Someone help me! Please!
Why I can't flash anything with dload method? I have tried lots of things: stock recovery, twrp, erecovery, proxy. But nothing. I tried to use firmware finder too for download an update fullota (of course, all the 3 ZIP package) and tried to put in dload the zips, the update.apps, but won't work. For dload I mean the three buttons method. It gives me always failed, at 5%, with the error "Software Install Failed". Please help me! I tried to toggle signature too to the firmware with huawei firmware extractor but not working. How I can flash firmware (especially firmware founded with firmware finder) using dload method? Please help me and my friends! Thank you to everyone!
These beta build found by firmware Finder might be not enable to be installed on your device. Use the latest check with EMEI to know if it fits.
Gazatus said:
These beta build found by firmware Finder might be not enable to be installed on your device. Use the latest check with EMEI to know if it fits.
Click to expand...
Click to collapse
I'm sorry didn't get the last part. Can you clarify it please ?
I'm on the same boat as the op. With the firmware finder I can only find PRA-LX1C33B130 but like op said, it stops at 5%. The firmware for my phone is PRA-LX1C33B120, but I can't find it anywhere. Right now my phone is bricked because I really can't find any version to install it.
Update firmware Finder, select the update you want and hit "check......" then it will now ask you for IMEI compatibility check
For me, Ive found more than 10 firmwares, I'm on B110 and there is up to b125... Nevertheless I can't install the proxy add-on, I can't use their "register with dns" feature, and I can't past the 5% threshold on dload flash. It seems to be not working at all for pra-lx1. I'm on stock B110 update (phone came with b100 and the B110 update was a legal ota without any mods).
Did you try to send a mail to huawei support team? Explain that you are a dev and you need to stock rom. They may send you a link share it please!
Gazatus said:
Update firmware Finder, select the update you want and hit "check......" then it will now ask you for IMEI compatibility check
For me, Ive found more than 10 firmwares, I'm on B110 and there is up to b125... Nevertheless I can't install the proxy add-on, I can't use their "register with dns" feature, and I can't past the 5% threshold on dload flash. It seems to be not working at all for pra-lx1. I'm on stock B110 update (phone came with b100 and the B110 update was a legal ota without any mods).
Did you try to send a mail to huawei support team? Explain that you are a dev and you need to stock rom. They may send you a link share it please!
Click to expand...
Click to collapse
That option is on android right ? I can't use it, so I was trying with the windows version but it doesn't have any option for checking the firmware (or at least i'm not finding it). ~
Well after you said that there is a option to check the firmware the only one that I found (PRA-LX1C33B130) when I checked the firmware it said that It was not approved to install. I guess that is why it stops at 5% ? maybe ? hopefully the firmware status goes to approved somewhere in the neaaarr future.
squallx85 said:
That option is on android right ? I can't use it, so I was trying with the windows version but it doesn't have any option for checking the firmware (or at least i'm not finding it). ~
Well after you said that there is a option to check the firmware the only one that I found (PRA-LX1C33B130) when I checked the firmware it said that It was not approved to install. I guess that is why it stops at 5% ? maybe ? hopefully the firmware status goes to approved somewhere in the neaaarr future.
Click to expand...
Click to collapse
I get software Install Failed at 5% using dload ALWAYS! Even with authorized/allowed firmware. I'm thinking that dload on Huawei p8 lite 2017 is not working at all.
Related
Hello.
I have a P9 Plus with the firmware VIE-L29C636B130. I tried to upgrade using Firmware Finder and Proxy to VIE-L29C636B202. After updating, the phone restarted and installed the update.
But, my firmware changed to VIE-L29C900B202. I can no longer see any further updates from firmware finder.
How do I upgrade to Nougat?
Any help is appreciated. :crying:
akiko_sakai said:
Hello.
I have a P9 Plus with the firmware VIE-L29C636B130. I tried to upgrade using Firmware Finder and Proxy to VIE-L29C636B202. After updating, the phone restarted and installed the update.
But, my firmware changed to VIE-L29C900B202. I can no longer see any further updates from firmware finder.
How do I upgrade to Nougat?
Any help is appreciated. :crying:
Click to expand...
Click to collapse
It shows you mistakenly flash a firmware from another region (cross flashing).
Just dload from you SD card, version C636B103, then you can dload either C636B180 or C636B202 later.
From C636B202, you can move to Nougat C636B362
B103 seem scarce, take it from here; https://mega.nz/#!W88SmSSa!Atlsa9G6aWcUK37KKqkLB-gz7VllP5IpyXT75k-4e5Q
soft-touch said:
It shows you mistakenly flash a firmware from another region (cross flashing).
Just dload from you SD card, version C636B103, then you can dload either C636B180 or C636B202 later.
From C636B202, you can move to Nougat C636B362
B103 seem scarce, take it from here; https://mega.nz/#!W88SmSSa!Atlsa9G6aWcUK37KKqkLB-gz7VllP5IpyXT75k-4e5Q
Click to expand...
Click to collapse
Hi
Can you help to mirror the mega file? I can't download it because mega have limited quota to download for free user.
lockmunk said:
Hi
Can you help to mirror the mega file? I can't download it because mega have limited quota to download for free user.
Click to expand...
Click to collapse
Just create a free Mega account and add it to your Mega cloud. Then, download to your PC from your own account
Sent from my MHA-L29 using XDA Labs
akiko_sakai said:
Hello.
I have a P9 Plus with the firmware VIE-L29C636B130. I tried to upgrade using Firmware Finder and Proxy to VIE-L29C636B202. After updating, the phone restarted and installed the update.
But, my firmware changed to VIE-L29C900B202. I can no longer see any further updates from firmware finder.
How do I upgrade to Nougat?
Any help is appreciated. :crying:
Click to expand...
Click to collapse
I also faced same problem as you and finally the problem solved by force update to VIE-L29C636B180 and after that i got notification to update to B362 Nougat and then can OTA to latest B384.
I have the same problem just in another region.
How can I upgrade to nougat from VIE-L09C900B181?
I have the same problem just in another region.
My phone's build-number is VIE-L09C900B181.
Can sy help me?
Thanks in advance.
Did this work? I also have the same problem as the thread starter says.. I have a l29c636b103 before and its been almost a yr since nougat released. But I still dont get ota updates so I decidedto manually update via dload, I ddownloaded c636b202 but after install it has c900b202 on my phone. I want to get back to c636 and recieve ota.. but I read some that I need to debrand my unit to be able to recieve ota? I have vendor smart country ph
Hi... I cant find a way to upgrade sucessfully from MM to N in my device. ..
I tried both Mostar method (via Huawei Updater and via Firmware Finder) which are shown here: https://forum.xda-developers.com/p9-plus/how-to/easy-guide-to-upgrade-vie-l29c636-to-t3538540 :
When I try the H.U. method, it seems that the ROM URL provided is not valid, so in the Hisuite app I get "internet conection problem" message.
When I try the F.F. method, it seems that the app has changed a little bit, so I dont find the functions explained by Mostar.
I tried another method with F.F. too, by using proxy option and vpn option. In order to follow Mostar instructions I have searched the C636B320 version in F.F., but i got an error message cause apparenly that the version were deleted on the servers.
So I tried with others, (like B391, and all versions of B362 and B370, always "fullOTA-MF") but always I had issues. In some cases the new version has downloaded but at install, I got an error and nothing happens. In another cases when downloads the upgrade it stops at 70% and closes the system upgrade app.
I just search and read all in this forum, and honestly I dont understand enough to apply C432 or C20 methods to my phone version. So I ask you for help, please.
I'm stuck with a modern model phone that apparently will have an Android "O" upgrade in the world soon, but I still in MM...
Thanks in advance!
try a FullOTA-MF-PV version (VIE-L29C636B362 or VIE-L29C636B370) from Firmware Finder and proxy methode
xzanium said:
try a FullOTA-MF-PV version (VIE-L29C636B362 or VIE-L29C636B370) from Firmware Finder and proxy methode
Click to expand...
Click to collapse
Ok I'll try with this. What's the meaning of that acronym?
OMG after a thousand of attemps, it worked!!! I used PV version with proxy method. Thankyou very much!!
Why only PV version
mati9054 said:
OMG after a thousand of attemps, it worked!!! I used PV version with proxy method. Thankyou very much!!
Click to expand...
Click to collapse
I managed a couple of months ago to flash B362 to get EMU 5.0 via FF and worked fine.
Since then I've tried every method (except TWRP) to get to B390 non PV version.
Always get download failed...
So tried Auto DNS, Manual DNS, Proxy and downloaded files into Dload folder ... Phone updater found relevant firmware but either download failed or package mismatch or something.
B390 latest valid firmware for L29C636 so can someone tell me how to get to this version and what is the difference between the FullOTA MF version and the PV one...I think a few members would like to understand that.
you must update to other version first
try update to B370 then B380 then B390
Ok thanks to Mostar088 thread on updating from MM to N...he says
"You have to use Proxy method and the firmware must be approved. If u click Check Firmware Access. When u go to Nougat from MM u must use FullOTA-MF-PV. 2.220gb
Use B362 to install.
If u use Proxy method, in Settings enable Use Proxy for install , when it finds the update in Settings - Updater do NOT click on Update but click back one step and then click on Menu, in there choose Download Latest Full Packege.
Then click update but when it starts click Paus and remove proxy settings, then click Resume Update."
As I was on Nougat B362 and thought I was correctly using all the FF methods I noticed Mostar in his quote above mentioned a couple of steps not covered anywhere else. I followed it to the absolute letter and was finally able to update to B390 EMU 5.0.1...
Many thanks to Mostar088 as I had been pulling my hair out.
I have been using firmware finder to update my PRA-LX1. Now as I can see I don't receive any official updares. I'm stuck at security patch June. Even though July update is available when I check for updates in System Update it sais 'No updates'.
Any solutions?
FullOfMysteries said:
I have been using firmware finder to update my PRA-LX1. Now as I can see I don't receive any official updares. I'm stuck at security patch June. Even though July update is available when I check for updates in System Update it sais 'No updates'.
Any solutions?
Click to expand...
Click to collapse
I guess you are on Oreo.
Go to the firmware finder and find the list of firmwares and which correspond to the July security update,and check if it is approved for installation,if it is then go ahead and press update through VPN and follow the instructions.
Choose OTA not FullOTA if you are on Oreo,since it also took me a while to get the update.
dinoderda said:
I guess you are on Oreo.
Go to the firmware finder and find the list of firmwares and which correspond to the July security update,and check if it is approved for installation,if it is then go ahead and press update through VPN and follow the instructions.
Choose OTA not FullOTA if you are on Oreo,since it also took me a while to get the update.
Click to expand...
Click to collapse
so you're saying that firmware finder works on oreo if I choose the OTA firmware?
the problem is that firmware finder doent seem to work on oreo. Even though the update is approved, with vpn started the System Update app says 'No updates'.
FullOfMysteries said:
so you're saying that firmware finder works on oreo if I choose the OTA firmware?
the problem is that firmware finder doent seem to work on oreo. Even though the update is approved, with vpn started the System Update app says 'No updates'.
Click to expand...
Click to collapse
Oh really? I haven't really tried it on Oreo so I don't know,try updating it the manual way through dload,you can find how to do this on the forums.
dinoderda said:
I guess you are on Oreo.
Go to the fi mairmware finder and find the list of firmwares and which correspond to the July security update,and check if it is approved for installation,if it is then go ahead and press update through VPN and follow the instructions.
Choose OTA not FullOTA if you are on Oreo,since it also took me a while to get the update.
Click to expand...
Click to collapse
dinoderda said:
Oh really? I haven't really tried it on Oreo so I don't know,try updating it the manual way through dload,you can find how to do this on the forums.
Click to expand...
Click to collapse
I have tried different types of the Dload method but no one ses to work. I tried something from the WAS-LX1 SD CARD UPDATE GUIDELINE but using an update for this phone. Well, even if that update is available for update, with the dload method it says that 'The update package is not compatible with the current version. Please download the right package and try again." And I have tried that with about 10 other updates witch were available in firmware finder.. but I got the same results.
It seems that no method of updating is working for me right now... Or maybe I am doing the dload method wrongly.
I can't find specific stept for the dload method on the forums. On some of them is even said that dload method doesn't work on this phone all together.
FullOfMysteries said:
I can't find specific stept for the dload method on the forums. On some of them is even said that dload method doesn't work on this phone all together.
Click to expand...
Click to collapse
Hmm,well as a last resort try to use dload with a service firmware.
I am sending you links for PRA-L31,the one I have,and you can check if you have that one by going into the engineering menu,and you do that by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info.
http://androidhost.ru/6uc - this is for the July security patch firmware (aka the newest one),but it will take 8 hours to download,at least it took that time for me
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is for the firmware you are probably running right now
All of these links are from 4PDA forums.
https://4pda.ru/forum/index.php?showtopic=809771&view=findpost&p=65929494 - here you can find instructions on how to do it,if you don't understand them basically you need to firstly apply the UPDATE.APP from the first update_sd.zip you find in the dload folder,and then do the vendor UPDATE.APP which you can find in the PRA-L31 folder.
I am sorry if you cannot completely understand what am I saying,I am typing this in a bit of a rush so...
dinoderda said:
Hmm,well as a last resort try to use dload with a service firmware.
I am sending you links for PRA-L31,the one I have,and you can check if you have that one by going into the engineering menu,and you do that by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info.
http://androidhost.ru/6uc - this is for the July security patch firmware (aka the newest one),but it will take 8 hours to download,at least it took that time for me
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is for the firmware you are probably running right now
All of these links are from 4PDA forums.
https://4pda.ru/forum/index.php?showtopic=809771&view=findpost&p=65929494 - here you can find instructions on how to do it,if you don't understand them basically you need to firstly apply the UPDATE.APP from the first update_sd.zip you find in the dload folder,and then do the vendor UPDATE.APP which you can find in the PRA-L31 folder.
I am sorry if you cannot completely understand what am I saying,I am typing this in a bit of a rush so...
Click to expand...
Click to collapse
THANK YOU SO MUCH! This actually helped me restore my phone to normal. I installed the B363 version from the MEGA link ( I had B360 installed. my mistake was that I initially installed the wrong version with firmware finder, B360 instead of B363). But once I installed the B360 I got a notification to update to B369.
Thank you for your help!
dinoderda said:
Hmm,well as a last resort try to use dload with a service firmware.
I am sending you links for PRA-L31,the one I have,and you can check if you have that one by going into the engineering menu,and you do that by going into the dialer and typing this: *#*#2846579#*#*,and then going to Veneer Informations and Version Info.
http://androidhost.ru/6uc - this is for the July security patch firmware (aka the newest one),but it will take 8 hours to download,at least it took that time for me
https://mega.nz/#F!nwhAWDjC!cNovAN6dKLlO_YZ9fjMbzQ - this is for the firmware you are probably running right now
All of these links are from 4PDA forums.
https://4pda.ru/forum/index.php?showtopic=809771&view=findpost&p=65929494 - here you can find instructions on how to do it,if you don't understand them basically you need to firstly apply the UPDATE.APP from the first update_sd.zip you find in the dload folder,and then do the vendor UPDATE.APP which you can find in the PRA-L31 folder.
I am sorry if you cannot completely understand what am I saying,I am typing this in a bit of a rush so...
Click to expand...
Click to collapse
Thank you for this simple and useful guide. :good:
I was able to successfully update back to stock using Normal upgrade *#*#2846579#*#* dload method (not force with 3 buttons) and service firmware 8.0.0.363(C432). After that, got OTA for 8.0.0.369.. Everything went fine, except device name changed automatically to P9 lite 2017
Is this okay?? The same happens with service firmware you mentioned 8.0.0.369(C432)...
Beside that, Power+Vol+ gives me no more eRecovery, just EMUI with options to wipe data or reboot..
My device: P8 lite 2017 PRA-LX1 (PRA-L31)
Almironi said:
Thank you for this simple and useful guide. :good:
I was able to successfully update back to stock using Normal upgrade *#*#2846579#*#* dload method (not force with 3 buttons) and service firmware 8.0.0.363(C432). After that, got OTA for 8.0.0.369.. Everything went fine, except device name changed automatically to P9 lite 2017
Is this okay?? The same happens with service firmware you mentioned 8.0.0.369(C432)...
Beside that, Power+Vol+ gives me no more eRecovery, just EMUI with options to wipe data or reboot..
My device: P8 lite 2017 PRA-LX1 (PRA-L31)
Click to expand...
Click to collapse
Yeah that is good,since this is a firmware which was released around Croatia,Albania,Czech Republic and etc,but there it is called P9 Lite 2017 instead of P8 Lite 2017 so it is no problem.
And I believe you enter eRecovery by holding Volume Up while plugging in your phone to a charger or USB port on a computer,at least that is how I did it before on Nougat,haven't touched any recoveries I fixed my phone with DC Phoenix.
hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone
Blackko said:
hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone
Click to expand...
Click to collapse
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder
zgfg said:
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder
Click to expand...
Click to collapse
the phone doesn't show any update to nougat, im stock at C605B135, but i do remember that it showed an update a while ago, but not now, weird thing.
well, if i try to install with the dload method the phone says "Incompatibility with current version. Please download the correct update package"
I tried the B380 and 397, i will try the 394 that you suggest.
thanks for the help buddy, i will update the post later with the results
PD: can i download this rom from another site or this is the only one? it always fails at 60-70% and it is really slow, 3mb download, i have 30mb
zgfg said:
You mean eva-l19C6005B135 (c605), not eva-l19C6005B135 (c6005)?
Anyway, this is old Android 6 / EMUI 4, why don't you upgrade to Android 7?
If you have valid SIM card and WiFi, no OTA for update coming?
Check under Settings / System Updates.
You can also check from HiSuite if it offers you a newer version to install
Also, switch off, connect to charger, press and keep Vol+, switch on by Pow, and check from eRecovery: Download and install latest firmware and recovery, what it offers to install
You can also try to install by DLOAD, L19 c605 eg b394 - for DLOAD it must be FullOTA, MF-PV (must be PV), package number #109400, as on screenshot from Firmware Finder
Click to expand...
Click to collapse
the same error... "Incompatibility with current version. Please download the correct update package" with the version that you said, i dont know what to do now
here are the steps that i did:
1-downloaded update.zip (just this file)
1.1 unzip it
2-put it on sd(dload folder)
3-enter download mode and try to install it
do i need to download the other files?
do i need to format my sd again? because it have some other files in it, but with the ota b135 it jus install it fine over and over again
Blackko said:
the same error... "Incompatibility with current version. Please download the correct update package" with the version that you said, i dont know what to do now
Click to expand...
Click to collapse
Sorry, don't know the situation with c605 ROMs.
IMO, you should try to flash FullOTA-MF-PV but the MM buiild, but I cannot find by Firmware Finder any MM PV build for your c605 cust (hence I also don't know how did you flash that D007 at the first place?!)
You could also rebrand to eg c432, there are many more stock firmwares for c432 - but for rebranding you will first need to unlock Bootloader
PS: For DLOAD, you must download and put to the DLOAD folder all update* files you find for the given build, not just the first update.zip file- if you didn't do so, that was maybe the reason for your issues with WiFi
zgfg said:
Sorry, don't know the situation with c605 ROMs.
IMO, you should try to flash FullOTA-MF-PV but the MM buiild, but I cannot find by Firmware Finder any MM PV build for your c605 cust (?!)
You could also rebrand to eg c432, there are many more stock firmwares for c432 - but for rebranding you will first need to unlock Bootloader
PS: For DLOAD, you must download and put to the DLOAD folder all update* files you find for the given build, not just the first update.zip file- if you didn't do so, that was maybe the reason for your issues with WiFi
Click to expand...
Click to collapse
how can i unlock the BL? the only method that i think will work is send an email to huawei as a request for the code :/ or paying 20$ for chimera software and unlock it(i don't know if it will work anyway)
but for now im going to download all the files again for a second try and yes, im sure that's why my wifi if failing, i downloaded a ota (not full ota) with a different D007 (mine is D002) because there is not any MM rom for c605 just that one from firmware finder rewrite (desktop version)
Blackko said:
hey guys i hope you can help me with this lil problem.
I was flashing update with just fail messages so i decide to install the same (eva-l19C6005B135) BUT it was the D007 (my phone has D002) and it was ok, after the update the phone restarts but now the wifi isn't working( it does turn on but doesn't show any wifi available).
btw the phone says D002 is installed (weird) (CUSTC605D002)
everything is just working fine, i restore the net config and restarted the phone but still the same, no wifi
what can i do now ? :/ this isn't my phone
Click to expand...
Click to collapse
Please check older threads under the same P9 Q/A subforum (and/or in the Guides subforum) where you opened your own thread - every week or so somebody asks the same questions about codes for Bootloader (just curious why nobody wants first to invest his own time to search for the answers
Not specific for P9 but same for the other Huawei/Mate models (excluding the newest models released alreadyvwith Pie)
Hint: DC Unlocker or Ministry of solutions, price is not 20 but 4 or 5 Euros
zgfg said:
Please check older threads under the same P9 Q/A subforum where you opened your own thread - every week or so somebody asks the same questions about codes for Bootloader (just curious why nobody wants first to invest some of his own time to search for the answers
And/or in the Guides subforum.
Not only for P9 but same for the other Huawei/Mate models (excluding the newest models eleased alreadyvwith Pie
Hint: DC Unlocker or Ministry of solutions, price is not 20 vut 4 or 5 Euros
Click to expand...
Click to collapse
ok thx budd, where do i have to unzip the other files? like data and public data etc, in the same dload folder?
Blackko said:
ok thx budd, where do i have to unzip the other files? like data and public data etc, in the same dload folder?
Click to expand...
Click to collapse
All three update*.zip files must not be unzipped, just copy them as zip files to DLOAD folder, do not create any subfolders
Do not use L09 file, just update.zip and two others with L19 and public in the name - see screenshot
Dlete DLOAD and create again, to make sure something hidden did not remain
And for Bootloader codes you have:
https://www.dc-unlocker.com/
https://ministryofsolutions.com/paid-services
zgfg said:
All three update*.zip files must not be unzipped, just copy them as zip files to DLOAD folder, do not create any subfolders
Do not use L09 file, just update.zip and two others with L19 and public in the name - see screenshot
Dlete DLOAD and create again, to make sure something hidden did not remain
And for Bootloader codes you have:
https://www.dc-unlocker.com/
https://ministryofsolutions.com/paid-services
Click to expand...
Click to collapse
thx for the help, this is all the info i need, you know alot of this
Blackko said:
thx for the help, this is all the info i need, you know alot of this
Click to expand...
Click to collapse
Were you able to update/DLOAD now?
zgfg said:
Were you able to update/DLOAD now?
Click to expand...
Click to collapse
well, i think i bricked my device :/ i unlocked it via chimera, and installed a rom from another country without rebrand it first, after that it just boot to a recovery screen with the option of factory reset but it trows an error,
y flashed the rom b135 that i flash before and the phone install it and everything was ok but now, it doesn't boot, im stuck at the warning screen "your device has been unlocked and can't be thrusted" and the phone says booting now but nothing happends, i can't even flash the same rom again, im stuck :/
PD:the chimera or hi suit doesn't recognize the phone
Blackko said:
well, i think i bricked my device :/ i unlocked it via chimera, and installed a rom from another country without rebrand it first, after that it just boot to a recovery screen with the option of factory reset but it trows an error,
y flashed the rom b135 that i flash before and the phone install it and everything was ok but now, it doesn't boot, im stuck at the warning screen "your device has been unlocked and can't be thrusted" and the phone says booting now but nothing happends, i can't even flash the same rom again, im stuck :/
PD:the chimera or hi suit doesn't recognize the phone
Click to expand...
Click to collapse
Of course that flashing another cust without rebranding first, bricks the phone.
I just wonder how you know now that, why you didn't take time to read or ask about in advance (and I think, in previous answers I was also writing you about)
Sorry, I'm busy and cannot help you further.
There are guides on XDA, but maybe better pay for DC-Phoenix or Ministry of solutions to unbrick the phone and to install you Nougat like c432 b504
download http://download-c1.huawei.com/downlo...52&siteCode=np
Create a file dload in SD card and move file Update.app in dload .
Use method 3 Buttons To install.
Hi, i've searched so much for but can't find any Firmware for the P40 Pro ELS-NX9. Does anyone know where i can find it ?
The only one i've found is from a russian server and it doesnt work says always wrong device.
ELS-LGRP4-OVS firmwares should work. I flashed ELS-LGRP4-OVS 10.1.0.148 Full OTA from Firmware Finder (Download Link) using Hisuite Proxy and it worked perfectly with my ELS NX9.
Thanks i will try it.
jericho246 said:
ELS-LGRP4-OVS firmwares should work. I flashed ELS-LGRP4-OVS 10.1.0.148 Full OTA from Firmware Finder (Download Link) using Hisuite Proxy and it worked perfectly with my ELS NX9.
Click to expand...
Click to collapse
Hi, thanks for that information. Can you help/direct me to a guide to install firmware for Huawei? I am new to something like that, do I need a NM card to install firmware from that? Kind regards
Tried it, it works, have to write hisuite proxy firmware on youtube und follow the guide videos vom team mt. Dont need a card. Regards
LevsOG said:
Hi, thanks for that information. Can you help/direct me to a guide to install firmware for Huawei? I am new to something like that, do I need a NM card to install firmware from that? Kind regards
Click to expand...
Click to collapse
@kyero985 wrote a guide in another thread, here:
kyero985 said:
Hey everyone,
So after bouncing around the P30P HiSuite proxy method thread and thanks to @jericho246 for his earlier post with the path to the .148 full OTA package, I have successfully flashed .148 from .136 for my EU C432 ELS-NX9 as shown below. It's possible to do the same for C605 and the other regions as well assuming you have the correct, approved firmware too. For those on C432, I feel your pain having to wait so long for a working solution as EU always seem one of the last continents to get the newest updates. So now we can have the June and July Android security patches and hopefully all the camera and other improvements carried over across, including .142. Big thanks to the OP @@SilviuO , @IProfessor and everyone from the original source as well that made this all possible for us P40P users: https://forum.xda-developers.com/hu...de-how-to-flash-approved-fullota-zip-t4112775
This method will also work for those coming from even older versions prior to .136, assuming you use the newest approved firmware for your region and model and that Firmware Finder says it's safe for installation. I wouldn't recommend trying to flash any unapproved versions for your device even if it might look like there's a newer version available on FF as it's probably not for your region yet!
CHECK for your approved OTA Firmware FIRST: Download and install MT Firmware Finder here to check that your firmware is approved and usable for your P40P. DO NOT try to flash firmware that isn't approved and/or isn't designed for your region as this might brick or mess up your device! For example, TN-AN00 is for Chinese region models and not for C432/C636/C605 models. Click for the Google Play Store mirror for those with working GMS
NOTE: I did not need to do full a wipe but backed up via HiSuite anyway just in case. All of my apps and settings remained intact after the update. I don't have GMS so can't confirm if that's still working though.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Download and install the latest Hisuite_10.1.0.550_OVE Desktop Client on to your PC (you DON'T need to locally download the full OTA as HiSuite will do that for you later)
2. Connect your P40P to your computer, making sure ADB USB debugging is enabled under your Android Dev options and agree to install the HiSuite app on your P40P when prompted. Continue with the next steps until the HiSuite desktop client recognizes your device (the app will ask you an authentication code as well if you've not used HiSuite before). Do a local Backup of all your data to your PC just in case while we're here.
3. Close down your HiSuite Desktop client and download and run the HiSuite proxy.exe (unzip all of the files first to anywhere you'd like)
4. Configure your HiSuite proxy for the suitable version and software region of your P40P. Your cust/model is shown next to your firmware build number under Software Update/About Phone.
FIND THE URL TO YOUR UPDATE THROUGH THE WEB-BASED FIRMWARE FINDER PAGE HERE (make sure you check your region and model back on the app to ensure it's definitely approved for your P40P, in my instance for my EU C432 ELS-NX9, the model began with ELS-XXX)
For .1XX -> .148 C432 EU ELS-NXX MODELS ONLY: Paste this URL for .148 in the package path: http://update.dbankcdn.com/TDS/data/files/p3/s15/G5633/g1604/v434397/f1/ , followed by ELS-LGRP4-OVS 10.1.0.148 as the version next to it and tick the 'Point Version' checkbox. After that, click on the Setup button to finish the proxy configuration. From what I understand, .147, .148 & .149 are identical anyway according to the update log so just edit the version number and paste the new package URL for that one instead if you want to flash another build as stated in the online Firmware Finder database above (make sure the path ends in /f1).
Make sure the output log says it's ready for installation before you proceed and don't close it (as shown in the attached picture). If it comes up with any error messages, make sure your antivirus/firewall isn't blocking it.
5. Launch your HiSuite Desktop Client again, connect your P40P and click on the Software Update option after which it will detect .148 or the build you pointed the HiSuite proxy to. Keep your HiSuite proxy app open in the background throughout the update process!
6. That's it, all done! It's worth wiping the cache partition too in Android recovery mode if you'd like as that's what I like to do every time there's a large update.
I hope this helps you all and good luck!!! :good::highfive:
Click to expand...
Click to collapse
One question. I downgraded my firmware to 131 to be able to install the google services. Now regulary update to the recent firmware (automatic updates through phone) doesn´t seem to work. It says 131 is the recent firmware (one my phone). Is this normal or is there a workaround? Thanks for any infos
have a question, mi p40 pro its ELS NX9 but de custom its C10 (C10E7R4P1) can downgrade? and where find the firmware url to use a hisuite proxy.
thanks.
jericho246 said:
@kyero985 wrote a guide in another thread, here:
Click to expand...
Click to collapse
hey!
how can i look for firmware that is for c150? i dont know it. thx