticed how I brake the flat cable of the AB88_A1__V1.1_Keypad_A_FPC. I have just received the Keypad Cable 50.H480W.005 from mk-electronic.de
Wish me luck putting my A1 device together.
Click to expand...
Click to collapse
Keypad Cable 50.H480W.005 does this piece? it is compatible with the model Acer s100? no photo as it looks..
So i just got my HD7 yesterday, and the first time i try to turn it on i found out that the power button is extremely hard to press, and the position of it is horrible for a right-handed person, should've been on the left top corner instead.
Problem is the power button is too flat that i have to press few times in order to wake the device up, this is really annoying.
My idea is, is it possible to wake the device up by pressing the middle home capacitive button? So it's like the "Activator" on a jailbroken iPhone to change keys around to fit your needs. It really will help us to save the power button from being jammed. (well at least it looks like its going to get jammed if you keep pressing it)
No.
But you can always take your phone back to the store for a refund.
Most HD7's, if not all, have the power button almost flush. You'll find it doesn't take a hard press at all to turn it on. It's almost as if it's a capacitive button itself.
As for the positioning, most right handed people hold the phone in their left hand, and the power button is perfect for the left index finger.
With the power button i find that although the button you push is very wide, the actual button component underneath is very small and situated to the far side of the button area. (see Attached).
If you press it right there, you'll probably notice hardly any force is needed at all
with some time now with the hd7 Im glad the button is flushed as it is or else it would be going ON while in your pocket all the time.
The old HD7 i got the button was hard to press, and same for the camera button. the new one i have is good though. and that attatchment helped! haha, ive been pressing on the middle, when you press on the left its much easier.
I bought a case from T-Mobile (not sure which brand, but has transparent back side) and it came with it's own little button the interacts with the one on the phone, making it MUCH easier to press. It seems all these phones are plagued by the same problem. You'd think a $500 dollar phone would be put together a little better, eh?
Yes they are and its due to capitalism that we see all these flaws. They cannot wait to pump out a new model to justify the 499 price tag. Anyhow I have the same issue as the OP fortunately I have a case that makes it easier to press.
sometimes it feels like I'm gonna break it trying turn it on but the case I bought from SEIDIO helps guide my finger to the button
HD7 unlocked
Have the same problem here. My buttons all work, but they are pretty squishy. I generally use my fingernail on the power button when it isn't in a case. Otherwise, it's not a huge problem.
HTC actually fixed my camera button (they even honored the warranty, which was nice considering I'm not the original owner). If it's really driving you nuts, you might send it in. Not sure if the power button issue will be solved though...sounds like that's more of a design flaw.
More on topic, I really wish it had the one physical button (Windows button). The Samsung Omnia 7 has this and looks amazing. Would really make it much easier to wake the phone.
Yep, had the same problem with the first two HD7's I had. The first time it was the camera button and software problem. Replacement they sent me then had the flush power button. Took me 3 times sometimes to get the phone on. Cases I own make it much better, but I don't always have or want my case on my phone. Needless to say, the last one they sent me is perfect and you notice a different kind of "clicky" feel when you get one that's made the way it should be. Send it back, get one that works.
Hi all,
My partner was handing over my S1 when she lost grip of the device and dropped it in a cup of tea. The bottom part of the device submerged and it was taken out immediately!
I dried out the device and put it back together, everything still works fine however the capacitive buttons and the physical home key don't respond anymore.
Does anybody know if this can be fixed? Could the device be opened and cleaned with contact cleaner or some other solution?
this may help:
http://forum.xda-developers.com/showthread.php?t=1601003
also:
http://www.alibaba.com/showroom/for-galaxy-s-i9000-home-button.html