Database Develop

[ADT1] [REF] Google ADT-1 Stock OTA URLs

Introduction:
This is the information thread for all known OTA's for Google ADT-1
There is no dedicated subforum for the ADT-1, and as there are already other ADT-1 threads in this subforum: I figured I would post this here.
Click to expand...
Click to collapse
File List:
Latest:
LPX13D → LRX22G
See Google ADT-1 # Official ROMs - XDA Wiki for a list of files
Click to expand...
Click to collapse
FAQ:
How to find the ota?
If you're rooted, wait for the device to prompt you to update, then check /cache for the file
If you're not rooted, wait until the same time and do an adb logcat and look for a line with .zip in it
Why isn't the latest ota listed?
We can only list what we have, if the ota from Build X to Build Y isn't listed, we dont have the file for it yet.
How do you setup adb/fastboot
Please read the stickies in the general subforum, this is not a formal guide
Do I need to unlock the bootloader to flash the update zip?
No, the ADT-1's bootloader is unlocked by default
Can I flash this if I have a custom rom?
No, you must be on a stock AND unmodified rom
Can I flash this if I'm rooted?
Only if you have not modified any files
Click to expand...
Click to collapse
Credits:
Click to expand...
Click to collapse
Changelog:
Feb 2, 2015: LPX13D → LRX22G
Oct 24, 2014: Initial Page
Click to expand...
Click to collapse
2char

bf4ca4a77f8ad0bf0f02cb8ff162d3d016f15dbb.signed-molly-LRX22G-from-LPX13D.bf4ca4a7.zip
The ota is finally out

@TheManii if wanted update manually, it has to be done through fastboot right?

mkaymuzik said:
@TheManii if wanted update manually, it has to be done through fastboot right?
Click to expand...
Click to collapse
Not with otas, they must be sideloaded in recovery like all standard nexus type updates.
Follow the flash instructions for any generic nexus update, paying in mind the differences in controls. (the button on the rear is the equivilent of the physical buttons on a phone)
If you have a factory image (of which none are publically + officially available) for the adt1, then that would be via fastboot.

If someone unrooted could pull the stock /system/etc/install-recovery.sh file and attach it, that would be awesome.

Chainfire said:
If someone unrooted could pull the stock /system/etc/install-recovery.sh file and attach it, that would be awesome.
Click to expand...
Click to collapse
look like that file dosent excist or its just me. even did a full unroot install everything to stock and and updated to last ota and didn't see the install-recovery.sh

Chainfire said:
If someone unrooted could pull the stock /system/etc/install-recovery.sh file and attach it, that would be awesome.
Click to expand...
Click to collapse
I have a new one I can fire up and pull. Stand by.

So sad that there have been no further updates, no custom ROMs, and no Marshmallow. I mean, I understand why, but...

Archon810 said:
So sad that there have been no further updates, no custom ROMs, and no Marshmallow. I mean, I understand why, but...
Click to expand...
Click to collapse
Correction there is development on this device I gathered a team and we have been working it
We have official TWRP support and we are aiming to get CyanogenMod support soon (once with fix the small bugs remaining)!
PS: Unofficial builds are available + Gapps
our github: https://github.com/adt1-dev
our g+ community: https://plus.google.com/u/0/communities/100381533065874109253
We wont let this device die!!

mknrls said:
Correction there is development on this device I gathered a team and we have been working it
We have official TWRP support and we are aiming to get CyanogenMod support soon (once with fix the small bugs remaining)!
PS: Unofficial builds are available + Gapps
our github: https://github.com/adt1-dev
our g+ community: https://plus.google.com/u/0/communities/100381533065874109253
We wont let this device die!!
Click to expand...
Click to collapse
Nice! If you don't mind, when you have relatively stable builds or even official CM support, ping us at AP, we'd love to do a post.

Archon810 said:
Nice! If you don't mind, when you have relatively stable builds or even official CM support, ping us at AP, we'd love to do a post.
Click to expand...
Click to collapse
For sure

Looks like Pure Nexus is out for ADT-1. It lives!

Archon810 said:
Looks like Pure Nexus is out for ADT-1. It lives!
Click to expand...
Click to collapse
yes forgot to sent you a message lol would you prefer talking on xda or hangouts?

[UNIVERSAL] Goodix Patch for Every N ROM

Hi everyone,
Im presenting to you the universal goodix patch for every android n rom for kate and kenzo . The point of this patch is patching ramdisk for goodix properly and making those changes directly to roms' own boot.img so you dont have to flash any other rom boot.img seperatly and thats why volte will be still there but you still have to flash a custom kernel which support goodix fp. Actually the point is i can give you no bootloop guarantee. By the way im a totally noob so dont give me a hard time
Credits goes to @jhenrique09 and @nicknitewolf
Flashing Instructions:
ROM -> GApps -> Patch -> Kernel which support goodix fp
Goodix Patches:
Goodix_Patch_Citrus
Goodix_Patch_CosmicOS
Goodix_Patch_AOSIP
PS: If you want patch for another rom. Please just simply post the boot.img of the rom which is you are going to flash. I will be adding the others.

scrubjay55 said:
Hi everyone,
Im presenting to you the universal goodix patch for every android n rom for kate and kenzo . The point of this patch is patching ramdisk for goodix properly and making those changes directly to roms' own boot.img so you dont have to flash any other rom boot.img seperatly.
But you still have to flash a custom kernel which support goodix fp. Actually the point is i can give you no bootloop guarantee. By the way im a totally noob so dont give me a hard time
Credits goes to @[email protected]
Flashing Instructions:
ROM -> GApps -> Patch -> Kernel which support goodix fp
Goodix Patches:
Goodix_Patch_Citrus
PS: If you want patch for another rom. Please just simply post the boot.img of the rom which is you are going to flash. I will be trying to add the others.
Click to expand...
Click to collapse
Thank you:good:

Thanks.

why we need 100 variations of one patch? there is universal patch that works on any (or any lineage based) ROM, attached it below. flash this patch, flash custom kernel with Goodix support, that's all.
you wasting your time, tho

thegreatn_ said:
why we need 100 variations of one patch? there is universal patch that works on any (or any lineage based ROM), attached it below. you wasting your time, tho
Click to expand...
Click to collapse
This patch flashes a different rom's boot.img so it may give you bootloop because of ramdisk differences but mine just modify it. Even if it boots, there will be bugs.
I was thinking the same thing and umang96 answered:
Umang96 said:
Every rom has little different ramdisk, if you flash boot.img of one rom on another then most probably you will have bootloop or even if you boot you might face bugs.
Click to expand...
Click to collapse

scrubjay55 said:
This patch flashes a different rom's boot.img so it may give you bootloop because of ramdisk differences but mine jsut modify it.
Click to expand...
Click to collapse
ok, got it, thx

Good work！Thanks！

Pzqqt said:
Good work！Thanks！
Click to expand...
Click to collapse
Glad to hear that

Thanks mate ?

Haven't tried it, but thanks for the effort ill feedback later

@scrubjay55 Can you do LOS please? Here's latest nightly boot.img
https://www.dropbox.com/s/9b8p1fwnyjis0oj/boot.img?dl=0

vkass said:
@scrubjay55 Can you do LOS please? Here's latest nightly boot.img
https://www.dropbox.com/s/9b8p1fwnyjis0oj/boot.img?dl=0
Click to expand...
Click to collapse
It is done and in the op.

This works great. Thanks.

los is lineage os?

ShOgIBaRiBoA said:
los is lineage os?
Click to expand...
Click to collapse
Yes it is.

scrubjay55 said:
Hi everyone,
Im presenting to you the universal goodix patch for every android n rom for kate and kenzo . The point of this patch is patching ramdisk for goodix properly and making those changes directly to roms' own boot.img so you dont have to flash any other rom boot.img seperatly.
But you still have to flash a custom kernel which support goodix fp. Actually the point is i can give you no bootloop guarantee. By the way im a totally noob so dont give me a hard time [emoji14]
Credits goes to @jhenrique09 and @nicknitewolf
Flashing Instructions:
ROM -> GApps -> Patch -> Kernel which support goodix fp
Goodix Patches:
Goodix_Patch_Citrus
Goodix_Patch_CosmicOS
Goodix_Patch_LOS
PS: If you want patch for another rom. Please just simply post the boot.img of the rom which is you are going to flash. I will be adding the others.
Click to expand...
Click to collapse
Please make it RR Nightly goodix too. Thanks for this.
Sent from my Redmi Note 3 using Tapatalk

@scrubjay55
Darekness redefined
Xenon hd
Aosip
Great job ??

Here is boot.img from latest RR nightly
https://drive.google.com/file/d/0B9x7vid3MSMbRGYzTThVVnM5V0k/view?usp=drivesdk

febry_valdy said:
Please make it RR Nightly goodix too. Thanks for this.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Tuxedo_20 said:
Here is boot.img from latest RR nightly
https://drive.google.com/file/d/0B9x7vid3MSMbRGYzTThVVnM5V0k/view?usp=drivesdk
Click to expand...
Click to collapse
Done and in the OP. :fingers-crossed:

najafi.ali.68 said:
@scrubjay55
Darekness redefined
Xenon hd
Aosip
Great job
Click to expand...
Click to collapse
Patch for AOSIP is here :fingers-crossed:

[ROM][AOSP][UNOFFICIAL] ColtOS Enigma 4.6 [ENCHILADA]

Ingredients used:
1. Device tree: https://github.com/AOSiP-Devices/device_oneplus_enchilada
2. sdm845-common: https://github.com/AOSiP-Devices/device_oneplus_sdm845-common
3. kernel: https://github.com/0ctobot/neutrino_kernel_oneplus_sdm845
4. Vendor blobs: https://github.com/AOSiP-Devices/vendor_oneplus_sdm845-common
ROM sources on github: https://github.com/Colt-Enigma
Download here: https://androidfilehost.com/?fid=1899786940962581536
Installation as usual for OP6:
1. Flash ROM zip in TWRP
2. Flash TWRP zip
3. Reboot to recovery
4. Flash opengapps + (optional) Magisk.
5. Reboot to system
Tested on my own decrypted OP6.

Thanks for building this, am currently using it on op5t and it's super fine with great battery life
Let's see how it will perform in our op6

Do you will support your 10 Roms?

Sh0X31 said:
Do you will support for your 10 Roms?
Click to expand...
Click to collapse
Sure, it's not a problem to make a new build occasionally.

quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Really great dev, thanks for your hard work... Because of You, OP6 thread is RICH NOW...

No need to flash the oos zip at the start inorder to boot?

showstopper1 said:
No need to flash the oos zip at the start inorder to boot?
Click to expand...
Click to collapse
You need it for EVERY ROM OUT THERE BRO... flash oos twice... Then flash the rom

quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Dude this rom slays. Running great on fajita. Thanks man.
What the heck makes high brightness mode keep turning back on after I shut it off?

is this rom using may security?

cmart4 said:
is this rom using may security?
Click to expand...
Click to collapse
yup

quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!

sky104hk said:
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
Click to expand...
Click to collapse
It's Kernel Issue as it's already noticed in other rom as well..

..

ColtOS-Enigma 4.1: https://androidfilehost.com/?fid=1395089523397965580
You need to also flash this zip after flashing the rom in order to fix the messed up settings menu: https://androidfilehost.com/?fid=1395089523397965583 (thanks to Rakesh Batra from telegram).

CYB3R0ID694 said:
It's Kernel Issue as it's already noticed in other rom as well..
Click to expand...
Click to collapse
so any other custom kernel can try? pretty love smurf kernel but not quite compatible...

Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?

pmbonea said:
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
Click to expand...
Click to collapse
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.

quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Thanks a lot!:good:

quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Can you also merge the Finger Print patches for us 6T Users?

Mannan Qamar said:
Can you also merge the Finger Print patches for us 6T Users?
Click to expand...
Click to collapse
uh, i wouldnt know how to do that

It's Here ROM is under test (AEX)

Hello mates the ROM is under test it will be available soon as it is free of minor bugs

Credits LOL!!!
Credits :
1. Samar-V, LordUtkarsh, Jarl-Penguin, and Friends (Device tree, Vendor tree, etc.)
2. Galih Gusti Priatna (wulan17 [Builder])
3. ZainArbani & phhusson (RIL-fix)
4. All Redmi 6A | OFFICIAL™ Members

Nevin jesmon said:
Hello mates the ROM is under test it will be available soon as it is free of minor bugs
Click to expand...
Click to collapse
Based on ..?

Ryu--X said:
Based on ..?
Click to expand...
Click to collapse
aosp

Please don't make a post without actual proof of it's existence or download links just to tease people

the version it has almost stable ,it is a gsi 9 AEX . flash boot and vendor of the patch pack "Redmi6A Treble" flash image rom + magisk V17.1 . if problem "phh patch" .

I don't know how to upload rom ?

MrKreb said:
I don't know how to upload rom ?
Click to expand...
Click to collapse
Mega would be great !!

Hi you go to the official website of AospExtended ROM you take the gsi-generic-arm

aar1968 said:
Hi you go to the official website of AospExtended ROM you take the gsi-generic-arm
Click to expand...
Click to collapse
Downloading...
Any bugs ?

You wanna try AEX Rom
This link you can try AEX
www*mediafire*com/file/ch2qcfa45tz4zlb/AospExtended-v5.8-cactus-20190611-1221-UNOFFICIAL-wulan17*zip/file
Change * to (.)

MrKreb said:
This link you can try AEX
www*mediafire*com/file/ch2qcfa45tz4zlb/AospExtended-v5.8-cactus-20190611-1221-UNOFFICIAL-wulan17*zip/file
Change * to (.)
Click to expand...
Click to collapse
Any guide on how to correctly install a custom recovery?, to try this, i already have unlocked the bootloader, but no root.

FreeRealState said:
Any guide on how to correctly install a custom recovery?, to try this, i already have unlocked the bootloader, but no root.
Click to expand...
Click to collapse
Just instal with twrp + instal magisk first before you restart you phone.
Rom in undertest.. This rom have many much bug

new behavior of the unofficial

"Ryu--x" the official version of 05/19 is long to start but works well, the new does not start and the unofficial loss of network or SMS

Still under testing since the 4th of June: Any update please?

wulan17 said:
Credits :
1. Samar-V, LordUtkarsh, Jarl-Penguin, and Friends (Device tree, Vendor tree, etc.)
2. Galih Gusti Priatna (wulan17 [Builder])
3. ZainArbani & phhusson (RIL-fix)
4. All Redmi 6A | OFFICIAL™ Members
Click to expand...
Click to collapse
Not a single update in more than one month: This thread was an April Fool or something?

mrpsanter1968 said:
Not a single update in more than one month: This thread was an April Fool or something?
Click to expand...
Click to collapse
Did you try the last build or the one before ?

Ryu--X said:
Did you try the last build or the one before ?
Click to expand...
Click to collapse
There are no links to download any build in the 1st post of this thread.
Also, no instructions related to the installation process.

mrpsanter1968 said:
There are no links to download any build in the 1st post of this thread.
Also, no instructions related to the installation process.
Click to expand...
Click to collapse
It is "Xiaomi Redmi 6A Guides, News, & Discussion" topic : so what's the big deal ?
Beside of that there's a link given few posts before ; and if you google the name of the rom, you'll find their website.
Once you have flashed one or two custom roms, you recognize easily if you need to flash with a recovery or with fastboot commands.

[ROM][G96xF/N][ALEXNDR] * Q Beta6 ZTA9 * DevBase v7.1 * Encryption support [Jan-15]

I'M NOT RESPONSIBLE FOR ANY DAMAGE AND/OR DATA LOSS AS A RESULT OF FLASHING THIS ROM !!!
PLEASE PERFORM FULL BACKUP IN THE MICRO SD CARD OR IN AN EXTERNAL STORAGE BEFORE YOU TRY !!!
Do you need reliability and predictability? Then better stay with THIS ROM
I have decided to create a separate thread because:
- I would like to distinguish Android Q BETA bug reports from my normal (Pie stable) thread, mentioned above
- It is normal that there will be definitely much more "bad reports" here, because most of them will be "beta related"
This thread will be closed when Samsung will release stable Android Q (One UI 2.0)
Everything you will need to know about DevBase ROM in general - you will find in my stable thread (mentioned above)
Differences comparing to stable Oreo DevBase ROM:
- No AppLock (yet)
S9 (SM-G960F/DS/FD):
>> G960FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9 Korean (SM-G960N):
>> [nobody sent me a dump yet] <<
Click to expand...
Click to collapse
S9+ Korean (SM-G965N):
>> G965NKSU2ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
Dirty flash over my Pie DevBase ROM SHOULD WORK WITHOUT ISSUES but before you try - I would highly recommend you to set default (stock) theme and default (stock) icons !!! However - I would recommend you clean install (Wipe -> Swipe to Factory Reset is enough)
NOTE1: This time it is mandatory to update also bootloader to Q - otherwise ROM will not boot
>> BL_G960FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965NKSU2ZTA9.zip <<
Click to expand...
Click to collapse
NOTE2: If you want to perform clean install with encryption - it is highly recommended to use TWRP 3.2.3.0 to format /data. More info about bug with TWRP 3.3.1.x - HERE
Known issues:
- SafetyNet does not pass (it is intended by Samsung in beta builds)
- Please let me know
Thanks to:
- all users mentioned in my main thread
- @henklbr for links to update.zip(s)
- @corsicanu & @ambasadii for tips related to Q beta

Do you want to provide dump (e.g. for G960F or a newer version for G965F)?
Please do as follow:
- Make sure OEM unlock is ON
- Flash TWRP but don't let device boot to system after that - use power+bixby+vol_up combo immediately after phone rebooted automatically
- Tap "Keep read only"
- Wipe -> Format data -> "yes"
- Reboot -> Recovery
- Copy attached zip to the device
- Flash it and wait a few minutes
- Copy /sdcard/G960F_dump directory to the PC and compresss it (zip / 7z / rar / etc..)
- Share me and wait for a new Q build
NOTE: DO NOT use Magisk or other boot patchers before you run my zip - I need PURE clean kernel and other images !!! After you run my zip and copy result to PC - you can do what you want

G960F? ????????

Wow, this is fast. Even though this just a test, I'll try and report soon
Sent from my SM-G965F using Tapatalk

Unable to flash magisk

Bookmark wait for more feedback

I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?

PrinceLc said:
Unable to flash magisk
Click to expand...
Click to collapse
Magisk is on board, there is no need to flash it separately
Ronam said:
I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?
Click to expand...
Click to collapse
First ROM, then BL (one by one). This order is recommended because BL update forces auto reboot

_alexndr said:
Magisk is on board, there is no need to flash it separately
First ROM, then BL (one by one). Ci order is required because BL update forces auto reboot
Click to expand...
Click to collapse
Thanks, i'll try it.

I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour

_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
What's that issue? I've had Soldier's Pie ROM before this one.

Ronam said:
What's that issue? I've had Soldier's Pie ROM before this one.
Click to expand...
Click to collapse
CSC just remain from Pie and CscFeatures does not work - you can dirty install RC2 to fix it
_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
Just updated to RC2
Please re-download the ZIP file and re-flash the ROM

Can you make exposed work, the modules won't load

Mirror link? Mega stack at 44%

And where is TWRP 3.2.3.0

All fine flashed rc2 over soldier pie rom dirty

Thread has been updated again
This time due to new Beta 5 (ZSLG)
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZSLG_DevBase_v7.0_RC2.zip <<
Click to expand...
Click to collapse
Leejhay1714 said:
Mirror link? Mega stack at 44%
Click to expand...
Click to collapse
I will upload it also to AFH
amakuramio said:
And where is TWRP 3.2.3.0
Click to expand...
Click to collapse
G965F:
https://eu.dl.twrp.me/star2lte/
G960F:
https://eu.dl.twrp.me/starlte/

Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.

galaxy mini said:
Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.
Click to expand...
Click to collapse
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:

_alexndr said:
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:
Click to expand...
Click to collapse
Are You still waiting on a dump for s9?
Isn't there a way we can edit the props to install on s9?